Integral Metals Provides Update on 2025 Drilling Program at the KAP Project, Northwest Territories
Integral Metals (OTC:ITGLF) has completed its 2025 diamond drilling program at the KAP Project in Northwest Territories, consisting of six drillholes totaling 843 metres. The program focused on two key areas: the Main Showing area and the F96-05 zone.
At the Main Showing target, three holes were drilled, with KAP25-001 intersecting 3.55 metres of strong sphalerite mineralization. The F96-05 target area saw three deeper holes, with KAP25-006 yielding the most promising results, showing semi-massive sphalerite replacement zones over 50 metres of core. Samples from all drillholes have been sent for geochemical analysis, with results pending.
Integral Metals (OTC:ITGLF) ha completato il programma di perforazioni diamantine 2025 presso il Progetto KAP nelle Territorie del Nord-Ovest, composto da sei pozzi per un totale di 843 metri. Il programma si è concentrato su due aree chiave: l’area del Main Showing e la zona F96-05.
Nel bersaglio Main Showing sono stati perforati tre pozzi, con KAP25-001 ghiacciato 3,55 metri di mineralizzazione robusta di sfalerite. Nell’area bersaglio F96-05 sono stati eseguiti tre pozzi più profondi, KAP25-006 che ha fornito i risultati più promettenti, mostrando zone di sostituzione di sfalerite semimassive su 50 metri di core. Campioni di tutti i pozzi sono stati inviati per analisi geochimiche, i cui esiti sono in attesa.
Integral Metals (OTC:ITGLF) ha completado su programa de perforación diamante de 2025 en el Proyecto KAP en el noroeste de Territorios, que consistió en seis pozos por un total de 843 metros. El programa se centró en dos áreas clave: la zona Main Showing y la zona F96-05.
En el objetivo Main Showing se perforaron tres agujeros, con KAP25-001 que intersectó 3,55 metros de mineralización fuerte de esfalerita. En la zona objetivo F96-05 se realizaron tres sondeos más profundos, KAP25-006 proporcionando los resultados más prometedores, mostrando zonas de sustitución de esfalerita semimassivas sobre 50 metros de núcleo. Las muestras de todos los taladros han sido enviadas para análisis gequímico, cuyos resultados están pendientes.
Integral Metals (OTC:ITGLF)는 북서부 준주(Northwest Territories)의 KAP 프로젝트에서 2025년 다이아몬드 드릴링 프로그램을 완료했으며 총 843미터의 여섯 개의 시추공으로 구성됩니다. 프로그램은 두 가지 핵심 영역에 집중했습니다: 메인 쇼잉(Main Showing) 지역과 F96-05 구역.
메인 쇼잉 타깃에서 세 곳의 시추가 수행되었고, KAP25-001이 3.55미터의 강한 방해석 광물화 교차를 보였습니다. F96-05 타깃 영역에서는 더 깊은 세 개의 시추가 있었으며 KAP25-006이 가장 유망한 결과를 보여 50미터의 코어에 걸쳐 준대량 방해석 치환대가 형성되었습니다. 모든 시추의 시료는 지화학 분석을 위해 발송되었고 결과는 아직 대기 중입니다.
Integral Metals (OTC:ITGLF) a terminé son programme de forages diamants 2025 sur le projet KAP dans les Territoires du Nord-Ouest, comprenant six forages pour un total de 843 mètres. Le programme s’est concentré sur deux zones clés : la zone Main Showing et la zone F96-05.
Sur la cible Main Showing, trois forages ont été réalisés, KAP25-001 ayant croisé 3,55 mètres de minéralisation forte de sphalérite. Dans la zone cible F96-05, trois forages plus profonds ont été effectués, KAP25-006 donnant les résultats les plus prometteurs, montrant des zones de remplacement de sphalérite semi-massives sur 50 mètres de carotte. Les échantillons de tous les forages ont été envoyés pour analyse géochimique, les résultats étant en attente.
Integral Metals (OTC:ITGLF) hat sein Diamond-Drilling-Programm 2025 beim KAP-Projekt in den Nordwest-Territories abgeschlossen, bestehend aus sechs Bohrlöchern mit insgesamt 843 Metern. Das Programm konzentrierte sich auf zwei Schlüsselbereiche: den Main Showing-Bereich und die F96-05-Zone.
Am Main Showing-Ziel wurden drei Bohrungen durchgeführt, wobei KAP25-001 3,55 Meter starke Sphaleritmineralisierung durchteufte. Im Zielgebiet F96-05 gab es drei tiefere Bohrungen, KAP25-006 die vielversprechendsten Ergebnisse lieferte, und Zonen semimassiver Sphalerit-Substitutionszonen über 50 Metern Kernlänge zeigten. Proben aus allen Bohrungen wurden zur geochemischen Analyse versendet, Ergebnisse stehen noch aus.
Integral Metals (OTC:ITGLF) أكملت برنامج الحفر الماسي لعام 2025 في مشروع KAP بمناطق الأراضي الشمالية الغربية، ويتكون من ستة آبار بمرتكز إجمالي 843 مترًا. ركز البرنامج على منطقتين رئيسيتين: منطقة Main Showing ومنطقة F96-05.
في هدف Main Showing، تم حفر ثلاث آبار، حيث KAP25-001 اكتشف 3.55 متر من التعدين القوي للسفاليرا. في منطقة الهدف F96-05، شهدت ثلاث آبار أعمق، KAP25-006 مقدماً النتائج الأكثر وعداً، مع ظهور مناطق استبدال للسفاليرا شبه الضخمة عبر 50 مترًا من العينة. أُرسلت عينات جميع الآبار للتحليل الجيوكيميائي، والنتائج ما تزال بانتظار.
Integral Metals（OTC:ITGLF） 已完成在西北地区的 KAP 项目 2025 年钻石钻探计划，总计六口钻井，合计 843 米，重点关注两大区域：主显现区（Main Showing）和 F96-05 区。
在主显现目标处，进行了三口钻井，KAP25-001 拟合出 3.55 米强烈的闪锌矿化。在 F96-05 目标区，进行了三口更深的钻井，KAP25-006 显示出最有希望的结果，核心样品中出现了 50 米长的半致密闪锌矿置换带。所有钻井的样品均已送去进行地球化学分析，结果尚待公布。
- Successful reproduction of historical mineralization in KAP25-001 hole
- KAP25-006 showed promising semi-massive sphalerite zones over 50 metres
- Extended known mineralization footprint northward
- Confirmed presence of strongly mineralized horizons at shallow depths
- Drilling showed variability in grade and morphology across holes
- Full assay results still pending and unavailable
Drilling Campaign Highlights Promising High-Grade Intercepts and Lateral Potential
CALGARY, Alberta, Sept. 17, 2025 (GLOBE NEWSWIRE) -- Integral Metals Corp. (CSE: INTG | OTC: ITGLF | FSE: ZK9) (the “Company” or “Integral”) is pleased to provide an update on its 2025 diamond drilling program at the KAP Project, located in the Northwest Territories. The program successfully tested both the Main Showing area and the F96-05 zone, advancing the Company’s understanding of the project’s mineralized system.
The program comprised six drillholes totaling 843 metres. Three holes were completed at the Main Showing target area, where drilling targeted historical intercepts and confirmed the presence of strongly mineralized horizons at shallow depths. KAP25-001 intersected 3.55 metres of strong sphalerite mineralization within the Manetoe Facies, successfully reproducing the mineralization reported in historical drillhole 76-02. Nearby holes, KAP25-002 and KAP25-003, demonstrated variability in grade and morphology, with broader zones of moderate mineralization and narrower intervals of high-grade sphalerite, respectively. Collectively, these holes provide valuable insights into the lateral continuity and structural controls in the area.
At the F96-05 target area, three deeper holes were drilled to test the extent of a major collapse breccia unit previously identified as highly prospective for mineralization. KAP25-004 confirmed the geometry of the collapse breccia and validated earlier results, while KAP25-005 extended mineralization northward, showing continuity along the interpreted trend. KAP25-006 represented the largest step-out of the program, intercepting broad and locally semi-massive sphalerite replacement zones over more than 50 metres of core, marking one of the most promising results of the campaign.
The 2025 drilling program has successfully tested key historical results, including mineralized zones of significance, and expanded the known footprint of mineralization to the north of the Main Showing. Samples from all drillholes have been dispatched for geochemical analysis, and results will be released once available. Integral Metals is encouraged by the preliminary observations and believes the new data will play an important role in refining exploration models and guiding future drill targeting at the KAP Project.
“This year’s drilling program shows that the mineralized system at the Main Showing likely extends further than previously thought,” said Paul Sparkes, CEO of Integral Metals. “The results from the step-out hole are encouraging and highlight the growth potential of the KAP Project. We look forward to receiving the assay results and using this new information to guide the next phase of drilling.”
Qualified Person
The scientific and technical content of this news release has been reviewed, verified, and approved by Jared Suchan, Ph.D., P.Geo., VP of Exploration at the Company, and a “Qualified Person” as defined by National Instrument 43-101.
For a discussion of the Company’s QA/QC and data verification procedures and processes, please see the technical report entitled, Technical Report on the KAP Property, Mackenzie Mountains, Northwest Territories, Canada, a copy of which may be obtained under the Company’s profile at www.sedarplus.ca.
On Behalf of the Board Directors
Paul Sparkes
Chief Executive Officer
825-414-3163
info@integralmetals.com
ABOUT INTEGRAL METALS CORP.
Integral is an exploration stage company, engaged in the business of mineral exploration for critical minerals, including gallium, germanium, and rare earth elements, with the goal of contributing to the development of a domestic supply chain for these minerals. Integral holds properties in mining-friendly jurisdictions in Canada and the United States of America, including the Northwest Territories, Manitoba and Montana, where it has received regulatory support for its exploration efforts.
Forward-Looking Information
Certain statements contained in this press release constitute forward-looking information. These statements relate to future events or future performance. The use of any of the words “could”, “intend”, “expect”, “believe”, “will”, “projected”, “estimated” and similar expressions and statements relating to matters that are not historical facts are intended to identify forward-looking information and are based on the Company’s current beliefs or assumptions as to the outcome and timing of such future events. In particular, this press release contains forward-looking information relating to, among other things, the Company’s future plans and prospects, including with respect to further exploration work at its mineral properties.
Various assumptions or factors are typically applied in drawing conclusions or making the forecasts or projections set out in forward-looking information, including, in respect of the forward-looking information included in this press release, assumptions regarding the future plans and strategies of the Company, including its ability to complete the planned drilling program as intended.
Although forward-looking information is based on the reasonable assumptions of the Company’s management, there can be no assurance that any forward-looking information will prove to be accurate. Forward-looking information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such factors include, among other things, the risk that the Company may be unable to complete further exploration work as planned, and that the Company’s business prospects and priorities may change, whether as a result of unexpected events, general market and economic conditions or as a result of the Company’s future exploration efforts, and that any such change may result in a re-deployment of the Company’s resources and efforts in a manner divergent from the Company’s current business plan or strategy. The forward-looking information contained in this release is made as of the date hereof, and the Company is not obligated to update or revise any forward-looking information, whether as a result of new information, future events or otherwise, except as required by applicable securities laws. Because of the risks, uncertainties and assumptions contained herein, investors should not place undue reliance on forward-looking information. The foregoing statements expressly qualify any forward-looking information contained herein.
The Canadian Securities Exchange has not reviewed, approved or disapproved the contents of this press release.
FAQ
What were the key findings from Integral Metals' (ITGLF) 2025 drilling program at KAP Project?
How many drill holes did Integral Metals complete at the KAP Project in 2025?
What was the most significant result from ITGLF's 2025 KAP Project drilling?
When will Integral Metals release the assay results from the 2025 KAP drilling program?
What areas did Integral Metals target in their 2025 KAP Project drilling program?
