Argo Graphene Solutions Corp. Milestone Test Pour and Launches Second Graphene-Enhanced Concrete Project
Argo Graphene Solutions Corp (OTCQB: ARLSF) completed a milestone graphene-infused concrete test pour in Bristol, Tennessee and has launched a second, larger pour at the same site.
The first pour covered 12.5 cubic meters across three slabs; the follow-up will place 15 cubic meters across two on-grade slabs (25x40 ft and 20x35 ft). Argo expects up to +30% compressive, +30% tensile, and +29% flexural strength improvements and will run ASTM C39 compressive tests on cylinders at Days 7, 14, 21, 28 and 56. Early feedback noted improved tensile strength and workability; full lab results are pending.
Argo Graphene Solutions Corp (OTCQB: ARLSF) ha completato un colata di prova di calcestruzzo infuso di grafene a Bristol, Tennessee, e ha avviato una seconda colata, più grande, nello stesso sito.
La prima colata ha coperto 12,5 metri cubi su tre lastre; la colata successiva poserà 15 metri cubi su due lastre a livello (25x40 ft e 20x35 ft). Argo prevede fino a +30% di resistenza compressiva, +30% di resistenza a trazione e +29% di resistenza alla flessione e realizzerà test di compressione ASTM C39 su cilindri ai giorni 7, 14, 21, 28 e 56. I primi riscontri hanno indicato un miglioramento della resistenza a trazione e della lavorabilità; i risultati completi di laboratorio sono in attesa.
Argo Graphene Solutions Corp (OTCQB: ARLSF) completó un vertido de concreto con grafeno en Bristol, Tennessee y ha lanzado un segundo vertido, más grande, en el mismo sitio.
El primer vertido cubrió 12,5 metros cúbicos en tres losas; el siguiente colocará 15 metros cúbicos en dos losas de nivel (25x40 ft y 20x35 ft). Argo espera mejoras de hasta +30% en compresión, +30% en tensión y +29% en flexión, y realizará pruebas de compresión ASTM C39 en cilindros en los días 7, 14, 21, 28 y 56. Los primeros comentarios señalaron mayor resistencia a la tracción y trabajabilidad; los resultados de laboratorio completos están pendientes.
Argo Graphene Solutions Corp (OTCQB: ARLSF)은 테네시 주 브리스톨에서 그래핀 강화 콘크리트의 이정표 테스트 주입을 완료했고 같은 현장에서 두 번째로 더 큰 주입을 시작했습니다.
첫 주입은 12.5 입방미터를 세 개의 슬래브에 걸쳐 커버했고, 후속 주입은 15 입방미터를 두 개의 온그레이드 슬래브(25x40 ft, 20x35 ft)에 시행할 예정입니다. Argo는 최대 +30%의 압축강도, +30%의 인장강도, +29%의 굽힘강도 향상을 기대하며, 7일, 14일, 21일, 28일, 56일에 ASTM C39 압축 시험을 실린더로 수행합니다. 조기 피드백은 인장강도와 작업성의 개선을 시사했고, 전체 실험실 결과는 보류 중입니다.
Argo Graphene Solutions Corp (OTCQB: ARLSF) a réalisé une coulée de béton infusé de graphène à Bristol, Tennessee et a lancé une deuxième coulée, plus grande, au même endroit.
La première coulée a couvert 12,5 mètres cubes sur trois dalles; la suivante déposera 15 mètres cubes sur deux dalles de surface au niveau (25x40 ft et 20x35 ft). Argo prévoit des améliorations allant jusqu'à +30% de résistance à la compression, +30% de résistance à la traction et +29% de résistance à la flexion, et réalisera des essais de compression selon la norme ASTM C39 sur des cylindres aux jours 7, 14, 21, 28 et 56. Les premiers retours ont noté une résistance à la traction améliorée et une meilleure maniabilité; les résultats complets du laboratoire sont en attente.
Argo Graphene Solutions Corp (OTCQB: ARLSF) hat einen Meilenstein im Graphen-behafteten Beton-Testguss in Bristol, Tennessee abgeschlossen und am selben Standort einen zweiten, größeren Guss gestartet.
Der erste Guss umfasste 12,5 Kubikmeter über drei Platten; der folgende Guss wird 15 Kubikmeter auf zwei Ebenplatten (25x40 ft und 20x35 ft) aufbringen. Argo erwartet Verbesserungen von bis zu +30% Druckfestigkeit, +30% Zugfestigkeit und +29% Biegefestigkeit und wird ASTM C39-Drucktests an Zylindern an Tagen 7, 14, 21, 28 und 56 durchführen. Frühes Feedback vermerkte verbesserte Zugfestigkeit und Verarbeitbarkeit; vollständige Laborergebnisse stehen noch aus.
Argo Graphene Solutions Corp (OTCQB: ARLSF) أكملت صب اختبار ملموسة مُحسّنة بالجرافيين في برستل، تينيسي وأطلقت صباً ثانياً وأكبر في نفس الموقع.
غطّى الصب الأول 12.5 متر مكعب عبر ثلاث صفائح؛ سيضع الصب التالي 15 متر مكعب عبر لوحين سطحين (25x40 قدم و20x35 قدم). تتوقع أرغو حتى +30% في المقاومة الانضغاطية، و +30% في قوة الشد، و +29% في مقاومة الانثناء، وستجري اختبارات الضغط ASTM C39 على الأسطوانات في الأيام 7 و14 و21 و28 و56. أشارت الملاحظات المبكرة إلى تحسن في قوة الشد وقابلية العمل؛ النتائج المختبرية الكاملة قيد الانتظار.
Argo Graphene Solutions Corp (OTCQB: ARLSF) 已在田纳西州布里斯托尔完成了石墨烯增强混凝土的里程碑测试浇筑，并在同一地点启动了第二次、规模更大的浇筑。
首次浇筑覆盖 12.5 立方米，跨越三块板；后续将分配 15 立方米，在两个地面板（25x40 英尺和 20x35 英尺）上浇筑。Argo 预计压缩强度提升最多 +30%、抗拉强度提升 +30%、抗弯强度提升 +29%，并将在第 7、14、21、28、56 天对圆柱体进行 ASTM C39 压缩测试。早期反馈指出抗拉强度和加工性有所改善；完整实验室结果待定。
- Test scale: 12.5 m3 initial pour completed
- Expanded follow-up: 15 m3 across two larger slabs
- Targeted strength gains: up to 30% compressive and 30% tensile
- Structured validation: ASTM C39 tests at Days 7,14,21,28,56
- Final ASTM C39 compressive results are pending, no confirmed lab data yet
- Current pours are pilot-scale (27.5 m3 total), not full commercial deployment
Vancouver, British Columbia--(Newsfile Corp. - October 23, 2025) - Argo Graphene Solutions Corp. (CSE: ARGO) (OTCQB: ARLSF) (FSE: 94Y) ("Argo" or the "Company"), a leader in innovative graphene-based technologies announces the successful completion of its first graphene-infused concrete test pour in Bristol, Tennessee. President and CEO, Scott Smale, attended the event to witness, first hand, Argo's dedication to revolutionizing construction with innovative graphene technology.
Following the initial pour—covering three slabs totaling 12.5 cubic meters—Argo has swiftly launched its second pour at the same site. Partnering with local construction experts, this expanded project will yield 15 cubic meters across two larger on-grade slabs: one measuring 25 feet by 40 feet and the other 20 feet by 35 feet. The increased scale is designed to demonstrate the full potential of Argo's proprietary graphene formula, which boosts concrete strength, minimizes cracking, and reduces environmental footprint versus conventional mixes.
The addition of graphene—a single layer of carbon atoms known for its exceptional strength and conductivity—transforms traditional concrete into a high-performance material. At low concentrations (typically 0.01
To rigorously validate these advantages, Argo will perform comprehensive compressive strength testing on cylinder samples from both pours at intervals of Days 7, 14, 21, 28, and 56. Compressive strength tests, conducted per ASTM C39 standards, measure a material's ability to withstand crushing forces by applying a controlled load to cylindrical samples until failure, yielding results in megapascals (MPa). Early feedback from the first pour shows notable improvements in tensile strength and workability, with complete results expected soon.
"This second pour marks a pivotal step in transforming graphene-enhanced concrete from innovation to industry standard," said Scott Smale, President and CEO of Argo Graphene Solutions Corp. "Witnessing the concrete characteristics during the pours and our technology take shape on-site was exhilarating and reaffirms our mission to build stronger, more sustainable infrastructure worldwide."
About Argo Graphene Solutions Corp.
Argo Graphene Solutions Corp. is a Canadian advanced materials company dedicated to developing sustainable high-performance solutions for the construction and agricultural industries. Through subsidiaries like Argo Green Concrete Solutions Inc. Argo leverages cutting-edge graphene technologies to create eco-friendly products that address global challenges in infrastructure renewal and carbon reduction.
For further information, please contact:
Scott Smale, CEO
Argo Graphene Solutions Corp.
Email: scott.smale@argographene.com
Phone: 306-596-2673
Website: www.argographene.com
Linkedin: https://www.linkedin.com/company/97315371/admin/dashboard/
Instagram: https://www.instagram.com/argographene/
Facebook: https://www.facebook.com/argographene/
X / Twitter: https://x.com/ArgoGraphene
The Canadian Securities Exchange has not reviewed this press release and does not accept responsibility for its adequacy or accuracy.
Forward-Looking Statements
Certain information in this press release constitutes "forward-looking information" under Canadian securities legislation, including statements regarding the development of Argo's technology and the creation of eco-friendly products. Forward-looking statements are based on management's opinions and estimates as of the date of this release and are subject to known and unknown risks, uncertainties, and other factors that may cause actual results to differ materially. These factors include, but are not limited to, the receipt of necessary regulatory approvals. Argo undertakes no obligation to update forward-looking statements except as required by applicable securities laws. Readers should not place undue reliance on forward-looking information.
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/271559
FAQ
What did Argo announce on October 23, 2025 about ARLSF concrete testing?
What strength improvements does ARLSF claim for graphene-enhanced concrete?
When will ARLSF run compressive strength tests and to which standard?
How large are the slabs in Argo’s second graphene concrete pour?
Has ARLSF published final laboratory results from the Bristol pours?
What early performance observations did Argo report for ARLSF graphene concrete?
