Endurance Reports Additional High-Grade from Expanding Crown Zone 8.01 gpt Gold over 10.5 Metres
Endurance Gold (OTCQB: ENDGF) has reported significant drill results from three holes at the Crown Zone of its Reliance Gold Project. The highlight intersection came from drill hole DDH25-116, which returned 8.01 gpt gold over 10.5 metres. A key discovery was made in hole DDH25-115, which intersected a new mineralized footwall zone in ultramafic rocks, returning 6.60 gpt gold over 2.4 metres.
The Crown Zone expansion continues between the Imperial and Eagle Zones, with 10 out of 15 drill holes showing significant gold and antimony mineralization. The 2025 diamond drilling program has completed 16 holes totaling 5,750 metres, with results pending for 7 holes. The company is also conducting mineral resource modeling, metallurgical testing, and extensive soil sampling with over 1,500 soil samples and 150 rock samples collected to date.
Endurance Gold (OTCQB: ENDGF) ha comunicato risultati significativi da tre fori di sondaggio nella Crown Zone del progetto Reliance. L'intersezione di punta è stata nel foro DDH25-116, con 8,01 g/t d'oro su 10,5 metri. Una scoperta importante è emersa nel foro DDH25-115, che ha intercettato una nuova zona mineralizzata di footwall in rocce ultramafiche, con 6,60 g/t d'oro su 2,4 metri.
L'espansione della Crown Zone prosegue tra le zone Imperial ed Eagle: 10 dei 15 fori mostrano mineralizzazione significativa di oro e antimonio. Il programma di perforazione diamantata 2025 ha completato 16 fori per un totale di 5.750 metri, con i risultati di 7 fori ancora in attesa. L'azienda sta inoltre eseguendo modellazione della risorsa minerale, test metallurgici e un'ampia campagna di campionamento del suolo, avendo raccolto finora oltre 1.500 campioni di suolo e 150 campioni di roccia.
Endurance Gold (OTCQB: ENDGF) ha informado resultados significativos de tres perforaciones en la Crown Zone de su proyecto Reliance. La intersección destacada provino del pozo DDH25-116, que arrojó 8,01 g/t de oro sobre 10,5 metros. Un hallazgo clave se registró en el pozo DDH25-115, que interceptó una nueva zona mineralizada de pared de pie en rocas ultramáficas, con 6,60 g/t de oro sobre 2,4 metros.
La expansión de la Crown Zone continúa entre las zonas Imperial y Eagle, con 10 de las 15 perforaciones mostrando mineralización significativa de oro y antimonio. El programa de perforación diamante 2025 ha completado 16 pozos por un total de 5.750 metros, con resultados pendientes para 7 perforaciones. La compañía también está llevando a cabo modelado de recursos minerales, pruebas metalúrgicas y muestreo extensivo de suelos, con más de 1.500 muestras de suelo y 150 muestras de roca recolectadas hasta la fecha.
Endurance Gold (OTCQB: ENDGF)는 Reliance 광산 프로젝트의 Crown Zone에서 세 개 구멍에 대한 의미 있는 시추 결과를 보고했습니다. 가장 주목할 만한 교차 구간은 DDH25-116 구멍으로, 10.5미터 구간에서 8.01 g/t 금을 기록했습니다. 중요한 발견은 DDH25-115 구멍에서 나왔으며, 초염기성암 내의 새로운 광화된 풋월 영역을 관통해 2.4미터 구간에서 6.60 g/t 금을 보였습니다.
Crown Zone의 확장은 Imperial과 Eagle 구역 사이에서 계속되고 있으며, 15개 시추 중 10개에서 금과 안티모니의 유의한 광화가 확인되었습니다. 2025년 다이아몬드 시추 프로그램은 총 5,750미터, 16개 구멍을 완료했으며 7개 구멍의 결과는 대기 중입니다. 회사는 또한 광상 모델링, 야금학적 테스트 및 광범위한 토양 시료 조사를 진행 중이며 현재까지 1,500개 이상의 토양 시료와 150개의 암석 시료를 수집했습니다.
Endurance Gold (OTCQB: ENDGF) a annoncé des résultats de forage significatifs provenant de trois trous dans la Crown Zone de son projet Reliance. L'intersection la plus notable provient du trou DDH25-116, avec 8,01 g/t d'or sur 10,5 mètres. Une découverte clé a été faite dans le trou DDH25-115, qui a intercepté une nouvelle zone minéralisée de footwall dans des roches ultramafiques, avec 6,60 g/t d'or sur 2,4 mètres.
L'expansion de la Crown Zone se poursuit entre les zones Imperial et Eagle, 10 des 15 forages montrant une minéralisation significative en or et en antimoine. Le programme de forage diamanté 2025 a achevé 16 trous pour un total de 5 750 mètres, les résultats de 7 trous étant en attente. La société réalise également la modélisation des ressources minérales, des essais métallurgiques et un vaste échantillonnage des sols, avec plus de 1 500 échantillons de sol et 150 échantillons de roche prélevés à ce jour.
Endurance Gold (OTCQB: ENDGF) hat bedeutende Bohrergebnisse aus drei Löchern in der Crown Zone seines Reliance-Goldprojekts gemeldet. Die hervorstechende Vererzung stammte aus Bohrloch DDH25-116 mit 8,01 g/t Gold über 10,5 Meter. Eine wichtige Entdeckung gelang in DDH25-115, das eine neue mineralisierte Fußwandzone in ultramafischen Gesteinen durchteufte und 6,60 g/t Gold über 2,4 Meter lieferte.
Die Ausdehnung der Crown Zone zwischen den Zonen Imperial und Eagle schreitet voran: 10 von 15 Bohrlöchern zeigen signifikante Gold- und Antimonvererzungen. Das Diamantbohrprogramm 2025 hat 16 Löcher mit insgesamt 5.750 Metern abgeschlossen; die Resultate von 7 Löchern stehen noch aus. Zudem führt das Unternehmen Ressourcenmodellierung, metallurgische Tests und umfangreiche Bodenprobenahmen durch und hat bisher über 1.500 Bodenproben und 150 Gesteinsproben gesammelt.
- Strong gold mineralization with highlight intersection of 8.01 gpt gold over 10.5 metres
- Discovery of new mineralized footwall zone in ultramafic rocks
- 10 out of 15 drill holes showing significant gold and antimony mineralization
- Successful expansion of Crown Zone with multiple high-grade intersections
- One drill hole had to be abandoned before reaching target depth
Vancouver, British Columbia--(Newsfile Corp. - September 8, 2025) - Endurance Gold Corporation (TSXV: EDG) (OTCQB: ENDGF) (FSE: 3EG) (the "Company") is pleased to announce assay results for three (3) additional drill holes from the Crown Zone at its Reliance Gold Project. All three (3) drill holes intersected strong gold mineralization hosted in the Royal Shear contact, and one of the holes intersected a new mineralized footwall zone hosted within ultramafic rocks. The highlight drill hole DDH25-116 returned 8.01 grams per tonne ("gpt") gold over 10.5 metres ("m"). Highlights include:
- The Crown Zone continues to grow with further encouraging results from the previously undrilled gap located between the Imperial and Eagle Zones. The three (3) drill holes reported have intersected gold mineralization and associated strong ankerite alteration along the Royal Shear host structure located primarily at the contact between sedimentary and mafic volcanics.
- Drill hole DDH25-116 returned 8.01 gpt gold over 10.5 m, including 15.12 gpt gold over 2.9 m from the Royal Shear contact. The hole is a 36-m step-out along strike to the northwest of the Lower Crown discovery hole DDH24-103 (7.61 gpt gold over 5.7 m).
- Drill hole DDH25-115 returned 5.46 gpt gold over 2.4 m, including 8.08 gpt gold over 1.1 m intersecting the mineralized Royal Shear contact 50 m down-dip of hole DDH24-103. The hole was extended to a 500 m depth to test for potential deeper, subparallel structures similar to the Lower Imperial structure intersected in DDH24-106 (4.47 gpt gold over 15.3 m, including 7.18 gpt gold over 8.3 m).
- Hole DDH25-115 successfully intersected a mineralized ultramafic rock unit in contact with a footwall chert sequence at a downhole depth of 418.7 m. The mineralized ultramafic returned 6.60 gpt gold over 2.4 m, including 9.38 gpt gold over 1.6 m.
- Drill hole DDH25-114 was designed to further test the undrilled gap between Lower Crown and Imperial. The hole intersected the Royal Shear contact 100 m from Lower Crown hole DDH24-103 and 50 m from Imperial hole DDH23-065 (8.98 gpt gold over 9.3 m).
- Hole DDH25-114 returned 1.17 gpt gold over 4.5 m, including an antimony-rich vein that returned 3.47 gpt gold and
4.4% antimony over 0.5 m. Management is encouraged by this initial drill hole and will design further holes to test this 150 m undrilled gap.
- Hole DDH25-114 returned 1.17 gpt gold over 4.5 m, including an antimony-rich vein that returned 3.47 gpt gold and
"Testing of the Crown Gap is demonstrating potential for a wider shallow plunging portion of Royal Shear mineralized trend that is continuous between Imperial and the Lower Crown target areas and open to expansion along the plunge trend and at depth," stated Robert T. Boyd, President & CEO of Endurance Gold Corporation. "In this area we have also intersected a significant antimony enriched portion of the Royal Shear with several higher grade antimony intersections including previously reported DDH25-113 that returned the best grade over width for antimony to date at Reliance."
Ten (10) of Fifteen (15) drill holes from the "Crown Gap" completed to date have returned significant gold and antimony mineralization. In addition to hosting mineralization along the Royal Shear structure, Crown Zone holes have consistently intersected narrow (sub-metre) high-grade quartz-carbonate veins that have occasionally exhibited visible gold (such as in DDH23-078, DDH24-093 and DDH24-103).
The 2025 diamond drilling program has sixteen (16) holes completed to date for a total of 5,750 m drilled. Assay results are pending for seven (7) completed holes with an eighth hole being abandoned before reaching target depth. Additional drill testing of the Crown Gap is in progress. The drilling rig is currently testing near-surface targets up-dip of the Lower Crown discovery hole DDH24-103 (7.61 gpt gold over 5.7 m).
All drill assay results are reported as core length intervals. True composite widths are estimated at
In other ongoing activities, mineral resource modeling is in progress and metallurgical testwork is in progress at the Blue Coast Research laboratory. Prospecting, geological mapping and soil sampling have continued through September on the eastern Olympic structures, and the southeast extension of the Royal Shear Trend. Over 1,500 soil samples and 150 rock samples have been collected to date.
Endurance Gold Corporation is a company focused on the acquisition, exploration and development of highly prospective North American mineral properties.
ENDURANCE GOLD CORPORATION
Robert T. Boyd, President & CEO
FOR FURTHER INFORMATION, PLEASE CONTACT
Endurance Gold Corporation www.endurancegold.com
Toll Free: (877) 624 2237, info@endurancegold.com
Diamond drill core was logged and evaluated on the Property and samples designated for assay analysis under the supervision of a geologist at the property. Drilling was completed with HQ and NQ size tools capable of collecting 6.35 and 4.76 centimetre diameter core (respectively). Drill core was cut using a diamond saw with one half of the core sent for analysis and the remaining kept for future studies. All drill core samples have been submitted to ALS Global in North Vancouver, BC, an ISO/IEC 17025:2017 accredited laboratory, where they are crushed to
Endurance Gold monitors QA/QC by inserting blanks, certified standards and pulp duplicates into the sample stream. The work program is supervised by Darren O'Brien, P.Geo., Vice President Exploration for the Company and the qualified person as defined in National Instrument 43-101. Mr. O'Brien has reviewed and approved this news release.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. This news release may contain forward looking statements based on assumptions and judgments of management regarding future events or results that may prove to be inaccurate as a result of factors beyond its control, and actual results may differ materially from the expected results.
Figure 1: Reliance Property – 2025 Royal Shear Drill Plan Map – Crown Gap Target Area
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4976/265444_7095356ec458eb9f_002full.jpg
Figure 2: Reliance Property - Royal Shear Inclined Longitudinal – 2025 Drill Targeting Areas
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4976/265444_7095356ec458eb9f_003full.jpg
Table 1 – 2025 Significant Composite DDH Assays Results
| Hole number | From | To | Width | Au ppm | Sb % | |
| DDH25-109 | 336.0 | 357.8 | 21.8 | 6.74 | 0.16 | |
| includes | 339.3 | 351.7 | 12.4 | 10.11 | 0.25 | |
| DDH25-109 | 380.0 | 381.0 | 1.0 | 7.89 | 0.02 | |
| DDH25-109 | 400.7 | 401.5 | 0.8 | 54.90 | 0.03 | |
| DDH25-109 | 534.0 | 534.9 | 0.9 | 18.90 | 0.16 | |
| DDH25-110 | 301.5 | 315.6 | 14.1 | 2.34 | 0.07 | |
| includes | 303.5 | 305.1 | 1.6 | 7.19 | 0.02 | |
| &includes | 313.1 | 315.6 | 2.5 | 7.06 | 0.13 | |
| DDH25-111 | 171.0 | 188.5 | 17.5 | 2.22 | 0.18 | |
| includes | 176.5 | 179.5 | 3.0 | 5.58 | 0.09 | |
| DDH25-112 | 216.0 | 216.5 | 0.5 | 3.25 | 0.01 | |
| and | 223.2 | 223.7 | 0.5 | 2.40 | 0.01 | |
| and | 232.4 | 233.3 | 0.9 | 4.12 | 0.01 | |
| DDH25-113 | 225.0 | 228.3 | 3.3 | 5.63 | 5.12 | |
| includes | 225.0 | 225.8 | 0.8 | 10.15 | 1.65 | |
| and | 253.0 | 256.0 | 3.0 | 11.21 | 0.01 | |
| and | 270.8 | 271.4 | 0.6 | 11.35 | 0.65 | |
| and | 383.3 | 383.8 | 0.5 | 3.27 | 0.55 | |
| DDH25-114 | 207.6 | 212.1 | 4.5 | 1.17 | 0.93 | |
| includes | 207.6 | 208.1 | 0.5 | 3.47 | 4.42 | |
| DDH25-115 | 288.8 | 291.2 | 2.4 | 5.46 | 0.17 | |
| includes | 288.8 | 289.9 | 1.1 | 8.08 | 0.34 | |
| and | 352.5 | 353.1 | 0.6 | 4.76 | 0.01 | |
| and | 418.7 | 421.1 | 2.4 | 6.60 | 0.08 | Ultramafic |
| Includes | 418.7 | 420.3 | 1.6 | 9.38 | 0.08 | |
| DDH25-116 | 288.7 | 299.2 | 10.5 | 8.01 | 0.07 | |
| includes | 289.9 | 291.8 | 1.9 | 12.69 | 0.14 | |
| &includes | 294.5 | 297.4 | 2.9 | 15.12 | 0.06 |
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/265444
FAQ
What were the latest gold drilling results from Endurance Gold's (ENDGF) Crown Zone?
How many drill holes has Endurance Gold (ENDGF) completed in its 2025 drilling program?
What was the new discovery made in drill hole DDH25-115 at the Reliance Gold Project?
How many soil and rock samples has Endurance Gold collected in their 2025 program?
What is the success rate of Endurance Gold's Crown Gap drilling program?
