IperionX Validates GenX™ Continuous Titanium Production
GenX continuous HAMR data indicate sharply lower energy and reagent use with higher throughput, supporting plans for industrial-scale titanium powder production.
Rhea-AI Summary
IperionX (IPX) reported successful validation of its GenX™ continuous HAMR™ titanium production platform after four production campaigns at its Virginia R&D facility.
The commercial-scale GenX system processed more than 500 kg of titanium powder over 41 hours, averaging about 12 kg per hour, with all valid samples meeting their relevant ASTM oxygen benchmarks (Grade 5 for angular and Grade 23 for spherical powders). Measured data showed more than 45% lower magnesium use, over 60% lower hydrogen use, and over 75% lower power consumption per kilogram versus batch HAMR™, while achieving six times throughput on a like-for-like run time basis. In Q4 2026, IperionX plans to further optimize the GenX furnace, integrate it into a full powder production line, and advance technoeconomic and engineering studies for a first industrial-scale GenX production line, supported by U.S. Army Task Order 2 under its US$99 million SBIR Phase III contract.
Positive
- 500 kg titanium powder processed over 41 hours at ~12 kg/h
- GenX magnesium use per kg titanium is >45% lower than batch HAMR™
- Hydrogen consumption per kg titanium is >60% lower than batch HAMR™
- Power consumption per kg titanium is >75% lower than batch HAMR™
- Throughput is 6x batch HAMR™ on a like-for-like run time basis
- All valid spherical powder samples met stringent ASTM Grade 23 oxygen limits
- U.S. Army Task Order 2 funds continuous HSPT™ and dehydrogenation capacity under a US$99m SBIR Phase III contract
Negative
- None.
News Explained
GenX has completed validation on the commercial-scale furnace, but industrial-scale deployment remains an engineering and economic evaluation for
Key Figures
- Powder processed
- >500 kg
- Four continuous runs totaling 41 hours
- Throughput
- 6 times
- Compared with batch HAMR on a like-for-like run-time basis
- Power consumption
- >75% lower
- Per kilogram versus batch HAMR processing
- Magnesium consumption
- >45% lower
- Per kilogram versus batch HAMR processing
- Hydrogen consumption
- >60% lower
- Per kilogram versus batch HAMR processing
- Spherical powder oxygen
- 0.078%
- Average product oxygen versus 0.130% Grade 23 specification
- Angular samples meeting Grade 5
- 7 of 8 samples
- Angular powder oxygen validation
Historical Context
-
Reported 24/7 HAMR powder operations and targeted approximately 200 tpa ramp-up capacity.
24h Move is the share-price change in the day after each event; other market factors may also have contributed.
Key Terms
astm grade 5 technical
dehydrogenation technical
technoeconomic technical
AI-generated analysis. How Rhea-AI works. Not financial advice.
- Advancing titanium beyond batch production: GenX™ has validated continuous HAMR™ processing, advancing beyond the batch model used in conventional Kroll titanium production. Major operating gains support the potential for lower unit costs, higher titanium throughput, and a modular capital-efficient expansion pathway
- Verified oxygen results: All valid product samples met the relevant oxygen benchmark: ASTM Grade 5 for angular powder and the more stringent Grade 23 specification for spherical titanium powder
- Six times throughput volume: Total throughput for the GenX™ furnace was six times the volume of the batch HAMR™ system, on a like-for-like run time basis
- Lower energy intensity: Power consumption reduced by more than
75% versus batch HAMR™ processing - Substantially lower measured input use: More than
45% less magnesium and over60% less hydrogen required per kilogram of titanium powder, relative to batch HAMR™ - Further efficiency potential: Operational data highlights potential for far lower capex intensity (installed capital per ton of capacity) and the potential for significantly lower labor unit costs
- Next stage in Q4 2026: IperionX will continue to optimize the current GenX™ furnace; integrate the continuous furnace into a full titanium powder production line; and advance technoeconomic and engineering work for the first industrial-scale GenX™ production line
SOUTH BOSTON, Va., Sept. 16, 2026 (GLOBE NEWSWIRE) -- IperionX Limited (IperionX) (NASDAQ: IPX, ASX: IPX) is pleased to announce that GenX™, its next-generation continuous HAMR™ titanium production platform, has been successfully validated through the first four production campaigns, completed on the commercial-scale GenX™ system at IperionX’s Virginia R&D facility.
GenX™ validation opens a pathway to a step change in titanium production economics. Moving beyond the batch model used in conventional Kroll titanium production, continuous processing offers the potential for higher throughput, significantly lower unit costs, improved equipment utilization and reduced processing time.
Successful testing demonstrates low-oxygen titanium powder production
The GenX™ system processed more than 500 kg of titanium powder across four separate continuous runs totaling 41 hours, at an average rate of approximately 12 kg per hour. Product from each run was collected separately, with samples randomly selected from different locations for oxygen analysis.
| Measure | Angular powder | Spherical powder | ||
| Starting oxygen | ||||
| Product oxygen range | ||||
| Average product oxygen | ||||
| Relevant oxygen specification | Grade 5: | |||
| Runs and combined duration | 2 runs / 18 hours | 2 runs / 23 hours | ||
| Analyzed samples | 7 | 8 | ||
Table 1: GenX™ continuous titanium production results
Seven of the eight angular powder samples collected met the Grade 5 oxygen limit applicable to Ti-6Al-4V plate and bar under ASTM B265 and B348. Four of the eight also met the more stringent Grade 23 oxygen limit. One sample collected during an interrupted furnace run did not complete the HAMR™ cycle and was excluded from the validation assessment. IperionX anticipates that minor process refinements will enable angular powder to meet the Grade 23 oxygen limit. All spherical titanium powder samples met the Grade 23 oxygen limit and therefore also satisfied the Grade 5 oxygen specifications.
GenX™ continuous processing – potential to materially shift the titanium cost curve
The patented HAMR™ process is IperionX’s hydrogen-enabled, low-temperature process for low-oxygen titanium powder, currently in operation on a batch basis in Virginia. GenX™ applies that process continuously, eliminating the repeated furnace heat-up, cool-down, loading and unloading time inherent in batch cycles. Measured GenX™ data has firmly established the potential to materially reduce the cost base for HAMR™ titanium production.
| Operating measure | Measured GenX result | Comparison basis (batch HAMR)1 |
| Magnesium consumption | > | Per kg |
| Hydrogen consumption | > | Per kg |
| Power consumption | > | Per kg |
| Processing time | 6 times throughput | Like-for-like run time |
1. Actual operating data based upon current batch HAMR operations
Table 2: GenX™ measured inputs and throughput compared to batch HAMR™
All comparisons are measured results against the batch HAMR™ reference; power use was measured directly on the GenX™ system. Magnesium is HAMR’s largest reagent cost, and lower use also reduces the by-product requiring downstream leaching and handling, which will be evaluated and quantified in further production campaigns.
Continuous GenX™ operation is expected to improve equipment utilization, eliminate ancillary process steps and support expansion through replicated and scaled-up production lines. Operational data highlights the potential for far lower installed capital per ton of annual capacity, and IperionX estimates significant potential labor cost savings.
Engineering the next stage
During Q4 2026, IperionX will continue to run and optimize the GenX™ furnace, integrate the current furnace into a full powder production line; and conduct technoeconomic and engineering evaluation for the first industrial-scale GenX™ production line. GenX™ remains a high capacity, low cost development platform but is not required to achieve low cost production for the existing 200 tpa production ramp or planned expansions in Virginia. Similar industrial scale furnace types in service are achieving throughputs measured in 1000s of tons per annum per unit.
GenX™ also complements continuous HSPT™ development, supporting a pathway from continuous titanium powder production to finished titanium components. U.S. Army Task Order 2, awarded on August 31, 2026 under IperionX's US
IperionX CEO Taso Arima said:
“Achieving continuous primary titanium production has long been the ultimate aspiration for the titanium industry. IperionX’s GenX™ process is a continuous titanium production platform that is more efficient to operate and easier to scale. These first results exceeded our expectations: more than 500 kilograms of recycled titanium powder processed across four separate runs, with every sample meeting its relevant oxygen specification.
Substantially lower magnesium, hydrogen and power consumption at steady state, together with processing throughput increasing by six times, give us a strong basis for industrial development. Our next step is the engineering and economic evaluation of the first industrial-scale GenX™ production line. We aim to establish a scalable platform for expansion that lowers production costs and brings titanium within reach of a broader range of applications.”
About IperionX
IperionX is a leading American titanium metal and critical materials company – using patented metal technologies to produce high performance titanium alloys, from titanium minerals or scrap titanium, at lower energy, cost and carbon emissions.
Our Titan critical minerals project is the largest JORC-compliant mineral resource of titanium, rare earth and zircon mineral sands in the United States.
IperionX’s titanium metal and critical minerals are essential for advanced U.S. industries including space, aerospace, defense, consumer electronics, hydrogen, automotive and additive manufacturing.
Forward Looking Statements
Information included in this release constitutes forward-looking statements. Often, but not always, forward looking statements can generally be identified by the use of forward-looking words such as “may”, “will”, “expect”, “intend”, “plan”, “estimate”, “anticipate”, “continue”, and “guidance”, or other similar words and may include, without limitation, statements regarding plans, strategies and objectives of management, anticipated production or construction commencement dates and expected costs or production outputs.
Forward looking statements inherently involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance, and achievements to differ materially from any future results, performance, or achievements. Relevant factors may include, but are not limited to, changes in commodity prices, foreign exchange fluctuations and general economic conditions, increased costs and demand for production inputs, the speculative nature of exploration and project development, including the risks of obtaining necessary licenses and permits and diminishing quantities or grades of reserves, the Company’s ability to comply with the relevant contractual terms to access the technologies, commercially scale its closed-loop titanium production processes, or protect its intellectual property rights, political and social risks, changes to the regulatory framework within which the Company operates or may in the future operate, environmental conditions including extreme weather conditions, recruitment and retention of personnel, industrial relations issues and litigation.
Forward looking statements are based on the Company and its management’s good faith assumptions relating to the financial, market, regulatory and other relevant environments that will exist and affect the Company’s business and operations in the future. The Company does not give any assurance that the assumptions on which forward looking statements are based will prove to be correct, or that the Company’s business or operations will not be affected in any material manner by these or other factors not foreseen or foreseeable by the Company or management or beyond the Company’s control.
Although the Company attempts and has attempted to identify factors that would cause actual actions, events or results to differ materially from those disclosed in forward looking statements, there may be other factors that could cause actual results, performance, achievements, or events not to be as anticipated, estimated or intended, and many events are beyond the reasonable control of the Company. Accordingly, readers are cautioned not to place undue reliance on forward looking statements. Forward looking statements in these materials speak only at the date of issue. Subject to any continuing obligations under applicable law or any relevant stock exchange listing rules, in providing this information the Company does not undertake any obligation to publicly update or revise any of the forward-looking statements or to advise of any change in events, conditions or circumstances on which any such statement is based.
Contacts
Anastasios (Taso) Arima, Founder and CEO
Toby Symonds, President
Dominic Allen, Chief Commercial Officer
Investors: investorrelations@iperionx.com
Media: media@iperionx.com
+1 980 237 8900
www.iperionx.com
FAQ
AI-generated questions and answers. How Rhea-AI works. Not financial advice.
What were the detailed oxygen results for GenX angular and spherical titanium powders?
Angular powder runs started from 0.250%–0.323% oxygen and produced a range of 0.104%–0.144%, with an average of 0.126%. Seven of eight angular samples met the ASTM Grade 5 oxygen limit, and four of eight also met the tighter Grade 23 limit; one sample from an interrupted run that did not complete the HAMR™ cycle was excluded from validation. Spherical powder started at 0.215% oxygen and produced 0.072%–0.084% with an average of 0.078%, and all spherical samples met the Grade 23 oxygen limit.
How many GenX runs were conducted and how were the samples analyzed?
The GenX system completed four continuous runs totaling 41 hours, split into two runs over 18 hours for angular powder and two runs over 23 hours for spherical powder. Product from each run was collected separately, and 7 angular and 8 spherical samples were randomly selected from different locations for oxygen analysis.
What development work is planned for GenX in Q4 2026?
In Q4 2026, IperionX plans to continue running and optimizing the existing GenX furnace, integrate this continuous furnace into a full titanium powder production line, and carry out technoeconomic and engineering evaluations for the first industrial-scale GenX production line. The company also indicates that GenX complements continuous HSPT™ development, providing a pathway from continuous powder production to finished titanium components.
Is GenX required for IperionX’s near-term titanium production plans in Virginia?
GenX is described as a high-capacity, low-cost development platform, but it is not required to achieve low-cost production for the existing 200 tpa production ramp or for planned expansions in Virginia. It is intended to support a scalable, potentially lower-cost platform for future industrial-scale capacity.