Friedman Industries September earnings hit $15.6M
A September amendment expanded the ABL facility to $200 million, with $101.7 million outstanding at September 30, 2026.
Sentiment and the balance of points
Rhea-AI Sentiment reads the wording of the document, how positive or negative its language is on a 1 to 5 scale. The balance of points shown with the takes weighs what the document actually discloses, so the two can disagree, for example when a trial that missed its main goal is described in upbeat language.
Friedman Industries, Incorporated (FRD) reported net sales of $286.8 million and net earnings of $15.6 million for the three months ended September 30, 2026, compared with $152.4 million and $2.2 million, respectively, a year earlier. For the six months, sales were $526.8 million versus $287.2 million, and net earnings were $28.4 million versus $7.3 million. Management attributed sales growth to higher average selling prices and volume, including added volume from Century.
Quarterly adjusted gross profit was $75.0 million, compared with $26.3 million. Management attributed margin expansion to rising hot-rolled coil prices, solid demand and constrained supply. Economic-hedge charges were $14.6 million for the quarter, including $9.8 million of unrealized mark-to-market charges on open positions. In September, the company amended its asset-based lending facility, increasing its size from $140 million to $200 million; $101.7 million was outstanding at September 30, 2026, at a 5.55% applicable interest rate. Six-month operating cash flow was $13.4 million, versus $15.9 million.
How this balance works
Rhea-AI gives every point it takes from this document a weight. Minor counts 1, Moderate 3 and Major 9, so one Major point outweighs several Minor ones. The bar adds up the weights on each side, and when neither side holds more than 65% of the total the balance reads Mixed.
It reads the document as published, with the same rules for every company, and it does not look at what the market expected or at how the stock traded, so a point can be objectively good on a day the stock falls.
Rhea-AI Sentiment measures something else, the tone of the wording.
Positive
- Moderate pointQuarterly net sales were $286.8 million, versus $152.4 million a year earlier.
- Moderate pointQuarterly net earnings were $15.6 million, versus $2.2 million a year earlier.
Negative
- Moderate pointSix-month operating cash flow was $13.4 million, versus $15.9 million.
- Moderate pointQuarterly economic-hedge charges totaled $14.6 million, including $9.8 million unrealized. 5.7% of market cap
Filing Explained
Restricted-stock issuance increased shares issued by September 30, reducing existing holders' percentage ownership; 416,396 award shares remain available, and no repurchases occurred in the quarter.
This Form 10-Q is the company's unaudited quarterly report for the six months ended
Under the 2025 Long-Term Incentive Plan, up to 550,000 common shares may be awarded; 416,396 remained available at
Key Figures
Key Terms
adjusted gross profit financial
mark-to-market financial
asset-based lending facility financial
springing financial covenant financial
FAQ
AI-generated questions and answers. How Rhea-AI works. Not financial advice.
What were FRD's sales and earnings in the September 2026 quarter?
How much did FRD record in hedge charges for the September 2026 quarter?
How large is FRD's ABL facility, and how much was outstanding?
AI-generated analysis. How Rhea-AI works. Not financial advice.
Table of Contents
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
FOR THE QUARTERLY PERIOD ENDED
OR
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
FROM THE TRANSITION PERIOD FROM TO
COMMISSION FILE NUMBER
FRIEDMAN INDUSTRIES, INCORPORATED
(Exact name of registrant as specified in its charter)
(State or other jurisdiction of incorporation or organization) | (I.R.S. Employer Identification Number) |
(Address of principal executive offices) (Zip Code)
Registrant’s telephone number, including area code (
Former name, former address and former fiscal year, if changed since last report
Securities registered pursuant to Section 12(b) of the Act:
Title of each class |
| Trading Symbol |
| Name of each exchange |
|
|
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).
Table of Contents
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer | ☐ | ☒ | |
|
|
|
|
Non-accelerated filer | ☐ | Smaller reporting company | |
|
|
|
|
|
| Emerging growth company |
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). (Check one): Yes
At November 5, 2026, the number of shares outstanding of the issuer’s only class of stock was
Table of Contents
TABLE OF CONTENTS
Part I — FINANCIAL INFORMATION |
4 |
Item 1. Financial Statements (Unaudited) |
4 |
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations |
20 |
Item 3. Quantitative and Qualitative Disclosures About Market Risk |
25 |
Item 4. Controls and Procedures |
25 |
Part II — OTHER INFORMATION |
26 |
Item 2. Issuer Purchases of Equity Securities |
26 |
Item 5. Other Information |
26 |
Item 6. Exhibits |
27 |
SIGNATURES |
28 |
3
Table of Contents
Part I — FINANCIAL INFORMATION
Item 1. Financial Statements
FRIEDMAN INDUSTRIES, INCORPORATED
CONDENSED CONSOLIDATED BALANCE SHEETS — UNAUDITED
(In thousands, except for share data)
|
| SEPTEMBER 30, 2026 |
|
| MARCH 31, 2026 |
| ||
ASSETS |
|
|
|
|
|
|
|
|
CURRENT ASSETS: |
|
|
|
|
|
|
|
|
Cash |
| $ |
|
| $ |
| ||
Accounts receivable, net of allowances for credit losses of $628 and $426 at September 30, and March 31, 2026, respectively |
|
|
|
|
|
| ||
Inventories |
|
|
|
|
|
| ||
Current portion of derivative assets |
|
|
|
|
|
| ||
Income tax receivable |
|
|
|
|
|
| ||
Other current assets |
|
|
|
|
|
| ||
TOTAL CURRENT ASSETS |
|
|
|
|
|
| ||
PROPERTY, PLANT AND EQUIPMENT: |
|
|
|
|
|
|
|
|
Land |
|
|
|
|
|
| ||
Buildings and yard improvements |
|
|
|
|
|
| ||
Machinery and equipment |
|
|
|
|
|
| ||
Construction in process |
|
|
|
|
|
| ||
Less accumulated depreciation |
|
| ( | ) |
|
| ( | ) |
|
|
|
|
|
|
| ||
OTHER ASSETS: |
|
|
|
|
|
|
|
|
Operating lease right-of-use asset |
|
|
|
|
|
| ||
Other assets |
|
|
|
|
|
| ||
TOTAL ASSETS |
| $ |
|
| $ |
| ||
LIABILITIES AND STOCKHOLDERS’ EQUITY |
|
|
|
|
|
|
|
|
CURRENT LIABILITIES: |
|
|
|
|
|
|
|
|
Accounts payable and accrued expenses |
| $ |
|
| $ |
| ||
Income taxes payable |
|
|
|
|
|
| ||
Dividends payable |
|
|
|
|
|
| ||
Employee compensation and related expenses |
|
|
|
|
|
| ||
Current portion of derivative liability |
|
|
|
|
|
| ||
Current portion of contingent consideration liability |
|
|
|
|
|
| ||
TOTAL CURRENT LIABILITIES |
|
|
|
|
|
| ||
POSTRETIREMENT BENEFITS OTHER THAN PENSIONS |
|
|
|
|
|
| ||
DEFERRED INCOME TAX LIABILITY |
|
|
|
|
|
| ||
NON-CURRENT LEASE LIABILITIES |
|
|
|
|
|
| ||
SELLER NOTE PAYABLE, NET |
|
|
|
|
|
| ||
NON-CURRENT CONTINGENT CONSIDERATION LIABILITY |
|
|
|
|
|
| ||
ASSET BASED LENDING FACILITY |
|
|
|
|
|
| ||
TOTAL LIABILITIES |
|
|
|
|
|
| ||
COMMITMENTS AND CONTINGENCIES (SEE NOTE 2) |
|
|
|
|
|
|
|
|
STOCKHOLDERS’ EQUITY: |
|
|
|
|
|
|
|
|
Common stock, par value $1: Authorized shares — 10,000,000; Issued shares — 9,124,805 and 9,019,505 shares at September 30, and March 31, 2026, respectively |
|
|
|
|
|
| ||
Additional paid-in capital |
|
|
|
|
|
| ||
Treasury stock at cost (1,912,014 shares and 1,907,323 shares at September 30, and March 31, 2026, respectively) |
|
| ( | ) |
|
| ( | ) |
Retained earnings |
|
|
|
|
|
| ||
TOTAL STOCKHOLDERS’ EQUITY |
|
|
|
|
|
| ||
TOTAL LIABILITIES AND STOCKHOLDERS’ EQUITY |
| $ |
|
| $ |
| ||
The accompanying notes are an integral part of these financial statements.
4
Table of Contents
FRIEDMAN INDUSTRIES, INCORPORATED
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS — UNAUDITED
(In thousands, except per share data)
|
| THREE MONTHS ENDED |
|
| SIX MONTHS ENDED |
| ||||||||||
|
| SEPTEMBER 30, |
|
| SEPTEMBER 30, |
| ||||||||||
|
| 2026 |
|
| 2025 |
|
| 2026 |
|
| 2025 |
| ||||
Net sales |
| $ |
|
| $ |
|
| $ |
|
| $ |
| ||||
Costs and expenses: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Costs of materials sold (excludes items shown separately below) |
|
|
|
|
|
|
|
|
|
|
|
| ||||
Processing and warehousing expense |
|
|
|
|
|
|
|
|
|
|
|
| ||||
Delivery expense |
|
|
|
|
|
|
|
|
|
|
|
| ||||
Selling, general and administrative |
|
|
|
|
|
|
|
|
|
|
|
| ||||
Depreciation and amortization |
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
EARNINGS FROM OPERATIONS |
|
|
|
|
|
|
|
|
|
|
|
| ||||
Gain (loss) on economic hedges of risk |
|
| ( | ) |
|
|
|
|
| ( | ) |
|
|
| ||
Interest expense |
|
| ( | ) |
|
| ( | ) |
|
| ( | ) |
|
| ( | ) |
Other income (expense) |
|
|
|
|
|
|
|
| ( | ) |
|
|
| |||
EARNINGS BEFORE INCOME TAXES |
|
|
|
|
|
|
|
|
|
|
|
| ||||
Provision for (benefit from) income taxes: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Current |
|
|
|
|
|
|
|
|
|
|
|
| ||||
Deferred |
|
| ( | ) |
|
| ( | ) |
|
| ( | ) |
|
| ( | ) |
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
NET EARNINGS |
| $ |
|
| $ |
|
| $ |
|
| $ |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net earnings per share: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic |
| $ |
|
| $ |
|
| $ |
|
| $ |
| ||||
Diluted |
| $ |
|
| $ |
|
| $ |
|
| $ |
| ||||
Cash dividends declared per common share |
| $ |
|
| $ |
|
| $ |
|
| $ |
| ||||
The accompanying notes are an integral part of these financial statements.
5
Table of Contents
FRIEDMAN INDUSTRIES, INCORPORATED
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS — UNAUDITED
(In thousands)
|
| SIX MONTHS ENDED SEPTEMBER 30, |
| |||||
|
| 2026 |
|
| 2025 |
| ||
OPERATING ACTIVITIES |
|
|
|
|
|
|
|
|
Net earnings |
| $ |
|
| $ |
| ||
Adjustments to reconcile net earnings to cash provided by operating activities: |
|
|
|
|
|
|
|
|
Depreciation and amortization |
|
|
|
|
|
| ||
Deferred taxes |
|
| ( | ) |
|
| ( | ) |
Compensation expense for restricted stock |
|
|
|
|
|
| ||
Change in postretirement benefits |
|
| ( | ) |
|
|
| |
Change in cash surrender value of officers' life insurance |
|
|
|
|
| ( | ) | |
Loss (gain) recognized on open derivatives not designated for hedge accounting |
|
|
|
|
| ( | ) | |
Amortization of right-of-use asset |
|
|
|
|
|
| ||
Decrease (increase) in operating assets net of amounts acquired in business combination: |
|
|
|
|
|
|
|
|
Accounts receivable |
|
| ( | ) |
|
| ( | ) |
Inventories |
|
| ( | ) |
|
| ( | ) |
Federal income taxes recoverable |
|
|
|
|
|
| ||
Other current assets |
|
| ( | ) |
|
| ( | ) |
Other assets |
|
|
|
|
| ( | ) | |
Increase (decrease) in operating liabilities net of amounts acquired in business combination: |
|
|
|
|
|
|
|
|
Accounts payable and accrued expenses |
|
|
|
|
|
| ||
Income taxes payable |
|
|
|
|
| ( | ) | |
Employee compensation and related expenses |
|
|
|
|
|
| ||
NET CASH PROVIDED BY OPERATING ACTIVITIES |
|
|
|
|
|
| ||
INVESTING ACTIVITIES |
|
|
|
|
|
|
|
|
Century business combination, net |
|
|
|
|
| ( | ) | |
Purchase of property, plant and equipment |
|
| ( | ) |
|
| ( | ) |
NET CASH USED IN INVESTING ACTIVITIES |
|
| ( | ) |
|
| ( | ) |
FINANCING ACTIVITIES |
|
|
|
|
|
|
|
|
Debt issuance cost |
|
|
|
|
| ( | ) | |
Cash dividends paid |
|
| ( | ) |
|
| ( | ) |
Cash paid for share repurchases |
|
| ( | ) |
|
| ( | ) |
Borrowings on asset based lending facility |
|
|
|
|
|
| ||
Repayments on asset based lending facility |
|
| ( | ) |
|
| ( | ) |
NET CASH PROVIDED BY FINANCING ACTIVITIES |
|
|
|
|
|
| ||
INCREASE IN CASH AND RESTRICTED CASH |
|
|
|
|
|
| ||
CASH AND RESTRICTED CASH AT BEGINNING OF PERIOD |
|
|
|
|
|
| ||
CASH AND RESTRICTED CASH AT END OF PERIOD |
| $ |
|
| $ |
| ||
Cash and restricted cash at September 30, 2026 and March 31, 2026 included approximately $
The accompanying notes are an integral part of these financial statements.
6
Table of Contents
FRIEDMAN INDUSTRIES, INCORPORATED
CONDENSED NOTES TO QUARTERLY REPORT — UNAUDITED
NOTE 1 — BASIS OF PRESENTATION
The accompanying unaudited, condensed consolidated financial statements have been prepared in accordance with the instructions to Form 10-Q and do not include all of the information and footnotes required by U.S. generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments (consisting of normal recurring accruals) considered necessary for a fair presentation have been included. For further information, refer to the consolidated financial statements and footnotes of Friedman Industries, Incorporated (the “Company”) included in its annual report on Form 10-K for the year ended March 31, 2026.
NOTE 2 — BUSINESS COMBINATIONS
On August 29, 2025 (the “Acquisition Date”), the Company acquired certain assets and liabilities of Century Metals & Supplies Inc. based in Miami, Florida. The Company acquired the working capital, buildings, processing and other equipment, and the related real estate (the “Transaction”). In addition to the owned facilities in Miami, the Transaction also included leased distribution and warehouse facilities in Orlando, Florida and Tampa, Florida. The operations continue as Century Metals and Supplies LLC ("Century"), a wholly owned subsidiary of the Company. Century is a metals processing company with cut-to-length and coil slitting capabilities which operates as part of the Company's flat-roll business segment. As a result of the Transaction, the Company expanded its presence in the southeastern U.S. and Latin American markets and broadened the Company's product offerings to include cold-rolled, coated, and stainless steels, as well as non-ferrous materials such as aluminum, copper, and brass.
The Transaction resulted in the Company acquiring all the ownership interests in the assets noted above, for total consideration of approximately $
The seller’s note was fair valued using a discounted cash flow analysis of the expected future payments, for which the significant inputs included the rate of return based on a reference rate plus a spread and the expected cash flows associated with the seller’s note over the remaining time to maturity. The contingent consideration was fair valued using a Monte Carlo simulation of the potential cash payments to the sellers utilizing an estimate of the average future EBITDA, which was discounted to present value. The significant inputs to the Monte Carlo simulation included projected future EBITDA, a discount rate, EBITDA targets, maximum payout and EBITDA volatility. Such contingent consideration is required to be measured at fair value at inception and at each reporting period. There were no changes to the valuation methodology during the interim period. As of September 30, 2026, the value of the contingent consideration was approximately $
7
Table of Contents
The Transaction was accounted for using the acquisition method of accounting, in accordance with Topic 805, Business Combinations, whereby the consideration transferred and the acquired identifiable assets and liabilities assumed are recorded at their respective fair values. The excess of the consideration transferred over the fair values of these identifiable net assets is recorded as goodwill. The Transaction resulted in no residual goodwill.
Fair value of assets acquired and liabilities assumed (in thousands): |
|
|
|
|
Accounts receivable |
| $ |
| |
Inventory |
|
|
| |
Property, plant and equipment |
|
|
| |
Operating lease right-of-use asset |
|
|
| |
Other assets |
|
|
| |
Accounts payable |
|
| ( | ) |
Operating lease liability |
|
| ( | ) |
Total |
| $ |
|
NOTE 3 — NEW ACCOUNTING PRONOUNCEMENTS
In November 2024, the Financial Accounting Standards Board issued Accounting Standards Update No. 2024-03, Income Statement – Reporting Comprehensive Income – Expense Disaggregation Disclosures: Disaggregation of Income Statement Expenses (“ASU 2024-03”). ASU 2024-03 will require more detailed information about the types of expenses in commonly presented income statement captions such as “Cost of sales” and “Selling, general and administrative expenses”. The new guidance is effective for annual reporting periods beginning after December 15, 2026, and interim reporting periods beginning after December 15, 2027 with early adoption permitted. The Company is evaluating the impact that adoption of the provisions of ASU 2024-03 will have on its consolidated financial statements.
NOTE 4 — INVENTORIES
The Company operates in two segments: the flat-roll segment and the tubular segment. Both the flat-roll segment and tubular segment inventories consist of raw material and finished goods. Cost for all of the Company's flat-roll segment inventory, except for inventory of the Century Metals & Supplies subsidiary, is determined using the weighted average cost method. The cost of Century's inventory is determined using the specific identification method. Cost for all of the Company's tubular segment inventory is determined using the weighted average cost method. All inventories are valued at the lower of cost or net realizable value. Flat-roll raw material inventory consists primarily of carbon steel, stainless steel and aluminum flat-roll products the Company will process into sheet, plate or slit coil. Flat-roll finished goods consists of processed sheet, plate or slit coil inventory. Tubular raw material inventory consists of hot-rolled steel coils that the Company will manufacture into pipe. Tubular finished goods inventory consists of pipe the Company has manufactured. Inventory costs include the costs of the purchased metals, inbound freight, transfer freight, certain external processing, internal processing, direct labor and applicable overhead costs.
8
Table of Contents
A summary of inventory values by product group follows (in thousands):
| | September 30, 2026 | | | March 31, 2026 | | ||
Flat-Roll raw material | | $ | | | $ | | ||
Flat-Roll finished goods | | | | | | | ||
Tubular raw material | | | | | | | ||
Tubular finished goods | | | | | | | ||
| | $ | | | $ | | ||
NOTE 5 — DEBT
The Company has an asset-based lending facility ("ABL Facility") led by JPMorgan Chase Bank, N.A. with Wells Fargo Bank, N.A. as a 40% syndicated participant. During September 2026, the Company completed an amendment to the ABL Facility expanding the size of the facility from $
The Company issued a seller's note of $
NOTE 6 — LEASES
In June 2026, the Company entered into a new operating lease for additional warehouse space in Miami, FL for Century's operations. This lease expires July 31, 2029 and calls for monthly rental payments of approximately $
9
Table of Contents
The Company determines if an arrangement contains a lease at inception based on if the arrangement conveys the right to control the use of an identified asset for a period of time in exchange for consideration and allows the Company to obtain substantially all of the economic benefit from the use of the identified asset. Certain lease agreements contain rent escalation clauses and one or more options to extend the lease. The Company considers these provisions when calculating operating lease obligations. The Company uses its incremental borrowing rate at lease commencement to determine the present value of lease payments.
The components of expense related to leases for the three and six months ended September 30, 2026 and 2025 are as follows (in thousands):
| | Three Months Ended | | | Six Months Ended | | ||||||||||
| | September 30, | | | September 30, | | ||||||||||
| | 2026 | | | 2025 | | | 2026 | | | 2025 | | ||||
Operating lease expense | | $ | | | $ | | | $ | | | $ | | ||||
| | $ | | | $ | | | $ | | | $ | | ||||
The following table illustrates the balance sheet classification for ROU assets and lease liabilities as of September 30, 2026 and March 31, 2026 (in thousands):
|
| September 30, 2026 |
|
| March 31, 2026 |
| Balance Sheet Classification | ||
Assets |
|
|
|
|
|
|
|
|
|
Operating lease right-of-use asset |
| $ |
|
| $ |
| Operating lease right-of-use asset | ||
Total right-of-use assets |
| $ |
|
| $ |
|
| ||
Liabilities |
|
|
|
|
|
|
|
|
|
Operating lease liability, current |
| $ |
|
| $ |
| Accrued expenses | ||
Operating lease liability, non-current |
|
|
|
|
|
| Non-current lease liabilities | ||
Total lease liabilities |
| $ |
|
| $ |
|
| ||
As of September 30, 2026, the weighted-average remaining lease term was
Maturities of lease liabilities as of September 30, 2026 were as follows (in thousands):
|
| Operating Leases |
| |
Fiscal 2027 (remainder of fiscal year) |
|
|
| |
Fiscal 2028 |
|
|
| |
Fiscal 2029 |
|
|
| |
Fiscal 2030 |
|
|
| |
Fiscal 2031 and beyond |
|
|
| |
Total undiscounted lease payments |
| $ |
| |
Less: imputed interest |
|
| ( | ) |
Present value of lease liability |
| $ |
| |
10
Table of Contents
NOTE 7 — PROPERTY, PLANT AND EQUIPMENT
At September 30, 2026, the Company's construction in process balance of approximately $
NOTE 8 — STOCK BASED COMPENSATION
The Company maintains two stock based compensation plans: the Friedman Industries, Incorporated 2016 Restricted Stock Plan (the “2016 Plan”) and the Friedman Industries, Incorporated 2025 Long-Term Incentive Plan (the "2025 Plan"). The plans are administered by the Compensation Committee of the Board of Directors (the “Board”) and continue indefinitely until terminated by the Board or until all shares allowed by the plans have been awarded and earned. All shares authorized under the 2016 Plan have been awarded with some of those shares still under vesting restrictions at September 30, 2026. Under the 2025 Plan, the Company may award stock-based compensation to employees, non-employee directors and third-party service providers. The 2025 Plan permits the award of stock options, restricted stock awards, restricted stock units, stock appreciation rights and other stock-based awards for up to
The following table summarizes the activity related to restricted stock awards for the six months ended September 30, 2026:
|
|
|
|
|
| Weighted Average |
| |
|
| Number of Shares |
|
| Grant Date Fair Value Per Share |
| ||
Unvested at March 31, 2026 |
|
|
|
| $ |
| ||
Granted |
|
|
|
|
|
| ||
Vested |
|
| ( | ) |
|
|
| |
Unvested at September 30, 2026 |
|
|
|
| $ |
| ||
The Company measures compensation expense for restricted stock awards at the market price of the common stock as of the grant date. Compensation expense for awards with time-based restrictions is recognized over the requisite service period applicable to each award. Compensation expense for awards with performance-based restrictions is recognized once it is probable the performance conditions will be satisfied with a cumulative effect adjustment and the remaining expense recognized over the remaining service period. The stock awards granted during the six months ended September 30, 2026 consist of
11
Table of Contents
NOTE 9 — DERIVATIVE FINANCIAL INSTRUMENTS
The Company utilizes futures, options and swaps to manage our exposure to metals price risk that is inherent in our business. For the six months ended September 30, 2026 and 2025, all of the Company's hedging activities were classified as economic hedges of risk with mark-to-market ("MTM") accounting treatment. By using derivatives, the Company is exposed to credit and market risk. The Company’s exposure to credit risk includes the counterparty’s failure to fulfill its performance obligations under the terms of the derivative contract. The Company attempts to minimize its credit risk by entering into transactions with high quality counterparties and uses exchange-traded derivatives when available. Market risk is the risk that the value of the financial instrument might be adversely affected by a change in commodity prices. The Company manages market risk by continually monitoring exposure within its risk management strategy and portfolio. For any transactions designated as hedging instruments for accounting purposes, we document all relationships between hedging instruments and hedged items, as well as our risk-management objective and strategy for undertaking the various hedge transactions. We also assess, both at the hedge’s inception and on an ongoing basis, whether the derivatives used in hedging transactions are highly effective in offsetting changes in cash flows or fair value of hedged items.
The Company has forward physical purchase supply agreements in place with some of its suppliers for a portion of its monthly physical steel needs. These supply agreements are not subject to mark-to-market accounting due to the Company electing the normal purchase normal sale exclusion provided in ASC 815.
At September 30, 2026 and March 31, 2026, the Company did not have any derivatives designated as hedging instruments and classified as cash flow or fair value hedges.
The following table summarizes the fair value of the Company’s derivative financial instruments and the respective line in which they were recorded in the Consolidated Balance Sheet as of September 30, 2026 (in thousands):
| Asset Derivatives |
| Liability Derivatives |
| ||||||
| Balance Sheet |
|
|
|
| Balance Sheet |
|
|
|
|
Derivatives not designated as hedging instruments: | Location |
| Fair Value |
| Location |
| Fair Value |
| ||
Hot-rolled coil steel contracts | Current portion of derivative assets |
| $ |
| Current portion of derivative liability |
| $ |
| ||
The following table summarizes the fair value of the Company’s derivative financial instruments and the respective line in which they were recorded in the Consolidated Balance Sheet as of March 31, 2026 (in thousands):
| Asset Derivatives |
| Liability Derivatives |
| ||||||
| Balance Sheet |
|
|
|
| Balance Sheet |
|
|
|
|
Derivatives not designated as hedging instruments: | Location |
| Fair Value |
| Location |
| Fair Value |
| ||
Hot-rolled coil steel contracts | Current portion of derivative assets |
| $ |
| Current portion of derivative liability |
| $ |
| ||
All derivatives are presented on a gross basis on the Consolidated Balance Sheets.
During the six months ended September 30, 2026 and 2025, the Company entered into hot-rolled coil futures and swap contracts that were not designated as hedging instruments for accounting purposes. Accordingly, the change in fair value related to these instruments was immediately recognized in earnings for these periods. During the six months ended September 30, 2026 and 2025, the Company did not designate any transactions as hedging instruments for accounting purposes.
12
Table of Contents
The following table summarizes the loss recognized in earnings for derivative instruments not designated as hedging instruments during the three and six months ended September 30, 2026 (in thousands):
| | | Loss Recognized in Earnings | | |
| Location of Loss | | for the Three Months Ended | | |
| Recognized in Earnings | | September 30, 2026 | | |
Hot-rolled coil steel contracts | Gain (loss) on economic hedges of risk | | $ | ( | ) |
|
|
| Loss Recognized in Earnings |
| |
| Location of Loss |
| for the Six Months Ended |
| |
| Recognized in Earnings |
| September 30, 2026 |
| |
Hot-rolled coil steel contracts | Gain (loss) on economic hedges of risk |
| $ | ( | ) |
The following table summarizes the gain recognized in earnings for derivative instruments not designated as hedging instruments during the three and six months ended September 30, 2025 (in thousands):
|
|
| Gain Recognized in Earnings |
| |
| Location of Gain |
| for the Three Months Ended |
| |
| Recognized in Earnings |
| September 30, 2025 |
| |
Hot-rolled coil steel contracts | Gain (loss) on economic hedges of risk |
| $ |
| |
|
|
| Gain Recognized in Earnings |
| |
| Location of Gain |
| for the Six Months Ended |
| |
| Recognized in Earnings |
| September 30, 2025 |
| |
Hot-rolled coil steel contracts | Gain (loss) on economic hedges of risk |
| $ |
| |
The following table summarizes the Company's economic (non-designated) derivative instruments outstanding at September 30, 2026 (in thousands):
| | Notional Amount | | Maturity Date | |
Hot-rolled coil steel contracts | | $ | ( | ) | October 2026 - June 2027 |
The following table summarizes the Company's economic (non-designated) derivative instruments outstanding at March 31, 2026 (in thousands):
| |
Notional Amount | |
Maturity Date | |
|
Hot-rolled coil steel contracts | | $ | ( | ) |
April 2026 - May 2027 |
At September 30, 2026 and March 31, 2026, cash of approximately $
13
Table of Contents
NOTE 10 — FAIR VALUE MEASUREMENTS
Accounting standards provide a comprehensive framework for measuring fair value, define fair value, and establish a hierarchy prioritizing the inputs to valuation techniques. The hierarchy gives the highest priority to quoted prices in active markets for identical assets and liabilities and the lowest priority to unobservable inputs. Levels within the hierarchy are defined as follows:
| ● | Level 1 – Quoted prices for identical assets and liabilities in active markets. |
| ● | Level 2 – Inputs other than quoted prices included within Level 1 that are observable for the assets and liabilities, either directly or indirectly. |
| ● | Level 3 – Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets and liabilities. |
Recurring Fair Value Measurements
At September 30, 2026, our financial assets and liabilities, measured at fair value on a recurring basis were as follows (in thousands):
|
| Quoted Prices |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| in Active |
|
| Significant |
|
|
|
|
|
|
|
|
| ||
|
| Markets for |
|
| Other |
|
| Significant |
|
|
|
|
| |||
|
| Identical |
|
| Observable |
|
| Unobservable |
|
|
|
|
| |||
|
| Assets |
|
| Inputs |
|
| Inputs |
|
|
|
|
| |||
|
| (Level 1) |
|
| (Level 2) |
|
| (Level 3) |
|
| Total |
| ||||
Commodity futures – financial liabilities, net |
| $ | ( | ) |
| $ |
|
| $ |
|
| $ | ( | ) | ||
Contingent consideration for business combination - financial liability |
| $ |
|
| $ |
|
| $ | ( | ) |
| $ | ( | ) | ||
Total |
| $ | ( | ) |
| $ |
|
| $ | ( | ) |
| $ | ( | ) | |
At March 31, 2026, our financial assets and liabilities, measured at fair value on a recurring basis were as follows (in thousands):
|
| Quoted Prices |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| in Active |
|
| Significant |
|
|
|
|
|
|
|
|
| ||
|
| Markets for |
|
| Other |
|
| Significant |
|
|
|
|
| |||
|
| Identical |
|
| Observable |
|
| Unobservable |
|
|
|
|
| |||
|
| Assets |
|
| Inputs |
|
| Inputs |
|
|
|
|
| |||
|
| (Level 1) |
|
| (Level 2) |
|
| (Level 3) |
|
| Total |
| ||||
Commodity futures – financial liabilities, net |
| $ | ( | ) |
| $ |
|
| $ |
|
| $ | ( | ) | ||
Contingent consideration for business combination - financial liability |
| $ |
|
| $ |
|
| $ | ( | ) |
| $ | ( | ) | ||
Total |
| $ | ( | ) |
| $ |
|
| $ | ( | ) |
| $ | ( | ) | |
At September 30, 2026 and March 31, 2026, the Company did not have any fair value measurements on a non-recurring basis.
14
Table of Contents
NOTE 11 — SEGMENT INFORMATION
The Company is engaged in the metals processing, pipe manufacturing, and metals and pipe distribution business. Within the Company, there are two product groups: flat-roll and tubular. The Company’s flat-roll operations consist primarily of converting carbon steel, stainless steel and aluminum flat-roll products into sheet, plate or slit coil. Through its tubular operations, the Company purchases, processes, manufactures and markets tubular products.
Segment results are reviewed regularly by the Company’s Chief Operating Decision Makers (“CODMs”). The Company’s CODMs are comprised of the Chief Executive Officer and the Chief Financial Officer. The CODMs assess segment performance and allocate resources based on a number of factors with the most emphasis placed on earnings from operations.
The following is a summary of significant financial information relating to the product groups (in thousands):
|
| Three Months Ended September 30, 2026 |
| |||||||||||||
|
| Flat-roll |
|
| Tubular |
|
| Other |
|
| Total |
| ||||
Net sales |
| $ |
|
| $ |
|
|
|
|
|
| $ |
| |||
Cost and expenses: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cost of materials sold |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Processing and warehousing expense |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Delivery expense |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Commercial expense |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Depreciation and amortization |
|
|
|
|
|
|
|
|
|
|
|
| ||||
General corporate expenses |
|
| — |
|
|
| — |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
EARNINGS (LOSS) FROM OPERATIONS |
|
|
|
|
|
|
|
| ( | ) |
|
|
| |||
Loss on economic hedges of risk |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ( | ) |
Interest expense |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ( | ) |
Other income |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
EARNINGS BEFORE INCOME TAXES |
|
|
|
|
|
|
|
|
|
|
|
|
| $ |
| |
|
| Six Months Ended September 30, 2026 |
| |||||||||||||
|
| Flat-roll |
|
| Tubular |
|
| Other |
|
| Total |
| ||||
Net sales |
| $ |
|
| $ |
|
|
|
|
|
| $ |
| |||
Cost and expenses: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cost of materials sold |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Processing and warehousing expense |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Delivery expense |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Commercial expense |
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Depreciation and amortization |
|
|
|
|
|
|
|
|
|
|
|
| ||||
General corporate expenses |
|
| — |
|
|
| — |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
EARNINGS (LOSS) FROM OPERATIONS |
|
|
|
|
|
|
|
| ( | ) |
|
|
| |||
Loss on economic hedges of risk |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ( | ) |
Interest expense |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ( | ) |
Other expense |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ( | ) |
EARNINGS BEFORE INCOME TAXES |
|
|
|
|
|
|
|
|
|
|
|
|
| $ |
| |
15
Table of Contents
|
| Three Months Ended September 30, 2025 |
| |||||||||||||
|
| Flat-roll |
|
| Tubular |
|
| Other |
|
| Total |
| ||||
Net sales |
| $ |
|
| $ |
|
|
| — |
|
| $ |
| |||
Cost and expenses: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cost of materials sold |
|
|
|
|
|
|
|
| — |
|
|
|
| |||
Processing and warehousing expense |
|
|
|
|
|
|
|
| — |
|
|
|
| |||
Delivery expense |
|
|
|
|
|
|
|
| — |
|
|
|
| |||
Commercial expense |
|
|
|
|
|
|
|
| — |
|
|
|
| |||
Depreciation and amortization |
|
|
|
|
|
|
|
|
|
|
|
| ||||
General corporate expenses |
|
| — |
|
|
| — |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
EARNINGS (LOSS) FROM OPERATIONS |
|
|
|
|
|
|
|
| ( | ) |
|
|
| |||
Gain on economic hedges of risk |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Interest expense |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ( | ) |
Other income |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
EARNINGS BEFORE INCOME TAXES |
|
|
|
|
|
|
|
|
|
|
|
|
| $ |
| |
|
| Six Months Ended September 30, 2025 |
| |||||||||||||
|
| Flat-roll |
|
| Tubular |
|
| Other |
|
| Total |
| ||||
Net sales |
|
$
|
|
|
|
$
|
|
|
|
|
—
|
|
|
$
|
|
|
Cost and expenses: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cost of materials sold |
|
|
|
|
|
|
|
|
|
|
—
|
|
|
|
|
|
Processing and warehousing expense |
|
|
|
|
|
|
|
|
|
|
—
|
|
|
|
|
|
Delivery expense |
|
|
|
|
|
|
|
|
|
|
—
|
|
|
|
|
|
Commercial expense |
|
|
|
|
|
|
|
|
|
|
—
|
|
|
|
|
|
Depreciation and amortization |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
General corporate expenses |
|
| — |
|
|
| — |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EARNINGS (LOSS) FROM OPERATIONS |
|
|
|
|
|
|
|
|
|
|
( |
)
|
|
|
|
|
Gain on economic hedges of risk |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Interest expense |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
( |
)
|
Other income |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EARNINGS BEFORE INCOME TAXES |
|
|
|
|
|
|
|
|
|
|
|
|
|
$
|
|
|
16
Table of Contents
|
| September 30, 2026 |
|
| March 31, 2026 |
| ||
IDENTIFIABLE ASSETS: |
|
|
|
|
|
|
|
|
Flat-Roll |
| $ |
|
| $ |
| ||
Tubular |
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
General corporate assets |
|
|
|
|
|
| ||
|
| $ |
|
| $ |
| ||
General corporate expenses reflect general and administrative expenses not directly associated with segment operations and consist primarily of payroll expenses related to corporate functions, professional fees and services, retirement plan contribution expense, corporate insurance expenses, restricted stock plan compensation expense and administrative office expenses. At September 30, 2026 and March 31, 2026, corporate assets consist primarily of cash, restricted cash, leased administrative office right-of-use assets, unamortized debt issuance costs and the cash value of officers’ life insurance. Although inventory is transferred at cost between product groups, there are no sales between product groups.
NOTE 12 — REVENUE
Revenue is generated primarily from contracts to manufacture or process metal products. Most of the Company’s revenue is generated by sales of material out of the Company’s inventory but a portion of the Company’s revenue is derived from processing or storage of customer owned material. Generally, the Company’s performance obligations are satisfied, control of our products is transferred, and revenue is recognized at a single point in time, when title transfers to our customer for product shipped or when services are provided. Revenues are recorded net of any sales incentives. Shipping and other transportation costs charged to customers are treated as fulfillment activities and are recorded in both revenue and cost of sales at the time control is transferred to the customer. Costs related to obtaining sales contracts are incidental and expensed when incurred. Because customers are invoiced at the time title transfers and the Company’s rights to consideration are unconditional at that time, the Company does not maintain contract asset balances. Additionally, the Company does not maintain contract liability balances, as performance obligations are satisfied prior to customer payment for product. The Company offers industry standard payment terms.
The Company has two reportable segments: Flat-Roll and Tubular. Flat-roll primarily generates revenue from cutting to length or slitting flat-roll metals. Flat-roll segment revenue consists of two product types: Company Owned Flat-Roll Products and Processing or Storage of Customer Owned Coil. Tubular primarily generates revenue from selling steel pipe it has manufactured resulting in a single product type: Manufactured Pipe.
The following table disaggregates our revenue by product for each of our reportable business segments for the three and six months ended September 30, 2026 and 2025, respectively (in thousands):
| | Three Months Ended | | | Six Months Ended | | ||||||||||
| | September 30, | | | September 30, | | ||||||||||
| | 2026 | | | 2025 | | | 2026 | | | 2025 | | ||||
Flat-Roll Segment: | | | | | | | | | | | | | | | | |
Company Owned Flat-Roll Products | | $ | | | $ | | | | | | | | ||||
Processing or Storage of Customer Owned Coil | | | | | | | | | | | | | ||||
| | $ | 266,565 | | | $ | 143,340 | | | | 488,318 | | | | 267,407 | |
Tubular Segment: | | | | | | | | | | | | | | | | |
Manufactured Pipe | | $ | | | $ | | | | | | | | ||||
| | $ | 20,241 | | | $ | 9,043 | | | | 38,459 | | | | 19,753 | |
17
Table of Contents
NOTE 13 — STOCKHOLDERS’ EQUITY
The following tables reflect the changes in stockholders’ equity for each of the six months ended September 30, 2026 and September 30, 2025 (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Additional |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Common |
|
| Paid-In |
|
| Treasury |
|
| Retained |
|
|
|
|
| ||||
|
| Stock |
|
| Capital |
|
| Stock |
|
| Earnings |
|
| Total |
| |||||
BALANCE AT MARCH 31, 2026 |
| $ |
|
| $ |
|
| $ | ( | ) |
| $ |
|
| $ |
| ||||
Net earnings |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Paid in capital – restricted stock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Issuance of restricted stock |
|
|
|
|
| ( | ) |
|
|
|
|
|
|
|
|
| ||||
Repurchase of shares |
|
|
|
|
|
|
|
| ( | ) |
|
|
|
|
| ( | ) | |||
Cash dividends ($0.04 per share) |
|
|
|
|
|
|
|
|
|
|
| ( | ) |
|
| ( | ) | |||
BALANCE AT JUNE 30, 2026 |
| $ |
|
| $ |
|
| $ | ( | ) |
| $ |
|
| $ |
| ||||
Net earnings |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Paid in capital – restricted stock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Cash dividends ($0.04 per share) |
|
|
|
|
|
|
|
|
|
|
| ( | ) |
|
| ( | ) | |||
BALANCE AT SEPTEMBER 30, 2026 |
| $ |
|
| $ |
|
| $ | ( | ) |
| $ |
|
| $ |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Additional |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Common |
|
| Paid-In |
|
| Treasury |
|
| Retained |
|
|
|
|
| ||||
|
| Stock |
|
| Capital |
|
| Stock |
|
| Earnings |
|
| Total |
| |||||
BALANCE AT MARCH 31, 2025 |
| $ |
|
| $ |
|
| $ | ( | ) |
| $ |
|
| $ |
| ||||
Net earnings |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Paid in capital – restricted stock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Issuance of restricted stock |
|
|
|
|
| ( | ) |
|
|
|
|
|
|
|
|
| ||||
Repurchase of shares |
|
|
|
|
|
|
|
| ( | ) |
|
|
|
|
| ( | ) | |||
Cash dividends ($0.04 per share) |
|
|
|
|
|
|
|
|
|
|
| ( | ) |
|
| ( | ) | |||
BALANCE AT JUNE 30, 2025 |
| $ |
|
| $ |
|
| $ | ( | ) |
| $ |
|
| $ |
| ||||
Net earnings |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Paid in capital – restricted stock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Cash dividends ($0.04 per share) |
|
|
|
|
|
|
|
|
|
|
| ( | ) |
|
| ( | ) | |||
BALANCE AT SEPTEMBER 30, 2025 |
| $ |
|
| $ |
|
| $ | ( | ) |
| $ |
|
| $ |
| ||||
18
Table of Contents
NOTE 14 — EARNINGS PER SHARE
Basic and dilutive net earnings per share are computed based on the following information (in thousands, except for share data):
|
| Three Months Ended |
|
| Six Months Ended |
| ||||||||||
|
| September 30, |
|
| September 30, |
| ||||||||||
|
| 2026 |
|
| 2025 |
|
| 2026 |
|
| 2025 |
| ||||
Numerator (basic and diluted) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net earnings |
| $ |
|
| $ |
|
| $ |
|
| $ |
| ||||
Less: Allocation to unvested restricted stock awards |
|
|
|
|
|
|
|
|
|
|
|
| ||||
Net earnings attributable to common shareholders |
| $ |
|
| $ |
|
| $ |
|
| $ |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Denominator (basic and diluted) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Weighted average common shares outstanding |
|
|
|
|
|
|
|
|
|
|
|
| ||||
For the six months ended September 30, 2026 and 2025, the Company allocated dividends and undistributed earnings to the unvested restricted stock awards.
As the restricted stock qualifies as participating securities, the following restricted stock awards were not included in the computation of weighted average diluted common shares outstanding under the two-class method:
| | Three Months Ended | | | Six Months Ended | | ||||||||||
| | September 30, | | | September 30, | | ||||||||||
| | 2026 | | | 2025 | | | 2026 | | | 2025 | | ||||
Restricted Stock Awards | | | | | | | | | | | | | ||||
NOTE 15 — SUPPLEMENTAL CASH FLOW INFORMATION
The Company paid interest of approximately $
NOTE 16 — INCOME TAXES
For the six months ended September 30, 2026 and 2025, the Company recorded income tax provisions of approximately $
19
Table of Contents
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
Overview
Friedman Industries, Incorporated is a manufacturer and processor of metals and operates in two reportable segments: flat-roll products and tubular products.
The flat-roll product segment consists of flat-roll processing facilities located in Hickman, Arkansas; Decatur, Alabama; Miami, Florida; East Chicago, Indiana; Granite City, Illinois and Sinton, Texas and a flat-roll distribution facility located in Orlando, Florida. The Hickman, Granite City and East Chicago facilities operate temper mills and cut-to-length lines. The Decatur and Sinton facilities operate stretcher leveler cut-to-length lines. The Miami facility operates a corrective leveling cut-to-length line and a coil slitting line. The processing equipment improves the quality of the material and cuts the material into sheet, plate or slit coil. On a combined basis, the facilities are capable of cutting sheet and plate with thicknesses ranging from 30 gauge to 1” thick in widths ranging from 11” wide to 96” wide. The flat-roll segment is able to produce slit coil with thickness ranging from 32 gauge to 10 gauge in widths ranging from 1/2" wide to 60" wide. The vast majority of flat-roll product segment revenue is generated from sales of Company owned inventory but the segment also generates revenue from the processing or storage of customer owned material on a fee basis.
The tubular product segment consists of the Company’s Friedman Tubular division located in Lone Star, Texas. The segment operates two electric resistance welded pipe mills with a combined outside diameter (“OD”) size range of 2 3/8” OD to 8 5/8” OD. Both pipe mills are American Petroleum Institute (“API”) licensed to manufacture line pipe and oil country pipe and also manufacture pipe for structural purposes that meets other recognized industry standards. All of the tubular segment's revenue is generated from sales of Company owned inventory.
Results of Operations
Six Months Ended September 30, 2026 Compared to Six Months Ended September 30, 2025
During the six months ended September 30, 2026 (the “2026 period”), sales, cost of materials sold and adjusted gross profit increased approximately $239.6 million, $164.3 million and $75.4 million, respectively, compared to the amounts recorded during the six months ended September 30, 2025 (the “2025 period”). Adjusted gross profit is a non-GAAP measure calculated as sales minus cost of materials sold. The increase in sales was due to an increase in the average selling price per ton and an increase in sales volume. Sales volume for the 2026 period consisted of approximately 388,000 tons from inventory and another 37,500 tons of toll processing customer owned material compared to the 2025 period volume consisting of approximately 296,500 tons from inventory and 43,500 tons of toll processing. The Company's legacy facilities demonstrated substantial year-over-year growth, generating approximately 64,000 additional tons of sales volume independent of the Century Metals & Supplies acquisition. This growth was complemented by approximately 21,500 tons of incremental volume attributable to Century, which contributed a full six months of operations in the 2026 period compared to only September in the 2025 period. Adjusted gross profit was approximately $130.7 million for the 2026 period compared to approximately $55.4 million for the 2025 period. Adjusted gross profit as a percentage of sales was approximately 24.8% for the 2026 period compared to approximately 19.3% for the 2025 period.
The Company's operating results are influenced by fluctuations in market prices for metals, particularly hot-rolled steel coil ("HRC"), as the majority of the Company's revenue is generated from processing HRC and products derived from HRC. During the 2026 period, the Company benefited from a sustained upward trend in HRC prices. Market prices increased approximately 28% between the end of the 2025 period and the beginning of the 2026 period, followed by an additional increase of approximately 22% during the 2026 period. This upward pricing trend, combined with solid demand and constrained supply, contributed to substantial margin expansion during the 2026 period. In contrast, HRC prices were near a cyclical peak at the beginning of the 2025 period and remained relatively stable before declining modestly toward the end of the period. These market conditions supported favorable margins early in the 2025 period, followed by margin compression as the period progressed. The benefit of the favorable pricing environment during the 2026 period was partially offset by hedging-related charges, including approximately $10.5 million of unrealized mark-to-market charges associated with open derivative positions intended to mitigate the Company's exposure to future fluctuations in metals prices.
20
Table of Contents
Flat-roll Segment
Flat-roll product segment sales for the 2026 period totaled approximately $488.3 million compared to approximately $267.4 million for the 2025 period. For a more complete understanding of the average selling prices of goods sold, it is helpful to exclude any sales generated from processing or storage of customer owned material. Sales generated from processing or storage of customer owned material totaled approximately $2.6 million for the 2026 period and $2.9 million for the 2025 period. Sales generated from flat-roll segment inventory totaled approximately $485.7 million for the 2026 period compared to approximately $264.5 million for the 2025 period. The average per ton selling price related to these shipments increased from approximately $946 per ton in the 2025 period to approximately $1,347 per ton in the 2026 period. Sales volume for the 2026 period consisted of approximately 360,500 tons from inventory and another 37,500 tons of toll processing customer owned material compared to the 2025 period volume consisting of approximately 280,000 tons from inventory and 43,500 tons of toll processing. The increase in sales volume for the 2026 period was related to a combination of stronger demand among some customers, successful commercial efforts to increase capacity utilization and the acquisition of Century. Flat-roll segment operations recorded earnings from operations of approximately $65.5 million and $14.5 million for the 2026 period and 2025 period, respectively.
The Company’s flat-roll segment purchases its inventory from a limited number of suppliers. Loss of any of these suppliers could have a material adverse effect on the Company’s business.
Tubular Segment
Tubular product segment sales for the 2026 period totaled approximately $38.5 million compared to approximately $19.8 million for the 2025 period. Sales increased due to a combination of sales volume growth and an increase in the average selling price per ton. Tons sold increased from approximately 16,500 tons in the 2025 period to approximately 27,500 tons in the 2026 period. The average per ton selling price increased from approximately $1,196 per ton for the 2025 period to approximately $1,398 per ton for the 2026 period. The tubular segment recorded earnings from operations of approximately $4.5 million and $2.2 million for the 2026 period and 2025 period, respectively.
The tubular segment purchases its inventory from a limited number of suppliers. Loss of any of these suppliers could have a material adverse effect on the Company’s business.
General, Selling and Administrative Costs
During the 2026 period, selling, general and administrative costs increased approximately $10.6 million compared to the 2025 period. This increase was primarily driven by profit-based and volume-based incentive compensation being approximately $6.6 million higher for the 2026 period combined with approximately $3.1 million of additional ongoing expenses related to the operation of Century. The remaining increase was primarily attributable to an increase in personnel to support sales growth and execution of our strategic initiatives.
Income Taxes
Income taxes increased from a provision for the 2025 period of approximately $2.4 million to a provision for the 2026 period of approximately $9.2 million. This increase was primarily related to increased earnings before taxes for the 2026 period. The income tax provision as a percentage of earnings before tax was approximately 24.5% for both the 2026 period and 2025 period. For both periods, the effective tax rate differed from the federal statutory rate due primarily to the inclusion of state tax expenses in the provision.
21
Table of Contents
Three Months Ended September 30, 2026 Compared to Three Months Ended September 30, 2025
During the three months ended September 30, 2026 (the “2026 quarter”), sales, cost of materials sold and adjusted gross profit increased approximately $134.4 million, $85.7 million and $48.7 million, respectively, compared to the amounts recorded during the three months ended September 30, 2025 (the “2025 quarter”). Adjusted gross profit is a non-GAAP measure calculated as sales minus cost of materials sold. The increase in sales was due to an increase in the average selling price per ton and an increase in sales volume. Sales volume for the 2026 quarter consisted of approximately 199,500 tons from inventory and another 20,000 tons of toll processing customer owned material compared to the 2025 quarter volume consisting of approximately 154,500 tons from inventory and 24,500 tons of toll processing. The Company's legacy facilities generated approximately 31,000 additional tons of sales volume, accounting for approximately 77% of the year-over-year increase. This growth was complemented by approximately 9,000 tons of incremental volume attributable to Century Metals & Supplies, which contributed three months of operations in the 2026 quarter compared to only one month in the 2025 quarter. Adjusted gross profit was approximately $75.0 million for the 2026 quarter compared to approximately $26.3 million for the 2025 quarter. Adjusted gross profit as a percentage of sales was approximately 26.1% for the 2026 quarter compared to approximately 17.3% for the 2025 quarter.
The Company's operating results are influenced by fluctuations in market prices for metals, particularly hot-rolled steel coil ("HRC"), as the majority of the Company's revenue is generated from processing HRC and products derived from HRC. During the 2026 quarter, the Company benefited from the continued upward trend in HRC prices. This favorable pricing environment, combined with solid demand and constrained supply, contributed to substantial margin expansion during the 2026 quarter. In contrast, declining HRC prices during the 2025 quarter contributed to compressed physical margins. The benefit of the favorable pricing environment during the 2026 quarter was partially offset by hedging-related charges, including approximately $9.8 million of unrealized mark-to-market charges associated with open derivative positions intended to mitigate the Company's exposure to future fluctuations in metals prices.
Flat-roll Segment
Flat-roll product segment sales for the 2026 quarter totaled approximately $266.6 million compared to approximately $143.3 million for the 2025 quarter. For a more complete understanding of the average selling prices of goods sold, it is helpful to exclude any sales generated from processing or storage of customer owned material. Sales generated from processing or storage of customer owned material totaled approximately $1.5 million for the 2026 quarter and approximately $1.6 million for the 2025 quarter. Sales generated from flat-roll segment inventory totaled approximately $265.1 million for the 2026 quarter compared to approximately $141.7 million for the 2025 quarter. The average per ton selling price related to these shipments increased from approximately $963 per ton in the 2025 quarter to approximately $1,430 per ton in the 2026 quarter. Sales volume for the 2026 quarter consisted of approximately 185,500 tons from inventory and another 20,000 tons of toll processing customer owned material compared to the 2025 quarter volume consisting of approximately 147,000 tons from inventory and 24,500 tons of toll processing. The increase in sales volume for the 2026 quarter was related to a combination of stronger demand among some customers, successful commercial efforts to increase capacity utilization and the acquisition of Century. Flat-roll segment operations recorded earnings from operations of approximately $40.7 million and $5.7 million for the 2026 quarter and 2025 quarter, respectively.
The Company’s flat-roll segment purchases its inventory from a limited number of suppliers. Loss of any of these suppliers could have a material adverse effect on the Company’s business.
Tubular Segment
Tubular product segment sales for the 2026 quarter totaled approximately $20.2 million compared to approximately $9.0 million for the 2025 quarter. Sales increased due to a combination of sales volume growth and an increase in the average selling price per ton. Tons sold increased from approximately 7,500 tons in the 2025 quarter to approximately 14,000 tons in the 2026 quarter. The average per ton selling price increased from approximately $1,185 per ton for the 2025 quarter to approximately $1,454 per ton for the 2026 quarter. The tubular segment recorded earnings from operations of approximately $2.3 million and $0.9 million for the 2026 quarter and 2025 quarter, respectively.
The tubular segment purchases its inventory from a limited number of suppliers. Loss of any of these suppliers could have a material adverse effect on the Company’s business.
22
Table of Contents
General, Selling and Administrative Costs
During the 2026 quarter, selling, general and administrative costs increased approximately $5.3 million compared to the 2025 quarter. This increase was primarily driven by profit-based and volume-based incentive compensation being approximately $3.7 million higher for the 2026 quarter combined with approximately $1.4 million of additional ongoing expenses related to the operation of Century. The remaining increase was primarily attributable to an increase in personnel to support sales growth and execution of our strategic initiatives.
Income Taxes
Income taxes increased from a provision for the 2025 quarter of approximately $0.7 million to a provision for the 2026 quarter of approximately $5.0 million. This increase was primarily related to increased earnings before taxes for the 2026 quarter. The income tax provision as a percentage of earnings before tax was approximately 24.3% and 24.8% for the 2026 quarter and 2025 quarter, respectively. For both quarters, the effective tax rate differed from the federal statutory rate due primarily to the inclusion of state tax expenses in the provision.
Non-GAAP Information
The non-GAAP measure adjusted gross profit is used in this Management's Discussion and Analysis. Adjusted gross profit is calculated as sales minus cost of materials sold. Cost of materials sold is a discrete line on our statements of operations and represents the cost associated with purchased metals, inbound freight, transfer freight and certain external processing costs. To provide financial statement users with a better understanding of the Company's expenses, cost of sales is disaggregated on our statements of operations into the line items cost of materials sold, processing and warehousing expense, delivery expense and depreciation and amortization. The Company believes adjusted gross profit is a meaningful measure because our cost structure and operating results are significantly impacted by the fluctuating costs associated with purchased metals.
The following table reconciles the GAAP measure for gross profit to the non-GAAP measure adjusted gross profit (in thousands):
|
|
THREE MONTHS ENDED |
|
|
SIX MONTHS ENDED |
|
||||||||||
|
|
SEPTEMBER 30, |
|
|
SEPTEMBER 30, |
|
||||||||||
|
|
2026 |
|
|
2025 |
|
|
2026 |
|
|
2025 |
|
||||
Gross profit (GAAP measure) |
|
$ |
48,114 |
|
|
$ |
9,166 |
|
|
$ |
79,985 |
|
|
$ |
21,664 |
|
Processing and warehousing expense |
|
|
14,231 |
|
|
|
9,064 |
|
|
|
27,658 |
|
|
|
18,392 |
|
Delivery expense |
|
|
11,581 |
|
|
|
7,134 |
|
|
|
20,966 |
|
|
|
13,534 |
|
Depreciation and amortization |
|
|
1,057 |
|
|
|
937 |
|
|
|
2,126 |
|
|
|
1,784 |
|
Adjusted gross profit (non-GAAP measure presented) |
|
$ |
74,983 |
|
|
$ |
26,301 |
|
|
$ |
130,735 |
|
|
$ |
55,374 |
|
23
Table of Contents
FINANCIAL POSITION, LIQUIDITY AND CAPITAL RESOURCES
The Company’s current ratio was 2.7 at September 30, 2026 and 3.4 at March 31, 2026. Working capital was approximately $213.5 million at September 30, 2026 and $180.9 million at March 31, 2026.
During the six months ended September 30, 2026, the Company maintained assets and liabilities at levels it believed were commensurate with operations. Changes in balance sheet amounts occurred in the ordinary course of business. Accounts receivable, inventories and accounts payable increased primarily due to a combination of sales volume growth and higher metals prices. Cash and restricted cash increased due to cash provided by operating and financing activities, partially offset by cash used in investing activities, primarily for capital expenditures. The Company expects to continue to monitor, evaluate and manage balance sheet components depending on changes in market conditions and the Company’s operations.
The Company has a $200 million asset-based lending facility ("ABL Facility") led by JPMorgan Chase Bank, N.A. with Wells Fargo Bank, N.A. as a 40% syndicated participant. The ABL Facility matures on August 29, 2030 and is secured by substantially all of the assets of the Company. The Company can elect borrowings on a floating rate basis or a term basis. Floating rate borrowings accrue interest at a rate equal to the prime rate minus 1.45% per annum. Term rate borrowings accrue interest at a rate equal to the SOFR rate applicable to the selected term plus 1.65% per annum. Availability of funds under the ABL Facility is subject to a borrowing base calculation determined as the sum of (a) 90% of eligible accounts receivable, plus (b) the product of 85% multiplied by the net orderly liquidating value percentage identified in the most recent inventory appraisal multiplied by eligible inventory. The ABL Facility contains a springing financial covenant whereby the financial covenant is only tested when availability falls below the greater of 10% of the revolving commitment or $20 million. The financial covenant restricts the Company from allowing its fixed charge coverage ratio to be, as of the end of any calendar month, less than 1.00 to 1.00 for the trailing twelve-month period then ending. The fixed charge coverage ratio is calculated as the ratio of (a) EBITDA, as defined in the ABL Facility, minus unfinanced capital expenditures to (b) cash interest expense plus scheduled principal payments on indebtedness plus taxes paid in cash plus restricted payments paid in cash plus capital lease obligation payments plus cash contributions to any employee pension benefit plans. The ABL Facility contains other representations and warranties and affirmative and negative covenants that are usual and customary. If certain conditions precedent are satisfied, the ABL Facility may be increased up to an aggregate of $75 million, in minimum increments of $5 million. At September 30, 2026, the Company had a balance of approximately $101.7 million under the ABL Facility with an applicable interest rate of 5.55% and the Company's borrowing base supported full access to the ABL Facility.
The Company believes that its current cash position along with cash flows from operations and borrowing capability due to its financial position are adequate to fund its expected cash requirements for the next 12 months.
HEDGING ACTIVITIES
The Company utilizes hot-rolled coil futures, options and swaps to manage price risk on unsold inventory and longer-term fixed price sales agreements. The Company has elected hedge accounting for some of its hedging activities previously but most recently the Company has classified its hedging activities as economic hedges of risk with mark-to-market ("MTM") accounting treatment. Hedging decisions are intended to protect the value of the Company's inventory and produce more consistent financial results over price cycles. The Company recognized a hedging related charge of approximately $17.4 million during the six months ended September 30, 2026 which includes approximately $10.5 million of unrealized mark-to-market charges associated with open derivative positions intended to manage future metals price exposure. In comparison, the Company recognized a gain of approximately $1.1 million during the six months ended September 30, 2025 related to hedging activities. For the three months ended September 30, 2026, the Company recognized a hedging related charge of approximately $14.6 million, including approximately $9.8 million of unrealized mark-to-market charges. In comparison, the Company recognized a hedging-related gain of approximately $0.9 million for the three months ended September 30, 2025. Because changes in the fair value of these derivative positions are recognized in current earnings, hedging-related gains and charges may be recognized in different reporting periods than the corresponding effects of metals price movements on the Company's physical margins. See Note 9 for additional information related to the Company's hedging activities.
CRITICAL ACCOUNTING ESTIMATES
The preparation of financial statements in conformity with U.S. generally accepted accounting principles may require management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. The determination of fair values related to the Century Metals & Supplies business combination accounting involves significant estimates and judgments in the valuation process. Actual results could differ from any estimates.
24
Table of Contents
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS
From time to time, the Company may make certain statements that contain forward-looking information (as defined in the Private Securities Litigation Reform Act of 1996, as amended) and that involve risk and uncertainty. Such statements may include those risks disclosed in the Management’s Discussion and Analysis of Financial Condition and Results of Operations section of this report, including the adequacy of cash and expectations as to future sales, prices and margins. These forward-looking statements may include, but are not limited to, future changes in the Company’s financial condition or results of operations, future production capacity, product quality and proposed expansion plans. Forward-looking statements may be made by management orally or in writing including, but not limited to, this Management’s Discussion and Analysis of Financial Condition and Results of Operations and other sections of the Company’s filings with the U.S. Securities and Exchange Commission (the “SEC”) under the Securities Act of 1933, as amended, and the Securities Exchange Act of 1934, as amended (the “Exchange Act”), including the Company’s Annual Report on Form 10-K and its other Quarterly Reports on Form 10-Q. Forward-looking statements include those preceded by, followed by or including the words “will,” “expect,” “intended,” “anticipated,” “believe,” “project,” “forecast,” “propose,” “plan,” “estimate,” “enable,” and similar expressions, including, for example, statements about our business strategy, our industry, our future profitability, growth in the industry sectors we serve, our expectations, beliefs, plans, strategies, objectives, prospects and assumptions, and estimates and projections of future activity. These forward-looking statements are not guarantees of future performance. These statements are based on management’s expectations that involve a number of business risks and uncertainties, any of which could cause actual results to differ materially from those expressed in or implied by the forward-looking statements. Although forward-looking statements reflect our current beliefs, reliance should not be placed on forward-looking statements because they involve known and unknown risks, uncertainties and other factors, which may cause our actual results, performance or achievements to differ materially from anticipated future results, performance or achievements expressed or implied by such forward-looking statements. Actual results and trends in the future may differ materially depending on a variety of factors including, but not limited to, changes in the demand for and prices of the Company’s products, changes in government policy regarding steel, changes in the demand for steel and steel products in general and the Company’s success in executing its internal operating plans, changes in and availability of raw materials, unplanned shutdowns of our production facilities due to equipment failures or other issues, increased competition from alternative materials and risks concerning innovation, new technologies, products and increasing customer requirements. Accordingly, undue reliance should not be placed on our forward-looking statements. We undertake no obligation to publicly update or revise any forward-looking statement, whether as a result of new information, future events, changed circumstances or otherwise, except to the extent law requires.
Item 3. Quantitative and Qualitative Disclosures About Market Risk
Not required.
Item 4. Controls and Procedures
Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rule 13a-15(f) and 15d-15(f) promulgated under the Securities Exchange Act of 1934, as amended). We have established disclosure controls and procedures designed to ensure that material information required to be disclosed in our reports filed under the Exchange Act is recorded, processed, summarized and reported within the time periods specified by the Securities and Exchange Commission and that any material information relating to us is recorded, processed, summarized and reported to our management including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosures. In designing and evaluating our disclosure controls and procedures, our management recognizes that controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving desired control objectives. In reaching a reasonable level of assurance, our management necessarily was required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures. As required by Rule 13a-15(b) under the Exchange Act, we have evaluated, under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, the effectiveness of the design and operation of our disclosure controls and procedures (as defined in rules 13a-15(e) and 15d-15(e) under the Exchange Act) as of the end of the period covered by this quarterly report. Based on this evaluation, the Company’s CEO and principal financial officer have concluded that the Company’s disclosure controls and procedures were effective as of the end of the fiscal quarter ended September 30, 2026 to ensure that information that is required to be disclosed by the Company in the reports it files or submits under the Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and (ii) accumulated and communicated to the Company’s management, including the CEO and principal financial officer, as appropriate, to allow timely decisions regarding required disclosure.
There were no changes in the Company’s internal control over financial reporting that occurred during the fiscal quarter ended September 30, 2026 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.
25
Table of Contents
FRIEDMAN INDUSTRIES, INCORPORATED
Part II — OTHER INFORMATION
Item 2. Issuer Purchases of Equity Securities
The Company repurchases shares of its common stock from time to time pursuant to its publicly announced share repurchase program. The following table provides information regarding purchases of the Company's common stock during the three months ended September 30, 2026, including shares withheld to satisfy employees' tax withholding obligations in connection with the vesting of restricted stock awards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total Number of Shares |
|
Maximum Number of |
|
|
|
|
|
|
|
|
Purchased as Part of |
|
Shares That |
|
|
|
Total Number of Shares |
|
|
Average Price Paid |
|
Publicly Announced |
|
May Yet Be Purchased |
|
Period |
|
Purchased |
|
|
per Share |
|
Programs |
|
Under the Programs |
|
| July 1, 2026 - July 31, 2026 |
|
— |
|
$ | — |
|
— |
|
1,041,444 |
|
| August 1, 2026 - August 31, 2026 |
|
— |
|
|
— |
|
— |
|
1,041,444 |
|
| September 1, 2026 - September 30, 2026 |
|
— |
|
|
— |
|
— |
|
1,041,444 |
|
|
|
— |
|
$ |
— |
|
— |
|
1,041,444 |
|
There were no share purchases under a repurchase program or to satisfy employees' tax withholding obligations in connection with the vesting of restricted stock awards. On December 13, 2023, the Company's Board of Directors authorized a share repurchase program under which the Company may repurchase up to 1,045,774 shares of its common stock. As of September 30, 2026, 1,041,444 shares remained available for repurchase under the program. The program is scheduled to expire on December 13, 2026, unless modified, suspended, extended, or terminated earlier by the Board of Directors.
Item 5. Other Information
During the six months ended September 30, 2026, none of our officers or directors adopted, modified or terminated a “Rule 10b5-1 trading arrangement” or a “non-Rule 10b5-1 trading arrangement,” as each term is defined in Item 408(a) and (c), respectively, of Regulation S-K, for the purchase or sale of our securities.
26
Table of Contents
Item 6. Exhibits
Exhibits |
|
|
|
|
|
3.1 |
— |
Articles of Incorporation of the Company, as amended (incorporated by reference from Exhibit 3.1 to the Company’s Form S-8 filed on December 21, 2016). |
|
|
|
3.2 |
— |
Articles of Amendment to the Articles of Incorporation of the Company, as filed with the Texas Secretary of State on September 22, 1987 (incorporated by reference from Exhibit 3.1 to the Company’s Form S-8 filed on December 21, 2016). |
|
|
|
3.3 |
— |
Amended and Restated Bylaws of the Company, as amended on November 8, 2021. (incorporated by reference from Exhibit 3.3 to the Company's Form 10-Q filed on November 19, 2021). |
|
|
|
** 10.1 |
|
Seventh Amendment to Amended and Restated Credit Agreement |
|
|
|
** 31.1 |
— |
Certification Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, signed by Michael J. Taylor. |
|
|
|
** 31.2 |
— |
Certification Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, signed by Alex LaRue. |
|
|
|
** 32.1 |
— |
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, signed by Michael J. Taylor. |
|
|
|
** 32.2 |
— |
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, signed by Alex LaRue. |
|
|
|
**101.INS |
— |
Inline XBRL Instance Document. |
|
|
|
**101.SCH |
— |
Inline XBRL Taxonomy Schema Document. |
|
|
|
**101.CAL |
— |
Inline XBRL Calculation Linkbase Document. |
|
|
|
**101.DEF |
— |
Inline XBRL Definition Linkbase Document. |
|
|
|
**101.LAB |
— |
Inline XBRL Label Linkbase Document. |
|
|
|
**101.PRE |
— |
Inline XBRL Presentation Linkbase Document. |
|
|
|
|
**104
|
—
|
Cover Page Interactive File (formatted as Inline XBRL and contained in Exhibit 101)
|
|
|
|
|
** Filed herewith.
|
|
|
27
Table of Contents
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
|
|
FRIEDMAN INDUSTRIES, INCORPORATED |
||
|
|
|
|
|
Date: November 5, 2026 |
|
By |
/s/ ALEX LARUE |
|
|
|
|
Alex LaRue, Chief Financial Officer – Secretary and Treasurer (Principal Financial Officer) |
|
28