STOCK TITAN

Berto Acquisition agrees to merge with Ampera at ~$900M

Available on EDGAR Accepted by SEC EDGAR Learn about SEC filing dates
(High)

Sentiment and the balance of points

Rhea-AI Sentiment reads the wording of the document, how positive or negative its language is on a 1 to 5 scale. The balance of points shown with the takes weighs what the document actually discloses, so the two can disagree, for example when a trial that missed its main goal is described in upbeat language.

Form Type
8-K

Rhea-AI Filing Summary

Berto Acquisition Corp. (TACO) agreed to combine with Ampera, Inc. The proposed deal values Ampera at an approximately $900 million pre-money equity value. Berto would domesticate as a Delaware corporation before its merger subsidiary merges into Ampera; Ampera would survive as Berto’s wholly owned subsidiary. Berto is expected to take the Ampera, Inc. name, and the combined company is anticipated to list on Nasdaq as AMPR, subject to approval.

The parties agreed to an approximately $30 million PIPE in Class A shares priced at Berto’s redemption price. Ampera had closed or received commitments for over $10 million in pre-close equity and debt financing, bringing stated capital commitments to over $40 million. An additional $50 million to $100 million of PIPE capital remains under discussion without definitive agreements; the transaction is not conditioned on raising it. Closing is expected in the first quarter of 2027, subject to shareholder and regulatory approvals, listing approval and other conditions, including a minimum-cash condition requiring specified cash sources to equal or exceed PIPE proceeds funded at or before closing. The proposed Class A shares carry one vote each and Class B shares 20 votes each; Ampera’s founder and permitted transferees are expected to receive Class B.

Filing Explained

Ampera consent is in; Berto’s vote remains, while the plan allows up to ten percent initial share capacity and annual increases up to five percent.

The parties signed a proposed combination agreement; Ampera’s required stockholder consent has been delivered, but Berto shareholder approval, SEC effectiveness of the registration statement, listing approval and other closing conditions remain. The planned equity incentive plan would create potential share-issuance capacity: an initial reserve of up to 10% of PubCo Class A stock on a fully diluted basis, excluding converted options, plus annual increases of up to 5% of fully diluted common stock as determined by the board.

Those amounts are plan capacity, not shares already issued; issuing additional shares would increase the share count and reduce existing holders’ percentage ownership absent offsetting changes. Certain Berto shareholders and insiders, including the sponsor, have agreed to vote their shares for the deal and not transfer them until the merger closes, the agreement terminates, or the parties agree to end the support agreement; those commitments do not replace the required Berto shareholder approval.

Under a side letter, IonQ is to select one director immediately after closing and may nominate one director to board-recommended slates while it and its affiliates retain at least half of the number of voting securities IonQ holds immediately after closing; the nominee must be independent, unaffiliated with IonQ, and approved by Ampera. After closing, PubCo must file, at its own cost, a resale registration statement for certain holders’ shares within 30 calendar days; those holders also receive demand and piggyback registration rights.

Item 1.01 Entry into a Material Definitive Agreement Business
The company signed a significant contract such as a merger agreement, credit facility, or major partnership.
Item 3.02 Unregistered Sales of Equity Securities Securities
The company sold equity securities in a private placement or other unregistered transaction.
Item 7.01 Regulation FD Disclosure Disclosure
Material non-public information disclosed under Regulation Fair Disclosure, often investor presentations or guidance.
Item 9.01 Financial Statements and Exhibits Exhibits
Financial statements, pro forma financial information, or exhibit attachments filed with this report.
Pre-money equity value Approximately $900 million Proposed value assigned to Ampera.
PIPE investment Approximately $30 million Class A shares priced at Berto’s redemption price.
Pre-close equity and debt financing In excess of $10 million Ampera had closed or received commitments for this financing.
Total capital commitments In excess of $40 million Stated total to date, including the PIPE and Ampera’s existing investors.
Additional PIPE capital under discussion $50 million to $100 million No definitive agreements had been signed; the transaction is not conditioned on raising it.
Expected closing First quarter of 2027 Expected timing, subject to conditions and with no assurance of completion.
Voting rights per share 1 vote per Class A share; 20 votes per Class B share Proposed post-combination capital structure.
Domestication regulatory
"Berto will de-register in the Cayman Islands and domesticate as a Delaware corporation"
Domestication is the legal process by which a company changes its official ‘legal home’ from one place to another without creating a new business entity, similar to moving a household’s registration from one city to another while keeping the same people and possessions. It matters to investors because it can alter which laws, tax rules, reporting standards and shareholder rights apply, potentially affecting costs, governance and the value or liquidity of the company’s shares.
Aggregate Merger Consideration financial
"The “Aggregate Merger Consideration” to be issued to Ampera stockholders"
Consideration Ratio financial
"The “Consideration Ratio” is the number of shares of PubCo Common Stock"
Minimum Cash Condition financial
"the “Minimum Cash Condition”"
A minimum cash condition is a contract clause that requires a company to hold at least a specified amount of cash or liquid assets before a transaction can close or a financing can proceed. Investors care because it protects against deals being completed when the business lacks enough cash to operate or meet short-term obligations—think of it as a safety buffer like keeping a minimum balance in a bank account so you don’t bounce payments after a big purchase.
PIPE Investments financial
"the “PIPE Investments”"
supervoting rights regulatory
"shares of the combined company with supervoting rights"

FAQ

AI-generated questions and answers. How Rhea-AI works. Not financial advice.

What is the proposed TACO-Ampera transaction valued at?

The proposed transaction assigns Ampera an approximately $900 million pre-money equity value. The merger consideration is calculated using that equity value and Berto’s redemption price.

How much PIPE financing is included in the proposed TACO combination?

The subscription agreements cover approximately $30 million of Class A shares at a price equal to Berto’s redemption price. The PIPE investment obligations are subject to closing conditions, including listing approval and satisfaction or waiver of the business-combination conditions.

What conditions must be met before Berto’s merger with Ampera can close?

Closing is subject to shareholder approvals, an effective registration statement and listing approval, along with other conditions. The minimum-cash condition requires specified cash sources to equal or exceed proceeds from PIPE investments funded at or before closing.

How does Ampera plan to use proceeds from the proposed TACO transaction?

Ampera intends to use expected proceeds to fund platform development and initial commercial scale-up. The amount available to the combined company will depend in part on shareholder redemptions and the total financing raised.

What board rights does IonQ receive under the TACO-Ampera deal?

IonQ receives one director immediately following closing and a right to nominate one director for the board-recommended slate at later shareholder meetings. The nomination right continues while IonQ and its affiliates retain at least 50% of the Ampera voting securities IonQ held immediately after closing, subject to stated qualifications and approval requirements.

AI-generated analysis. How Rhea-AI works. Not financial advice.

See more from StockTitan in Google Search and AI answers. Adds StockTitan as a preferred source · opens Google
Add on Google
false 0002033122 0002033122 2026-11-17 2026-11-17 0002033122 TACOU:UnitsConsistingOfOneOrdinaryShare0.0001ParValueAndOnehalfOfOneRedeemableWarrantMember 2026-11-17 2026-11-17 0002033122 TACOU:OrdinarySharesParValue0.0001ParValueMember 2026-11-17 2026-11-17 0002033122 TACOU:WarrantsEntitlingTheHolderToPurchaseOneOrdinaryShareParValue0.0001PerShareMember 2026-11-17 2026-11-17 iso4217:USD xbrli:shares iso4217:USD xbrli:shares

 

 

 

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

 

FORM 8-K

 

CURRENT REPORT

 

PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934

 

Date of Report (Date of earliest event reported): November 17, 2026

 

 

 

BERTO ACQUISITION CORP.

(Exact name of registrant as specified in its charter)

 

 

 

Cayman Islands   001-42620   99-4250815
(State or other jurisdiction
of incorporation)
  (Commission
File Number)
  (IRS Employer
Identification No.)

 

1180 North Town Center Drive, Suite 100
Las Vegas, Nevada 89144

(Address of principal executive offices, including zip code)

 

Registrant’s telephone number, including area code: (702) 781-4313

 

Not Applicable
(Former name or former address, if changed since last report)

 

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class   Trading Symbol(s)   Name of each exchange on which registered
Units, each consisting of one ordinary share, $0.0001 par value, and one-half of one redeemable warrant   TACOU   The Nasdaq Stock Market LLC
Ordinary shares, par value $0.0001 per share   TACO   The Nasdaq Stock Market LLC
Warrants, each whole warrant exercisable for one ordinary share at an exercise price of $11.50 per share   TACOW   The Nasdaq Stock Market LLC

 

 

 

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:

 

☒ Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)
   
☐ Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)
   
☐ Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))
   
☐ Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

 

Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).

 

Emerging growth company ☒

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

 

 

 

 

 

 

Item 1.01 Entry into a Material Definitive Agreement.

 

Business Combination Agreement

 

On November 17, 2026, Berto Acquisition Corp., a Cayman Islands exempted company (together with its successors, including after the Domestication, “Berto”) entered into a Business Combination Agreement, dated as of November 17, 2026 (the “Business Combination Agreement”), by and among Berto, Ampera, Inc., a Delaware corporation (“Ampera”), and Berto Merger Sub, Inc., a Delaware corporation and a wholly-owned subsidiary of Berto (“Merger Sub”). The Business Combination Agreement provides, among other things, that on the terms and subject to the conditions set forth therein, (i) Berto will de-register in the Cayman Islands and transfer by way of continuation out of the Cayman Islands and into the State of Delaware so as to migrate to and domesticate as a Delaware corporation (the “Domestication”), and (ii) following the Domestication, Merger Sub will be merged with and into Ampera, as a result of which Ampera will be the surviving company and a wholly-owned subsidiary of Berto (the “Merger”). The Domestication, Merger, and other transactions contemplated by the Business Combination Agreement are collectively referred to as the “Business Combination”; and the consummation of the Merger is referred to as the “Closing” and the date of the Closing is referred to as the “Closing Date”. Capitalized terms used in this Current Report on Form 8-K but not otherwise defined herein have the meanings given to them in the Business Combination Agreement.

 

Ampera is a company engaged in the business of developing nuclear energy technologies, including fusion and fission capabilities, and related activities.

 

The Domestication

 

The Domestication is intended to occur on the day that is one Business Day prior to the Closing Date. Upon the Domestication, it is anticipated that Berto will change its name to “Ampera, Inc.” and is referred to herein as “PubCo” as of the time following the Domestication.

 

Immediately prior to the Domestication, (1) Berto will effect the redemption of Berto public shares validly submitted for redemption and not withdrawn (the “Redemption”), and (2) to the extent any Berto units remain outstanding and unseparated, each such unit will be automatically separated, with the holder of each such unit deemed to hold one Berto ordinary share, par value $0.0001 per share (a “Berto Ordinary Share”), and one-half of one redeemable warrant of Berto (a “Berto Warrant”). At the effective time of the Domestication, each then-outstanding Berto Ordinary Share (not including public shares validly submitted for redemption) will convert automatically into one share of Class A common stock, par value $0.0001 per share, of PubCo (the “PubCo Class A Common Stock”), and each then-outstanding whole Berto Warrant will convert automatically into one warrant of PubCo, on the same terms and conditions as the Berto Warrant from which it was converted, except that it will be exercisable for one share of PubCo Class A Common Stock in lieu of one Berto Ordinary Share.

 

The Merger

 

At the effective time of the Merger, each share of Ampera’s capital stock that is issued and outstanding immediately prior to the Merger (not including treasury shares and dissenting shares) will be automatically canceled and converted into the right to receive a number of shares of PubCo Common Stock equal to the Consideration Ratio (as defined below). Pursuant to the PubCo COI (as defined below), PubCo’s common stock will consist of two classes: PubCo Class A Common Stock, which will carry one vote per share and will be the class of stock publicly traded on the Stock Exchange (as defined below), and Class B common stock of PubCo (the “PubCo Class B Common Stock” and, together with the PubCo Class A Common Stock, the “PubCo Common Stock”), which will carry twenty votes per share. Ampera’s founder and his permitted transferees are expected to receive shares of PubCo Class B Common Stock in respect of their Ampera capital stock in the Merger, while all other Ampera stockholders are expected to receive shares of PubCo Class A Common Stock.

 

1

 

 

Additionally, at the effective time of the Merger, each outstanding Ampera stock option will become an option of PubCo containing the same terms, conditions, vesting and other provisions as are currently applicable to such Ampera stock options, provided that each option will be exercisable for the number of shares of PubCo Class A Common Stock equal to the Consideration Ratio multiplied by the number of shares of Ampera common stock subject to the option as of immediately prior to the effective time of the Merger, rounded down to the nearest whole share, at an exercise price equal to the per share exercise price of the Ampera option divided by the Consideration Ratio, rounded up to the nearest whole cent.

 

Consideration and Structure

 

The “Aggregate Merger Consideration” to be issued to Ampera stockholders in connection with the Merger will be determined by dividing (a) $900 million (the “Equity Value”) by (b) the price (the “Redemption Price”) at which each Berto Ordinary Share may be redeemed in connection with the Business Combination. The “Consideration Ratio” is the number of shares of PubCo Common Stock to be issued in exchange for issued and outstanding Ampera capital stock upon the effective time of the Merger, and is equal to the quotient obtained by dividing (x) the Aggregate Merger Consideration by (y) the Aggregate Fully Diluted Company Shares (as defined in the Business Combination Agreement). 

 

Representations, Warranties and Covenants

 

The parties to the Business Combination Agreement have agreed to customary representations and warranties for transactions of this type. In addition, the parties to the Business Combination Agreement agreed to be bound by certain customary covenants for transactions of this type, including, among others, covenants with respect to the conduct of Ampera and Berto during the period between execution of the Business Combination Agreement and the Closing. The Business Combination Agreement provides that Berto’s existing indemnification obligations under the Administrative Services and Indemnification Agreement, dated April 29, 2025, with the Sponsor will survive the Closing and become obligations of PubCo following the Domestication. PubCo and the surviving corporation will also assume specified existing indemnification obligations in accordance with the Business Combination Agreement. Each of the parties to the Business Combination Agreement has agreed to use its reasonable best efforts to cause all actions and things necessary to consummate and expeditiously implement the Business Combination. The representations, warranties, covenants and agreements of the parties made under the Business Combination Agreement will not survive the Closing except for the covenants and agreements contained therein that by their terms expressly apply in whole or in part at or after the Closing or in the case of claims against a person or entity in respect of such person’s or entity’s common law fraud.

 

Registration Statement / Proxy Statement

 

As promptly as reasonably practicable after receipt of information concerning Ampera and Ampera securityholders as is either required by the federal securities laws or reasonably requested by Berto for inclusion in a registration statement on Form S-4 relating to the Business Combination (the “Registration Statement”), to be prepared and filed with the SEC which will contain a proxy statement relating to a meeting of the Berto shareholders (the “Berto Shareholders Meeting”) to be held to consider, among other things, the (x) approval of the Domestication, (y) approval of the Business Combination (including the approval and adoption of the Business Combination Agreement and the Merger) and (z) the adoption and approval of certain other proposals the parties deem necessary to effectuate the Business Combination.

 

Conditions to Closing

 

Under the Business Combination Agreement, the obligations of the parties to consummate the Business Combination are subject to the satisfaction or waiver of certain customary closing conditions of the respective parties, including, without limitation: (i) the absence of specified adverse laws, rules, regulations, judgments, decrees, executive orders or awards making the Business Combination illegal or otherwise prohibiting its consummation; (ii) the Registration Statement having been declared effective by the Securities and Exchange Commission (“SEC”) under the Securities Act of 1933, as amended (the “Securities Act”), no stop order suspending the effectiveness of the Registration Statement being in effect, and no proceedings for purposes of suspending the effectiveness of the Registration Statement having been initiated or threatened in writing by the SEC; (iii) the approval and adoption of the Business Combination Agreement and transactions contemplated thereby by requisite vote of Berto shareholders (the “Berto Shareholder Approval”) and Ampera stockholders (the “Ampera Stockholder Approval”); (iv) the PubCo Class A Common Stock having been approved for listing on the Nasdaq Stock Market, the New York Stock Exchange or NYSE American, as applicable (the “Stock Exchange”), as set forth in the Business Combination Agreement; and (v) the size and composition of PubCo’s board of directors will be as set forth in the Business Combination Agreement.

 

2

 

 

The obligations of Berto and Merger Sub to consummate the Business Combination are further subject to additional conditions, including, among other things: (i) material compliance by Ampera with its agreements and covenants under the Business Combination Agreement; (ii) the truth and accuracy of the representations and warranties of Ampera, subject to customary bring-down standards; (iii) no Material Adverse Effect (as defined in the Business Combination Agreement) having occurred since the date of the Business Combination Agreement that is continuing; (iv) the termination of certain agreements among Ampera and its stockholders; and (v) the Required Company Consents (as defined in the Business Combination Agreement) having been obtained.

 

The obligations of Ampera to consummate the Business Combination are further subject to additional conditions, including, among others: (i) material compliance by Berto and Merger Sub with their respective agreements and covenants under the Business Combination Agreement; (ii) the truth and accuracy of the representations and warranties of Berto and Merger Sub, subject to customary bring-down standards; (iii) the execution of the Registration Rights Agreement and Lock-Up Agreements; and (iv) the sum of (A) the aggregate cash proceeds available for release to Berto from the trust account established in connection with Berto’s initial public offering (the “Trust Account”) in connection with the Business Combination, net of amounts payable in respect of redemptions but prior to the payment of transaction expenses, (B) the aggregate cash proceeds actually received by Berto on the Closing Date from the PIPE Investment, Additional Financing or any other financing permitted under the Business Combination Agreement, (C) any cash or cash equivalents held by Berto outside the Trust Account as of immediately prior to the Domestication Effective Time, (D) any cash or cash equivalents held by Ampera and its subsidiaries as of immediately prior to the Merger Effective Time, and (E) the aggregate proceeds of any Permitted Company Financing received by Ampera on or prior to the Closing Date, equaling or exceeding the aggregate amount of proceeds raised by the PIPE Investments actually funded at or prior to Closing (the “Minimum Cash Condition”).

 

Termination

 

The Business Combination Agreement may be terminated under certain customary and limited circumstances, including, without limitation, (i) by Berto or Ampera, if the Closing has not occurred by March 15, 2027 (the “Outside Closing Date”), which date will automatically extend to April 15, 2027 if the SEC has not declared the Registration Statement effective on or prior to February 11, 2027, and will automatically extend to May 12, 2027 if the SEC has not declared the Registration Statement effective on or prior to April 8, 2027; (ii) by Berto or Ampera, in the event an applicable governmental, regulatory or administrative authority has issued a final and non-appealable order having the effect of permanently restraining, enjoining or otherwise prohibiting the Business Combination or in the event any applicable law is in effect making the consummation of the Merger illegal; (iii) by the written consent of Berto and Ampera; and (iv) by Berto or Ampera, if Berto or Ampera, as applicable, has breached any of its respective representations, warranties, agreements or its respective covenants contained in the Business Combination Agreement, such failure or breach would render certain conditions precedent to the Closing incapable of being satisfied, and such breach or failure is not cured by the time allotted in the Business Combination Agreement; provided, however, in the case of (i), (ii) and (iii), such ability to terminate is only available if failure by the party seeking to terminate the Business Combination Agreement to fulfill any obligation under the Business Combination Agreement has not been the proximate cause of the failure of the Closing to occur.

 

Additionally, the Business Combination Agreement may be terminated at any time prior to the Domestication by Berto or Ampera by written notice to the other if the Berto Shareholder Approval is not obtained at the Berto Shareholders Meeting (subject to any adjournment or postponement thereof). Berto may terminate the Business Combination Agreement if the Ampera Stockholder Approval is not obtained or is not delivered to Berto by Ampera within twenty-four (24) hours after the execution and delivery of the Business Combination Agreement (“Ampera Stockholder Consent Deadline”), provided that Berto shall provide written notice of its intent to terminate on or prior to five (5) Business Days following the Ampera Stockholder Consent Deadline.

 

Effect of Termination

 

If the Business Combination Agreement is terminated, the agreement will become void, and there will be no liability under the Business Combination Agreement on the part of any party thereto, except for any liability on the part of any party for fraud or willful breach of the Business Combination Agreement.

 

3

 

 

Governance

 

The executive management team of Ampera is expected to serve as the executive management team of PubCo following Closing. Pursuant to the Business Combination Agreement, PubCo’s board of directors will initially consist of five directors: one independent director designated by the Sponsor, who will serve as lead independent director; three independent directors designated by Ampera after consultation with Berto; and Ampera’s Chief Executive Officer; provided that at least a majority of the board will qualify as independent directors.

 

Timeframes for Filing and Closing

 

Berto expects to file the Registration Statement as promptly as practicable after the date of the Business Combination Agreement. The Closing is expected to occur following the fulfillment or waiver of the closing conditions set forth in the Business Combination Agreement.

 

The foregoing description of the Business Combination Agreement and the Business Combination does not purport to be complete and is qualified in its entirety by reference to the full text of the Business Combination Agreement, a copy of which is included as Exhibit 2.1 to this Current Report on Form 8-K (this “Current Report”). The Business Combination Agreement contains representations, warranties and covenants that the respective parties made to each other as of the date of the Business Combination Agreement or other specific dates. The assertions embodied in those representations, warranties and covenants were made for purposes of the contract among the respective parties and are subject to important qualifications and limitations agreed to by the parties in connection with negotiating the Business Combination Agreement. The Business Combination Agreement is being filed to provide investors with information regarding its terms. It is not intended to provide any other factual information about the parties to the Business Combination Agreement. In particular, the representations, warranties, covenants and agreements contained in the Business Combination Agreement, which were made only for purposes of the Business Combination Agreement and as of specific dates, were solely for the benefit of the parties to the Business Combination Agreement, may be subject to limitations agreed upon by the contracting parties (including being qualified by confidential disclosures made for the purposes of allocating contractual risk between the parties to the Business Combination Agreement instead of establishing these matters as facts) and may be subject to standards of materiality applicable to the contracting parties that differ from those applicable to investors, security holders and reports and documents filed with the SEC. Investors and security holders are not third-party beneficiaries under the Business Combination Agreement and should not rely on the representations, warranties, covenants and agreements, or any descriptions thereof, as characterizations of the actual state of facts or condition of any party to the Business Combination Agreement. In addition, the representations, warranties, covenants and agreements and other terms of the Business Combination Agreement may be subject to subsequent waiver or modification. Moreover, information concerning the subject matter of the representations and warranties and other terms may change after the date of the Business Combination Agreement, which subsequent information may or may not be fully reflected in Berto’s public disclosures.

 

Other Agreements

 

The Business Combination Agreement contemplates the execution of various additional agreements and instruments, on or before the Closing, including, among others, the following:

 

Berto Support Agreement

 

In connection with the execution of the Business Combination Agreement, on November 17, 2026, certain shareholders and insiders of Berto (the “Berto Supporting Shareholders”), including Berto Acquisition Sponsor LLC, a Cayman Islands limited liability company (the “Sponsor”), entered into a support agreement with Berto and Ampera (the “Berto Support Agreement”). Under the Berto Support Agreement, among other things, each Berto Supporting Shareholder agreed to vote, at any meeting of the shareholders of Berto, and in any action by written consent of the shareholders of Berto, all of such Berto Supporting Shareholder’s Berto Ordinary Shares (i) in favor of each of the Parent Proposals (as defined in the Business Combination Agreement), and any other matters necessary or reasonably requested by Berto for consummation of the Domestication, the Merger or any other transactions contemplated by the Business Combination Agreement and the approval of the Parent Proposals; (ii) against any Alternative Proposal or Alternative Transaction or any proposal relating to an Alternative Proposal or Alternative Transaction (as defined in the Business Combination Agreement, respectively); and (iii) in favor of any proposal sought by Berto to extend the deadline by which Berto must consummate its initial business combination. In addition, the Berto Support Agreement prohibits each Berto Supporting Shareholder from, among other things, selling, assigning or transferring any Berto Ordinary Shares held by such Berto Supporting Shareholder except to certain permitted transferees, until the earliest of (a) the effective time of the Merger, (b) such date and time as the Business Combination Agreement is terminated in accordance with its terms, and (c) the written agreement of the Berto Supporting Shareholders, Berto and Ampera to terminate the Berto Support Agreement.

 

4

 

 

The foregoing description of the Berto Support Agreement does not purport to be complete and is qualified in its entirety by the full text of the Berto Support Agreement, a copy of which is included as Exhibit 10.1 to this Current Report.

 

Ampera Written Consent and Support Agreements

 

Following the signing of the Business Combination Agreement, on November 17, 2026, Ampera obtained and delivered to Berto the written consents of a sufficient number of shares of Ampera capital stock (the holders of such shares, the “Ampera Consenting Stockholders”) required to approve the Business Combination Agreement, each ancillary agreement to which Ampera is a party, and the Business Combination (the “Ampera Written Consent”).

 

The foregoing description of the Ampera Written Consent does not purport to be complete and is qualified in its entirety by the full text of the Form of Company Stockholder Written Consent, a copy of which is included as Exhibit H to the Business Combination Agreement, which is filed as Exhibit 2.1 to this Current Report.

 

Additionally, concurrently and immediately prior to the signing of the Business Combination Agreement, Berto, Ampera, and certain stockholders of Ampera (the “Ampera Supporting Stockholders”) entered into a support agreement (the “Ampera Support Agreement”). Pursuant to the Ampera Support Agreement, each Ampera Supporting Stockholder (i) agreed to vote in favor of the Business Combination Agreement, the Domestication and the Merger and the other transactions contemplated thereby, (ii) agreed not to make any proposal or offer that constitutes an Alternative Transaction, among other things, and (iii) waived and agreed not to exercise any rights of appraisal or rights to dissent it may have in connection with the Merger.

 

The Ampera Support Agreement also prohibits the Ampera Supporting Stockholders from, among other things, selling, assigning or transferring any capital stock of Ampera held by the Ampera Supporting Stockholders except to certain permitted transferees, until the earliest of (a) the effective time of the Merger, (b) such date and time as the Business Combination Agreement is terminated in accordance with its terms, and (c) the written agreement of all Ampera Supporting Stockholders, Berto and Ampera to terminate the agreement in its entirety.

 

The foregoing description of the Ampera Support Agreement does not purport to be complete and is qualified in its entirety by the full text of the Form of Ampera Support Agreement, a copy of which is included as Exhibit 10.2 to this Current Report.

 

Subscription Agreements

 

In connection with the Business Combination, on November 17, 2026, Berto entered into subscription agreements (the “Subscription Agreements”) with certain qualified institutional buyers, institutional accredited investors, and other accredited investors (collectively, the “PIPE Investors”), pursuant to which, among other things, PubCo agreed to issue and sell to the PIPE Investors, and the PIPE Investors agreed to subscribe for and purchase, an aggregate of approximately $30 million of PubCo Class A Common Stock (the “PIPE Shares”), at a purchase price equal to the Redemption Price (the “PIPE Investments”).

 

The obligations of each party to consummate the PIPE Investments are conditioned upon, among other things, (i) the PubCo Class A Common Stock having been approved for listing on the Stock Exchange; (ii) all conditions precedent to the closing of the Business Combination set forth in the Business Combination Agreement having been satisfied or waived; and (iii) the absence of specified adverse laws, rules, regulations, judgments, decrees, executive orders or awards making the PIPE Investments illegal or otherwise prohibiting its consummation.

 

The obligations of Berto to consummate the PIPE Investments are further subject to additional conditions, including, among other things: (i) material compliance by the PIPE Investors with their agreements and covenants under the Subscription Agreements; and (ii) the truth and accuracy of the representations and warranties of the PIPE Investors, subject to customary bring-down standards.

 

5

 

 

The obligations of the PIPE Investors to consummate the PIPE Investments are further subject to additional conditions, including, among other things: (i) the Business Combination Agreement shall not have been amended, modified or supplemented, and no condition waived thereunder, in a manner that would reasonably be expected to materially and adversely affect the economic benefits that a PIPE Investor would reasonably expect to receive under its Subscription Agreement; (ii) the truth and accuracy of the representations and warranties of Berto in the Subscription Agreement, subject to customary bring-down standards; (iii) other than with respect to the IonQ Side Letter (as defined below), no subscription agreement or other agreement or understanding with any other investor shall have been amended, modified or waived in any manner that benefits such other subscriber unless the PIPE Investors have been offered the same benefits; and (iv) material compliance by Berto with its agreements and covenants under the Subscription Agreement.

 

The foregoing description of the Subscription Agreements does not purport to be complete and is qualified in its entirety by the full text of the Form of Subscription Agreement, a copy of which is included as Exhibit 10.3 to this Current Report.

 

In connection with IonQ, Inc.’s (“IonQ”) PIPE Investment, Berto, Ampera and IonQ entered into a side letter, dated November 17, 2026 (the “IonQ Side Letter”). Pursuant to the IonQ Side Letter, Ampera agreed to take all actions necessary to include one director selected by IonQ on Ampera’s board of directors immediately following the Closing Date. IonQ will thereafter have the right to nominate one director for inclusion in the board-recommended slate at applicable stockholder meetings, and Ampera will be required to facilitate such nominee’s nomination and election, for so long as IonQ and its affiliates collectively retain at least 50% of the number of Ampera voting securities held by IonQ immediately following the Closing Date, subject to adjustment for stock splits, stock dividends and similar transactions. Any such designee or nominee must qualify as independent under applicable Stock Exchange rules, be unaffiliated with IonQ and be approved by Ampera, and IonQ may not designate, nominate or maintain more than one director at any time. Until that ownership threshold is no longer satisfied, IonQ will also have rights, subject to specified legal and regulatory limitations, to receive notice of certain third-party proposals to acquire at least 5% of Ampera’s voting securities or consolidated assets and certain proposed capital raises of at least $10 million, including notice of material changes to previously notified terms, and certain other information rights. In addition, IonQ will enter into a lock-up agreement in substantially the same form as the Lock-Up Agreement, pursuant to which IonQ will agree not to transfer except for certain permitted transfers as set forth therein) the PIPE Shares purchased by it until the earliest of (i) 18 months after the Closing Date, (ii) the date on which PubCo completes a liquidation, merger, capital share exchange, reorganization or other similar transaction that results in all of PubCo’s shareholders having the right to exchange their PubCo Class A Common Stock for cash, securities or other property, and (iii) the date, following the 12-month anniversary of the Closing Date, on which the closing price of the PubCo Class A Common Stock has equaled or exceeded $18.00 per share for 30 consecutive trading days. The foregoing description of the IonQ Side Letter does not purport to be complete and is qualified in its entirety by reference to its full text, included as Exhibit 10.4 to this Current Report.

 

Lock-Up Agreement

 

In connection with the Closing, the Sponsor and certain other holders to be mutually agreed by Berto and Ampera (the “Lock-Up Stockholders”) will enter into a lock-up agreement (the “Lock-Up Agreement”) with PubCo.

 

Pursuant to the Lock-Up Agreement, the Sponsor and each other Lock-Up Stockholder will agree not to transfer (except for certain permitted transfers) any shares of PubCo Common Stock held by such holder after the Domestication until the earlier of (x) 24 months after the Closing Date, (y) the date on which the closing price of the PubCo Common Stock has equaled or exceeded $18.00 per share (as adjusted for share sub-divisions, share capitalizations, reorganizations, recapitalizations, and the like), and (z) the date on which PubCo completes a liquidation, merger, capital stock exchange, reorganization or other similar transaction that results in all of PubCo’s shareholders having the right to exchange their shares of PubCo Common Stock for cash, securities, or other property. The Berto Warrants held by the Sponsor and other insiders will not be subject to the Lock-Up Agreement.

 

The foregoing description of the Lock-Up Agreement does not purport to be complete and is qualified in its entirety by the full text of the Form of Lock-Up Agreement, a copy of which is included as Exhibit 10.5 to this Current Report.

 

Registration Rights Agreement

 

In connection with the Closing, PubCo, the Sponsor, and certain former stockholders of Ampera will enter into a registration rights agreement (the “Registration Rights Agreement”). Pursuant to the Registration Rights Agreement, among other things, PubCo will agree that, within 30 calendar days following the Closing Date, PubCo will file with the SEC (at PubCo’s sole cost and expense) a registration statement registering the resale of certain shares of PubCo Common Stock held by or issuable to the parties thereto (the “Resale Registration Statement”), and PubCo will use its commercially reasonable efforts to have the Resale Registration Statement declared effective as soon as reasonably practicable after the filing thereof. Such holders will be entitled to customary piggyback registration rights and demand registration rights, including underwritten demands.

 

6

 

 

The Registration Rights Agreement amends and restates the registration rights agreement that was entered into by Berto and the Sponsor in connection with Berto’s initial public offering. The Registration Rights Agreement will terminate on the earlier of (a) the five-year anniversary of the date of the Registration Rights Agreement or (b) with respect to any holder party thereto, on the date that such holder no longer holds any Registrable Securities (as defined therein).

 

The foregoing description of the Registration Rights Agreement does not purport to be complete and is qualified in its entirety by the full text of the Form of Registration Rights Agreement, a copy of which is included as Exhibit 10.6 to this Current Report.

 

PubCo Certificate of Incorporation

 

Concurrently with the Domestication, and prior to the effective time of the Merger, PubCo will file a certificate of incorporation with the Secretary of State of the State of Delaware (“PubCo COI”) and will adopt bylaws (“PubCo Bylaws”), which together will govern the rights, privileges, and preferences of the holders of PubCo securities after the Closing. The PubCo COI will provide for a dual-class common stock structure consisting of PubCo Class A Common Stock and PubCo Class B Common Stock. Each share of PubCo Class A Common Stock will entitle the holder to one vote per share, and each share of PubCo Class B Common Stock will entitle the holder to twenty (20) votes per share. PubCo Class A Common Stock is expected to be the class of stock listed for trading on the Stock Exchange, while PubCo Class B Common Stock is expected to be held by Ampera’s founder and his permitted transferees, and will generally convert into PubCo Class A Common Stock upon transfer, subject to certain permitted transfers.

 

The foregoing description of the PubCo COI does not purport to be complete and is qualified in its entirety by the terms and conditions of the form of PubCo COI, a copy of which is included as Exhibit A to the Business Combination Agreement (attached as Exhibit 2.1 hereto), and the terms of which are incorporated herein by reference.

 

PubCo Equity Incentive Plan

 

Prior to the effectiveness of the Registration Statement, Berto will adopt an equity incentive plan (the “Plan”) to provide eligible employees of PubCo and certain affiliated companies with the opportunity to purchase PubCo Common Stock and/or acquire a proprietary interest in PubCo.

 

The Plan will provide for an initial reserve of shares of PubCo Class A Common Stock not exceeding 10% of PubCo Class A Common Stock on a fully diluted basis, calculated after giving effect to the Business Combination but excluding Company Converted Options, as defined in the Business Combination Agreement. The Plan will also include an evergreen provision providing for an annual increase in the shares available for issuance not exceeding 5% of PubCo Common Stock on a fully diluted basis, as determined by PubCo’s board of directors.

 

The foregoing description of the Plan does not purport to be complete and is qualified in its entirety by the terms and conditions of the form of Plan, a copy of which is included as Exhibit H to the Business Combination Agreement (attached as Exhibit 2.1 hereto), and the terms of which are incorporated herein by reference.

 

Item 3.02 Unregistered Sales of Equity Securities.

 

The disclosure set forth above in Item 1.01 of this Current Report with respect to the issuance of PubCo Common Stock in connection with the transactions contemplated by the Business Combination Agreement and the Subscription Agreements is incorporated by reference herein. The shares of PubCo Common Stock issuable to the Ampera Consenting Stockholders pursuant to the Business Combination Agreement and the PIPE Shares issuable pursuant to the Subscription Agreements will not be registered under the Securities Act, in reliance on the exemption from registration provided by Section 4(a)(2) of the Securities Act.

 

Item 7.01 Regulation FD Disclosure.

 

On November 17, 2026, Berto and Ampera jointly issued a press release announcing that they had entered into the Business Combination Agreement. A copy of the press release is furnished hereto as Exhibit 99.1 and incorporated by reference herein. In addition, Berto and Ampera have prepared an investor presentation (the “Investor Presentation”) that will be used by Berto and Ampera in connection with the Business Combination. A copy of the Investor Presentation is furnished hereto as Exhibit 99.2 and incorporated by reference herein.

 

7

 

 

The information in this Item 7.01, including Exhibits 99.1 and 99.2, is furnished and shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or otherwise subject to liabilities under that section, and shall not be deemed to be incorporated by reference into the Company’s filings under the Securities Act or the Exchange Act, regardless of any general incorporation language in such filings.

 

Additional Information and Where to Find It

 

In connection with the proposed Business Combination, Berto and Ampera intend to prepare and file with the SEC a Registration Statement, which will include a preliminary proxy statement of Berto and a preliminary prospectus with respect to the securities to be offered in the Business Combination. After the Registration Statement is declared effective, Berto will mail a definitive proxy statement/prospectus relating to the Business Combination to its shareholders as of a record date to be established for voting on the Business Combination. This Current Report is not a substitute for the Registration Statement or any other document that Berto or Ampera may file with the SEC. INVESTORS AND SHAREHOLDERS OF BERTO ARE URGED TO READ ALL RELEVANT DOCUMENTS FILED OR TO BE FILED WITH THE SEC IN CONNECTION WITH THE BUSINESS COMBINATION, INCLUDING THE REGISTRATION STATEMENT (WHEN IT IS AVAILABLE), THE PROXY STATEMENT/PROSPECTUS CONTAINED THEREIN, AND ANY AMENDMENTS OR SUPPLEMENTS THERETO, BECAUSE THEY WILL CONTAIN IMPORTANT INFORMATION ABOUT BERTO, AMPERA, AND THE BUSINESS COMBINATION. This Current Report on Form 8-K does not contain all the information that should be considered concerning the Business Combination and other matters and is not intended to provide the basis for any investment decision or any other decision in respect of such matters. Berto and Ampera may also file other documents with the SEC regarding the Business Combination. Berto’s shareholders and other interested persons are advised to read, when available, the Registration Statement, including the preliminary proxy statement/prospectus contained therein, the amendments thereto and the definitive proxy statement/prospectus and other documents filed in connection with the Business Combination, as these materials will contain important information about Berto, Ampera, and the Business Combination. Shareholders will also be able to obtain free copies of these documents, once available, without charge, from the SEC’s website at www.sec.gov, or by directing a request to Berto Acquisition Corp., 1180 North Town Center Drive, Suite 100, Las Vegas, Nevada 89144.

 

Participants in the Solicitation

 

Berto, Ampera, and their respective directors, managers and executive officers may be deemed under SEC rules to be participants in the solicitation of proxies from Berto’s shareholders in connection with the Business Combination and the other matters set forth in the Registration Statement. Investors and security holders may obtain more detailed information regarding the names and interests of Berto’s directors and executive officers in Berto’s Annual Report on Form 10-K for the year ended December 31, 2025, filed with the SEC on March 31, 2026, under the headings “Directors, Executive Officers and Corporate Governance,” “Executive Compensation,” “Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters,” and “Certain Relationships and Related Transactions, and Director Independence,” which is available free of charge at the SEC’s website located at www.sec.gov, or by directing a request to Berto Acquisition Corp., 1180 North Town Center Drive, Suite 100, Las Vegas, Nevada 89144. Additional information regarding the participants in the proxy solicitation and a description of their direct and indirect interests by security holdings or otherwise will be contained in the proxy statement/prospectus relating to the Business Combination when it becomes available. Investors, shareholders and other interested persons are urged to read the Registration Statement, the proxy statement/prospectus included therein and other relevant documents filed or to be filed with the SEC carefully and in their entirety when they become available because they will contain important information about the Business Combination. Free copies of those documents will be available through the SEC’s website at www.sec.gov.

 

No Offer or Solicitation

 

This Current Report on Form 8-K shall not constitute a solicitation of a proxy, consent or authorization with respect to any securities or in respect of the Business Combination, or an offer to sell, or the solicitation of an offer to buy, any securities, nor will there be any sale of securities in any states or jurisdictions in which such offer, solicitation, or sale would be unlawful prior to registration or qualification under the securities laws of any such jurisdiction. No offering of securities shall be made except by means of a prospectus meeting the requirements of Section 10 of the Securities Act of 1933, as amended, or an exemption therefrom. Neither the SEC nor any securities commission of any other U.S. or non-U.S. jurisdiction has approved, disapproved, or determined that this Current Report is truthful or complete. Any representation to the contrary is a criminal offense.

 

8

 

 

Forward-Looking Statements

 

Certain statements included in this Current Report that are not historical facts are forward-looking statements with respect to Berto, Ampera and the combined company. The expectations, estimates and projections of the business of Ampera and the combined company may differ from actual results, and consequently these forward-looking statements should not be relied on as predictions of future events. Forward-looking statements generally are accompanied by words such as “believe,” “may,” “will,” “could,” “estimate,” “continue,” “anticipate,” “intend,” “expect,” “should,” “would,” “plan,” “predict,” “potential,” “seem,” “seek,” “future,” “outlook” and similar expressions that predict or indicate future events or trends or that are not statements of historical matters. These forward-looking statements include, without limitation, statements regarding expectations relating to the Business Combination, including the proceeds of the Business Combination and any financing, the ability to obtain financing on acceptable terms, the timing of the Closing, future financial performance, operating results and technology of Ampera and the combined company, market opportunity and larger trends in the nuclear industry. These statements are based on various assumptions, whether or not identified in this Current Report, and on the current expectations of Ampera’s and Berto’s management and are not predictions of actual performance. These forward-looking statements involve significant risks and uncertainties that could cause actual results to differ materially from expected results, including, without limitation: (1) the risk that the Business Combination may not be completed in a timely manner or at all; (2) the risk that the Business Combination may not be completed by Berto’s business combination deadline of May 1, 2027; (3) the failure by Berto and Ampera to satisfy the conditions to the consummation of the Business Combination, including the approval of Berto’s shareholders and the satisfaction of the Minimum Cash Condition; (4) the occurrence of any event, change or other circumstance that could give rise to the termination of the definitive agreements related to the Business Combination; (5) changes to the proposed structure of the Business Combination that may be required or appropriate as a result of applicable laws or regulations; (6) the effect of the announcement or pendency of the Business Combination on Ampera’s business; (7) the inherent uncertainty associated with nuclear energy technology development, including the risk that Ampera’s reactor design, manufacturing process or fuel production may not perform as expected or may be delayed; (8) the possibility that the U.S. Nuclear Regulatory Commission or other regulatory authorities may not grant necessary approvals, licenses or permits, or may require additional information or conditions; (9) Ampera’s limited operating history, the early-stage nature of its technology and the risk that the combined company may not be able to scale its manufacturing operations or achieve projected unit economics; (10) competition from other nuclear technology companies, conventional energy sources and alternative clean energy technologies; (11) Ampera’s dependence on specialized nuclear fuel and materials, including thorium-based TRISO fuel, and the risk of supply chain disruptions; (12) the ability to obtain and maintain intellectual property protection; (13) the availability of funding to support continued research and development, including the amount of financing raised in the Business Combination, and the amount of redemption requests made by Berto’s public shareholders; (14) the failure to realize the anticipated benefits of the Business Combination; (15) risks relating to any legal proceedings that may be instituted against Berto, Ampera, the combined company or others following the announcement of the Business Combination; (16) the ability of the combined company to meet the initial listing requirements of the Stock Exchange, and Berto’s and the combined company’s ability to maintain compliance with the continued listing requirements of Nasdaq or the applicable Stock Exchange; (17) changes in domestic and foreign business, market, financial, political and legal conditions; (18) risks relating to the uncertainty of projected financial information with respect to Ampera and the combined company; (19) the ability to negotiate definitive contractual arrangements with potential customers; and (20) those risk factors discussed in Berto’s Annual Report on Form 10-K for the year ended December 31, 2025, filed with the SEC on March 31, 2026, the Registration Statement and other documents filed or to be filed by Berto and Ampera with the SEC. These forward-looking statements are provided for illustrative purposes only and are not intended to serve as and must not be relied on by an investor as a guarantee, an assurance, a prediction or a definitive statement of fact or probability. They are neither statements of historical fact nor promises or guarantees of future performance. Actual events and circumstances are difficult or impossible to predict, may differ from assumptions and are often beyond the control of Ampera and Berto. If any of these risks materialize or Berto’s or Ampera’s assumptions prove incorrect, actual results could differ materially and adversely from those expressed or implied by these forward-looking statements. There may be additional risks that neither Berto nor Ampera presently knows or that Berto and Ampera currently believe are immaterial that could also cause actual results to differ from those contained in the forward-looking statements. Forward-looking statements reflect Berto’s and Ampera’s expectations, plans or forecasts of future events and views as of the date of this Current Report and are qualified in their entirety by reference to the cautionary statements herein. Berto and Ampera anticipate that subsequent events and developments will cause their assessments to change. These forward-looking statements should not be relied upon as representing their assessments as of any subsequent date. Accordingly, undue reliance should not be placed upon these forward-looking statements. Neither Berto nor Ampera, nor any of their respective affiliates, undertakes or accepts any obligation to release publicly any updates or revisions to any forward-looking statements to reflect any change in expectations or any change in events, conditions or circumstances on which any such statement is based, except as required by law. Investors should carefully consider the foregoing factors and the other risks and uncertainties described in the “Risk Factors” section of Berto’s Annual Report on Form 10-K and the Registration Statement (when available).

 

9

 

 

Item 9.01 Financial Statements and Exhibits.

 

Exhibit No.   Description
2.1+   Business Combination Agreement, by and among Berto Acquisition Corp., Ampera, Inc. and Berto Merger Sub, Inc., dated as of November 17, 2026.
10.1+   Berto Support Agreement, dated as of November 17, 2026.
10.2+   Form of Ampera Support Agreement, dated as of November 17, 2026.
10.3   Form of Subscription Agreement.
10.4   IonQ Side Letter Agreement.
10.5   Form of Lock-Up Agreement.
10.6+   Form of Amended and Restated Registration Rights Agreement.
99.1   Press Release, dated November 17, 2026.
99.2   Investor Presentation.
104   Cover Page Interactive Data File (embedded within the Inline XBRL document).

 

 
+Certain of the exhibits and schedules to this Exhibit have been omitted in accordance with Regulation S-K Item 601(a)(5). The registrant agrees to furnish a copy of all omitted exhibits and schedules to the SEC upon its request.

 

10

 

 

SIGNATURE

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

 

  BERTO ACQUISITION CORP.
     
  By: /s/ Harry You
    Name: Harry You
    Title: Executive Chairman
     
Dated: November 18, 2026    

 

11

 

Exhibit 99.1

 

AMPERA and Berto Announce Proposed Business Combination to Accelerate Advanced Energy Technology Development and Commercialization

 

●Transaction values AMPERA at approximately $900 million on a pre-money equity basis.

 

  ● Transaction expected to provide up to approximately $357 million in gross cash proceeds at closing, including more than $30 million from a common stock private investment in public equity (“PIPE”) financing, $10 million in pre-transaction close equity and debt financing, and $317 million of cash held in Berto’s trust account, assuming no redemptions by Berto’s public shareholders and before payment of transaction expenses.

 

  ● The PIPE financing and recent investments have been anchored by several key strategic investors across diversified end markets in which AMPERA intends to sell into, including AI data centers, quantum computing, defense, maritime and industrial sectors.

 

PALM BEACH GARDENS, Fla. and LAS VEGAS, Nov. 17, 2026 – AMPERA, Inc. (AMPERA), a next-generation energy company developing compact, modular and scalable systems, and Berto Acquisition Corp. (“Berto”), a publicly traded special purpose acquisition company (Nasdaq: TACO), today announced that they have entered into a definitive agreement for a business combination. The transaction implies an equity value for AMPERA of approximately $900 million on a pre-money equity.

 

Targeting energy demand needs, AMPERA is developing scalable power solutions for data center, defense, industrial and maritime applications. As part of its business strategy, AMPERA is pursuing near-term commercial power generation using heat recovery and conventional fuels through its PowerNOW™ program, while simultaneously conducting longer-term development of advanced nuclear technology through its NuclearNEXT™ approach. AMPERA is combining advanced manufacturing, artificial intelligence, emerging quantum computing capabilities and next-generation energy technologies to develop reliable, highly efficient, factory-built power systems.

 

In connection with the business combination, on Nov. 17, 2026, Berto entered into subscription agreements (“PIPE Subscription Agreements”) with certain institutional and accredited investors and strategic investors (the “Subscribers”). Pursuant to the PIPE Subscription Agreements, Berto has agreed to issue and sell, and the Subscribers agreed to subscribe for and purchase at closing, in a private placement, an aggregate of approximately $30 million of shares of Class A common stock of the post-merger combined company, at a per share price equal to the price at which Berto’s public shares may be redeemed in connection with the business combination. In addition to the PIPE financing, AMPERA has closed or received commitments for an additional $10 million in pre-transaction close equity and debt financing, bringing total capital commitments in excess of $40 million to date. The PIPE and the company’s existing investors include a leading AI data center equipment provider, one of the world’s largest quantum computing companies, a global maritime company, a U.S. defense contractor and a Middle East industrial investor.

 

Berto and AMPERA are in discussions with a number of strategic and institutional investors regarding an additional $50 million to $100 million of PIPE capital. No definitive agreements have been signed for this additional capital, there is no assurance it will be raised, and the final amount may be higher or lower. Any additional capital would be incremental to the PIPE described above, and the transaction is not conditioned on its being raised. The minimum cash condition in the transaction is set at the final PIPE raise amount. Accordingly, the transaction has no minimum cash condition above the amount of PIPE capital raised. For illustrative purposes, assuming $100 million of additional PIPE capital and no redemptions, gross capital available to AMPERA could exceed $450 million.

 

Upon closing, which is subject to approval by the stockholders of both AMPERA and Berto, receipt of required regulatory approvals and satisfaction or waiver of customary closing conditions, including the minimum cash condition described above, the combined company is expected to be named “AMPERA, Inc.” and is anticipated to list on the Nasdaq Stock Market under the ticker symbol “AMPR”, subject to Nasdaq approval. The transaction is currently expected to close in the first quarter of 2027, although there can be no assurance regarding the timing or completion of the transaction. AMPERA intends to use expected proceeds from the transaction to fund its platform development and initial commercial scale-up, although the amount of proceeds available to the combined company will depend on, among other things, the level of redemptions by Berto’s shareholders and the total amount of financing raised.

 

 

 

 

“This transaction represents a defining milestone for AMPERA as we work to bring our advanced energy technologies to market,” said Brian Matthews, Founder and CEO, AMPERA. “The rapid growth of AI infrastructure, data centers and industrial electrification is creating unprecedented demand for reliable, scalable power. Our PowerNOW platform is designed to address that demand through modular, high-efficiency power generation systems, with initial commercial deliveries targeted for 2027. In parallel, our NuclearNEXT program is advancing a fundamentally different approach to nuclear energy through a source-assisted, subcritical thorium architecture. We believe the combination of near-term commercial opportunities and longer-term nuclear innovation creates a compelling foundation for significant growth.”

 

AMPERA is developing a proprietary supercritical carbon dioxide (sCO₂) platform, the sPower™ power conversion cycle. The sPower technology is applicable across PowerNOW solutions, gas turbine bottoming cycles, industrial heat recovery and eventually NuclearNEXT.

 

AMPERA’s PowerNOW strategy provides fuel flexibility, efficiency and deployability advantages. The company currently plans to offer four configurations:

 

  ● AMP-G7.5: AMPERA’s initial natural-gas-fired system utilizing sPower, targeting 7.5MW net electrical output and commercial production in Q4 2027.

 

  ● AMP-G15: The next-generation evolution of AMP-G7.5, utilizing an enhanced sPower conversion system, targeting 15MW net electrical output.

 

  ● sPower Heat Recovery: For use in industrial waste heat recovery, efficient bottoming cycle on gas turbines and other third-party heat sources.

 

  ● PowerNOW Gas Turbine Variant: A higher-capacity configuration under development that integrates a conventional gas turbine with AMPERA’s proprietary sPower bottoming cycle, targeting up to 45MW total electrical output.

 

Under its NuclearNEXT strategy, AMPERA is developing the AMP-N15 to include a proprietary thorium-fueled, factory-sealed reactor based on a source-assisted subcritical architecture that targets 15MW net electrical output and an up-to 30-year core life with no routine refueling.

 

“We believe the combined entity will create significant value for shareholders by capturing what we see as a transformational market opportunity,” said Harry L. You, Executive Chairman, Berto Acquisition Corp. “AMPERA is uniquely positioned to lead the commercialization of near-term power production and the industrialization of nuclear energy at scale, serving the power demand from AI data centers, defense applications, maritime and industrial users. The AMPERA nuclear platform distinctively combines subcritical architecture, thorium fuel, no refueling, environmentally friendly non-water based cooling, and factory manufacturing in a single system. We have great confidence in the leadership of Brian Matthews and his team.”

 

Advisors

 

Needham & Company, LLC is serving as financial advisor to AMPERA and as placement agent for the PIPE transaction. Sichenzia Ross Ference Carmel LLP is serving as legal advisor to AMPERA.

 

White & Case LLP is serving as legal advisor to Berto.

 

2

 

 

Important Information About The Proposed Business Combination And Where To Find It

 

In connection with the proposed business combination, AMPERA and Berto (together the “Parties”) intend to file relevant materials with the U.S. Securities and Exchange Commission (the “SEC”), including a registration statement on Form S-4 (the “Registration Statement”), which will include a preliminary proxy statement of Berto and a preliminary prospectus with respect to the securities to be offered in the business combination. After the Registration Statement is declared effective, Berto will mail the definitive proxy statement included therein to holders of Berto’s ordinary shares in connection with Berto’s solicitation of proxies for the vote of Berto’s shareholders with respect to the proposed business combination. This press release is not a substitute for the Registration Statement or any other document that may be filed by the Parties with the SEC. INVESTORS AND SHAREHOLDERS OF BERTO ARE URGED TO READ ALL RELEVANT DOCUMENTS FILED BY EACH OF THE PARTIES WITH THE SEC IN CONNECTION WITH THE TRANSACTIONS, INCLUINCLUDING THE REGISTRATION STATEMENT AND THE PROXY STATEMENT/PROSPECTUS CONTAINED THEREIN, WHEN AVAILABLE, BECAUSE THEY WILL CONTAIN IMPORTANT INFORMATION ABOUT THE PARTIES AND THE TRANSACTIONS AND RELATED MATTERS. Investors and shareholders are or will be able to obtain these documents (when they are available) free of charge from the SEC’s website at www.sec.gov.

 

Participants In The Solicitation

 

The Parties and their respective directors, managers, and executive officers may be deemed under SEC rules to be participants in the solicitation of proxies of Berto’s shareholders in connection with the proposed business combination. Investors and security holders may obtain more detailed information regarding the names and interests of Berto’s directors and officers in Berto’s filings with the SEC, including Berto’s Annual Report on Form 10-K for the year ended December 31, 2025, filed with the SEC on March 31, 2026 (“Berto’s Annual Report”) under the headings “Directors, Executive Officers and Corporate Governance,” “Executive Compensation,” “Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters,” and “Certain Relationships and Related Transactions, and Director Independence”, which is available at: https://www.sec.gov/ix?doc=/Archives/edgar/data/0002033122/000182912626002856/bertoacquisition_10k.htm. Information regarding the persons who may, under SEC rules, be deemed participants in the solicitation of proxies of Berto’s shareholders in connection with the proposed business combination will be set forth in the Registration Statement, when available. Investors, shareholders, and other interested persons are urged to read the Registration Statement, the proxy statement/prospectus included therein, and other relevant documents that will be filed with the SEC carefully and in their entirety when they become available because they will contain important information about the proposed business combination. Investors, shareholders, and other interested persons will be able to obtain free copies of the proxy statement/prospectus and other documents containing important information about the Parties through the website maintained by the SEC at www.sec.gov.

 

No Offer or Solicitation

 

This press release does not constitute a solicitation of a proxy, consent, or authorization with respect to any securities or in respect of the proposed business combination. This press release also does not constitute an offer to sell, or solicitation of an offer to buy, any securities, nor will there be any sale of securities in any states or jurisdictions in which such offer, solicitation, or sale would be unlawful prior to registration or qualification under the securities laws of any such jurisdiction. No offering of securities will be made except by means of a prospectus meeting the requirements of Section 10 of the Securities Act of 1933, as amended, or an exemption therefrom. Neither the SEC nor any securities commission of any other U.S. or non-U.S. jurisdiction has approved, disapproved, or determined that this press release is truthful or complete. Any representation to the contrary is a criminal offense.

 

3

 

 

Forward-Looking Statements

 

This communication includes “forward-looking statements” with respect to the Parties. The expectations, estimates, and projections of the business of AMPERA and the combined company may differ from its actual results and consequently, you should not rely on these forward-looking statements as predictions of future events. Words such as “expect,” “estimate,” “anticipate,” “intend,” “may,” “will,” “could,” “should,” “potential,” “plan” and similar expressions are intended to identify such forward-looking statements. These forward-looking statements include, without limitation, expectations related to future financial performance, operating results, and technology of AMPERA, market opportunity, and larger trends in the nuclear industry. These forward-looking statements involve significant risks and uncertainties that could cause the actual results to differ materially from the expected results and are subject to, without limitation, (1) the risk that the proposed business combination may not be completed in a timely manner or at all; (2) the risk that the proposed business combination may not be completed by Berto’s business combination deadline of May 1, 2027; (3) the failure by the Parties to satisfy the conditions to the consummation of the proposed business combination, including the approval of Berto’s shareholders; (4) the occurrence of any event, change, or other circumstance that could give rise to the termination of the negotiations or definitive agreements related to the proposed business combination; (5) changes to the proposed structure of the proposed business combination that may be required or appropriate as a result of applicable laws or regulations; (6) the effect of the announcement or pendency of the proposed business combination on AMPERA’s business; (7) the inherent uncertainty associated with nuclear energy technology development, including the risk that AMPERA’s reactor design, manufacturing process, or fuel production may not perform as expected or may be delayed; (8) the possibility that the U.S. Nuclear Regulatory Commission or other regulatory authorities may not grant necessary approvals, licenses, or permits, or may require additional information or conditions; (9) AMPERA’s limited operating history, the early-stage nature of its technology, and the risk that the combined company may not be able to scale its manufacturing operations or achieve projected unit economics; (10) competition from other nuclear technology companies, conventional energy sources, and alternative clean energy technologies; (11) AMPERA’s dependence on specialized nuclear fuel and materials, including thorium-based TRISO fuel, and the risk of supply chain disruptions; (12) the ability to obtain and maintain intellectual property protection; (13) the availability of funding to support continued research and development, including the amount of financing raised in the proposed transaction, and the amount of redemption requests made by Berto’s public shareholders; (14) the failure to realize the anticipated benefits of the proposed business combination; (15) risks relating to any legal proceedings that may be instituted against Berto, AMPERA, the combined company or others following the announcement of the proposed business combination; (16) the ability of the combined company to meet the initial listing requirements of the Nasdaq Stock Market or another national securities exchange, and Berto’s and the combined company’s ability to maintain compliance with the continued listing requirements of Nasdaq; and (17) those risk factors discussed in Berto’s Annual Report, the Registration Statement, and other documents filed or to be filed by the Parties with the SEC.

 

These forward-looking statements are provided for illustrative purposes only and are not intended to serve as and must not be relied on by an investor as a guarantee, an assurance, a prediction, or a definitive statement of fact or probability. They are neither statements of historical fact nor promises or guarantees of future performance. Therefore, actual results may differ materially and adversely from those expressed or implied in any forward-looking statements and the Parties therefore caution against placing undue reliance on any of these forward-looking statements. The Parties do not undertake or accept any obligation to release publicly any updates or revisions to any forward-looking statements to reflect any change in its expectations or any change in events, conditions, or circumstances on which any such statement is based, except as required by applicable securities laws. You should carefully consider the foregoing factors and the other risks and uncertainties described in the “Risk Factors” section of Berto’s Annual Report and the Registration Statement (when available).

 

CONTACT:

 

Greg Brostowicz, Vice President, Marketing + Communications
Greg.Brostowicz@amperaglobal.com

 

4

 

Exhibit 99.2

 

Unified Gas - to - Nuclear Energy Platform with Near - term Deployment Timeline Investor Presentation – November 2026

 

 

 

Notes and Important Disclosures This presentation (together with oral statements made in connection herewith, the “Presentation”) has been prepared solely for the purpose of furnishing information to interested parties to assist them in making their own evaluation with respect to the proposed business combination transaction (the “Business Combination”) among AMPERA, Inc. (“AMPERA” or the “Company”), a Delaware corporation, and Berto Acquisition Corp. (“Berto”, and together with AMPERA, the “Parties”), a special purpose acquisition company incorporated as a Cayman Islands exempted company, and the contemplated financing and related transactions (together with the Business Combination, the “Transactions”). This Presentation is being delivered solely to recipients that are “qualified institutional buyers” as defined in Rule 144A under the Securities Act of 1933, as amended (the “Securities Act”), institutional “accredited investors” within the meaning of Rule 501(a)(1), (2), (3) or (7) under the Securities Act, or “accredited investors” within the meaning of Rule 501(a)(5) or (6) of Regulation D under the Securities Act, by Needham & Company, LLC (“Needham”), as financial advisor to the Company and placement agent to Berto in connection with the Transactions. Past performance by AMPERA, its management team, and by Berto and its management team and sponsor is not a guarantee of future performance. Therefore, you should not place undue reliance on the historical record of the performance of AMPERA, its management team, or by Berto and its management team and sponsor, or businesses associated with them as indicative of future performance of an investment or the returns that AMPERA will, or is likely to, generate going forward. No Representations and Warranties No representations or warranties, express or implied are given in, or in respect of, this Presentation or with respect to the accuracy, completeness or reliability of the information contained in this Presentation. Nothing contained herein shall be relied upon as a promise or representation, whether as to the past or future performance of any of the Parties. The information contained in this Presentation is provided as of the date hereof and may change, and none of the Parties, Needham, or any of their respective representatives undertakes any obligation to update such information, including in the event that such information becomes inaccurate or incomplete. To the fullest extent permitted by law, in no circumstances will the Parties, Needham, or any of their respective subsidiaries, affiliates, representatives, partners, directors, officers, employees, advisers, or agents be responsible or liable for any direct, indirect, or consequential loss or loss of profit arising from the use of this Presentation, its contents, its omissions, reliance on the information contained within it, or on opinions communicated in relation thereto or otherwise arising in connection therewith. In addition, this Presentation does not purport to be all - inclusive or to contain all of the information that may be required to make a full analysis of the Parties or the Transactions. Recipients of this Presentation should make their own evaluation of the Parties and the Transactions and of the relevance and adequacy of the information and should make such other investigations as they deem necessary. Nothing herein should be construed as legal, financial, tax, or other advice. The general explanations included in this Presentation cannot address, nor are intended to address, your specific investment objectives, financial situations, or financial needs. Notwithstanding anything contained herein, there can be no assurance that the Transactions will be consummated on the terms described herein, within the time periods contemplated hereby, or at all. This Presentation shall not be taken as any form of commitment on the part of the Parties to proceed with any negotiations of the Business Combination or any other Transaction, and each of the Parties reserves the right to discontinue discussions or negotiations regarding the Transactions at any time for any reason or no reason. No Offer or Solicitation This Presentation does not constitute a solicitation of a proxy, consent, or authorization with respect to any securities. This Presentation also does not constitute an offer to sell, or solicitation of an offer to buy any securities, nor will there be any sale of securities in any states or jurisdictions in which such offer, solicitation, or sale would be unlawful prior to registration or qualification under the securities laws of any such jurisdiction. No offering of securities will be made except by means of a prospectus meeting the requirements of Section 10 of the Securities Act or an exemption therefrom. Neither the U.S. Securities and Exchange Commission (the “SEC”) nor any securities commission of any other U.S. or non - U.S. jurisdiction has approved, disapproved, or determined that this Presentation is truthful or complete. Any representation to the contrary is a criminal offense. Financial Information; Non - GAAP Measures The independent auditor of AMPERA has not examined or compiled the financial information and data contained in the Presentation; accordingly, no such independent auditor provides any assurance with respect to any financial information included herein. Such information and data may not be included in, may be adjusted in, or may be presented differently in, any registration statement, prospectus, proxy statement or other report or document to be filed or furnished by AMPERA, or any other report of document to be filed with the SEC. Any pro forma financial information, capitalization, ownership percentages or other post - Transactions information included herein is presented for illustrative purposes only, is based on assumptions and estimates deemed reasonable by management as of the date hereof, and is subject to change, which may be material. Some of the forward - looking financial information and data contained in this Presentation, such as Levelized Cost of Energy (LCOE), has not been prepared in accordance with United States generally accepted accounting principles (“GAAP”). LCOE is defined as the average cost to generate 1 MWh over a project’s life, including capital, operations, maintenance, and fuel. The Company believes that forward - looking LCOE provides useful information to management and investors because it reflects management’s estimate of the average lifecycle cost of electricity generation and provides a useful metric for evaluating projected unit economics and comparing generation technologies. The Company’s method of determining LCOE may be different from other companies’ methods and, therefore, may not be comparable to the same metric used by other companies. Management does not consider non - GAAP measures in isolation or as an alternative to financial measures determined in accordance with GAAP. Non - GAAP measures are subject to inherent limitations as they reflect the exercise of judgments by management about projected capital, operating, maintenance and fuel costs, capacity and utilization assumptions, and other factors affecting projected LCOE. A reconciliation for forward - looking LCOE is not provided because, as a forward - looking statement, such reconciliation is not available without unreasonable effort due to the high variability, complexity, and difficulty of estimation.

 

 

 

Industry and Market Data This Presentation has been prepared by the Parties and includes market data and other statistical information from third - party industry publications and sources as well as from research reports prepared for other purposes. Although the Parties believe that these third - party sources are reliable as of their respective dates, none of the Parties, Needham, or any of their respective representatives or affiliates have independently verified the accuracy or completeness of this information and cannot assure you of (and make no representation or warranty, express or implied with respect to) the accuracy or completeness of such data or statistical information. The Parties, Needham, and each of their respective affiliates, directors, officers, employees, members, partners, shareholders or agents do not make any representation or warranty with respect to the accuracy of such information. Trademarks This Presentation contains trademarks, service marks, trade names, and copyrights of the Parties and other companies which are the property of their respective owners. The use or display of third parties’ trademarks, service marks, trade name or products in this Presentation is not intended to, and does not imply, a relationship with AMPERA or Berto, or any endorsement or sponsorship by or of AMPERA or Berto. Solely for convenience, the trademarks, service marks and trade names referred to in this Presentation may appear with the TM or SM symbols, but such references are not intended to indicate, in any way, that the Parties will not assert, to the fullest extent permitted under applicable law, their rights or the right of the applicable licensor to these trademarks and trade names. Forward Looking Statements This communication includes “forward - looking statements” with respect to the Parties. The expectations, estimates, and projections of the business of AMPERA and the combined company may differ from its actual results and consequently, you should not rely on these forward - looking statements as predictions of future events. Words such as “expect,” “estimate,” “anticipate,” “intend,” “may,” “will,” “could,” “should,” “potential,” “plan” and similar expressions are intended to identify such forward - looking statements. These forward - looking statements include, without limitation, expectations related to future financial performance, operating results, and technology of AMPERA as well as larger trends in the nuclear industry. These forward - looking statements involve significant risks and uncertainties that could cause the actual results to differ materially from the expected results and are subject to, without limitation, uncertainties as to the timing of the Transactions; the risk that the Transactions may not be completed in a timely manner or at all; the risk that the Transactions may not be completed by Berto’s business combination deadline of May 1, 2027; the failure by the Parties to satisfy the conditions to the consummation of the Transactions, including the approval of Berto’s shareholders; the occurrence of any event, change, or other circumstance that could give rise to the termination of the negotiations or definitive agreements related to the Transactions; changes to the proposed structure of the Transactions that may be required or appropriate as a result of applicable laws or regulations; the effect of the announcement or pendency of the Transactions on AMPERA’s business; and those risk factors discussed in Berto's Annual Report on Form 10 - K for the year ended December 31, 2025, filed with the SEC on March 30, 2026 (“Berto's Annual Report”), a registration statement on Form S - 4 that the Parties intend to file in connection with the Transactions (the “Registration Statement”), and other documents filed or to be filed by the Parties with the SEC, along with (i) known and unknown risks, including the risks and uncertainties set forth in this Presentation under the heading “Risk Factors”, (ii) uncertainties, (iii) assumptions, and (iv) other factors beyond the Parties’ control that are difficult to predict because they relate to events and depend on circumstances that will occur in the future. These forward - looking statements are provided for illustrative purposes only and are not intended to serve as and must not be relied on by an investor as a guarantee, an assurance, a prediction, or a definitive statement of fact or probability . They are neither statements of historical fact nor promises or guarantees of future performance . Therefore, actual results may differ materially and adversely from those expressed or implied in any forward - looking statements and the Parties therefore caution against placing undue reliance on any of these forward - looking statements. The Parties do not undertake or accept any obligation to release publicly any updates or revisions to any forward - looking statements to reflect any change in its expectations or any change in events, conditions, or circumstances on which any such statement is based, except as required by applicable securities laws. You should carefully consider the foregoing factors and the other risks and uncertainties described in the “Risk Factors section of this Presentation, the “Risk Factors” section of Berto’s Annual Report and the Registration Statement (when available). Important Information and Where to Find It In connection with the Transactions, the Parties intend to file relevant materials with the SEC, including the Registration Statement, and after the Registration Statement is declared effective, Berto will mail the proxy statement included therein to holders of Berto’s ordinary shares in connection with Berto’s solicitation of proxies for the vote of Berto’s shareholders with respect to the Transactions. This Presentation is not a substitute for the Registration Statement or any other document that may be filed by the Parties with the SEC. INVESTORS AND SHAREHOLDERS OF BERTO ARE URGED TO READ ALL RELEVANT DOCUMENTS FILED BY EACH OF THE PARTIES WITH THE SEC IN CONNECTION WITH THE TRANSACTIONS, INCLUDING THE REGISTRATION STATEMENT (WHEN THEY ARE AVAILABLE), BECAUSE THEY WILL CONTAIN IMPORTANT INFORMATION ABOUT THE PARTIES AND THE TRANSACTIONS AND RELATED MATTERS. Investors and shareholders are or will be able to obtain these documents (when they are available) free of charge from the SEC's website at www.sec.gov. Participants in Solicitation The Parties and their respective directors, managers, and executive officers may be deemed under SEC rules to be participants in the solicitation of proxies of Berto’s shareholders in connection with the Transactions. Investors and security holders may obtain more detailed information regarding the names and interests of Berto’s directors and officers in Berto’s filings with the SEC, including Berto’s Annual Report under the headings “Directors, Executive Officers and Corporate Governance,” “Executive Compensation,” “Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters,” and “Certain Relationships and Related Transactions, and Director Independence,” which is available at https:// www.sec.gov/Archives/edgar/data/2033122/000182912626002856/bertoacquisition_10k.htm. Information regarding the persons who may, under SEC rules, be deemed participants in the solicitation of proxies of Berto’s shareholders in connection with the Transactions will be set forth in the Registration Statement, when available. Investors, shareholders, and other interested persons are urged to read the Registration Statement, the proxy statement/prospectus included therein, and other relevant documents that will be filed with the SEC carefully and in their entirety when they become available because they will contain important information about the Transactions.

 

 

 

Participants in Solicitation (continued) Investors, shareholders, and other interested persons will be able to obtain free copies of the proxy statement/prospectus and other documents containing important information about the Parties through the website maintained by the SEC at www.sec.gov. Risk Factors Certain Risks Related to AMPERA, Inc. All references to the “Company,” “AMPERA,” “we,” “us” or “our” in this presentation refer to the business of AMPERA, Inc. The risks presented below are certain of the general risks related to the Company’s business, industry and ownership structure and are not exhaustive. The list below is qualified in its entirety by disclosures contained in future filings by the Company, or by third parties with respect to the Company, with the United States Securities and Exchange Commission (“SEC”). These risks speak only as of the date of this presentation and we make no commitment to update such disclosure. The risks disclosed in future filings with the SEC may differ significantly from and will be more extensive than those presented below. • AMPERA's use of AI - based technology may present new risks and challenges to AMPERA's business, including those related to privacy, data use, and security • AMPERA has a limited operating history, which makes it difficult to forecast our future results of operations. • AMPERA may not be able to scale its business quickly enough to meet its customers’ growing needs, and if it is not able to grow efficiently, its operating results could be harmed. • The nuclear energy industry is competitive on a global scale with many countries aspiring to successfully develop sustainable nuclear energy sources. If AMPERA is not able to compete successfully, its business, financial results and future prospects will be harmed. • The nuclear energy industry is in its early stages and is volatile, and if it does not develop, if it develops slower than AMPERA expects, if it develops in a manner that does not require use of AMPERA’s nuclear solutions, if it encounters negative publicity or if AMPERA’s solution does not drive commercial engagement, the growth of its business will be harmed. • Even if AMPERA is successful in developing nuclear solutions and executing its strategy, competitors in the industry may achieve technological breakthroughs which render AMPERA’s nuclear solutions obsolete or inferior to other products. • If AMPERA’s reactors fail to achieve a broad nuclear advantage, or it is delayed in doing so, its business, financial condition and future prospects may be harmed. • AMPERA’s operating and financial results forecast relies in large part upon assumptions and analyses developed by the Company . If these assumptions or analyses prove to be incorrect, AMPERA’s actual operating results may be materially different from its forecasted results . • AMPERA’s estimates of market opportunity and forecasts of market growth may prove to be inaccurate, and even if the market in which it competes achieves the forecasted growth, AMPERA’s business could fail to grow at similar rates, if at all. • AMPERA may be unable to successfully scale up manufacturing of its products in sufficient quantity and quality, in a timely or cost - effective manner, or at all. Unforeseen issues associated with scaling up and constructing nuclear technology at commercially viable levels could negatively impact AMPERA’s business, financial condition and results of operations. • Supply chain issues, including a shortage of adequate component supply or manufacturing capacity, or any political challenges between the United States and countries in which AMPERA suppliers are located could have an adverse impact on its business and operating results. • If AMPERA cannot successfully execute on its strategy, including in response to changing customer needs and new technologies and other market requirements, or achieve its objectives in a timely manner, its business, financial condition and results of operations could be harmed. • AMPERA is highly dependent on its co - founders, and its ability to attract and retain senior management and other key employees, such as nuclear engineers and other key technical employees is critical to its success. If AMPERA is unable to retain talented, highly - qualified senior management, engineers and other key employees or attract them when needed, it could negatively impact its business. • AMPERA's failure to effectively develop and expand its sales and marketing capabilities could harm its ability to increase its customer base and achieve broader market acceptance of its nuclear capabilities. • AMPERA’s reactor designs rely on specialized nuclear fuel and related materials, including thorium - based TRISO fuel manufactured to precise specifications. If AMPERA is unable to procure these materials, or to do so on a timely and cost - effective basis and in sufficient quantities, it may be required to delay development, qualification, or deployment of its reactors, incur higher than expected costs, or make design or operational changes, any of which could adversely affect its business, prospects, financial condition, and results of operations. • System security and data protection breaches, as well as cyber - attacks, could disrupt AMPERA's operations, which may damage AMPERA's reputation and adversely affect its business. • State, federal and foreign laws and regulations related to privacy, data use and security could adversely affect AMPERA. • AMPERA is subject to U.S. and foreign anti - corruption, anti - bribery and similar laws, and non - compliance with such laws can subject us to criminal or civil liability and harm our business. • AMPERA is subject to governmental export and import controls that could impair its ability to compete in international markets due to licensing requirements and be subject to liability if it is not in compliance with applicable laws. • Unfavorable conditions in AMPERA's industry or the global economy could limit the Company’s ability to grow its business and negatively affect its results of operations. • AMPERA is subject to requirements relating to environmental and safety regulations and environmental remediation matters which could adversely affect its business, results of operation and reputation. • AMPERA may need additional capital to pursue its business objectives and respond to business opportunities, challenges or unforeseen circumstances, and it cannot be sure that additional financing will be available. • Acquisitions, divestitures, strategic investments and strategic partnerships could disrupt AMPERA's business and harm its financial condition and operating results. • AMPERA's business is exposed to risks associated with litigation, investigations and regulatory proceedings. • AMPERA's ability to use net operating loss carryforwards and other tax attributes may be limited in connection with the business combination or other ownership changes.

 

 

 

Risk Factors (continued) • If AMPERA is unable to obtain and maintain patent protection for its products and technology, or if the scope of the patent protection obtained is not sufficiently broad or robust, its competitors could develop and commercialize products and technology similar or identical to AMPERA's, and its ability to successfully commercialize its product and technology may be adversely affected. Moreover, the secrecy of AMPERA’s trade secrets could be compromised, which could cause AMPERA to lose the competitive advantage resulting from these trade secrets. • AMPERA's patent applications may not result in issued patents or its patent rights may be contested, circumvented, invalidated or limited in scope, any of which could have a material adverse effect on AMPERA's ability to prevent others from interfering with its commercialization of its products. • AMPERA may face patent infringement and other intellectual property claims that could be costly to defend, result in injunctions and significant damage awards or other costs (including indemnification of third parties or costly licensing arrangements (if licenses are available at all)) and limit our ability to use certain key technologies in the future or require development of non - infringing products, services, or technologies which could result in a significant expenditure and otherwise harm our business. • Following the consummation of the business combination, the combined company will incur significant increased expenses and administrative burdens as a public company, which could negatively impact its business, financial condition and results of operations . • Our success could be impacted by the inability of the parties to successfully or timely consummate the proposed business combination, including the risk that any required regulatory approvals are not obtained, are delayed, or are subject to unanticipated conditions that could adversely affect the combined company or the expected benefits of the proposed business combination or that the approval of the stockholders is not obtained. • If the business combination’s benefits do not meet the expectations of investors or securities analysts, the market price of the public company’s securities or, following the closing, the combined entity’s securities, may decline Certain Risks Related to Berto and the Transactions • There is no assurance that the Transactions will be completed. • Berto’s sponsor and its directors and officers and their affiliates have interests in the Transactions that are different from, or in addition to and/or in conflict with, those of Berto’s shareholders generally, including the fact that Berto’s sponsor and its officers and directors hold a significant number of Berto’s ordinary shares and will lose their entire investment in Berto if an initial business combination is not completed. • The ability of Berto’s public shareholders to exercise redemption rights with respect to a large number of shares could deplete Berto’s trust account prior to the Transactions and thereby diminish the amount of working capital available to the combined company . • Berto’s public shareholders who do not redeem their shares will experience immediate dilution as a consequence of the Transactions. • There is no assurance that the contemplated private capital rise or any other additional financing will be completed. • Berto may be targeted by securities class action and derivative lawsuits that could result in substantial costs and may delay or prevent the Transactions from being completed. • The proposed financing will only be consummated if the Business Combination closes, and the closing of the Business Combination may be subject to a number of closing conditions, some of which may be outside of Berto’s and the Company’s control. • The securities to be issued in the proposed financing will not be registered with the SEC and, prior to such registration cannot be transferred or resold except in a transaction exempt from or not subject to the requirements of the Securities Act and applicable state securities laws. • An active trading market for the combined company’s securities may not be available to provide shareholders with adequate liquidity. The market price of the combined company’s securities may be volatile, and shareholders could lose all or a significant part of their investment. • Berto’s sponsor, officers and directors and others may purchase shares from public shareholders or take other actions, which may influence a vote on the Transactions and reduce the public “float” of Berto’s ordinary shares. • If the expected benefits of the Transactions do not materialize, or do not meet the expectations of investors or securities analysts, the market price of Berto’s securities or, following the closing, the combined company’s securities, may decline. • If Berto is unable to complete an initial business combination by May 1, 2027 (or such later date as may be approved by Berto’s shareholders in accordance with its organizational documents), Berto will cease all operations except for the purpose of winding up, redeem 100% of the outstanding public shares and, subject to the approval of the remaining shareholders and Berto’s board of directors, dissolve and liquidate. If the Transactions are not completed prior to such date, there can be no assurance that Berto will obtain shareholder approval to extend such date. • The combined company will have discretion in how it uses the proceeds of the Transactions and may not use these proceeds effectively, which could affect its results of operations and cause the market price of its securities to decline. • Certain AMPERA shareholders will hold shares of the combined company with supervoting rights following the closing of the Transactions, which will concentrate voting control in those shareholders and could limit the ability of other shareholders, including Berto’s public shareholders, to influence matters submitted to a shareholder vote, and could adversely affect the trading price of the combined company’s securities. • The combined company will have outstanding public warrants and private placement warrants exercisable at $11.50 per share, and the exercise of such warrants would increase the number of the combined company’s securities eligible for future resale, which could result in dilution to existing shareholders and adversely affect the market price of the combined company’s securities.

 

 

 

Factory - built, Modular Energy Systems Highly modular, gas - to - nuclear energy systems that enable future nuclear integration, supporting earlier path to customer engagement PowerNOW – NuclearNEXT Unified Energy Platform will deliver conventional power first and can transition to nuclear once available, first deliveries of conventional power as early as Q3 2027 Attractive Customer Economics Projecting lower cost unit economics for power delivery Vertical Integration Consolidating key elements of AMPERA’s reactor development provides greater control to derisk supply and support earlier commercial readiness Proprietary Technology Innovative, unique source - assisted subcritical architecture, core and fuel systems, sCO 2 power conversion platform, and proprietary manufacturing and fabrication processes (patents pending) Regulatory Tailwinds Early NRC pre - application engagement, a streamlined reactor design, and NPI testing processes support licensing; recent fuel recycling legislation could further support AMPERA’s vision for a closed thorium fuel cycle 1 Strategic Partners Across High - Value End Markets Developing key partnerships with leading companies in data centers, defense, maritime, and industrial markets Capital Efficient, Robust Financial Model deSPAC largely meets capital needs of core platform development and initial commercial scale - up 2 Note: Statements about AMPERA reactor design, operation, and performance are forward - looking and describe planned future capabilities rather than current, licensed reactors. Investment highlights shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied. 1) Nuclear REFUEL (Recycling Efficient Fuels Utilizing Expedited Licensing) Act, H.R. 3978; passed the U.S. House 397 – 2 on November 9, 2026; pending Senate action; 2) See footnote 1 on page 10.

 

 

 

Targeting to close deSPAC in Q1 2027 Business leader with 40+ years of unmatched deep management experience across technology broadly, creating significant shareholder value at Broadcom (Chairman, oversaw acquisition of VMware), IonQ (former Lead Independent Director), EMC (former EVP, Office of the Chairman, who structured Dell’s buyout of EMC), Oracle (former CFO), Accenture (former CFO), BearingPoint (former CEO) ✓ Deep transactional experience ✓ Played key role in structuring Dell’s $67B buyout of EMC and Broadcom’s $92B acquisition of VMware ✓ Has raised hundreds of billions in total capital • Leading franchise with dMY and Berto family of SPACs • Recent and relevant SPAC experience in disruptive tech including IonQ, Planet Labs, Horizon Quantum, Genius Sports and Rush Street Interactive (current average price of ~ $15/share ¹ and peak average price of ~$46/share ) • >$2B in common stock PIPE + trust capital raised since 2020 • Consistent participation from strategic investors in PIPE financings • < 15% average redemption rate for dMY franchise (~2% median) • 100% oversubscribed PIPE raises • Unrivaled market connectivity with leading investors • Focus on beating financial guidance out of the gate Strategic Relationships Operational Excellence Access to Capital Note: No assurances can be made that the proposed transaction will be consummated on the terms or timeframe currently contemplated, or at all. Any transaction would be subject to satisfaction of the conditions negotiated therein, board and equity holder approval, regulatory approvals, and other customary conditions. Past performance is not a guarantee of future performance. 1) Current average share price as of November 13, 2026

 

 

 

Transaction Summary H i g h l i g h ts Valuation • AMPERA valued at $900M pre - money equity value • AMPERA shareholders will roll 100% of their equity and retain ~68% ⁴ Anticipated Use of Proceeds Commercialization & Industrialization Commercialization of Unified Energy Platform and continuing development of nuclear technology Unified Energy Platform R&D Accelerate supercritical CO 2 power module and nuclear technology development Sales & Marketing, Regulatory Engage customers, build the sales force and advance regulatory compliance Strategic Acquisitions Key technology tuck - ins to accelerate the roadmap 1) Common stock PIPE priced at final trust redemption value. 2) Assumes 0% redemptions. Cash in trust as of 9/30/26. 3) Subject to early release after 12 months if stock is greater than $18/share for 30 consecutive trading days. 4) Certain AMPERA shareholders will receive shares with supervoting rights. Note: No assurances can be made that the proposed transaction will be consummated on the terms or timeframe currently contemplated, or at all. Any transaction would be subject to satisfaction of the conditions negotiated therein, board and equity holder approval, regulatory approvals, and other customary conditions. • Transaction includes approximately $30M of a committed common stock PIPE ¹ • In addition to the PIPE, AMPERA has received commitments or closed in excess of $10M of pre - transaction close equity and debt financing, bringing total capital commitments in excess of $40M to date • The PIPE financing and recent investments include several key strategic investors across diversified end markets in which AMPERA intends to sell into, including AI data centers, quantum computing, defense, maritime and industrial sectors • AMPERA to receive up to $347M of new gross cash proceeds at closing inclusive of PIPE and up to $317M of cash in trust ² • AMPERA may seek $50M - $100M of incremental PIPE capital • Certain AMPERA shareholders and Berto sponsor subject to 24 - month lock - up ³ • Transaction expected to close in Q1 2027

 

 

 

Illustrative Pro Forma Valuation ($M) Pro Forma Shares Outstanding 2, 3 1 2 5. 6 ( - ) Net Proceeds (322) Pro Forma Enterprise Value $1,004 Sources and Uses ($M) Uses Sources $322 Cash to Balance Sheet $3 17 Berto Cash in Trust 1, 2 25 Est. Transaction Expenses 5 30 Committed Common Stock PIPE 9 0 0 AMPERA Rollover Equity 4 9 0 0 AMPERA Rollover Equity 4 7 9 Berto Sponsor Rollover Equity 7 9 Berto Sponsor Rollover Equity $1, 3 2 6 Total Uses $1, 3 2 6 Total Sources 2 4 % Illustrative Ownership at Close (#M) 6% % Own # Shares 2% 2.8 PIPE Shareholders 6 2 4% 30.0 Berto Public Shareholders 2 2% 68% 6% 7.5 Berto Sponsor 100% 125.6 Total 3 Note: No assurances can be made that the proposed transaction will be consummated on the terms or timeframe currently contemplated, or at all. Any transaction would be subject to satisfaction of the conditions negotiated therein, board and equity holder approval, regulatory approvals, and other customary conditions. 5) Includes ~$12M of deferred underwriting fees subject to pro rata reduction based on final trust redemptions. 6) All shares issued and priced at the final trust redemption value per share. 1) Cash in trust as of 9/30/26. 2) Assumes 0% redemptions. 3) Excludes 15.0M public warrants and 7.3M private placement warrants with $11.50 strike price. 4) Certain AMPERA shareholders will receive shares with supervoting rights.

 

 

 

Robust Financial Model Projecting rapid growth • Bridge - to - Nuclear model enables earlier revenue generation • Early cash generation derisks investment model • Leveraging attractive unit economics, platform modularity and short deployment timeline to drive strong customer adoption • Target industry leading gross margin profile Capital - light platform development • deSPAC largely meets capital needs of core platform development and initial commercial scale - up 1 Deployment capital converts quickly • PPA unit economics support 1 – 2 year payback • Assumes approximately $9M and $25M unit cost for gas - powered systems and nuclear systems, respectively Self - funding cash flow profile • PPA structure creates long - duration contracted cash flows • Positive EBIT cash targeted in 2031 High Capital Efficiency PPA Model - 30 Year Operating Life Single Unit Economics Year 1 - 2 Year 3 Year 36 Projecting 30 Years Strong Cash Generation Note: Financial projections, payback periods, margins, and unit economics shown are illustrative management estimates based on current assumptions on pricing, costs, capital requirements, deployment timing, and customer adoption; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Assumes 0% redemptions and approximately $30M of committed common stock PIPE, reflecting $347M of gross proceeds at closing.

 

 

 

A compelling investment in nuclear with differentiated PowerNOW strategy targeting critical applications $ 7 ,4 0 0 $6 ,0 0 0 $2,6 0 0 $1 , 88 0 $1 , 5 4 1 $ 9 1 8 $1,004 ⁴ $ 8 , 000 $ 6 , 000 $ 4 , 000 $ 2 , 000 $0 Valuation ($M) Public Companies ¹ Private Companies ² Average ³: $3.3B Sources: FactSet Research Systems, SEC filings, Pitchbook, company investor presentations and press releases 1) Represents enterprise value figures as of November 13, 2026 2) Represents company post - money valuation figures of recent private capital raises 3) Average value represents all peer valuations; excludes AMPERA implied pro forma enterprise value of deSPAC 4) Represents implied pro forma enterprise value of deSPAC 5) Per company disclosures and announcements $2,6 9 5 PowerNOW Conventional Mobile gas System ⁵ turbine Subcritical Lead - cooled fast Liquid metal cooled, fast HTGR Sodium - cooled HTGR HTGR Reactor Type ⁵ 7.5 - 15 200 75 1 10 80 5 Power (MWe) ⁵ 2027 / 2029 2032 2 0 28 2028 2029 2030+ Est. FOAK ⁵ TRISO MOX TRISO TRISO Owned Fuel ⁵

 

 

 

Data Centers Firm, carbon - free baseload for hyperscale compute Defense Energy independence for bases and critical infrastructure Maritime Zero - emissions propulsion for naval and commercial fleets Industrial Reliable on - site power for reshoring and heavy industry Scalable modules to multi - GW AI campuses Deployable microgrids Scalable propulsion and onboard power supply Distributed industrial power Projected US electricity usage outpaces generation (TWh) 7,000 6 , 000 5 , 000 4 , 000 6,819 U s age 5,245 Generation 2024 2035 2035 Projected Shortfall ≈180 GW of new firm capacity needed 1 Usage +64% vs. generation +26%, 2024 – 2035 Deployable anywhere — no grid connection required Note: AMPERA estimates based on publicly available market data, including ICF and NextEra Energy investor presentations (September and December 2025) ; statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Assumes continuous operation of new capacity 2) Pictures depict illustrative AMPERA systems

 

 

 

TM One Unified Energy Platform. Deploy today — transition to advanced nuclear tomorrow Power Now. | Modular Gas - Powered System¹ Nuclear Next. | Modular Nuclear System¹ 01 Gas - powered modules deploy before nuclear licensing is complete 02 P One sCO 2 power block runs on gas or nuclear heat 03 du Nuclear module replaces the gas module Rapid Scaling Factory Production Factory production scales ahead of reactor deployment Leveraging the transition from conventional to nuclear through a standardized energy platform Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Pictures depict an illustrative AMPERA system

 

 

 

Note: Milestones shown are forward - looking and based on current planning assumptions. February 2026 NRC correspondence initiated formal pre - application engagement; the 2027 milestone refers to targeted application submission timing, not regulatory approval. Progress depends on staged regulatory engagement, engineering validation, fuel source availability, prototype testing, topical reports, government - site demonstration, and completion of planned nuclear, neutronic, and thermal analyses. 1) TRISO (TRi - structural ISOtropic fuel): Type of particle fuel where a small fuel kernel is encapsulated in multiple ceramic coating layers to contain fission products and enhance safety Unified Energy Platform accelerates time to nuclear production at scale 20 26 20 27 2 0 28 2 0 29 2 0 3 0 Modular Gas - Powered Systems Modular Nuclear S y s t e ms Q3 – Gas - Powered Pre - Prototype System Q1 – 7.5 MWe Prototype Q2 – Factory Production Q3 – First Gas System Delivery Q1 – Gas - Powered System Production Ramp e or - Targeted Manufacture of First Commercial Nuclear Power Deliveries Q1 – TRISO manu f a c t u r i ng (LLNL) Q3 – Irradiation testing (ORNL) Q3 – Targeted TRISO mass production line established at Tera1

 

 

 

Estimated LCOE of $50 (USD / MWh) • Leverages AMPERA’s proprietary, in - house additive manufacturing technologies Scalable factory model with modular energy systems supports earlier path to customer engagement and mass deployment Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Picture depicts an illustrative AMPERA system • Meet near - term power demand with modular, natural gas – fired PowerNOW systems • Convert industrial waste heat into additional electricity without burning additional fuel • Commencing in 2027, generate revenue from modular, gas - powered systems with AMPERA’s proprietary sCO 2 power conversion systems • ~ 2/3 of the deployed system is common between the gas and nuclear configurations

 

 

 

Conventional Modular Gas - Fired Burner • A modular gas - fired thermal block supplies high - temperature heat to the AMPERA sCO 2 power module • The integrated recuperator, heat exchanger, turbopump and generator are designed to convert this thermal energy into ~7.5 MWe in a compact, transportable architecture Aero - Derived Gas - Turbine Combined Cycle Power System • Intended collaboration with an aerospace consortium to convert jet engines into high efficiency gas turbines using s Power • Its hot exhaust supplies the AMPERA sCO 2 power block, which is expected to add ~15 MWe without additional fuel and targets >50% efficiency Targeted Commercial Availability AMPERA’s gas - fired sCO 2 system is designed to be highly differentiated from best - in - class gas - turbine & diesel generators Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Pictures depict an illustrative AMPERA system A M P - G7 . 5 AMP - G45 Targeted Commercial Availability

 

 

 

Designed to connect a high - temperature heat source to turbine generator, recuperation, cooling and grid - interface modules 200 years in the waiting to replace the traditional steam turbine Rankine cycle with a high - temperature, gas - based Brayton cycle Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Picture depicts an illustrative AMPERA system T U R B O P U M P , G E A R B OX A ND G E NE R A T OR

 

 

 

• Building on 20 years of R&D and 100s of hours of operating data from Echogen • Elevated operating temperatures and pressures relative to Rankine cycles • Accelerated lifetime testing for reliability • Leveraging additive manufacturing + nickel superalloys to operate at higher temperatures 36 î 11 î 12.5 ft Dimensions 115,000 lbs Weight 375 ƒ C TurboPump TIT 250 bar Compressor Outlet Improves system efficiency and reliability, and significantly reduces size through leveraging additive manufacturing Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Picture depicts a pre - production prototype of the sCO 2 system

 

 

 

The world’s first subcritical, solid - state, factory - built thorium nuclear reactor Modular Platform Compact deployment • Proprietary manufacturing and production processes • Fully containerized systems manufactured in parallel production lines Bridge - to - Nuclear PowerNOW NuclearNEXT • Early customer engagement supplying power conversion and transmission systems • Establish customer footprint then swap in nuclear reactor once in production Vertically Integrated Nearly all key elements • Prioritizing in - house fuel production, 3D printing of reactor core, and power conversion system • Seeking greater fuel supply chain and lifecycle control Core - for - Life Targeting up to 30 - year core life • No routine refueling cycles • Helium as primary coolant • Long - life sealed design enhances safety, security, and proliferation resistance Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Picture depicts an illustrative AMPERA reactor system

 

 

 

New enabling technologies make factory - produced thorium reactors a reality Sealed core for life MWe scalable output Efficiency target Core life, no refueling Unique Reactor Core Solid - state, sealed for life • World’s first 3D - printed reactor core • Compact 4.5 ft diameter with shielding • Proprietary gyroid structure with microchannels Accelerator - Driven Subcritical, source - assisted • Requires an external neutron source; cannot self - sustain • Instant on/off and designed to be passively safe • No control rods Thorium Fuel Abundant, low - waste fuel • ~3x more abundant than uranium • Smaller waste footprint than uranium • Lower projected fuel cost than HALEU • Liquid metal jet - printed TRISO kernels Process Innovations Advanced manufacturing • 3D - printed primary heat exchangers, micro - turbines and combustors • Superalloy deposition methods resistant to CO 2 corrosion and high temperatures Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Picture depicts an illustrative AMPERA reactor system 2) HALEU = High - Assay Low - Enriched Uranium

 

 

 

Vertical integration significantly reduces supply chain risk Coated Particle Technology • Partnering with Australian processor as well as other prospective mining companies • Creating long - term availability and supply flexibility • Eliminates enrichment needs for bulk fuel – small HALEU ¹ seed used for startup • Thorium - based fuel cycle and in - core breeding • In - house capability across fuel handling and lifecycle management reduces safeguard requirements and minimizes proliferation risk • Patented Liquid Metal Jetting (LMJ) technology will be used to produce metal powders and highly spherical particles with very high yield and precise size control, expected to lower the cost of TRISO fuel production ² • Plan to create additional recurring revenue stream by providing reactor fuel to other nuclear customers • Target customers include third - party SMR and microreactor companies • Lower dependence on enriched - uranium markets and concentrated suppliers, minimizing geopolitical risk and supply - chain disruption Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied. 1) HALEU = High - Assay Low - Enriched Uranium 2) Exclusive, perpetual license to 66 liquid metal jetting (LMJ) patents for nuclear field - of - use applications

 

 

 

Built with enhanced safety by design Core - for - life Modular Nuclear Systems • Targeting a long - life core of up to 30 years, eliminating routine on - site fuel handling and diversion risk, reducing operator intervention and system complexity • Helium, not water, as the primary coolant transfers heat from the reactor core to the heat exchanger • Power conversion via a high - efficiency closed - loop sCO 2 Brayton cycle Neutron Driver for Subcritical Operation • Integrated neutron driver providing the external neutron flux required to sustain subcritical operation • Reduces reliance on large mechanical control systems Safety is achieved through core design and physics characteristics Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Picture depicts AMPERA’s reactor module

 

 

 

Unique silicon carbide core for enhanced safety and thermal margins • Heat generation within the 3D - printed gyroid structure • Optimized for neutron efficiency, high thermal margin, and uniform heat distribution • Structural integrity and robustness under load and temperature • Orientation - independent performance • Compatible with scalable manufacturing approaches • Leverages proprietary in - house additive manufacturing technologies Complex gyroid geometry enables a monolithic SiC core with built - in cooling channels and high surface area Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Picture depicts a 3D rendering of AMPERA’s monolithic gyroid reactor core structure design

 

 

 

NeuralTwin TM Physics î Data î AI Design optimization Explore core configurations in hours, not weeks Eng i n e e r i ng evidence Every prediction traceable to its model and inputs Operational insight Predicted vs. measured performance, in real time Model r ef i n e m e n t Operating data feeds back into the physics models NeuralTwin TM — physics - grounded intelligence across the energy lifecycle Designed to connect reactor physics, engineering data and AI across the full plant lifecycle Physics first High - fidelity neutron transport and depletion models generate the reference data AI where it adds speed Surrogate models predict k - eff, power distribution and neutron - source demand across fuel burnup, but only within their validated range Traceable evidence Every result records its model version, inputs and uncertainty, building toward regulatory - grade evidence Learning from the fleet PowerNOW operating data trains and tests the twin before Nuclear Next deploys Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties.

 

 

 

Factory - built nuclear systems, delivered as modular infrastructure assets Modular Manufacturing Model Picture depicts illustrative reactor factory Begin Power Module Manufacturing 2027 Targeting 300 systems/year initial capacity Size of single system (footprint per MWe) ~10 m² Repeatable module - based production by design supports quality control and replication Parallel production lines for scalable throughput Modular factory expansion for rapid capacity growth Manufacturing - driven deployment unlocks nuclear energy at industrial scale True Compact Deployment Picture depicts illustrative reactor deployment No CRDM towers or large reactor vessels ¹ Minimal shutdown absorber system; no control - rod motion Reduced vessel height and penetrations enable smaller footprint Fully containerized, transportable system architecture No routine refueling logistics required Removing reliance on control - rod motion enables a fundamentally smaller, shippable reactor system Note: Projected milestone timing shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied. As a result, such milestones are subject to change and may not be achieved in the timeframes described, or at all. 1) CRDM = Control Rod Drive Mechanism

 

 

 

AMPERA’s modularized factory - built platform is designed to compress deployment timelines, support earlier commercial readiness, and accelerate market adoption 1 Factory - Built • Modular infrastructure assets compress time from order to commissioning 2 Bridge - to - Nuclear • Deploy proprietary modular power conversion systems ahead of nuclear deployment to establish customer footprint and recurring revenue 3 In - house Th Fuel Production • Prioritizing in - house production of TRISO fuel to support rapid deployment and scaling 4 Reduces Supply Chain Risk • Factory - built systems and in - house fuel capability reduce reliance on concentrated enriched - uranium supply chains, improving supply security and resilience 5 No Routine On - Site Refueling • Simplifies site operations, reduces fuel - handling complexity, and improves uptime for early customers 6 Innovative Modular Design • Easier to manufacture, transport, and install through a compact, low - complexity design with fewer moving parts 7 Subcritical • Source - assisted architecture design that may support a more streamlined regulatory pathway, accelerated R&D, and earlier deployment Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied.

 

 

 

Target long - term LCOE of ~$20 / MWh enabled by factory - built reactors and an in - house thorium fuel strategy ¹ $2 .1 Wind + Storage On Shore $4 4 $ 1 .5 Natural Gas Combined Cycle $4 8 $ 1 .4 Solar PV + Storage Utility Scale $50 $6 .0 N u c l ear U.S. $ 1 4 1 $ 1 5.0 Fusion $2 00 Sources: Non - company benchmarks based on publicly available third - party data, including Lazard LCOE+ 2025 (low end estimates), U.S. EIA AEO2025, DOE and OECD/NEA advanced nuclear and SMR studies, and peer - reviewed fusion economics; AMPERA values are internal target economics assuming scaled factory - built deployment and are not demonstrated commercial operating data. 1) Estimated from current assumptions: cost reflects Levelized Cost of Energy (LCOE), the average cost to generate 1 MWh over a project’s life, including capital, operations, maintenance, and fuel 2) Estimated, based on current assumptions: $M in capital expenditures investment required to produce 1 Megawatt of Electricity

 

 

 

AMPERA is positioned to lead with a framework that best fits the technology, derisks pre - application engagement, and stays closely aligned with evolving regulation Primary Licensing Strategy • Part 53 licensing strategy paired with a structured pre - application engagement program in 2026 • AMPERA plans to work closely with the NRC well ahead of a formal application • Proactive engagement and targeted submission of full license application projected in Q4 2027 Alternative Pathways • • Note: Projected milestone timing shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied. Pre - application engagement is exploratory and does not imply NRC acceptance, endorsement, or approval; pathway selection and timing remain subject to ongoing evaluation. As a result, such milestones are subject to change and may not be achieved in the timeframes described, or at all.

 

 

 

AMPERA expects to deliver the highest energy density AMPERA Modular Reactor (15 MWe) Small Modular Reactor (~300 MWe) Picture depicts a 3D rendering of AMPERA’s reactor design Picture depicts a 3D rendering of a Small Modular Reactor TIME TO FIRST POWER ¹ < 1 year 5 – 10 years CONSTRUCTION LEAD T I M E < 1 year 5 – 10 years MANUFACTURING M O DEL Factory - built, tested modules Plug - and - play on site On - site construction S C A L A B I L I T Y 15 MWe increments Add units as needed ~300 MWe increments C OO L I N G R E Q U I R E M E NT Air cooled No consumptive water Typically requires water DEPLOYMENT Transportable by trucks/rail/ship Built for speed and flexibility On - site construction Extensive infrastructure Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Represents time from start of construction to power generation

 

 

 

AMPERA compresses deployment timelines by shifting complexity from construction to manufacturing ¹ Time to Deployment ¹ < 1 Year • Factory - built modules with parallel production and site preparation • Minimal on - site construction, enabling rapid installation and commissioning SMRs 5 – 10 years • Only partial modularization, with significant work still completed on - site • Reduced footprint but still site - dependent • Limited production scalability and standardization Conventional Nuclear Reactors 10 – 15 years • Site - specific engineering and customization • Long permitting and construction timelines • Complex, sequential construction processes How AMPERA Differs Modular / Factory - Built Unified Energy Platform Unit Economics Fuel Security Safety and Waste Profile Operational Simplicity Capital Efficiency Proliferation Resistance Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Time to Deployment refers to estimated order - to - commissioning timing, assuming licensing approval and manufacturing readiness; excludes NRC licensing timelines

 

 

 

Founder, CEO and CTO • 30+ years of experience in nuclear engineering, reactor physics, safety analysis and regulatory strategy • Tenured nuclear and additive manufacturing CEO Chief Financial Officer • 30+ years as an accomplished finance executive and CFO • $18B of global operations oversight, M&A, strategy, and joint development Chief Legal Officer • 25+ years of experience providing corporate legal services • Supply chain and legal operations for large public manufacturing companies Chief Operating Officer • 30+ years of executive - level nuclear safety, development and engineering leadership • Ph.D. in nuclear engineering Chief Commercial Officer • 25+ years global experience as a hands - on investor and operator commercializing complex technologies & infrastructure • Ph.D. in Artificial Intelligence and Wharton Fellow VP, Marketing • 20+ years of corporate communications experience for Fortune 200 companies • Led marketing - communications for nuclear fleet across the US

 

 

 

Active discussions for over 20 initial PowerNOW units to address critical power needs of prospective data center, defense, maritime and industrial customers Product Evaluating Customer / Partner Application AMP - G7.5 Edge AI data centers with integrated AI rack cooling s P o w e r sCO 2 bottoming cycle for gas turbines at an LNG compression depot A M P - G 7 . 5 On - site power for a 1 GW data center s P o w e r sCO 2 bottoming cycle integration with gas turbines A M P - G 7 . 5 Off - grid AI data centers & community power for remote sites A M P - G 7 . 5 Market entry partner for Japan A M P - G 7 . 5 Off - grid port power for major US and EU ports A M P - G 7 . 5 Waste heat recovery and remote power for industrial, mining and refining operations s P o w e r Geothermal - powered data center application using sPower bottoming cycle Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. 1) Pipeline reflects active discussions with prospective customers and partners; none constitutes a binding order, and there is no assurance any discussion will result in one. Applications shown are illustrative of potential use cases.

 

 

 

Traditional Nuclear Reactor Scalable Modular Platform Long Deployment Cycles Immediate Deployment Pathway Single Technology Integrated Ecosystem Construction Projects Factory - built Reactors Energy Only Energy + Intelligence Forging a path to energy abundance Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties.

 

 

 

Note: Picture depicts a 3D rendering of AMPERA’s reactor design

 

 

 

 

 

 

Dual - Track Regulatory & Licensing Technical V alid at ion & Testing AMPERA’s licensing path is supported by staged analysis, subsystem testing, material qualification, and ongoing validation data generation before and during NRC review 2026 2027 2028 2029+ • NRC pre - application engagement • Targeted NRC license application submission • Submission of staged technical packages, safety analyses, modeling results, and supporting validation data • NRC review period with ongoing supplemental testing and confirmatory data generation • Pursue DOE authorization and/or government - site permitting pathway • sCO 2 power conversion subsystem and thermal systems testing • Pneumatic and structural subsystem testing • Non - fueled prototype manufacturing validation • Advanced neutronic, thermal - hydraulic, and structural modeling campaigns • AI - native multiphysics simulations and safety - case generation • Internal HPC infrastructure and simulation partners • Continued neutron source development and validation activities • Government - site fueled demonstrator / FOAK testing • Integrated operational validation and confirmatory empirical data generation during NRC review • Additive manufacturing material qualification and reactor material testing • Silicon carbide and structural component validation • Reactor geometry and thermal performance analysis • TRISO fuel development, characterization, coating - process development, and testing activities already underway with RIT and Michigan State University • Planned expansion of research agreements and independent laboratory testing capabilities to accelerate validation and qualification activities • Additional collaboration activities involving LLNL and related technical organizations for fuel characterization, neutron source evaluation, and supporting validation work Note: Milestones shown are forward - looking and based on current planning assumptions. February 2026 NRC correspondence initiated formal pre - application engagement; the 2027 - 2029 milestone refers to targeted application submission timing, not regulatory approval. Progress depends on staged regulatory engagement, engineering validation, fuel source availability, prototype testing, topical reports, government - site demonstration, and completion of planned nuclear, neutronic, and thermal analyses.

 

 

 

NeuralTwin TM development framework for reactor design Geometry and materials Fuel loading and neutron - source input Core performance changes as fuel evolves - the design model must capture both Core design Coupled physics Neutron transport Fuel depletion and thermal feedback Design decisions Power distribution and core lifetime Fuel use and neutron - source demand Faster design, without losing the physics Note: Statements about AMPERA shown are forward - looking, based on current planning assumptions, and prepared on the basis of certain technical, regulatory, financing, market and other assumptions, which may not be satisfied; actual results may differ materially due to regulatory approvals, technical development, manufacturing readiness, site conditions, and other risks and uncertainties. Iterate through the full irradiation history Neural physics AI surrogates Trust & validation

 

 

 

Breeding / thorium breeding – Process in which fertile thorium is converted into fissile uranium - 233 inside a reactor, creating new fuel as the reactor operates DOE – Department of Energy Criticality / critical reactor – State in which each fission event produces on average one more fission, so the nuclear chain reaction is self - sustaining External neutron source – Device or system that supplies neutrons from outside the reactor core to support or control fission in a subcritical reactor Fissile fuel – Nuclear material, such as uranium - 235, plutonium - 239, or uranium - 233, that readily undergoes fission when struck by low - energy neutrons Gen I – IV / Gen V – Labels for generations of nuclear reactors: Gen I – III are existing commercial designs, Gen IV are advanced designs in development, and Gen V refers to emerging next - generation concepts beyond Gen IV Gyroid – Complex, triply periodic 3D minimal surface with a repeating geometry, used here as a high - surface - area structural form inside reactor components HALEU (High - Assay Low - Enriched Uranium) – Uranium enriched to between 5 % and 20 % uranium - 235 , used in some advanced reactors for higher power density and longer core life HPC (high - performance computing) – Large - scale computing infrastructure using clusters of powerful processors to run complex simulations or data - intensive workloads such as AI and scientific modeling Integrated neutron driver – Neutron - producing device integrated with the reactor core to provide the external neutrons needed for source - assisted, subcritical operation LCOE (Levelized Cost of Energy) – Metric that spreads all capital, operating, and fuel costs over a project’s lifetime and divides by total energy produced to give the average cost per unit of electricity LMJ (Liquid Metal Jetting) – AMPERA’s patented manufacturing and cooling approach that uses precisely controlled jets of liquid metal within the reactor system This Glossary explains several terms used in the AMPERA Presentation. The Glossary, as prepared by AMPERA management, is not a comprehensive explanatory document. Shareholders and investors should not unduly rely on it to make investment decisions.

 

 

 

Megawatt electric (MWe) – Unit of electrical power equal to one megawatt (one million watts) of electricity delivered to the grid or load Modular reactor / modularity – Reactor design that uses factory - fabricated modules and standardized components so units can be built, shipped, and installed in a repeatable way Monolithic core – Reactor core built as one integrated structure or block rather than many separately assembled elements, simplifying geometry and interfaces Neutronics – Study and modeling of how neutrons are produced, move, and interact in a reactor, including flux, absorption, and fission behavior NeuralTwin TM – A physics - grounded AI digital twin platform for compact reactor design, validation, manufacture, and operation NPI testing processes – Design development processes and methodologies that will be included in AMPERA’s pre - application regulatory engagement plan with the NRC. Reactor design and testing processes will be submitted with the Final Safety Analysis Report (FSAR) for the manufacturing license, and the FSAR will describe testing and inspection NRC (U.S. Nuclear Regulatory Commission) – Independent U.S. agency that licenses and oversees civilian use of nuclear materials and commercial nuclear power plants Part 50 - 52 / Part 53 / Part 57 – Sections of U.S. nuclear regulations that define alternative licensing frameworks for reactors, including standardized and new risk - informed pathways PIPE (private investment in public equity) – Transaction where a public company sells shares or convertible securities directly to private investors, outside a traditional public offering sCO 2 (supercritical carbon dioxide) – Working fluid state where CO ₂ is held above its critical temperature and pressure and used in compact, high - efficiency power cycles Sealed core – Reactor core designed to operate for long periods without on - site refueling, with fuel sealed inside the unit for its service life SiC (silicon carbide) – Advanced ceramic material with very high temperature and radiation tolerance, used in nuclear applications such as fuel cladding and structural components This Glossary explains several terms used in the AMPERA Presentation. The Glossary, as prepared by AMPERA management, is not a comprehensive explanatory document. Shareholders and investors should not unduly rely on it to make investment decisions.

 

 

 

SMR (small modular reactor) – Nuclear reactor generally 300 MWe or less that uses modular, factory - built components for easier deployment and scalability Solid - state reactor – Reactor concept that eliminates moving core components such as control rods in normal operation, relying on static structures and materials for control and heat removal Source - assisted nuclear – Subcritical reactor approach where an external neutron source is used to initiate and sustain fission, so the core cannot operate without that source SPAC (Special Purpose Acquisition Company) – Publicly listed shell company formed to raise capital and acquire or merge with a private operating business Subcritical reactor / subcriticality – Reactor whose core remains below criticality and cannot sustain a chain reaction without an external neutron source Thorium fuel cycle – Nuclear fuel cycle that uses fertile thorium to breed fissile uranium - 233, enabling long - term use of thorium as a reactor fuel TRISO (TRi - structural ISOtropic fuel) – Type of particle fuel where a small fuel kernel is encapsulated in multiple ceramic coating layers to contain fission products and enhance safety Unified Energy Platform – AMPERA’s modular energy platform is designed to support both conventional and nuclear power generation, which allows customers to generate power from conventional sources before transitioning to nuclear This Glossary explains several terms used in the AMPERA Presentation. The Glossary, as prepared by AMPERA management, is not a comprehensive explanatory document. Shareholders and investors should not unduly rely on it to make investment decisions.

 

Filing Exhibits & Attachments

53 documents

Keep reading