Antimony Resources Corp. (ATMY) (ATMYF) (K8J0) Reports More Massive Antimony-Bearing Stibnite ("Sb") of 21.45% Antimony (Sb) over 1.10 Meters (m) and 15.0% Sb over 0.8 m in a Mineralized Zone of 4.36% Sb over 13.0 m at the Main Zone

Recent financing positions the company to restart drilling with two rigs, with work planned toward a first resource estimate.

Rhea-AI Summary

Antimony Resources (ATMYF) reported additional Bald Hill Main Zone drilling results, including an interval grading 21.45% antimony over 1.10 meters. Hole BHW-26-19 returned a broader interval averaging 4.35% antimony over 13.00 meters and a second interval of 5.35% over 2.80 meters. BHW-26-18 returned 3.01% over 3.45 meters, while BHW-26-16 returned 2.67% over 1.95 meters. The intersections extend higher-grade mineralization south toward the Central Zone.

The company expects to restart drilling in two weeks with two rigs following recent financing. Planned work includes collecting samples for metallurgical testing, which examines mineral processing, and incorporating results into a mineral model for a first resource estimate. The disclosed exploration target is approximately 2.7 million tonnes grading 3%–4% antimony, but insufficient exploration has been completed to define a mineral resource.

10 points · 0 major

PositiveiHow this balance works

How this balance works

Rhea-AI gives every point it takes from this document a weight. Minor counts 1, Moderate 3 and Major 9, so one Major point outweighs several Minor ones. The bar adds up the weights on each side, and when neither side holds more than 65% of the total the balance reads Mixed.

It reads the document as published, with the same rules for every company, and it does not look at what the market expected or at how the stock traded, so a point can be objectively good on a day the stock falls.

Rhea-AI Sentiment measures something else, the tone of the wording.

How the balance worksHow Sentiment works

0 major · 1 point

Hollow bars mark forward-looking points. How the balance works

Positive

• Moderate pointBHW-26-19 broader interval averaged 4.35% antimony over 13.00 meters.
• Minor pointBHW-26-19 intersected 21.45% antimony over 1.10 meters within a broader mineralized interval.
• Minor pointBHW-26-19 second interval averaged 5.35% antimony over 2.80 meters.
• Minor pointBHW-26-18 returned 3.01% antimony over 3.45 meters.
• Minor pointBHW-26-16 returned 2.67% antimony over 1.95 meters.

5 minor points

• Minor pointNew intersections extend higher-grade mineralization south toward the Central Zone.
• Minor point. Forward-looking: it has not happened yet and may not happen.Drilling restart is expected in two weeks with two rigs following recent financing.
• Minor point. Forward-looking: it has not happened yet and may not happen.New drilling information will support a mineral model and first resource estimate.
• Minor point. Forward-looking: it has not happened yet and may not happen.Planned drilling includes representative samples for a metallurgical testing program.
• Minor pointExploration target comprises approximately 2.7 million tonnes grading 3%–4% antimony, a conceptual estimate.

Negative

• Minor point. Forward-looking: it has not happened yet and may not happen.Exploration target remains unconfirmed; insufficient exploration defines no mineral resource, and future delineation is uncertain.

AI-generated analysis. How Rhea-AI works. Not financial advice.

See more from StockTitan in Google Search and AI answers. Adds StockTitan as a preferred source · opens Google

Add on Google Not now

Vancouver, British Columbia--(Newsfile Corp. - October 14, 2026) - Antimony Resources Corp. (CSE: ATMY) (OTCQB: ATMYF) (FSE: K8J0) (the "Company" or "Antimony Resources" or "ATMY") is pleased to announce that it has received additional assay results from drill holes in the Main Zone at Bald Hill Antimony Project. The drill holes are part of the current drill program intended to expand the mineralization in the Main Zone and fill-in gaps in the data in preparation for the production of a Maiden Resource Estimate.

Main Zone

Results continue to be received from drill holes which have been drilled from the west side of the Main Zone with drill holes BHW-26-18 and BHW-26-19 returning high-grade antimony values. We note the high-grade antimony assays in BHW-26-19 include 21.45% Antimony (Sb) over 1.10 m and 15.0% Sb over 0.8 m in a mineralized zone of 4.36% Sb over 13.0 m from 103.0 to 116.0 meters and a second zone 7 meters further down the hole with 5.35% Sb over 3.45 meters from 123.4 to 126.2 meters.

These intersections are located at relatively shallow depths (50 to 150 meters) in the southern part of the main zone and extend the higher-grade mineralization to the south towards the Central Zone.

Table 1: Average Assay Results for Samples from Recently Received Drill Holes BH-W26-16, BHW-26-18 and BHW-26-29, in the Main Zone at Bald Hill.

Assay Summary for Drill Hole BHW-26-16
SAMPLE		FROM			TO				Length			Sb (%)		Au (ppb)			As (%)
2649235		156.55			157.00				0.45			2.89		193			3.34
2649236		157.00			158.00				1.00			0.836		< 5			0.01				Average
2649237		158.00			158.50				0.50			6.13		347			0.5				2.67			% Sb
																					1.95			meters

 

Assay Summary for Drill Hole BHW-26-18
SAMPLE			FROM			TO		Length			Sb (%)				Au (ppb)			As (%)
2649295			55.05			55.30		0.25			13.1				< 5			0.39
2649296			55.30			55.90		0.60			0.46				53			0.15
2649297			55.90			56.10		0.20			8.16				695			1.18
2649298			56.10			56.70		0.60			0.064				532			1.36
2649299			56.70			57.25		0.55			1.98				836			1.21
2649301			57.25			57.80		0.55			1.72				186			0.43
2649302			57.80			58.20		0.40			7.74				349			0.79		Average
2649303			58.20			58.50		0.30			0.093				8			0.04		3.01			%Sb
																				3.45			meters

 

Assay Summary for Drill Hole BHW-26-19 Upper Zone
SAMPLE	FROM			TO			Length			Sb (%)			Au (ppb)			As (%)
2649333	103.40			103.80			0.40			1.52			876			1.3
2649334	103.80			104.25			0.45			32.20			778			1.23			Highlight
2649335	104.25			104.90			0.65			14.00			567			1.52			21.45			% Sb
2649336	104.90			105.90			1.00			1.37			269			1.22			1.10			meters
2649337	105.90			106.90			1.00			2.21			558			2.71
2649338	106.90			107.20			0.30			3.41			1080			1.98
2649339	107.20			108.00			0.80			1.82			539			1.08
2649341	108.00			109.00			1.00			6.15			1640			5.1			Highlight
2649342	109.00			109.65			0.65			15.00			1150			3.31			15.00			% Sb
2649343	109.65			110.45			0.80			0.52			531			1.61			0.80			meters
2649344	110.45			111.40			0.95			5.39			460			2.41
2649345	111.40			112.40			1.00			3.19			460			1.69
2649346	112.40			113.40			1.00			0.56			491			1.43
2649347	113.40			114.40			1.00			0.58			414			1.45
2649348	114.40			115.40			1.00			0.42			84			0.28			Average
2649349	115.40			116.40			1.00			0.08			316			0.56			4.35			% Sb
																			13.00			meters
2649361	123.40			124.20			0.80			0.32			145			0.46
2649362	124.20			124.80			0.60			21.00			1090			1.74
2649363	124.80			125.80			1.00			2.02			610			0.61			Average
2649364	125.80			126.20			0.40			0.25			27			0.03			5.35			% Sb
																			2.80			meters
2649371	130.30			131.30			1.00			0.21			14			0.02
2649372	131.30			131.70			0.40			2.45			290			0.33

 

Note that these are intersected widths, and the true widths are estimated to be about 70% to 80% of these lengths.

Figure 1 below shows the distribution of drill holes in the Main Zone and the extent of the surface projection of mineralization. The mineralization is open to the northwest and southeast and at depth.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8411/319143_fa8f95b8f46f6b54_002full.jpg

Figure 2: Location of Drill Holes BHW-26-16, BHW -26-18 and BHW-26-19. Note: these holes are at the southern end of the Main Zone less than 100 meters from the Central Zone.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/8411/319143_fa8f95b8f46f6b54_003full.jpg

Mr. James Atkinson PGeo, CEO of Antimony Resources, comments: "We continue to receive high-grade antimony results from the Main Zone. These results are from drilling that has been focusing on in-filling gaps in the data by intersecting areas where there was little or no drill information to attempt to develop a more detailed picture of the deposit. This new information will be incorporated into our Mineral Model which will be used to focus further drilling and create a Maiden Resource Estimate. The intersections in drill holes BHW-26-16 and BHw-26-19 are of particular interest because they extend the higher-grade mineralization towards the south in the direction of the Central Zone. Drill hole B26-19 also includes an impressive thickness of 13 meters and repetition of the antimony mineralization with three zones of mineralization in total. With the recent financing we are now positioned to restart drilling at Bald Hill. It is anticipated that we will be able to start in two weeks. We will have two drill rigs to start with the option to expand the program. Part of the drilling will be aimed at collecting samples from representative mineralization to complete a Metallurgical testing program."

QA/QC

Samples from the drilling rigs are transported to our secure Core Handling Facility where they are examined by our geotechnical staff. Once the information on core conditions including RQD, lost core etc. are recorded and the core is confirmed to be intact and orderly it is logged and marked for sampling by our professional geological staff. The marked core for sampling is cut by diamond say one half is returned to the box for safekeeping, and one half is placed in plastic bags. The bags are sealed and placed in larger canvas bags for shipment to the Activation Labs Processing facility in Fredericton where they are crushed and prepared for shipment to the assay lab in Ancaster Ontario. The samples are analyzed using Actlabs Method Code 1E3 Aqua Regia ICPOES for the multi element and Code 1A2 Fire Assay AA for gold.

Quality Assurance and Quality Control (QA/QC) samples are inserted in the sample runs which include a known standard for antimony and gold, a core duplicate, a blank, and a pulp duplicate. Activation Labs also has standard QA/QC protocols which are reported with each assay batch. Activation Laboratories in an internationally accredited assay Laboratory.

Bald Hill Antimony Project - A Project with Significant Antimony Potential

Highlights

• Bald Hill is a well-known, high-grade antimony deposit in southern New Brunswick, Canada.
• Assays indicate that Bald Hill is the highest-grade antimony deposit in North America with mineable grades and widths indicated by drilling.
• Drilling has outlined an antimony deposit in the Main Zone over 600 meters long and to a depth of at least 350 meters. The mineralization is open in all directions.
• Widths of mineralization average 4 to 5 meters and grades average 3% to 4% antimony.
• NI-43-101 Technical Report: The estimated potential quantity and grade of the drilled area from the 2025 Technical Report, which is the target of our exploration, is reported in the Technical Reports approximately 2.7 million tonnes with a grade between 3% and 4% antimony¹. For more details on the Potential of the project as described by the author of the Technical Report please consult the NI43-101 which has been filed on SEDAR. Antimony Resources Corp. has not completed enough work to confirm this estimate. The potential quantity and grade are conceptual in nature as there has been insufficient exploration to define a mineral resource, and it is uncertain if further exploration will result in the target being delineated as a mineral resource.
• Potential to expand based on recently discovered targets and additional claims added to the property to the west, south and east.
• New Zones outlined by Soil Sampling approximately 3 kilometres south of the Main Zone on the newly acquired Second Run Claim.

1. NATIONAL INSTRUMENT 43-101 TECHNICAL REPORT: BALD HILL ANTIMONY PROJECT, SOUTHERN NEW BRUNSWICK, CANADA, NTS 21G/09 Prepared for Antimony Resources March 2, 2026. Prepared By John Langton, M.Sc., P. GEO., JPL GeoServices, Fredericton, New Brunswick, Canada.

The technical contents of this news release were reviewed and approved by Jim Atkinson, MSc., P. Geo., President and CEO of Antimony Resources Corp. who is a qualified person as defined by National Instrument 43-101.

About Antimony Resources Corp. (CSE: ATMY) (OTCQB: ATMYF) (FSE: K8J0)

Antimony Resources Corp. is an exploration and development company focused exclusively on Antimony. The Company's management team possesses extensive experience in financing, exploration, development and mining. The Company is focused on becoming a significant North American producer of antimony.

www.antimonyresources.ca

On Behalf of the Board of Directors
Jim Atkinson, CEO and President
For further information please contact:
Anthony Simone, President, Simone Capital Inc.
416-881-5154, asimone@simonecapital.ca

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/319143

FAQ

AI-generated questions and answers. How Rhea-AI works. Not financial advice.

What did Antimony Resources ATMYF report from Bald Hill hole BHW-26-19?

BHW-26-19 returned 21.45% antimony over 1.10 meters within a broader interval averaging 4.35% over 13.00 meters. A second interval averaged 5.35% antimony over 2.80 meters.

When does Antimony Resources ATMYF expect to restart Bald Hill drilling?

The company expects drilling to restart in two weeks, initially using two rigs with an option to expand the program. Part of the planned drilling will collect representative mineralization samples for metallurgical testing.

Are Antimony Resources Bald Hill drill intervals true mineralized widths?

The reported intervals are intersected widths, not true widths. True widths are estimated to be about 70% to 80% of the reported lengths.