Ucore Receives Louisiana Air Permit Covering Full 9,600 tpa Build-Out of Its Strategic Metals Complex
Sentiment and the balance of points
Rhea-AI Sentiment reads the wording of the document, how positive or negative its language is on a 1 to 5 scale. The balance of points shown with the takes weighs what the document actually discloses, so the two can disagree, for example when a trial that missed its main goal is described in upbeat language.
Rhea-AI Summary
Ucore Rare Metals (UURAF) received Louisiana's air permit covering the planned full build-out of its Strategic Metals Complex in Alexandria.
The Louisiana Department of Environmental Quality approved construction, testing, commissioning and operation for processing up to approximately 9,600 tonnes annually of contained total rare earth oxide. This is the final LDEQ permit required before installation of enhanced Machine A. Ucore plans to install, test and commission that initial 600-tonne annual capacity in H1 2027; detailed engineering and construction continue. The permit application used processing metrics from planned feedstocks tested at its Kingston demonstration facility. The “Minor Source” designation describes emissions below federal Title V permitting thresholds, not facility size or processing capacity.
How this balance works
Rhea-AI gives every point it takes from this document a weight. Minor counts 1, Moderate 3 and Major 9, so one Major point outweighs several Minor ones. The bar adds up the weights on each side, and when neither side holds more than 65% of the total the balance reads Mixed.
It reads the document as published, with the same rules for every company, and it does not look at what the market expected or at how the stock traded, so a point can be objectively good on a day the stock falls.
Rhea-AI Sentiment measures something else, the tone of the wording.
Hollow bars mark forward-looking points. How the balance works
Positive
- Moderate pointAir permit approved for construction through operation, covering planned capacity up to approximately 9,600 tonnes annually of contained rare earth oxide.
- Minor pointFinal LDEQ permit secured before enhanced Machine A installation.
- Minor point. Forward-looking: it has not happened yet and may not happen.Initial 600-tonne annual capacity is planned for installation, testing and commissioning in H1 2027.
Negative
- None.
AI-generated analysis. How Rhea-AI works. Not financial advice.
Ucore announces receipt of the Minor Source Air Permit from the LDEQ, based on tonnes of MREC and MREO feedstock processing planned for the SMC and conducted at its RapidSX™ Commercialization and Demonstration Facility in Kingston, Ontario
Halifax, Nova Scotia--(Newsfile Corp. - November 17, 2026) - Ucore Rare Metals Inc. (TSXV: UCU) (OTCQX: UURAF) ("Ucore" or the "Company") is pleased to announce that it has received its Minor Source Air Permit (Permit No. 2360-00177-00, the "Air Permit") for the Louisiana Strategic Metals Complex ("SMC") in Alexandria, Louisiana, from the Louisiana Department of Environmental Quality ("LDEQ"). The Air Permit application was based on processing metrics developed from the tonnes of mixed rare earth carbonate ("MREC") and mixed rare earth oxide ("MREO") feedstocks (planned for the SMC) processed at the RapidSX™ Commercialization and Demonstration Facility ("CDF") in Kingston, Ontario, Canada. The Air Permit was approved for the construction, testing, commissioning, and operation of the SMC, from enhanced 'Machine A' through the planned full build-out, processing up to ≈9,600 tonnes per annum ("tpa") of contained total rare earth oxide ("TREO").
In Louisiana, a minor source permit applies to facilities whose potential emissions fall below the thresholds that require a federal Title V (Part 70) operating permit. "Minor Source" describes the facility's emissions category, not its size or processing capacity.
"Ucore is very appreciative of the LDEQ and the State of Louisiana for facilitating an efficient permitting process based on our extensive demonstration work at the CDF," said Mike Schrider, P.E., Ucore's Vice President and Chief Operating Officer. "With the Air Permit in hand and regular coordination with the State Fire Marshal and the England Airpark, Ucore continues detailed engineering and construction of an advanced-technology separation facility. This facility, starting with enhanced Machine A, will process feedstock from multiple Western sources into a wide range of separated products, including NdPr, samarium, gadolinium, and yttrium, for the United States, Canada, and their allies."
"Each Company milestone achieved is a building block toward commissioning enhanced Machine A in the first half of 2027 and, beyond that, supplying medium and heavy rare earth oxides to Western markets."
The Air Permit is the final LDEQ permit required before enhanced 'Machine A' can be installed from the full-commercial-scale RapidSX™ construction details developed at the Kingston CDF.
Photos of the completed full-commercial-scale RapidSX™ contactor testing at the CDF in Kingston, Ontario, Canada
Left to right: (2)x8" (enhanced Machine A), (4)x12" and (1)x24" automated contactor columns
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/1119/324475_10838cd354239899_002full.jpg
Ucore's primary focus is to advance the commercial deployment of its RapidSX™ rare earth separation technology at its SMC in Alexandria, Louisiana. This begins with installing, testing, and commissioning its first 600 tpa of TREO processing capacity, enhanced 'Machine A', in H1 2027.
# # #
About Ucore Rare Metals Inc.
Ucore is focused on rare-earth and critical-metal resources, extraction, beneficiation, and separation technologies with the potential for production, growth, and scalability. Ucore's vision and plan is to become a leading advanced technology company, providing best-in-class metal separation products and services to the mining and mineral extraction industry.
Through strategic partnerships, Ucore aims to support the development of a more diversified and resilient North American Rare Earth Elements ("REE") supply chain through the near-term development of a heavy and light rare-earth processing facility in the US State of Louisiana, subsequent SMCs in Canada and Alaska and the longer-term development of Ucore's
Ucore is listed on the TSXV under the trading symbol "UCU" and in the United States on the OTC Markets' OTCQX® Best Market under the ticker symbol "UURAF."
For further information, please visit www.ucore.com.
Forward-Looking Statements
This press release contains "forward-looking information" and "forward-looking statements" (collectively "forward-looking statements") within the meaning of applicable Canadian securities laws. All statements in this release (other than statements of historical facts) that address future business development, technological development and/or acquisition activities (including any related required financings), timelines, events, or developments that the Company is pursuing are forward-looking statements, including without limitation statements with respect to: the scope, conditions and continued validity of submitted permits, including their coverage of future phases of the SMC; the receipt and timing of remaining permits and approvals; the timing of installation, testing and commissioning of enhanced Machine A in H1 2027; the planned scale-up of the SMC to ≈9,600 tpa; the future supply of medium and heavy rare earth oxides; the progress of development at the Louisiana SMC and any subsequent SMCs; and future development plans. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance or results, and actual results or developments may differ materially from those in forward-looking statements.
For additional risks and uncertainties regarding the Company, its business activities, its ability to qualify for and receive any additional funding from any U.S. or Canadian government, the Company's Commercialization and Demonstration Facility ("CDF") and the aforementioned projects (generally), see the risk disclosure in the Base Shelf Prospectus and the Prospectus Supplement, and in the continuous disclosure documents filed by the Company on SEDAR+ (http://www.sedarplus.ca), including the Company's annual information form for the year ended December 31, 2025 (filed on SEDAR+ on June 8, 2026) and MD&A for Q2-2026 (filed on SEDAR+ on August 26, 2026), as well as the risks described below.
Regarding the disclosure above in the "About Ucore Rare Metals Inc." section, the Company has assumed that it will be able to procure or retain additional partners and/or suppliers, in addition to Innovation Metals Corp. ("IMC"), as suppliers for Ucore's expected future SMCs. Ucore has also assumed that sufficient external funding will be found to continue and complete the ongoing research and development work required at the CDF and also later prepare a new technical report in compliance with National Instrument 43-101 - Standards of Disclosure for Mineral Projects that demonstrates that Bokan is feasible and economically viable for the production of both REE and co-product metals and the then prevailing market prices based upon assumed customer offtake agreements. Ucore has also assumed that sufficient external funding will be secured to continue the development of the specific engineering plans for the SMCs and their construction and eventual commissioning and operations.
Forward-looking statements are based on a number of material assumptions, including, without limitation: the successful completion and accuracy of baseline, front-end-engineering design and detailed engineering studies; the ability to complete further engineering, procurement, and construction activities as currently contemplated; the availability, cost, and timely delivery of equipment, materials, utilities, labour and construction services; the Company's ability to secure sufficient financing on acceptable terms; the receipt and timing of all required permits and approvals; the successful scale-up and commercial deployment of RapidSX™ technology from demonstration to commercial operation; the availability of qualified feedstock from third-party suppliers; successful customer qualification and offtake discussions; continued support from governmental partners; and general economic, market, and industry conditions, including assumptions regarding rare earth oxide prices, which are subject to significant volatility.
Although the Company believes that the assumptions underlying the forward-looking information are reasonable, there can be no assurance that such assumptions will prove to be accurate or that the anticipated results, performance, or achievements will be realized. Actual results may differ materially from those expressed or implied by the forward-looking information. Factors that could cause actual results to differ materially include, without limitation: risks associated with the development, scale-up, and commercialization of new or unproven technologies; the risk that RapidSX™ may not perform at commercial scale as expected; engineering design changes; inaccuracies in capital or operating cost estimates; cost escalation due to inflation, supply chain disruption, or market conditions; delays or failures in procurement, construction, or commissioning; the inability to obtain or maintain required permits, approvals, or regulatory authorizations; the risk that permits are appealed, challenged or modified, or that the SMC's design, throughput or emissions at commercial scale differ from the demonstration-scale data on which the permit applications are based, requiring an amendment to the permits; challenges in securing adequate financing; adverse capital market conditions; variability in feedstock supply, quality, or pricing; failure to secure or maintain commercial relationships, customer qualification, or offtake arrangements; fluctuations and uncertainty in rare earth oxide prices and demand; the risk that indicative or quoted market prices, including for ex-China markets, may not be realized; operational risks once in production, including equipment failures or lower-than-expected recoveries; geopolitical risk; changes in applicable laws or regulations; environmental or permitting challenges; loss of key personnel; and general economic, business, or competitive conditions.
Neither the TSXV nor its Regulation Services Provider (as that term is defined by the TSXV) accept responsibility for the adequacy or accuracy of this release.
CONTACTS
Michael Schrider, P.E., Ucore Vice President and Chief Operating Officer, is responsible for the content of this news release and may be contacted at 1.902.482.5214.
For additional information, please contact:
Mark MacDonald
Vice President, Investor Relations
Ucore Rare Metals Inc.
1.902.482.5214
mark@ucore.com

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/324475
FAQ
AI-generated questions and answers. How Rhea-AI works. Not financial advice.
What does Ucore's Louisiana air permit cover?
The permit covers construction, testing, commissioning and operation of the Strategic Metals Complex, from enhanced Machine A through the planned full build-out processing up to approximately 9,600 tonnes annually of contained total rare earth oxide.
When does Ucore plan to commission enhanced Machine A?
Ucore plans to install, test and commission enhanced Machine A in H1 2027. This initial phase represents 600 tonnes annually of total rare earth oxide processing capacity at the Louisiana Strategic Metals Complex.
