Hurco Reports Fourth Quarter and Full Year Results for Fiscal Year 2025

Rhea-AI Summary

Hurco (Nasdaq: HURC) reported fiscal 2025 results for year ended October 31, 2025: a net loss of $15.12M (loss per diluted share $2.34) versus a net loss of $16.61M in fiscal 2024. Fourth-quarter net loss was $3.04M (Q4 2024: $1.44M). Fiscal 2025 sales were $178.55M, down 4% year-over-year; Q4 sales were $45.47M, down 15% year-over-year. Orders for fiscal 2025 were $171.29M, down 14% year-over-year. Cash and cash equivalents increased to $48.71M, up ≈$15M year-over-year. Management cited tariff headwinds, model mix shifts, cost reductions, and leadership changes while noting improved orders/sales in U.S. and Germany late in the year.

Positive

• Cash increased by approximately $15M year-over-year
• Working capital remained strong at $173.06M as of Oct 31, 2025
• Selling, general, and administrative expenses reduced by nearly $3M year-over-year
• Orders in Americas Q4 increased 4% versus Q4 2024

Negative

• Fiscal 2025 net loss of $15.12M (EPS -$2.34)
• Q4 2025 sales declined 15% year-over-year to $45.47M
• Fiscal 2025 orders declined 14% year-over-year to $171.29M
• Gross margin fell to 18% for fiscal 2025 from 20% in 2024 due to lower volume and tariffs

News Market Reaction

+4.69%

2 alerts

+4.69% News Effect

+$5M Valuation Impact

$112M Market Cap

0.1x Rel. Volume

On the day this news was published, HURC gained 4.69%, reflecting a moderate positive market reaction. Our momentum scanner triggered 2 alerts that day, indicating moderate trading interest and price volatility. This price movement added approximately $5M to the company's valuation, bringing the market cap to $112M at that time.

Data tracked by StockTitan Argus on the day of publication.

Key Figures

Q4 FY25 net loss: $3,041,000 (‑$0.47/sh) FY25 net loss: $15,117,000 (‑$2.34/sh) Q4 sales: $45,467,000 +5 more

8 metrics

Q4 FY25 net loss $3,041,000 (‑$0.47/sh) Fourth quarter fiscal 2025 vs $1,442,000 loss in Q4 2024

FY25 net loss $15,117,000 (‑$2.34/sh) Full fiscal year 2025 vs $16,608,000 loss in 2024

Q4 sales $45,467,000 Fourth quarter fiscal 2025, down 15% from $53,702,000 in 2024

FY25 sales $178,554,000 Fiscal 2025 sales vs $186,584,000 in fiscal 2024 (4% decrease)

Non‑cash tax allowances $4,778,000 and $8,590,000 Valuation allowances in FY25 and FY24 provisions for income taxes

Q4 orders $46,509,000 Fourth quarter fiscal 2025 orders, down 9% vs prior year

FY25 orders $171,290,000 Fiscal 2025 orders vs $198,302,000 in fiscal 2024 (14% decline)

Cash balance $48,713,000 Cash and cash equivalents as of October 31, 2025 vs $33,330,000 in 2024

Market Reality Check

Price: $17.85 Vol: Volume 16,945 is below 20...

low vol

$17.85 Last Close

Volume Volume 16,945 is below 20-day average of 33,109 (relative volume 0.51). low

Technical Price 16.42 is slightly below 200-day MA at 16.70, near longer-term trend.

Peers on Argus

HURC rose 0.74% while peers were mixed: OPTT up , SHMD up 12.62%, TAYD roughly f...

HURC rose 0.74% while peers were mixed: OPTT up , SHMD up 12.62%, TAYD roughly flat, NPWR up 0.74%, and XCH down 2.66%, suggesting stock-specific trading rather than a unified sector move.

Historical Context

2 past events · Latest: Nov 18 (Neutral)

Pattern 2 events

Date	Event	Sentiment	Move	Catalyst
Nov 18	Leadership transition	Neutral	+0.8%	Executive Chairman retirement timing with continued non-executive board role.
Sep 05	Quarterly earnings	Positive	+7.5%	Q3 FY25 loss improvement, higher sales, better margins despite weaker orders.

Pattern Detected

Limited history shows modest, directionally aligned reactions to corporate updates and earnings.

Recent Company History

Over recent months, Hurco highlighted leadership transition plans and challenging but stabilizing fundamentals. On Sep 05, 2025, Q3 FY25 results showed higher sales and improved margins but weaker orders, with a 7.49% share gain. On Nov 18, 2025, news of the Executive Chairman’s planned 2026 retirement and continued board role led to a modest 0.8% rise. Today’s FY25 loss and softer sales fit a narrative of cyclical pressure with ongoing operational adjustments.

Market Pulse Summary

This announcement details a wider net loss, lower sales, and weaker orders for fiscal 2025, partly o...

Analysis

This announcement details a wider net loss, lower sales, and weaker orders for fiscal 2025, partly offset by higher cash of $48.7M and reduced operating expenses. Recent history showed modestly positive reactions to leadership updates and mixed but improving quarterly results. Investors following this story may focus on geographic demand trends, gross margin impacts from tariffs, and whether order patterns in the Americas and Europe stabilize or improve in upcoming periods.

Key Terms

valuation allowance, deferred tax assets, working capital, computer numeric control (“CNC”) machine tools, +1 more

5 terms

valuation allowance financial

"non-cash tax valuation allowances of $4,778,000 and $8,590,000"

A valuation allowance is a reserve set aside to reduce the value of certain assets on a company's financial records when there is uncertainty about whether they will generate the expected benefits. It acts like a caution sign, indicating that some assets might not be fully recoverable or worth their recorded amount. This matters to investors because it provides a more realistic picture of a company's financial health and potential risks.

deferred tax assets financial

"valuation allowance recorded in fiscal year 2025 on U.S., China, and certain Italian deferred tax assets"

An item on a company’s balance sheet showing tax benefits it can use later to reduce future tax bills — think of it as an IOU from the tax system for past losses or timing differences. It matters to investors because it can boost future cash flow and apparent value if the company expects profits ahead, but those benefits vanish if the company cannot generate taxable income and the asset must be reduced.

working capital financial

"Working capital was $173,055,000 as of October 31, 2025"

Working capital is the money a business has available to cover its daily expenses, like paying bills and buying supplies. It’s like the cash in your wallet that helps you handle everyday costs; having enough ensures the business can operate smoothly without running into money shortages.

computer numeric control (“CNC”) machine tools technical

"sells its three brands of computer numeric control (“CNC”) machine tools"

Computer numeric control (CNC) machine tools are automated machines that follow digital instructions to cut, drill, shape or finish metal, plastic and other materials with high precision — like a digital recipe guiding a powered sculptor. They matter to investors because they are core capital equipment for manufacturing: productivity, product quality, and production speed tied to CNC use affect companies’ costs, ability to scale, supply-chain resilience, and long-term capital spending trends.

forward-looking statements regulatory

"Certain statements in this news release are forward-looking statements that involve known and unknown risks"

Forward-looking statements are predictions or plans that companies share about what they expect to happen in the future, like estimating sales or profits. They matter because they help investors understand a company's outlook, but since they are based on guesses and assumptions, they can sometimes be wrong.

AI-generated analysis. Not financial advice.

INDIANAPOLIS, Jan. 09, 2026 (GLOBE NEWSWIRE) -- Hurco Companies, Inc. (Nasdaq: HURC) today reported results for the fourth fiscal quarter and fiscal year ended October 31, 2025. Hurco recorded a net loss of $3,041,000, or $0.47 per diluted share, for the fourth quarter of fiscal year 2025, compared to a net loss of $1,442,000, or $0.23 per diluted share, for the corresponding period in fiscal year 2024. Hurco recorded a net loss of $15,117,000, or $2.34 per diluted share, for fiscal year 2025, compared to a net loss of $16,608,000, or $2.56 per diluted share, for fiscal year 2024. The recorded net losses for fiscal years 2025 and 2024, included non-cash tax valuation allowances of $4,778,000 and $8,590,000, respectively, recorded in provision for income taxes.

Sales and service fees for the fourth quarter of fiscal year 2025 were $45,467,000, a decrease of $8,235,000, or 15%, compared to the corresponding prior year period, and included a favorable currency impact of $882,000, or less than 2%, when translating foreign sales to U.S. dollars for financial reporting purposes. Sales and service fees for fiscal year 2025 were $178,554,000, a decrease of $8,030,000, or 4%, compared to fiscal year 2024, and included a favorable currency impact of $2,038,000, or 1%, when translating foreign sales to U.S. dollars for financial reporting purposes.

Greg Volovic, Chief Executive Officer, stated, “Our largest markets, the U.S. and Germany, ended the fiscal year with their strongest quarter of orders and sales for the year, reflecting a change in trend that developed during the second half of the year, with orders and sales improving by approximately 5% from the first half to the second half of the year. While this fiscal year was challenging given the headwinds from tariffs and the macro-economic conditions, we were committed to continuous improvement in our business strategy and implemented targeted leadership transitions in both the U.S. and Germany. Our new leaders bring deep industry experience with a strong focus on execution, customer engagement, and growth. Our results during this period highlight our focus on disciplined execution: we increased cash by approximately $15 million year over year and reduced selling, general, and administrative expenses by nearly $3 million year over year, all while we continued to invest in innovative technologies. As we look ahead to fiscal 2026, we believe Hurco is positioned to navigate the cycle with a strong balance sheet, an even stronger management team, and a product portfolio that supports long-term growth.”

The following table sets forth net sales and service fees by geographic region for the fourth quarter and fiscal year ended October 31, 2025, and 2024 (dollars in thousands):

	Three Months Ended										Fiscal Year Ended
	October 31,										October 31,
		2025		2024	$ Change			% Change				2025		2024	$ Change			% Change
Americas	$18,234		$23,331		($5,097		)	(22	)%		$68,604		$72,317		($3,713		)	(5	)%
Europe		23,475		25,381		(1,906	)	(8	)%			90,863		94,919		(4,056	)	(4	)%
Asia Pacific		3,758		4,990		(1,232	)	(25	)%			19,087		19,348		(261	)	(1	)%
Total	$45,467		$53,702		($8,235		)	(15	)%		$178,554		$186,584		($8,030		)	(4	)%

Sales in the Americas for the fourth quarter and fiscal year 2025 decreased by 22% and 5%, respectively, compared to the corresponding periods in fiscal year 2024, primarily due to a change in mix of machine model shipments in the fourth quarter. The decrease in sales was attributable to decreased shipments of Hurco 5-axis vertical machines and entry-level Hurco and Milltronics 3-axis machines, partially offset by increased sales of higher-performance Hurco 3-axis vertical machines and multi-axis lathes. Even though the mix of machine model shipments in the fourth quarter and fiscal year 2025 produced lower sales in dollars compared to the prior year periods, the overall volume of machine shipments in the Americas increased from 2024 to 2025 for the quarter and fiscal year.

European sales for the fourth quarter of fiscal year 2025 decreased by 8%, compared to the corresponding prior year period, and included a favorable currency impact of 4%, when translating foreign sales to U.S. dollars for financial reporting purposes. The year-over-year decrease in the fourth quarter in European sales was mainly due to a decreased volume of shipments of Hurco 5-axis vertical machines in the United Kingdom, Germany, and Italy, as well as decreased shipments of Milltronics machines throughout Europe. European sales for fiscal year 2025 decreased by 4%, compared to fiscal year 2024, and included a favorable currency impact of 2%, when translating foreign sales to U.S. dollars for financial reporting purposes. The year-over-year decrease in European sales was primarily attributable to a decreased volume of shipments of Hurco 5-axis vertical machines and entry-level Hurco 3-axis machines in Germany and France, and of electro-mechanical components and accessories manufactured by LCM Precision Technologies S.r.l. (“LCM”), partially offset by an increased volume of shipments of Hurco machines in the United Kingdom.

Asian Pacific sales for the fourth quarter and fiscal year 2025 decreased by 25% and 1%, respectively, compared to the corresponding periods in fiscal year 2024, and each period included an unfavorable currency impact of less than 1%, when translating foreign sales to U.S. dollars for financial reporting purposes. The decreases in Asian Pacific sales in both periods were primarily due to decreases in sales of Hurco machines in India and China, partially offset by increased sales of Takumi machines in the Asia Pacific region generally.

Orders for the fourth quarter of fiscal year 2025 were $46,509,000, a decrease of $4,568,000, or 9%, compared to the corresponding period in fiscal year 2024, and included a favorable currency impact of $839,000, or 2%, when translating foreign orders to U.S. dollars. Orders for fiscal year 2025 were $171,290,000, a decrease of $27,012,000, or 14%, compared to fiscal year 2024, and included a favorable currency impact of $1,761,000, or less than 1%, when translating foreign orders to U.S. dollars.

The following table sets forth new orders booked by geographic region for the fourth fiscal quarter and fiscal year ended October 31, 2025, and 2024 (dollars in thousands):

	Three Months Ended										Fiscal Year Ended
	October 31,										October 31,
		2025		2024	$ Change			% Change				2025		2024	$ Change			% Change
Americas	$22,003		$21,221		$782			4	%		$69,148		$76,711		($7,563		)	(10	)%
Europe		20,839		23,876		(3,037	)	(13	)%			81,569		99,633		(18,064	)	(18	)%
Asia Pacific		3,667		5,980		(2,313	)	(39	)%			20,573		21,958		(1,385	)	(6	)%
Total	$46,509		$51,077		($4,568		)	(9	)%		$171,290		$198,302		($27,012		)	(14	)%

Orders in the Americas for the fourth quarter of fiscal year 2025 increased by 4%, compared to the corresponding period in fiscal year 2024. The increase in orders was primarily due to increased customer demand for Hurco and Takumi machines, partially offset by decreased demand for Milltronics toolroom and 3-axis vertical machines and non-Hurco branded machine tools sold by one of our wholly owned distributors. Orders in the Americas for fiscal year 2025 decreased by 10%, compared to fiscal year 2024. The decrease in orders was primarily due to a shift in customer demand from Hurco 5-axis vertical machines, Milltronics toolroom and 3-axis vertical machines, and non-Hurco branded machine tools sold by one of our wholly owned distributors, to a higher volume of Hurco lathes and entry-level and higher-performance Hurco 3-axis vertical machines.

European orders for the fourth quarter and fiscal year 2025 decreased by 13% and 18%, respectively, compared to the corresponding prior year periods, and included a favorable currency impact of 4% and 2%, respectively, when translating foreign orders to U.S. dollars. The year-over-year decreases in orders in both periods were driven primarily by decreased customer demand for Hurco and Takumi machines in the United Kingdom, Germany, and France, as well as decreased demand for electro-mechanical components and accessories manufactured by LCM.

Asian Pacific orders for the fourth quarter and fiscal year 2025 decreased by 39% and 6%, respectively, compared to the corresponding prior year periods, and each period included an unfavorable currency impact of less than 1% when translating foreign orders to U.S. dollars. The decreases in Asian Pacific orders in both periods were driven primarily by decreased customer demand for Hurco machines in China and India.

Gross profit for the fourth quarter of fiscal year 2025 was $7,749,000, or 17% of sales, compared to $12,186,000, or 23% of sales, for the corresponding prior year period. Gross profit for fiscal year 2025 was $32,980,000, or 18% of sales, compared to $37,743,000, or 20% of sales, for fiscal year 2024. The year-over-year decreases were primarily due to the lower overall sales volume of vertical milling machines and the change in mix and volume from higher-performance 5-axis machines to 3-axis machines in the Americas and Europe. Additionally, gross profit in both periods was negatively impacted by an increase in cost of goods sold as a result of tariffs on goods imported into the U.S. implemented in the second half of fiscal year 2025. The decrease in overall sales dollars and the increase in tariffs negatively impacted gross profit in dollars and percentage of sales, reducing the leverage of fixed costs, in comparison to the corresponding prior year periods.

Selling, general, and administrative expenses for the fourth quarter of fiscal year 2025 were $11,207,000, or 25% of sales, compared to $12,677,000, or 24% of sales, in the corresponding fiscal year 2024 period, and included an unfavorable currency impact of $186,000, when translating foreign expenses to U.S. dollars for financial reporting purposes. Selling, general, and administrative expenses for fiscal year 2025 were $43,248,000, or 24% of sales, compared to $46,029,000, or 25% of sales, in fiscal year 2024, and included an unfavorable currency impact of $407,000, when translating foreign expenses to U.S. dollars for financial reporting purposes. The year-over-year reductions in selling, general, and administrative expenses in both periods were primarily due to decreased tradeshow costs due to IMTS being in the fourth quarter of fiscal year 2024 and additional global cost reductions that we have implemented over the last twelve months during the continued recessed period of sales. Despite the reductions from an absolute dollar perspective, selling, general, and administrative expenses increased as a percentage of sales in the fourth quarter, compared to the corresponding prior year period, due to the lower volume of sales year-over-year.

Income taxes recorded during the fourth quarter and fiscal year 2025 were a benefit of $178,000 and an expense of $2,948,000, respectively, compared to expenses of $320,000 and $6,758,000 for the corresponding periods in fiscal year 2024. The year-over-year decreases in annual income tax expenses were primarily due to an $8,449,000 non-cash change in valuation allowance recorded in the prior year on U.S. and China deferred tax assets, compared to a $4,821,000 non-cash change in valuation allowance recorded in fiscal year 2025 on U.S., China, and certain Italian deferred tax assets. Additionally, income taxes were also impacted by a change in geographic mix of income and loss that includes jurisdictions with differing tax rates and discrete items related to unvested stock compensation. We have a $13,244,000 full valuation allowance recorded against our U.S., Chinese and certain Italian deferred tax assets, and we did not record a tax benefit for our net losses in these countries.

Cash and cash equivalents totaled $48,713,000 as of October 31, 2025, compared to $33,330,000 as of October 31, 2024. Working capital was $173,055,000 as of October 31, 2025, compared to $180,788,000 as of October 31, 2024. The decrease in working capital was primarily driven by decreases in inventories and accounts receivable, net, as well as increases in accounts payable and derivative liabilities, partially offset by an increase in cash and cash equivalents.

Hurco Companies, Inc. is an international, industrial technology company that sells its three brands of computer numeric control (“CNC”) machine tools to the worldwide metal cutting and metal forming industry. Two of the Company’s brands of machine tools, Hurco and Milltronics, are equipped with interactive controls that include software that is proprietary to each respective brand. The Company designs these controls and develops the software. The third brand of CNC machine tools, Takumi, is equipped with industrial controls that are produced by third parties, which allows the customer to decide the type of control added to the Takumi CNC machine tool. The Company also produces high-value machine tool components and accessories and provides automation solutions that can be integrated with any machine tool. The end markets for the Company's products are independent job shops, short-run manufacturing operations within large corporations, and manufacturers with production-oriented operations. The Company’s customers manufacture precision parts, tools, dies, and/or molds for industries such as aerospace, defense, medical equipment, energy, transportation, and computer equipment. The Company is based in Indianapolis, Indiana, with manufacturing operations in Taiwan, Italy, and the U.S., and sells its products through direct and indirect sales forces throughout the Americas, Europe, and Asia. The Company has sales, application engineering support and service subsidiaries in China, the Czech Republic, England, France, Germany, India, Italy, the Netherlands, Poland, Singapore, the U.S., and Taiwan. Web Site: www.hurco.com.

Certain statements in this news release are forward-looking statements that involve known and unknown risks, uncertainties, and other factors that may cause our actual results, performance, or achievements to be materially different from any future results, performance, or achievements expressed or implied by such forward-looking statements. These factors include, among others, the cyclical nature of the machine tool industry; uncertain economic conditions, which may adversely affect overall demand, in the Americas, Europe and Asia Pacific markets; the risks of our international operations; governmental actions, initiatives and regulations, including import and export restrictions, duties and tariffs and changes to tax laws; the effects of changes in currency exchange rates; competition with larger companies that have greater financial resources; our dependence on new product development; the need and/or ability to protect our intellectual property assets; the limited number of our manufacturing and supply chain sources; increases in the prices of raw materials, especially steel and iron products; the effect of the loss of members of senior management and key personnel; our ability to integrate acquisitions; acquisitions that could disrupt our operations and affect operating results; failure to comply with data privacy and security regulations; breaches of our network and system security measures; possible obsolescence of our technology and the need to make technological advances; impairment of our assets; negative or unforeseen tax consequences; uncertainty concerning our ability to use tax loss carryforwards; changes in the SOFR rate; the impact of the COVID-19 pandemic and other public health epidemics and pandemics on the global economy, our business and operations, our employees and the business, operations and economies of our customers and suppliers; and other risks and uncertainties discussed more fully under the caption “Risk Factors” in our filings with the Securities and Exchange Commission. We expressly disclaim any obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

Contact: Sonja K. McClelland
Executive Vice President, Treasurer, & Chief Financial Officer
317-293-5309

Hurco Companies, Inc.
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except per share data)
	Three Months Ended								Fiscal Year Ended
	October 31,								October 31,
		2025				2024				2025				2024
	(unaudited)								(unaudited)
Sales and service fees	$	45,467			$	53,702			$	178,554			$	186,584
Cost of sales and service		37,718				41,516				145,574				148,841
Gross profit		7,749				12,186				32,980				37,743
Selling, general and administrative expenses		11,207				12,677				43,248				46,029
Operating (loss) income		(3,458	)			(491	)			(10,268	)			(8,286	)
Interest expense		23				152				89				578
Interest income		17				129				256				621
Investment income		116				(46	)			302				80
Other (expense) income, net		129				(562	)			(2,370	)			(1,687	)
(Loss) income before taxes		(3,219	)			(1,122	)			(12,169	)			(9,850	)
Provision (benefit) for income taxes		(178	)			320				2,948				6,758
Net (loss) income		(3,041	)			(1,442	)			(15,117	)			(16,608	)
(Loss) income per common share
Basic	$	(0.47	)		$	(0.23	)		$	(2.34	)		$	(2.56	)
Diluted	$	(0.47	)		$	(0.23	)		$	(2.34	)		$	(2.56	)
Weighted average common shares outstanding
Basic		6,402				6,440				6,456				6,489
Diluted		6,402				6,440				6,456				6,489
Dividends per share	$	-			$	-			$	-			$	0.32
OTHER CONSOLIDATED FINANCIAL DATA
	Three Months Ended								Fiscal Year Ended
	October 31,								October 31,
Operating Data:		2025				2024				2025				2024
	(unaudited)								(unaudited)
Gross margin		17	%			23	%			18	%			20	%
SG&A expense as a percentage of sales		25	%			24	%			24	%			25	%
Operating (loss) income as a percentage of sales		-8	%			-1	%			-6	%			-4	%
Pre-tax (loss) income as a percentage of sales		-7	%			-2	%			-7	%			-5	%
Effective tax rate		6	%			-29	%			-24	%			-69	%
Depreciation and amortization	$	691			$	854			$	2,691			$	3,532
Capital expenditures	$	733			$	830			$	3,021			$	2,876
Balance Sheet Data:	10/31/2025				10/31/2024
Working capital	$	173,055			$	180,788
Days sales outstanding		42				49
Inventory turns		1.0				1.0
Capitalization
Total debt		--				--
Shareholders' equity		198,787				207,172
Total	$	198,787			$	207,172

Hurco Companies, Inc.
CONDENSED CONSOLIDATED BALANCE SHEETS
(In thousands, except share and per share data)
	October 31,				October 31,
		2025				2024
ASSETS	(unaudited)
Current assets:
Cash and cash equivalents	$	48,713			$	33,330
Accounts receivable, net		27,928				36,678
Inventories		142,931				153,037
Derivative assets		263				323
Prepaid and other assets		5,243				5,209
Total current assets		225,078				228,577
Property and equipment:
Land		1,046				1,046
Building		7,381				7,381
Machinery and equipment		26,061				28,106
Leasehold improvements		4,569				4,667
		39,057				41,200
Less accumulated depreciation and amortization		(31,083	)			(32,404	)
Total property and equipment, net		7,974				8,796
Non-current assets:
Software development costs, less accumulated amortization		8,090				7,044
Intangible assets, net		627				763
Operating lease - right of use assets, net		11,560				11,313
Deferred income taxes		794				1,349
Investments		9,005				8,216
Other assets		1,170				2,585
Total non-current assets		31,246				31,270
Total assets	$	264,298			$	268,643
LIABILITIES AND SHAREHOLDERS' EQUITY
Current liabilities:
Accounts payable	$	26,074			$	24,951
Customer deposits		4,788				4,308
Derivative liabilities		3,084				705
Operating lease liabilities		4,374				3,829
Accrued payroll and employee benefits		7,474				7,786
Accrued income taxes		1,472				866
Accrued expenses		3,790				4,258
Accrued warranty expenses		967				1,086
Total current liabilities		52,023				47,789
Non-current liabilities:
Deferred income taxes		38				53
Accrued tax liability		-				537
Operating lease liabilities		7,560				7,852
Deferred credits and other		5,890				5,240
Total non-current liabilities		13,488				13,682
Commitment and contingencies		-				-
Shareholders' equity:
Preferred stock: no par value per share, 1,000,000 shares authorized; no shares issued		-				-
Common stock: no par value, $.10 stated value per share, 12,500,000 shares authorized; 6,569,224 and 6,548,838 shares issued and 6,402,396 and 6,435,624 shares outstanding, as of October 31, 2025 and October 31, 2024, respectively		640				644
Additional paid-in capital		60,850				61,500
Retained earnings		146,305				161,422
Accumulated other comprehensive loss		(9,008	)			(16,394	)
Total shareholders' equity		198,787				207,172
Total liabilities and shareholders' equity	$	264,298			$	268,643

FAQ

What were Hurco's (HURC) net loss and EPS for fiscal 2025 reported on Jan 9, 2026?

Hurco reported a fiscal 2025 net loss of $15.12M, or $2.34 per diluted share.

How did Hurco's sales for fiscal year 2025 compare to 2024 (Nasdaq: HURC)?

Fiscal 2025 sales were $178.55M, a 4% decrease versus fiscal 2024.

What was Hurco's cash position as of October 31, 2025 and why does it matter for HURC investors?

Cash and cash equivalents were $48.71M as of Oct 31, 2025, improving liquidity and flexibility going into fiscal 2026.

How did tariffs and product mix affect Hurco's margins in fiscal 2025 (HURC)?

Management attributed lower gross profit and margin to reduced high-performance machine volume and new tariffs implemented in H2 fiscal 2025.

Did Hurco see any geographic improvement in orders or sales late in fiscal 2025 (HURC)?

Yes; management noted U.S. and Germany finished the year with their strongest quarter of orders and sales for fiscal 2025.