Pecoy Copper Intersects 727 Metres at 0.30% Copper and 0.11 g/t Gold at South Breccia; Northwest Returns 220 Metres at 0.40% Copper and 0.030% Molybdenum
Sentiment and the balance of points
Rhea-AI Sentiment reads the wording of the document, how positive or negative its language is on a 1 to 5 scale. The balance of points shown with the takes weighs what the document actually discloses, so the two can disagree, for example when a trial that missed its main goal is described in upbeat language.
Rhea-AI Summary
Pecoy Copper (PCUUF) reported drilling results from its Pecoy Project in southern Peru, including 727.25 metres grading 0.30% copper at South Breccia. That PEC26-082 interval also averaged 0.11 grams per tonne gold and included 470.0 metres at 0.32% copper and 0.15 grams per tonne gold.
Northwest hole PEC26-081 returned 220.0 metres at 0.40% copper and 0.030% molybdenum, plus a separate deeper mineralized interval beneath the resource pit shell. East Breccia hole PEC26-076 returned 236.0 metres at 0.40% copper, including 92.0 metres at 0.50% copper. Results covered ten holes totalling 8,842.25 metres. Pecoy continues to target approximately 35,000 metres of drilling in 2026, with over 26,000 metres drilled in the campaign as of November 13. The economic contribution of gold and molybdenum remains subject to metallurgical testing and further evaluation.
Positive
- Minor pointPEC26-082 intersected 727.25 metres at 0.30% copper and 0.11 grams per tonne gold at South Breccia.
- Minor pointPEC26-081 intersected 220.0 metres at 0.40% copper and 0.030% molybdenum within 564.0 metres at 0.30% copper.
- Minor pointPEC26-076 intersected 236.0 metres at 0.40% copper at East Breccia, including 92.0 metres at 0.50% copper.
- Minor pointPEC26-078 returned 143.45 metres at 0.40% copper and 0.07 grams per tonne gold at South Breccia.
- Minor pointPEC26-081 returned a separate 317.5 metres at 0.22% copper and 0.010% molybdenum beneath the resource pit shell.
11 minor points
- Minor pointCentral Breccia drilling returned 196.9 metres at 0.20% copper, supporting an interpreted 315-metre extension down the deposit’s slope.
- Minor pointPEC26-074 intersected 248.0 metres at 0.25% copper in its upper section.
- Minor pointPEC26-074 also returned 182.3 metres at 0.21% copper beneath the resource pit shell.
- Minor pointWest Pampa hole PEC26-077 returned 213.0 metres at 0.25% copper, including 120.0 metres at 0.30% copper.
- Minor pointEastern step-out hole PEC26-075 returned 126.0 metres at 0.25% copper in its upper section.
- Minor pointPEC26-075 also returned 274.0 metres at 0.15% copper, mostly beneath the resource pit shell.
- Minor pointNorth-Central hole PEC26-073 returned 340.00 metres at 0.25% copper.
- Minor pointCentre-of-pit hole PEC26-079 returned 604.20 metres at 0.20% copper.
- Minor pointPEC26-080 averaged 0.21% copper over 350.45 metres, including 68.35 metres at 0.30% copper.
- Minor point. Forward-looking: it has not happened yet and may not happen.Pecoy continues to target approximately 35,000 metres of drilling in 2026.
- Minor point. Forward-looking: it has not happened yet and may not happen.Central Breccia follow-up drilling will test eastward and down the deposit’s slope.
Negative
- Minor pointGold and molybdenum’s potential economic contribution remains subject to metallurgical testwork and further evaluation.
- Minor pointPEC26-080 was lost and restarted as PEC26-080A, whose assays remain pending.
AI-generated analysis. How Rhea-AI works. Not financial advice.
South Breccia includes 470 metres at
VANCOUVER, British Columbia, Nov. 16, 2026 (GLOBE NEWSWIRE) -- Pecoy Copper Corp. (“Pecoy Copper” or the “Company”) (TSXV: PCU; FSE: D5E; OTCQX: PCUUF) is pleased to report results from ten diamond drill holes, PEC26-073 through PEC26-082, totalling 8,842.25 metres at its Pecoy Project (the “Project”) in southern Peru. Four holes returned intervals of more than 140 metres averaging at least
Highlights:
- South Breccia – another strong copper-gold intersection. PEC26-082 returned 727.25 metres at
0.30% Cu and 0.11 g/t Au, including 188.0 metres at0.40% Cu and 0.12 g/t Au. The 727.25-metre intersection includes 470.0 metres at 0.15 g/t Au and0.32% Cu. PEC26-078 returned 143.45 metres at0.40% Cu and 0.07 g/t Au in the western part of the South Breccia. - Northwest – broad copper-molybdenum mineralization and a priority growth opportunity. PEC26-081 returned 220.0 metres at
0.40% Cu and0.030% Mo from 104 metres, including 54.6 metres at0.51% Cu. The 220.0 metre interval lies within a 564.0-metre interval averaging0.30% Cu and0.020% Mo from 2.0 metres. The hole tested the margin of the interpreted MTP-01 target, providing geological information to guide further testing. - East Breccia – first hole of the 2026 program to test the East Breccia returns broad, higher-grade copper mineralization. PEC26-076 returned 236.0 metres at
0.40% Cu, including 92.0 metres at0.50% Cu, within a broader interval of 513.9 metres at0.30% Cu in the East Breccia area.
Vincent Metcalfe, President and CEO of Pecoy Copper, commented: “Hole 082 reinforces the importance of South Breccia at Pecoy, returning more than 700 metres of copper-gold mineralization, including 470 metres at
Exploration results by sector
South Breccia copper and gold – PEC26-078 and PEC26-082
PEC26-082 provides another substantial copper-gold intersection in South Breccia, the Company’s principal mineralized body. Drilled east to west from an eastern collar, the hole was designed to cross South Breccia to improve understanding of its structural controls and the association between copper and gold mineralization. PEC26-078 was collared approximately 136 metres west of PEC26-072 and drilled steeply northward. The principal copper-gold intervals lie within the resource pit shell used to constrain the April 30, 2025 Mineral Resource Estimate.
PEC26-082 returned 727.25 metres at
Within the 727.25-metre intersection, PEC26-082 returned 470.0 metres at
PEC26-078 returned 143.45 metres at
Northwest copper-molybdenum mineralization and growth opportunity – PEC26-081
PEC26-081 returned 220.0 metres at
PEC26-081 also returned a separate deeper interval of 317.5 metres at
Gold and Molybdenum Context
The gold and molybdenum associated with these broad copper intersections provide additional by-product potential at Pecoy. Ongoing Phase 2 metallurgical testwork is evaluating improved gold recovery and the potential to produce a separate molybdenum concentrate, building on the Phase 1 review announced on May 26, 2026. The potential economic contribution of gold and molybdenum remains subject to metallurgical testwork and further evaluation.
East Breccia higher-grade copper mineralization – PEC26-076
PEC26-076 was the first hole drilled by the Company during the 2026 program to test the previously identified East Breccia, intersecting it in the upper portion of the hole before testing the Central Breccia target at depth. The East Breccia area returned 236.0 metres at
Logging records magmatic-hydrothermal and crackle breccias, intervening intrusive material and short dykes, with associated chalcopyrite. The overlapping, geologically defined East Breccia package returned 216.4 metres at
Central Breccia sparsely drilled target and interpreted extension – PEC26-076
Central Breccia remains a sparsely drilled target with very limited historical drilling, including the intersection in PEC-032. At depth, PEC26-076 returned 196.9 metres grading
Centre of the Pit and mineralization beneath the resource pit shell
PEC26-074 returned an upper interval of 248.0 metres at
West Pampa Zone – PEC26-077
PEC26-077 was a first-pass test of underdrilled ground at West Pampa, and returned 213.0 metres at
Eastern step out and other sectors – PEC26-075, PEC26-073, PEC26-079 and PEC26-080
PEC26-075, collared east of the deposit outline, returned 126.0 metres at
PEC26-073 was drilled from the North Breccia area to target Early Dark Micaceous (“EDM”) zones at depth. PEC26-079 tested the EDM Vein Zone in the underdrilled centre-of-pit saddle area, while PEC26-080 also tested the saddle. Much of this area was previously unestimated because of insufficient drilling, despite lying within the resource pit shell. These holes provide additional geological and assay information for future modeling. Assays over the full 350.45-metre length of PEC26-080, from surface to the end of the hole, averaged
Table 1: Selected Drill Intersections
| Hole | From (m) | To (m) | Length (m) | Cu (%) | Au (g/t) | Mo (%) | Ag (g/t) | Area (type) |
| PEC26-073 | 424.00 | 764.00 | 340.00 | 0.25 | 0.02 | 0.013 | 0.74 | North-Central (EDM depth target) |
| incl. | 488.00 | 578.00 | 90.00 | 0.30 | 0.02 | 0.015 | 1.05 | |
| PEC26-074 | 45.00 | 293.00 | 248.00 | 0.25 | 0.02 | 0.003 | 0.96 | Centre of the Pit (in-pit and depth expansion) |
| incl. | 50.00 | 194.00 | 144.00 | 0.30 | 0.02 | 0.003 | 1.06 | |
| incl. | 120.00 | 156.50 | 36.50 | 0.40 | 0.02 | 0.002 | 1.68 | |
| and | 450.00 | 940.00 | 490.00 | 0.20 | 0.02 | 0.004 | 1.11 | |
| and overlap. | 773.00 | 955.30 | 182.30 | 0.21 | 0.02 | 0.003 | 0.88 | (below pit) |
| PEC26-075 | 18.00 | 144.00 | 126.00 | 0.25 | 0.02 | 0.008 | 0.47 | East (step-out and depth) |
| incl. | 86.00 | 135.50 | 49.50 | 0.30 | 0.02 | 0.008 | 0.54 | |
| incl. | 114.00 | 129.70 | 15.70 | 0.40 | 0.02 | 0.008 | 0.62 | |
| and | 600.00 | 874.00 | 274.00 | 0.15 | 0.02 | 0.004 | 0.59 | |
| PEC26-076 | 124.10 | 638.00 | 513.90 | 0.30 | 0.02 | 0.010 | 1.15 | East and Central Breccia (in-pit and down-dip extension) |
| incl. | 157.90 | 374.30 | 216.40 | 0.41 | 0.03 | 0.010 | 1.19 | |
| overlap. | 174.00 | 410.00 | 236.00 | 0.40 | 0.03 | 0.010 | 1.16 | |
| incl. | 278.00 | 370.00 | 92.00 | 0.50 | 0.04 | 0.013 | 1.39 | |
| also incl. | 440.55 | 466.00 | 25.45 | 0.41 | 0.03 | 0.007 | 1.65 | |
| and | 679.00 | 875.90 | 196.90 | 0.20 | 0.06 | 0.006 | 0.94 | |
| incl. | 854.00 | 874.00 | 20.00 | 0.40 | 0.04 | 0.004 | 2.00 | |
| PEC26-077 | 56.00 | 269.00 | 213.00 | 0.25 | 0.02 | 0.005 | 1.00 | West Pampa (first-pass test) |
| incl. | 80.00 | 200.00 | 120.00 | 0.30 | 0.02 | 0.006 | 1.13 | |
| PEC26-078 | 231.50 | 444.00 | 212.50 | 0.30 | 0.05 | 0.007 | 1.23 | South Breccia (in-pit, western test) |
| incl. | 266.50 | 438.00 | 171.50 | 0.35 | 0.06 | 0.007 | 1.37 | |
| incl. | 276.50 | 419.95 | 143.45 | 0.40 | 0.07 | 0.008 | 1.50 | |
| incl. | 372.00 | 408.00 | 36.00 | 0.50 | 0.08 | 0.011 | 1.86 | |
| PEC26-079 | 23.80 | 628.00 | 604.20 | 0.20 | 0.02 | 0.004 | 1.03 | Centre of the Pit EDM Vein Zone (saddle test) |
| incl. | 38.00 | 84.00 | 46.00 | 0.30 | 0.01 | 0.003 | 0.60 | |
| incl. | 42.00 | 50.00 | 8.00 | 0.41 | 0.02 | 0.003 | 0.78 | |
| PEC26-080 | 0.00 | 350.45 | 350.45 | 0.21 | 0.02 | 0.006 | 1.12 | Centre of the Pit (underdrilled saddle) |
| incl. | 221.65 | 290.00 | 68.35 | 0.30 | 0.01 | 0.010 | 1.03 | |
| incl. | 259.95 | 276.00 | 16.05 | 0.40 | 0.01 | 0.007 | 1.14 | |
| PEC26-081 | 2.00 | 566.00 | 564.00 | 0.30 | 0.03 | 0.020 | 1.14 | Northwest (MTP-01 margin, extension) |
| incl. | 2.00 | 536.00 | 534.00 | 0.30 | 0.03 | 0.021 | 1.16 | |
| incl. | 8.00 | 376.00 | 368.00 | 0.35 | 0.03 | 0.025 | 1.34 | |
| incl. | 104.00 | 324.00 | 220.00 | 0.40 | 0.03 | 0.030 | 1.32 | |
| incl. | 120.00 | 174.60 | 54.60 | 0.51 | 0.04 | 0.024 | 1.52 | |
| and | 691.50 | 1,009.0 | 317.50 | 0.22 | 0.02 | 0.010 | 0.72 | (below pit) |
| PEC26-082 | 264.00 | 991.25 | 727.25 | 0.30 | 0.11 | 0.006 | 1.17 | South Breccia (in-pit structural and Cu–Au test) |
| incl. | 296.00 | 766.00 | 470.00 | 0.32 | 0.15 | 0.007 | 1.23 | |
| incl. | 474.00 | 652.00 | 178.00 | 0.30 | 0.20 | 0.005 | 1.11 | |
| overlap. | 552.00 | 894.00 | 342.00 | 0.35 | 0.09 | 0.006 | 1.29 | |
| incl. | 576.00 | 764.00 | 188.00 | 0.40 | 0.12 | 0.008 | 1.45 | |
| incl. | 695.10 | 764.00 | 68.90 | 0.50 | 0.06 | 0.012 | 1.67 | |
| also incl. | 802.00 | 844.00 | 42.00 | 0.40 | 0.06 | 0.005 | 1.48 | |
| also incl. | 946.00 | 984.00 | 38.00 | 0.41 | 0.04 | 0.011 | 1.63 |
Note: Reported intervals represent downhole lengths; true thicknesses have not yet been determined. Grades are length-weighted averages. Internal lower-grade intervals are included. Values may not sum exactly due to rounding. No individual-sample copper cut-off was applied. Overlapping and included intervals are not additive.
Table 2: Drillhole Information – Previously Reported Holes and Reported in this Release
| Hole | UTM East | UTM North | Elev (masl) | Azimuth | Dip | Length Drilled (m) | Area |
| PEC25-065 | 713977 | 8267284 | 1901 | N0 | -80 | 1186.25 | South Breccia |
| PEC25-066 | 713796 | 8267252 | 1831 | N0 | -75 | 1068.50 | South Breccia |
| PEC26-067 | 713104 | 8268120 | 1718 | N175 | -75 | 1040.00 | Northwest |
| PEC26-068 | 713630 | 8268000 | 2016 | N180 | -75 | 1,058.10 | Centre of the pit |
| PEC26-069 | 713710 | 8268037 | 2001 | N180 | -70 | 901.00 | Centre of the pit |
| PEC26-070 | 713611 | 8268327 | 1860 | N180 | -65 | 947.00 | North-Central |
| PEC26-071 | 713404 | 8267683 | 1927 | N180 | -80 | 776.20 | Centre of the pit |
| PEC26-072 | 713634 | 8267253 | 1795 | N0 | -82 | 956.00 | South Breccia |
| PEC26-073 | 713415 | 8268234 | 1856 | N180 | -81 | 938.00 | North-Central |
| PEC26-074 | 713325 | 8267618 | 1858 | N180 | -70 | 955.30 | Centre of the pit |
| PEC26-075 | 714040 | 8267712 | 2062 | N130 | -75 | 938.85 | East step-out |
| PEC26-076 | 713816 | 8268158 | 2040 | N180 | -72 | 1073 | East and Central |
| PEC26-077 | 713084 | 8267513 | 1706 | N180 | -72 | 599.25 | West Pampa |
| PEC26-078 | 713498 | 8267249 | 1766 | N0 | -85 | 923.00 | South Breccia |
| PEC26-079 | 713201 | 8267538 | 1739 | N175 | -70 | 850.00 | EDM Vein Zone |
| PEC26-080 | 713505 | 8267843 | 2025 | N180 | -75 | 350.45 | Centre of the pit |
| PEC26-081 | 713303 | 8267997 | 1867 | N0 | -60 | 1009.00 | Northwest |
| PEC26-082 | 714200 | 8267401 | 1948 | N270 | -60 | 1205.40 | South Breccia |
Note: Coordinate Reference System (CRS): WGS 84 / UTM Zone 18S (EPSG:32718)
Table 3: Other Drilling & Target Area – Assays pending or holes in progress
| Hole | UTM East | UTM North | Elev (masl) | Azimuth | Dip | Length Drilled (m) | Area |
| PEC26-080A | 713505 | 8267843 | 2025 | 180 | -75 | 1021 | Centre of the Pit |
| PEC26-083 | 714049 | 8267297 | 1921 | 270 | -62 | 1070 | South Breccia |
| PEC26-084 | 713197 | 8268262 | 1725 | 0 | -74 | 905 | Northwest |
| PEC26-085 | 712883 | 8268068 | 1630 | 90 | -45 | 974 | EDM Vein Zone |
| PEC26-086 | 713197 | 8268272 | 1725 | 315 | -60 | 696 | Northwest |
| PEC26-087 | 713894 | 8267282 | 1866 | 102 | -75 | 650 | SBX Gold Zone |
| PEC26-088 | 713235 | 8267684 | 1845 | 0 | -85 | 508 | Supergene Zone |
| PEC26-089 | 713214 | 8268040 | 1835 | 0 | -82 | In progress | Supergene Zone |
| PEC26-090 | 713533 | 8268092 | 1997 | 235 | -65 | In progress | EDM Centre |
| PEC26-091 | 714086 | 8267229 | 2001 | 79 | -78 | In progress | SBX Gold Zone |
| PEC26-092 | 713894 | 8267282 | 1866 | 249 | -78 | In progress | SBX Gold Zone |
Note: Coordinate Reference System (CRS): WGS 84 / UTM Zone 18S (EPSG:32718)
Exploration Productivity and 2026 Program
As of November 13, 2026, the Company had drilled over 26,000 metres in the current campaign, which began in December 2025, with 25 holes completed and 4 holes in progress. The Company continues to target approximately 35,000 metres of drilling at Pecoy in 2026. Assays are pending from 7 completed holes totalling 5,824 metres.
Follow-up priorities include defining South Breccia’s copper–gold mineralization and interpreted gold-enriched zone, testing the extent and continuity of Northwest copper–molybdenum mineralization and the MTP-01 target, and testing Central Breccia eastward and downdip. The results will inform ongoing geological modeling and future resource evaluation. Southern extensions remain a priority as access becomes available.
For more information about Pecoy Copper, please visit our website at www.pecoycopper.com or view the Company’s VRIFY presentation in connection with this release at https://vrify.com/decks/24958.
Figure 1: Plan view of the Pecoy Project showing the current deposit outline, principal mineralized zones, exploration target areas and current drill hole locations

Figure 2: Looking north - Cross-section showing broad copper-gold mineralization at South Breccia in PEC26-082

Figure 3: Looking west - Cross-section showing East Breccia copper mineralization and the interpreted Central Breccia downdip extension in PEC26-076

Figure 4: Looking west - Northwest cross-section showing copper–molybdenum mineralization in PEC26-081 and copper mineralization beneath the resource pit shell in PEC26-074.

Qualified Persons and Technical Notes
The scientific and technical information in this news release has been reviewed and approved by Vincent Cardin-Tremblay, P.Geo., Chief Geological Officer of Pecoy Copper and a Qualified Person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”).
The Qualified Person verified the data disclosed in this news release by reviewing the final laboratory assay workbooks and certificates, drillhole collar and downhole-survey data, sampling and analytical procedures, and QA/QC results. No limitations were imposed on the verification process.
Diamond drill core from the Pecoy Project was logged and sampled at the Company’s secure core facility at site by Company personnel. Drill core was sawn in half, with one half retained for reference and the other half sampled at nominal intervals of up to 2 metres, with sample boundaries adjusted to respect geological contacts. Core diameter varied between HQ and NQ depending on depth.
Samples were bagged, sealed, and transported by commercial carrier to the Bureau Veritas preparation laboratory in Arequipa, Peru, where samples were crushed and a 250 g split was pulverized to
Gold analyses were performed using fire assay fusion with ICP-OES finish on a 30 g sample (FA330). Samples returning gold values greater than 10 g/t Au were re-analyzed using fire assay with gravimetric finish (FA530). Copper and silver were analyzed by ICP-OES/MS following a four-acid digestion as part of a 45-element multi-element suite (4A200). Samples returning values over the upper detection limit (Au, Ag, Cu, Zn, Mo, Pb) were re-analyzed using four-acid digestion with AAS finish (MA402).
A comprehensive Quality Assurance and Quality Control (QA/QC) program was implemented as part of the sampling and analysis procedures. Certified reference materials, blanks, and duplicate samples (field, preparation, and analytical duplicates) were inserted into the sample stream at regular intervals, representing approximately
An NI 43-101 technical report in respect of the Pecoy Project with an effective date of April 30, 2025 and dated July 23, 2025 was prepared by Mining Plus and is available on SEDAR+ under the Company’s profile. Mineral resources are not mineral reserves and do not have demonstrated economic viability.
About Pecoy Copper
Pecoy Copper is advancing the Pecoy Copper-Gold-Molybdenum-Silver Project and the Tororume Project, which together cover approximately 19,800 hectares in southern Peru’s Arequipa region. Pecoy hosts a current inferred mineral resource of 865 million tonnes at
Less than 49,000 metres of drilling had been completed at Pecoy before the current campaign. The Project lies approximately 1,650 metres above sea level and benefits from year-round access and proximity to highways, power, water and the Pacific ports of Matarani and Ilo.
The Company's common shares trade on the TSX Venture Exchange under the symbol PCU, on the Frankfurt Stock Exchange under the symbol D5E, and on the OTCQX under the symbol PCUUF.
For further information, please contact:
Vincent Metcalfe, President & CEO
Pecoy Copper Corp.
Suite 2700, 666 Burrard Street, Vancouver, BC V6C 2X8
Tel: 1 (778) 401-9305 | Email: info@pecoycopper.com
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein.
Cautionary Note Regarding Forward-Looking Information
This news release contains forward-looking information and forward-looking statements within the meaning of applicable securities legislation. Forward-looking information includes, but is not limited to, statements regarding the planned 35,000-metre 2026 drill program at Pecoy; future drilling, modeling and interpretation at South Breccia, the Northwest, East Breccia, Central Breccia, West Pampa, Centre-of-Pit and North-Central target areas; the potential geometry, continuity, scale, extension and resource-growth implications of the mineralized system; interpretation and testing of the MTP-01 anomaly; ongoing Phase 2 metallurgical testwork and potential gold and molybdenum by-products; future access to southern extensions; and the Company's ability to identify targets that may support future resource evaluation. Forward-looking information is based on management's current expectations, estimates, assumptions and beliefs, including assumptions regarding funding, permits, access, personnel, drilling productivity, laboratory turnaround times and the availability of equipment and contractors. Forward-looking information is subject to known and unknown risks and uncertainties, many of which are beyond the Company's control, that may cause actual results to differ materially from those expressed or implied. These risks include exploration and geological risk, uncertainty in target interpretations, metallurgical variability and recovery risk, operational risk, permitting and community-relations risk, financing and market risk, and the other risk factors described in the Company's continuous-disclosure filings available on SEDAR+. Forward-looking information is provided as of the date of this news release. Except as required by applicable law, the Company undertakes no obligation to update or revise such information. Readers should not place undue reliance on forward-looking information.
Photos accompanying this announcement are available at:
https://www.globenewswire.com/NewsRoom/AttachmentNg/db836848-64f5-406e-8fd0-389617a09a37
https://www.globenewswire.com/NewsRoom/AttachmentNg/a2130e34-ef2f-4771-b708-4ff0e1989fc6
https://www.globenewswire.com/NewsRoom/AttachmentNg/2f9ed1fa-8fea-4fd6-8b62-2b5ee38a8c53
https://www.globenewswire.com/NewsRoom/AttachmentNg/4165af33-93b4-4527-a165-72299b9f9eac
FAQ
AI-generated questions and answers. How Rhea-AI works. Not financial advice.
What did Pecoy Copper’s South Breccia hole PEC26-082 intersect?
PEC26-082 returned 727.25 metres at 0.30% copper and 0.11 grams per tonne gold. Within that interval, 470.0 metres averaged 0.32% copper and 0.15 grams per tonne gold. Another included interval measured 188.0 metres at 0.40% copper and 0.12 grams per tonne gold.
What did Pecoy Copper’s Northwest hole PEC26-081 return?
PEC26-081 returned 220.0 metres at 0.40% copper and 0.030% molybdenum from 104.0 metres. A separate deeper interval returned 317.5 metres at 0.22% copper and 0.010% molybdenum beneath the resource pit shell. Pecoy interprets this deeper mineralization as remaining open at depth.
How many Pecoy Copper drill holes still have assays pending?
Assays are pending from 7 completed holes totalling 5,824 metres. As of November 13, 2026, the current campaign, which began in December 2025, had 25 completed holes and 4 holes in progress.
What is Pecoy Copper testing to evaluate gold and molybdenum recovery?
Ongoing Phase 2 metallurgical testwork is evaluating improved gold recovery and the potential to produce a separate molybdenum concentrate. This work builds on the Phase 1 review announced on May 26, 2026.