3D Systems Announces Major Milestone in Digital Dentistry with Full Commercial Release of New FDA-cleared Denture Solution
3D Systems (NYSE:DDD) has announced the full commercial release of its FDA-cleared NextDent® Jetted Denture Solution for the U.S. market. The groundbreaking solution features the new NextDent 300 MultiJet 3D printer and proprietary materials that enable single-piece, multi-material denture production with no post-curing requirements.
The solution delivers 300% faster production compared to traditional methods and 120% faster than existing resin printers. Key innovations include FDA-cleared NextDent® Jet Teeth and NextDent® Jet Base materials, offering superior aesthetics and breakage resistance. The U.S. dental replacement market is projected to reach $600 million by 2029, representing one-third of the global market opportunity.
Initial shipments are scheduled for August 2025, with European and Asian releases pending regulatory approvals. Beta testing has received strong endorsements from leading dental labs, highlighting significant improvements in efficiency, cost-effectiveness, and product quality.
3D Systems (NYSE:DDD) ha annunciato il lancio commerciale completo della sua soluzione NextDent® Jetted Denture Solution, approvata dalla FDA, per il mercato statunitense. Questa innovativa soluzione include la nuova stampante 3D NextDent 300 MultiJet e materiali proprietari che consentono la produzione di dentiere monopezzo e multi-materiale senza necessità di post-polimerizzazione.
La soluzione garantisce una produzione 300% più veloce rispetto ai metodi tradizionali e 120% più rapida rispetto alle stampanti a resina esistenti. Tra le innovazioni principali vi sono i materiali NextDent® Jet Teeth e NextDent® Jet Base, approvati dalla FDA, che offrono estetica superiore e maggiore resistenza alla rottura. Il mercato statunitense delle protesi dentarie è previsto raggiungere un valore di 600 milioni di dollari entro il 2029, rappresentando un terzo dell’opportunità globale.
Le prime spedizioni sono programmate per agosto 2025, mentre i lanci in Europa e Asia dipendono dalle approvazioni regolatorie. I test beta hanno ricevuto forti apprezzamenti dai principali laboratori odontotecnici, sottolineando miglioramenti significativi in termini di efficienza, rapporto qualità-prezzo e qualità del prodotto.
3D Systems (NYSE:DDD) ha anunciado el lanzamiento comercial completo de su solución NextDent® Jetted Denture Solution, aprobada por la FDA, para el mercado estadounidense. Esta innovadora solución incluye la nueva impresora 3D NextDent 300 MultiJet y materiales patentados que permiten la producción de dentaduras monobloque y multicomponente sin necesidad de post-curado.
La solución ofrece una producción 300% más rápida en comparación con los métodos tradicionales y 120% más rápida que las impresoras de resina existentes. Entre las innovaciones clave están los materiales aprobados por la FDA NextDent® Jet Teeth y NextDent® Jet Base, que brindan una estética superior y mayor resistencia a la rotura. Se proyecta que el mercado estadounidense de reemplazo dental alcance los 600 millones de dólares para 2029, representando un tercio de la oportunidad global.
Los envíos iniciales están programados para agosto de 2025, mientras que los lanzamientos en Europa y Asia están pendientes de aprobaciones regulatorias. Las pruebas beta han recibido fuertes elogios de los principales laboratorios dentales, destacando mejoras significativas en eficiencia, rentabilidad y calidad del producto.
3D Systems (NYSE:DDD)가 FDA 승인된 NextDent® Jetted Denture Solution의 미국 시장 완전 상용 출시를 발표했습니다. 이 획기적인 솔루션은 새로운 NextDent 300 MultiJet 3D 프린터와 독자적인 소재를 포함하여 후경화 과정 없이 단일 부품 다중 소재 의치를 제작할 수 있습니다.
이 솔루션은 기존 방식보다 생산 속도가 300% 빠르며, 기존 수지 프린터보다 120% 더 빠릅니다. 주요 혁신 요소로는 FDA 승인된 NextDent® Jet Teeth 및 NextDent® Jet Base 소재가 있어 뛰어난 미적 품질과 내파손성을 제공합니다. 미국 치과 보철 시장은 2029년까지 6억 달러에 이를 것으로 예상되며, 이는 전 세계 시장 기회의 3분의 1에 해당합니다.
초기 출하는 2025년 8월로 예정되어 있으며, 유럽 및 아시아 출시 일정은 규제 승인에 따라 결정됩니다. 베타 테스트는 주요 치과 실험실로부터 높은 평가를 받았으며, 효율성, 비용 효과성, 제품 품질에서 큰 개선을 보여주었습니다.
3D Systems (NYSE:DDD) a annoncé le lancement commercial complet de sa solution NextDent® Jetted Denture Solution, approuvée par la FDA, pour le marché américain. Cette solution innovante comprend la nouvelle imprimante 3D NextDent 300 MultiJet et des matériaux exclusifs permettant la production de prothèses dentaires monoblocs et multi-matériaux sans nécessiter de post-polymérisation.
La solution offre une production 300 % plus rapide comparée aux méthodes traditionnelles et 120 % plus rapide que les imprimantes à résine existantes. Les innovations clés incluent les matériaux approuvés par la FDA NextDent® Jet Teeth et NextDent® Jet Base, qui offrent une esthétique supérieure et une meilleure résistance à la casse. Le marché américain des prothèses dentaires devrait atteindre 600 millions de dollars d'ici 2029, représentant un tiers de l'opportunité mondiale.
Les premières livraisons sont prévues pour août 2025, tandis que les lancements en Europe et en Asie dépendent des approbations réglementaires. Les tests bêta ont reçu d’excellents retours des principaux laboratoires dentaires, soulignant des améliorations significatives en termes d’efficacité, de rentabilité et de qualité des produits.
3D Systems (NYSE:DDD) hat die vollständige kommerzielle Markteinführung seiner von der FDA zugelassenen NextDent® Jetted Denture Solution für den US-Markt angekündigt. Die bahnbrechende Lösung umfasst den neuen NextDent 300 MultiJet 3D-Drucker und proprietäre Materialien, die die Herstellung von einteiligen, mehrmaterialigen Zahnprothesen ohne Nachhärtung ermöglichen.
Die Lösung bietet eine 300% schnellere Produktion im Vergleich zu herkömmlichen Methoden und ist 120% schneller als bestehende Harzdrucker. Zu den wichtigsten Innovationen zählen die von der FDA zugelassenen Materialien NextDent® Jet Teeth und NextDent® Jet Base, die überlegene Ästhetik und Bruchfestigkeit bieten. Der US-Markt für Zahnprothesen wird bis 2029 voraussichtlich 600 Millionen US-Dollar erreichen, was ein Drittel der globalen Marktchance ausmacht.
Die ersten Lieferungen sind für August 2025 geplant, während die Markteinführungen in Europa und Asien von behördlichen Genehmigungen abhängen. Die Beta-Tests wurden von führenden Dentallaboren stark gelobt und hoben erhebliche Verbesserungen in Effizienz, Kosteneffektivität und Produktqualität hervor.
- FDA clearance received for revolutionary single-piece denture solution
- Production speed increased by 300% compared to traditional methods
- 50% reduction in manual labor requirements
- Superior product durability with break-resistant materials
- Significant market opportunity with $600M U.S. addressable market by 2029
- Strong beta testing results with multiple customer endorsements
- No post-curing steps required, improving efficiency
- European and Asian market releases delayed pending regulatory approvals
- Significant capital investment required for dental labs to adopt the technology
Insights
3D Systems' FDA-cleared denture solution brings 300% efficiency boost to labs with breakthrough single-piece printing technology addressing a $600M market.
3D Systems has achieved a significant technological breakthrough with its NextDent® Jetted Denture Solution, now fully commercialized for the U.S. market after receiving FDA clearance. This innovation represents a paradigm shift in dental prosthetics manufacturing by enabling single-piece, multi-material dentures in one printing process—eliminating the traditional need to separately produce and assemble denture bases and teeth.
What makes this technology exceptional is the combination of the NextDent 300 MultiJet 3D printer with two specialized FDA-cleared materials: NextDent® Jet Teeth and NextDent® Jet Base. The solution delivers three critical advantages simultaneously: aesthetic quality matching traditional dentures, superior durability (dentures bounce rather than shatter when dropped), and dramatic production efficiency.
The quantifiable benefits are compelling. Beta testing shows the digital workflow reduces manufacturing time from five days to just one day, requires 50% less manual labor than traditional methods, and achieves workflow efficiency improvements of up to 300% compared to analog processes (120% faster than current two-part 3D printing methods). These improvements fundamentally transform the economics of denture production.
This release strengthens 3D Systems' position in the dental market across all four pillars of their strategy: straighten, protect, repair, and replace. The 'replacement' segment alone—which this product addresses—represents a $600 million U.S. market opportunity by 2029 (approximately one-third of the global market). The total addressable U.S. dental market across all four pillars approaches $1 billion.
With initial shipments scheduled for August 2025 and international releases pending regulatory approvals, this solution positions 3D Systems to capture significant market share in the rapidly growing digital dentistry segment while delivering measurable value to dental labs, professionals, and ultimately patients.
- Company’s technology redefines dental prosthetics with revolutionary single-piece, multi-material dentures delivering distinctive combination of exquisite aesthetics, comfort and outstanding resistance to breakage for enhanced patient experience
- NextDent® Jetted Denture Solution validated with strong endorsements from beta customers highlighting effortless usability, unmatched material properties and ground-breaking efficiency improvements of up to
300% - Commercial availability for the U.S. market significantly expands Company’s market-leading digital dentistry portfolio addressing straightening, protection, repair, replacement of teeth
- 3D Systems’ solutions for the ‘replacement’ market are integral to its dental strategy, as the U.S. market is expected to reach
$600 million by 2029
ROCK HILL, S.C., July 29, 2025 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE: DDD) announced full commercial release of its NextDent® Jetted Denture Solution for the U.S. market. This first-to-market solution for jetted, monolithic (one-piece) dentures utilizes multiple materials in a single printing process to deliver a durable, long-wear, aesthetically beautiful prosthetic to the patient. This results in a faster, more cost-effective and highly scalable alternative to traditional denture fabrication, enabling both an outstanding patient experience and a strong return on investment for dental labs that provide these products to dental professionals each day.
As summarized by 3D Systems’ President and CEO, Dr. Jeffrey Graves, “Our consistent investment in this revolutionary dental technology has culminated in an outstanding denture product, delivered to the patient much faster and with better manufacturing economics, to meet the rapidly growing demand for essential dental care over a patient’s entire lifetime. FDA-cleared, and manufactured to the highest quality standards, dental professionals can stand behind this product with the confidence that they are providing the best care in meeting their patients’ unique needs each day.”
Foundational to 3D Systems’ NextDent Jetted Denture Solution is the new NextDent 300 MultiJet 3D printer. This unique printer enables rapid production of patient-specific dentures that are fully cured and safe to handle without the need for additional post-curing steps. To complement the NextDent 300, 3D Systems’ materials scientists developed two very special dental materials, NextDent® Jet Teeth and NextDent® Jet Base. When used in the NextDent 300 printer, these FDA-cleared materials deliver the desired tooth rigidity and gum support, with both having outstanding aesthetics, along with a denture toughness that helps assure dental professionals and patients alike that the dentures will not experience premature failure due to an unexpected drop in the sink or on the floor when removed.
From a manufacturing standpoint, the ability to produce these single-piece, dual material dentures in a continuous flow print process, with no post-print curing required, provides unparalleled production speeds and efficiencies, resulting in shorter lead times and a greatly enhanced return on investment compared to traditional manufacturing methods, or even other 3D printing technologies that are in the market today.
“It’s rewarding for our team to see our complete NextDent Jetted Denture Solution officially in the market,” said Stijn Hanssen, director, dental solutions, 3D Systems. “3D Systems is known as a pioneer in digital dentistry solutions. Our monolithic jetted denture solution is a truly unique market offering, fusing innovative materials, 3D printing technology, software, and applications expertise. This complete workflow is engineered for high-volume production, providing unparalleled accuracy and repeatability at a lower total cost of operation. Throughout our extensive beta testing, we’re seeing our manufacturing customers produce a full one-piece denture solution with over
Over the last few months, 3D Systems previewed the full Jetted Denture Solution with select leading dental labs in the United States, receiving high praise from these seasoned providers. With this beta testing now complete, the Company is taking orders in the U.S. for the NextDent 300 printer, which will be manufactured in its state-of-the-art South Carolina manufacturing operations. The first units are targeted for shipment in August 2025. European and Asian market releases are anticipated to follow, once the regional regulatory approvals are fully complete.
“After trying the new NextDent 300, I cannot see the future of any dental lab without one of these in each and every one,” said Joshua Williams, general manager, GPS DIGITAL RPD. “From my perspective, this printer checks all the boxes twice. You save so much time not having to assemble your dentures in multiple parts, and don’t need to use caustic solutions to post-process them. The NextDent Jet Teeth and NextDent Jet Base materials have so many color options to give a great life-like appearance. Most importantly, the finished dentures bounce when dropped in the sink as opposed to shattering. 3D Systems makes it so easy with supports that melt off and a simple dust free wash to remove the bit of residue before pumice and polish. We produced a batch of 15 dentures and found this workflow to be very streamlined—
Joshua Jakson, president, Evolve Dentistry, commented, “As the use of digital dentistry workflows continues to accelerate, digitally fabricating dentures using 3D printing technology is becoming the standard mode of manufacturing. For Evolve Dentistry, it is important for us to stay consistent and have a process that we can truly scale with. Because of the NextDent 300’s post-processing workflow, we are able to make sure that we nail the mark every single time. The consistency of the printer is outstanding! We have had no failures so far, and the materials are next level compared to competitive materials on the market. Our clientele completely notices the difference. We are looking forward to a long collaboration with 3D Systems and are excited to see where the future will take us.”
According to Robert Savage, Jr., CEO & president, Drake Dental Lab, “3D Systems’ latest digital dentistry solution offers reduced fabrication time, strong labor savings, and straightforward post-processing and final finishing. The easy-to-use workflow simplifies the process for denture production, thus enabling our technical team to focus their efforts on the production of more complex devices. The NextDent Jetted Denture Solution is streamlined for modern denture production."
"Our lab has been an early adopter of both NextDent and competitor 3D-printed monolithic denture products,” said Dr. William Gianni, CEO, Kainos Dental Technologies, LLC. “The NextDent Jetted Denture Solution delivers the ‘Future-Today’ for 3D-printed monolithic dentures. We are seeing increased efficiency and productivity due to reduced post-processing times, thus reducing labor costs. We have also enhanced the experience for the doctors with whom we work due to faster service, denture personalization, and high fracture-resistance materials. Finally, using this integrated system has improved our employees’ experience as it does not require them to use slow post-processing equipment or interact with potentially hazardous solutions. They also love the new skill development of being on the forefront of the ‘Future-Today.’ We look forward to a long-term relationship with the 3D Systems team. For decades they have been pioneers in the 3D printing industry and this experience shows in the NextDent product!”
3D Systems’ NextDent Jetted Denture Solution is the latest addition to the Company’s market-leading solution portfolio intended to address all major facets of dentistry to straighten, protect, repair and replace teeth. This is the broadest portfolio available from any additive manufacturing solutions provider. According to internal market estimates, applications for the ‘replacement’ pillar of 3D Systems’ dental strategy in the United States alone represent an approximately
For more information on 3D Systems’ NextDent Jetted Denture Solution, please visit the Company’s website.
Forward-Looking Statements
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward-looking statements can be identified by terms such as "believes," "belief," "expects," "may," "will," "estimates," "intends," "anticipates" or "plans" or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions, and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings "Forward-Looking Statements" and "Risk Factors" in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise, except as required by law.
About 3D Systems
For nearly 40 years, Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future. More information on the company is available at www.3dsystems.com.
| Investor Contact: | investor.relations@3dsystems.com |
| Media Contact: | press@3dsystems.com |
Photos accompanying this announcement are available at:
https://www.globenewswire.com/NewsRoom/AttachmentNg/1ab62c18-bcc4-4e98-973d-02abe865d811
https://www.globenewswire.com/NewsRoom/AttachmentNg/3d283c73-7f12-474a-be6c-f80b01d4f7c1
FAQ
What is the NextDent® Jetted Denture Solution by 3D Systems (NYSE:DDD)?
How much faster is 3D Systems' new denture production compared to traditional methods?
What is the market size for dental replacement solutions in the United States?
When will 3D Systems' NextDent® Jetted Denture Solution be available?
What are the key benefits of 3D Systems' new denture solution for dental labs?
