Prospector Initiates Drilling on Devon Cu-Ni Project, Ontario
Prospector Metals (OTCQB: PMCOF) has begun a maiden diamond drill program on the Devon Copper-Nickel Project in northwestern Ontario.
The fully financed program will total 1,000 m across five targets at the Copper Hill occurrence, is expected to take ~3 weeks, and tests targets generated from 3D VTEMTM modelling and prospecting that returned surface assays up to 1.13% Cu, 0.53% Ni and 3.54 g/t Pd+Pt. The 15,347-hectare, road-accessible property lies ~50 km SW of Thunder Bay.
Prospector Metals (OTCQB: PMCOF) ha avviato una prima campagna di trivellazioni diamantine sul Devon Copper-Nickel Project nel nord-ovest dell'Ontario.
Il programma completamente finanziato avrà un totale di 1.000 m su cinque bersagli presso l'occorrenza Copper Hill, e si prevede che duri circa 3 settimane, testando bersagli generati dalla modellazione VTEMTM 3D e da prospezione che hanno restituito analisi superficiali fino a 1,13% Cu, 0,53% Ni e 3,54 g/t Pd+Pt. La proprietà di 15.347 ettari, accessibile via strada, si trova a circa 50 km a sud-ovest di Thunder Bay.
Prospector Metals (OTCQB: PMCOF) ha iniciado un programa inaugural de perforación con diamante en el Devon Copper-Nickel Project, en el noroeste de Ontario.
El programa totalmente financiado tendrá un total de 1.000 m a lo largo de cinco objetivos en la ocurrencia Copper Hill, y se espera que dure ~3 semanas, probando objetivos generados a partir de la modelización 3D VTEMTM y prospección que arrojaron ensayos de superficie de hasta 1,13% Cu, 0,53% Ni y 3,54 g/t Pd+Pt. La propiedad de 15.347 hectáreas, de acceso por carretera, se encuentra a aproximadamente 50 km al suroeste de Thunder Bay.
Prospector Metals (OTCQB: PMCOF)가 온타리오주 북서부의 Devon Copper-Nickel Project에서 최초 다이아몬드 드릴 프로그램을 시작했습니다.
전액 재무 지원된 프로그램은 Copper Hill 현지의 다섯 개 표적에 걸쳐 1.000 m를 총으로 가지며 약 3주가 소요될 예정이며, 3D VTEMTM 모델링과 지표 작업에서 생성된 표적을 시험하고 표면 분석에서 1.13% Cu, 0.53% Ni, 3.54 g/t Pd+Pt를 기록했습니다. 도로로 접근 가능한 15,347헥타르의 이 부지는 Thunder Bay에서 남서쪽으로 약 50 km 떨어져 있습니다.
Prospector Metals (OTCQB : PMCOF) a lancé un premier programme de forage diamanté sur le Devon Copper-Nickel Project dans le nord-ouest de l’Ontario.
Le programme entièrement financé totalisera 1 000 m sur cinq cibles à l’occurrence Copper Hill, et devrait durer environ 3 semaines, testant des cibles générées à partir de la modélisation VTEMTM 3D et de prospection qui ont donné des essais de surface allant jusqu’à 1,13% Cu, 0,53% Ni et 3,54 g/t Pd+Pt. La propriété de 15 347 hectares, accessible par route, se situe à environ 50 km au sud-ouest de Thunder Bay.
Prospector Metals (OTCQB: PMCOF) hat auf dem Devon Copper-Nickel Project im Nordwesten von Ontario ein erstes Diamantbohrprogramm gestartet.
Das vollständig finanzierte Programm wird insgesamt 1.000 m über fünf Ziele bei der Copper Hill-Occurrence umfassen, voraussichtlich ca. 3 Wochen dauern und Ziele testen, die aus 3D VTEMTM-Modellierung und Prospektionsarbeiten entstanden sind und Oberflächenproben bis zu 1,13% Cu, 0,53% Ni und 3,54 g/t Pd+Pt geliefert haben. Die 15.347 Hektar große, straßenzugängliche Liegenschaft liegt ca. 50 km südwestlich von Thunder Bay.
Prospector Metals (OTCQB: PMCOF) بدأت برنامج حفر حجمي ماسي (درء ماسي) لأول مرة في مشروع Devon Copper-Nickel في شمال غرب أونتاريو.
سيكون البرنامج الممول بالكامل بإجمالي 1.000 م عبر ستة أهداف في وجود Copper Hill، ومن المتوقع أن يستغرق نحو 3 أسابيع، ويختبر أهداف مولَّدة من نمذجة VTEMTM ثلاثية الأبعاد وعمليات الاستكشاف التي أرجعت تحاليل سطحية حتى 1,13% Cu، و0,53% Ni، و3,54 g/t Pd+Pt. تمتد الملكية البالغة 15,347 هكتار، التي يمكن الوصول إليها عبر الطرق، على نحو 50 كم غرب جنوب غرب Thunder Bay.
Prospector Metals (OTCQB: PMCOF) 已在安大略省西北部的 Devon Copper-Nickel 项目启动首次钻探计划。
该计划全额融资，总长度为 1,000 m，覆盖 Copper Hill 地点的五个靶区，预计将持续大约 3 周，测试由 3D VTEMTM 建模与地表勘探产生的靶区，地表试样最高达到 1.13% Cu、0.53% Ni 和 3.54 g/t Pd+Pt。这处 15,347 公顷、可公路进入的资产，距离 Thunder Bay 西南约 50 公里。
- Maiden diamond drilling of 1,000 m across five targets
- Program is reported as fully financed
- VTEM identified 44 high-priority Ni-Cu targets
- Surface assays up to 1.13% Cu, 0.53% Ni, 3.54 g/t Pd+Pt
- Property is 15,347 ha and road accessible near Thunder Bay
- Surface mineralization described as modest tenor, requiring deeper testing
- Targets are previously undrilled, increasing exploration risk
- Drill program duration ~3 weeks limits immediate subsurface coverage
Vancouver, British Columbia--(Newsfile Corp. - October 7, 2025) - Prospector Metals Corp. (TSXV: PPP) (OTCQB: PMCOF) (FSE: 1ET) ("Prospector" or the "Company") today announced that it has begun its maiden drill program on the Devon Copper-Nickel (Cu-Ni) Project in Northwestern Ontario. High priority drill targets have been selected from interpretations of detailed 3D modelling of property-wide VTEMTM, as well as prospecting and mapping which returned samples with up to 1.13 % Cu, 0.53 % Ni, and 3.54 g/t Pd+Pt(1). The Devon Ni-Cu Project is road accessible and cut by paved highways.
As stated by Co-Chairman and CEO Dr. Robert Carpenter PhD. "The Devon Project was staked in January 2023 with all targets developed in house by Prospector prior to our major TESS gold discovery at the ML project announced last week. These types of base metals targets in Ontario are highly valued and have never been drilled, which represents a low-cost / high-reward exploration opportunity that will only take three weeks to drill test. The property is road accessible, and we have a strong conviction that these targets warrant drilling. The Company's next batch of drill results from ML, are from the Skarn Ridge target and are anticipated to be available in 1-2 weeks."
Key Summary
The diamond drill program will consist of 1000m of drilling testing five targets at the Copper Hill Occurrence area of the Project. The program is fully financed and is anticipated to take approximately 3 weeks to complete.
Devon Ni-Cu Project
The Devon Project comprises 15,347 hectares acquired through staking, 50km SW of Thunder Bay Ontario, and is road accessible (Figure 1). The area is intruded by numerous mafic-ultramafic intrusives (Crystal Lake Gabbro, Pigeon River and Logan intrusive), mostly dyke-form intrusions, which can contain disseminated to locally massive magmatic Ni-Cu sulfides with PGEs. The dykes are emplaced along normal faults which provide ideal conduits for deep seated fertile mafic magmas to rise quickly through the crust without losing their chalcophile elements or PGEs.
Figure 1: Surface grab samples overlaying the VTEM
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1564/269427_018f29f92480e81b_002full.jpg
Devon Project Highlights
- Results of the VTEMTM at Devon include 44 high priority Ni-Cu targets which manifest as late-time conductors and are located within or in contact with Pigeon River ultramafic source dykes. These target conductors are steeply dipping and appear distinct from the numerous flat-lying conductors associated with Logan Sills.
- A total of 219 rock samples were collected on the Project and have successfully identified variably mineralised mafic and ultramafic rocks assaying from below detection up to 1.13 % Cu, 0.53 % Ni, and 3.54 g/t Pd+Pt on previously unrecognised targets.(1)
- The surface mineralisation confirms the presence of Ni-Cu mineralisation within the right host rocks. The late-time conductors identified in the VTEMTM data and the preliminary 1D inversion conductivity modelling, together with the modest tenor of mineralisation seen at surface suggest the presence of high tenor mineralisation under cover and to depth at multiple locations.
(1) See the Companies News Release dated Oct. 28, 2025.
Assay Methodology & QA/QC
The diamond drilling on the Devon Property will consist of NQ2 size core and Will be cut in half on site using a diamond saw. One half of the core will be submitted for analysis and the other half will be held as retention in the original core box. The analytical work on the Devon project will be performed by AGAT Labs, an internationally recognized analytical services provider, at their Thunder Bay, ON location. All core samples will be prepared using procedure 200-075 (Dry, crush to
The work will be completed using industry standard procedures, including a quality assurance/quality control ("QA/QC") program consisting of the insertion of certified standard, blanks and duplicates into the sample stream.
Qualified Person
The technical content disclosed in this press release was reviewed and approved by Jodie Gibson, P.Geo., Vice President Exploration of Prospector, and a Qualified Person as defined under National Instrument NI 43-101 ("NI 43-101").
About Prospector Metals Corp.
Prospector Metals Corp. is a proud member of Discovery Group. The Company is focused on district scale, early-stage exploration of gold and base metal prospects. Creating shareholder value through new discoveries, the Company identifies underexplored or overlooked mineral districts displaying important structural and mineralogical occurrences similar to more established mining operations. Most of the acquisition activity occurs in Yukon and Ontario, Canada — Historical mining jurisdictions with an abundance of overlooked geological regions possessing high mineral potential. Prospector establishes and maintains relationships with local and Indigenous rightsholders and seeks to develop partnerships and agreements that are mutually beneficial to all interested parties.
On behalf of the Board of Directors,
Prospector Metals Corp.
Dr. Rob Carpenter, Ph.D., P.Geo.
President & CEO
For further information about Prospector Metals Corp. or this news release, please visit our website at prospectormetalscorp.com or contact Prospector at 1-778-819-5520 or by email at info@prospectormetalscorp.com.
Prospector Metals Corp. is a proud member of Discovery Group. For more information please visit: discoverygroup.ca
Forward-Looking Statement Cautions:
This press release contains certain "forward-looking statements" within the meaning of Canadian securities legislation, including, but not limited to, the Company's plans with respect to the Company's projects, including the ML Project, and the timing related thereto of the drill program, the merits of the Company's projects, the Company's objectives, plans and strategies, and other project opportunities. Although the Company believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct. Forward-looking statements are statements that are not historical facts; they are generally, but not always, identified by the words "expects," "plans," "anticipates," "believes," "intends," "estimates," "projects," "aims," "potential," "goal," "objective,", "strategy", "prospective," and similar expressions, or that events or conditions "will," "would," "may," "can," "could" or "should" occur, or are those statements, which, by their nature, refer to future events. The Company cautions that Forward-looking statements are based on the beliefs, estimates and opinions of the Company's management on the date the statements are made and they involve a number of risks and uncertainties. Consequently, there can be no assurances that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Except to the extent required by applicable securities laws and the policies of the TSX Venture Exchange, the Company undertakes no obligation to update these forward-looking statements if management's beliefs, estimates or opinions, or other factors, should change. Factors that could cause future results to differ materially from those anticipated in these forward-looking statements include the risk of accidents and other risks associated with mineral exploration operations, the risk that the Company will encounter unanticipated geological factors, or the possibility that the Company may not be able to secure permitting and other agency or governmental clearances, necessary to carry out the Company's exploration plans, risk of political uncertainties and regulatory or legal changes in the jurisdictions where the Company carries on its business that might interfere with the Company's business and prospects. The reader is urged to refer to the Company's reports, publicly available through the Canadian Securities Administrators' System for Electronic Document Analysis and Retrieval (SEDAR+) at www.sedarplus.ca for a more complete discussion of such risk factors and their potential effects.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/269427
FAQ
What is the scope of Prospector Metals' Devon drill program (PMCOF) announced October 7, 2025?
What surface assay results supported drilling at Devon (PMCOF)?
How was Devon's target list generated for PMCOF's October 2025 program?
Is the Devon drill program for PMCOF funded and where is the project located?
Who will analyze Devon drill core for PMCOF and what QA/QC is planned?
When can investors expect initial results from the Devon drilling (PMCOF)?
