CoTec Holdings Corp. Notes HyProMag USA Purchases Inserma Pre-Processing Units for Texas, Nevada And South Carolina Rare Earth Magnet Recycling Hubs in The United States
CoTec Holdings (OTCQB:CTHCF) announced that its U.S. joint venture, HyProMag USA, has acquired three skid-mounted Inserma Anoia S.L magnet and PCB separation units for rare earth permanent magnet recycling operations. These units will be strategically positioned across Texas, Nevada, and South Carolina recycling hubs.
The Inserma units are designed to be co-located at hyperscale data centers, shredding, and recycling facilities, offering a closed-loop and secure recycling network within the United States. The company emphasizes that this technology provides a competitive advantage in feedstock processing and supports their magnet recycling and manufacturing facilities with lowest cost and carbon footprint.
CoTec Holdings (OTCQB:CTHCF) ha annunciato che la sua joint venture statunitense, HyProMag USA, ha acquisito tre unità mobili di separazione magnetica e PCB Inserma Anoia S.L per operazioni di riciclo di magneti permanenti rari. Queste unità saranno strategicamente posizionate nei centri di riciclo Texas, Nevada e South Carolina.
Le unità Inserma sono progettate per essere integrate in data center iperscalari, impianti di triturazione e riciclo, offrendo una rete di riciclo chiusa e sicura all’interno degli Stati Uniti. L’azienda sottolinea che questa tecnologia offre un vantaggio competitivo nel processamento dei feedstock e sostiene i propri impianti di riciclo e produzione di magneti con costi più bassi e minore impronta di carbonio.
CoTec Holdings (OTCQB:CTHCF) anunció que su empresa conjunta estadounidense, HyProMag USA, ha adquirido tres unidades móviles de separación de imanes y PCB de Inserma Anoia S.L para operaciones de reciclaje de imanes de tierras raras. Estas unidades se ubicarán estratégicamente en los hubs de reciclaje de Texas, Nevada y Carolina del Sur.
Las unidades Inserma están diseñadas para ubicarse junto a centros de datos de gran escala, instalaciones de trituración y reciclaje, proporcionando una red de reciclaje cerrada y segura dentro de Estados Unidos. La compañía destaca que esta tecnología ofrece una ventaja competitiva en el procesamiento de materias primas y apoya sus plantas de reciclaje y fabricación de imanes con el menor costo y la menor huella de carbono.
CoTec Holdings (OTCQB:CTHCF)가 미국 합작법인 HyProMag USA가 드문 지재 자석 및 PCB 분리 유닛 세트를 Inserma Anoia S.L로부터 인수했다고 발표했습니다. 이 유닛들은 텍사스, 네바다, 사우스캐롤라이나의 재활용 허브에 전략적으로 배치될 예정입니다.
Inserma 유닛은 초대형 데이터 센터, 파쇄 및 재활용 시설과 함께 운영되도록 설계되었으며, 미국 내 폐쇄 루프의 안전한 재활용 네트워크를 제공합니다. 회사는 이 기술이 원료 처리에서 경쟁 우위를 제공하고 자사 자석 재활용 및 제조 시설을 가장 낮은 비용과 탄소 발자국으로 지원한다고 강조합니다.
CoTec Holdings (OTCQB:CTHCF) a annoncé que sa coentreprise américaine, HyProMag USA, a acquis trois unités mobiles d’aimants et de séparation de PCB Inserma Anoia S.L pour des opérations de recyclage de aimants permanents rares. Ces unités seront stratégiquement positionnées dans les pôles de recyclage Texas, Nevada et South Carolina.
Les unités Inserma sont conçues pour être mutualisées avec des centres de données à hyperscale, des installations de broyage et de recyclage, offrant un réseau de recyclage fermé et sécurisé aux États‑Unis. L’entreprise souligne que cette technologie offre un avantage concurrentiel dans le traitement des matières premières et soutient ses installations de recyclage et de fabrication de aimants avec les coûts les plus bas et l’empreinte carbone la plus faible.
CoTec Holdings (OTCQB:CTHCF) gab bekannt, dass sein US-amerikanisches Joint Venture HyProMag USA drei fahrbare Inserma Anoia S.L Magnet- und Leiterplattentrennungs-Einheiten für das Recycling von Seltenen-Erden-Magneten erworben hat. Diese Einheiten werden strategisch in den Recycling-Hubs von Texas, Nevada und South Carolina positioniert.
Die Inserma-Einheiten sind darauf ausgelegt, an hyperscale Rechenzentren, Zerkleinerungs- und Recyclinganlagen gemeinsam genutzt zu werden, und bieten ein geschlossenes, sicheres Recycling-Netzwerk in den USA. Das Unternehmen betont, dass diese Technologie einen Wettbewerbsvorteil bei der Verarbeitung von Rohstoffen bietet und ihre Magnet-Recycling- und Fertigungsanlagen mit geringsten Kosten und kleinstem CO2-Fußabdruck unterstützt.
CoTec Holdings (OTCQB:CTHCF) أعلن أن مشروعه المشترك الأمريكي، HyProMag USA، استوعب ثلاث وحدات فصل مغناطيسي ولوحات PCB متنقلة من Inserma Anoia S.L لعمليات إعادة تدوير مغناطيسات فريدة من نوعها. سيتم وضع هذه الوحدات استراتيجيًا في مراكز إعادة التدوير في تكساس، نيفادا، وكولورادو؟
تم تصميم وحدات Inserma لتكون مضافة على مقربة من مراكز البيانات ذات السعات العالية، ومرافق التمزيق وإعادة التدوير، مقدّمة شبكة تدوير مغلقة وآمنة داخل الولايات المتحدة. تشدد الشركة على أن هذه التقنية توفر ميزة تنافسية في معالجة المواد الأولية وتدعم مرافق إعادة التدوير وتصنيع المغناطيسات لديها بأقل تكلفة وأثر كربوني.
CoTec Holdings (OTCQB:CTHCF)宣布，其在美合资企业 HyProMag USA 已从 Inserma Anoia S.L 收购了三套可移动的磁铁与 PCB 分离单元，用于稀土永磁材料回收业务。这些单元将战略性部署在 德州、内华达和南卡罗来纳的回收枢纽。
Inserma 单元设计为可与超大规模数据中心、粉碎与回收设施共同部署，提供美国境内的闭环安全回收网络。公司强调，该技术在原料加工方面具备 竞争优势，并以 最低成本与更低碳足迹支持其磁铁回收与制造设施。
- Strategic expansion into three key U.S. locations (Texas, Nevada, South Carolina) for rare earth magnet recycling
- Implementation of efficient pre-processing technology for competitive advantage
- Development of closed-loop recycling network with lowest cost and carbon footprint
- Potential partnerships with expanding hyperscale data center providers
- None.
VANCOUVER, BC / ACCESS Newswire / September 30, 2025 / CoTec Holdings Corp. (TSXV:CTH)(OTCQB:CTHCF) ("CoTec" or the "Company") is pleased to note today's press release by HyProMag USA, LLC ("HyProMag USA"), its U.S.-based joint venture rare earth permanent magnet recycling and manufacturing company.
HyProMag USA announced it has purchased three skid-mounted Inserma Anoia S.L ("Inserma") magnet and Printed Circuit Board ("PCB") separation units. The Inserma and PCB units can be co-located at hyperscale data centers, shredding, recycling or HyProMag facilities. These Inserma units rapidly remove (at <2 seconds per hard disk drive ("HDD")) the voice coil motor ("VCM") containing the rare earth magnet, providing a highly concentrated feed for subsequent Hydrogen Processing of Magnet Scrap ("HPMS") by HyProMag USA at the Texas facility. The technology package will further complete the separation and removal of the PCB, which contains precious metals, for recycling and sale. The three units will be located and operated by Intelligent Lifecycle Solutions, LLC ("ILS") as it continues stockpiling of feedstock for the Fort Worth facility.
Julian Treger, Chief Executive of CoTec commented: "We are very excited to see the rapid development of the Inserma partnership. Pre-processing technologies are a key enabler and competitive advantage for HyProMag USA as it progresses with the purchase of feedstock. The purchase of these Inserma units is the start of the roll-out of pre-processing technologies to support feedstock suppliers for our magnet recycling and manufacturing facilities. The Company is continuing to progress its discussions with the rapidly expanding hyperscale data center providers and offers a closed loop and secure recycling network within the United States at the lowest cost and lowest carbon footprint. Furthermore, the batch process design of the Texas facility with separate individual feedstock waste streams supports consistent finished grades of magnets and blocks.
For further information, please refer to HyProMag USA's press release, available at: www.hypromagusa.com
About HyProMag USA
HyProMag USA LLC is owned 50:50 by CoTec Holdings Corp. (TSXV:CTH)(OTCQB:CTHCF) ("CoTec") and HyProMag Limited. HyProMag Limited is 100 percent owned by Maginito Limited which is owned on a 79.4/20.6 percent basis by Mkango Resources Ltd. (AIM/TSXV:MKA) and CoTec.
About CoTec
CoTec Holdings Corp. (TSXV:CTH)(OTCQB:CTHCF) is redefining the future of resource extraction and recycling. Focused on rare earth magnets and strategic materials, CoTec integrates breakthrough technologies with strategic assets to unlock secure, sustainable, and low-cost supply chains for the United States and its allies.
CoTec's mission is clear: accelerate the energy transition while strengthening U.S. economic and national security. By investing in and deploying disruptive technologies, the Company delivers capital-efficient, scalable solutions that transform marginal assets, tailings, waste streams, and recycled products into high-value critical minerals.
From its HyProMag USA magnet recycling joint venture in Texas, to iron tailings reprocessing in Québec, to next-generation copper and iron solutions backed by global majors, CoTec is building a diversified portfolio with long-term growth, rapid cash flow potential, and high barriers to entry. The result is a game-changing platform at the intersection of technology, sustainability, and strategic materials.
For more information, please visit www.cotec.ca
For further information, please contact:
Braam Jonker - (604) 992-5600
Forward-Looking Information Cautionary Statement
Statements in this press release regarding the Company and its investments which are not historical facts are "forward-looking statements" which involve risks and uncertainties, including statements relating to the Company's interest in and the proposed expansion of HyProMag USA and management's expectations with respect to its current and potential future investments, including HyProMag USA, and the benefits to the Company which may be implied from such statements. Since forward-looking statements address future events and conditions, by their very nature, they involve inherent risks and uncertainties. Actual results in each case could differ materially from those currently anticipated in such statements, due to known and unknown risks and uncertainties affecting the Company, including but not limited to resource and reserve risks; environmental risks and costs; labor costs and shortages; uncertain supply and price fluctuations in materials; increases in energy costs; labor disputes and work stoppages; leasing costs and the availability of equipment; heavy equipment demand and availability; contractor and subcontractor performance issues; worksite safety issues; project delays and cost overruns; extreme weather conditions; and social and transport disruptions. For further details regarding risks and uncertainties facing the Company please refer to "Risk Factors" in the Company's filing statement dated April 6, 2022, a copy of which may be found under the Company's SEDAR profile at www.sedar.com. The Company assumes no responsibility to update forward-looking statements in this press release except as required by law. Readers should not place undue reliance on the forward-looking statements and information contained in this news release and are encouraged to read the Company's continuous disclosure documents which are available on SEDAR at www.sedarplus.ca.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.
SOURCE: CoTec Holdings Corp.
View the original press release on ACCESS Newswire
FAQ
What did HyProMag USA purchase for its recycling operations in 2025?
Where will CoTec Holdings (CTHCF) establish its rare earth magnet recycling hubs?
What are the advantages of HyProMag USA's recycling technology?
How will the Inserma units benefit CoTec's operations?
What types of facilities can the Inserma units be co-located with?
