Fortuna intersects 1.9 g/t gold over 64 meters, confirming broad gold mineralization at Kabewest, Bambadji Project, Senegal
Remaining assays and technical review will support a planned initial Kabewest resource estimate in the first quarter of 2027.
Sentiment and the balance of points
Rhea-AI Sentiment reads the wording of the document, how positive or negative its language is on a 1 to 5 scale. The balance of points shown with the takes weighs what the document actually discloses, so the two can disagree, for example when a trial that missed its main goal is described in upbeat language.
Rhea-AI Summary
Fortuna Mining (NYSE: FSM; TSX: FVI) reported first drilling results from the Kabewest prospect at its Bambadji Project in Senegal. Hole FBRC0008 returned 1.9 grams of gold per tonne over an estimated true width of 64 meters from 19 meters. Mineralization has been intersected over more than 600 meters of strike and remains open along strike and at depth. Kabewest is approximately 2.3 kilometers from the proposed Diamba Sud plant site.
The initial program completed 45 holes totaling 10,524 meters, part of a planned $8 million, 51,000-meter Bambadji drilling program through the end of 2026. Approximately 70 percent of assays have been received. Fortuna expects an initial Inferred Mineral Resource estimate in the first quarter of 2027, subject to completion and review of remaining technical work. Six rigs have moved to Wari and Latifa, with three testing each prospect.
Positive
- Minor pointFBRC0008 returned 1.9 g/t gold over an estimated true width of 64 meters from 19 meters.
- Minor pointFBDD0008 returned 3.2 g/t gold over an estimated true width of 24 meters from surface.
- Minor pointFBRC0003 returned 3.1 g/t gold over an estimated true width of 24.2 meters from 4 meters.
- Minor pointFBDD0006 returned 1.8 g/t gold over an estimated true width of 29.5 meters from 393 meters.
- Minor pointFBRC0005 returned 1.4 g/t gold over an estimated true width of 29.6 meters from surface.
9 minor points
- Minor pointFBDD0001 returned 1.2 g/t gold over an estimated true width of 23 meters from 75 meters.
- Minor pointFBDD0009 returned 1.4 g/t gold over an estimated true width of 22 meters from 65.5 meters.
- Minor pointFBDD0009 also returned 1.3 g/t gold over an estimated true width of 23 meters from 107 meters.
- Minor pointKabewest mineralization spans more than 600 meters of strike and remains open along strike and at depth.
- Minor pointInitial Kabewest drilling completed 45 holes totaling 10,524 meters.
- Minor point. Forward-looking: it has not happened yet and may not happen.Bambadji drilling plans cover 51,000 meters through end-2026, targeting at least eight priority prospects.
- Minor pointWari and Latifa exploration now has three drill rigs at each prospect.
- Minor point. Forward-looking: it has not happened yet and may not happen.Fortuna plans an initial Kabewest Inferred Mineral Resource estimate in the first quarter of 2027.
- Minor point. Forward-looking: it has not happened yet and may not happen.Target refinement for the 2027 field season covers more than 60 kilometers of strike across three mineralized trends.
Negative
- Minor point. Forward-looking: it has not happened yet and may not happen.Bambadji's planned drilling program carries an $8 million exploration budget.
- Minor pointKabewest assays remain incomplete; approximately 70 percent have been received, with the balance expected in coming weeks.
- Minor point. Forward-looking: it has not happened yet and may not happen.The initial resource estimate remains subject to completion and review of remaining technical work.
Key Figures
- Gold intercept
- 1.9 g/t Au over 64 m
- FBRC0008; estimated true width from 19 m
- Gold intercept
- 3.1 g/t Au over 24.2 m
- FBRC0003; estimated true width from 4 m
- Gold intercept
- 3.2 g/t Au over 24 m
- FBDD0008; estimated true width from surface
- Assays received
- Approximately 70%
- Kabewest drilling results
- Initial drilling completed
- 45 holes totaling 10,524 m
- Kabewest reverse circulation and diamond drilling
- Broader drilling program
- $8 million; 51,000 m
- Planned across the Bambadji Project through the end of 2026
- Mineralized strike
- More than 600 m
- Kabewest; mineralization remains open along strike and at depth
- Initial resource estimate
- First quarter of 2027
- Planned publication, subject to completion and review of remaining technical work
Historical Context
-
Bambadji drilling started with Kabewest assays pending; initial resource estimate planned for Q1 2027.
24h Move is the share-price change in the day after each event; other market factors may also have contributed.
Key Terms
reverse circulation technical
diamond drilling technical
fire assay technical
atomic absorption technical
hydrothermal breccia technical
AI-generated analysis. How Rhea-AI works. Not financial advice.
VANCOUVER, British Columbia, Nov. 02, 2026 (GLOBE NEWSWIRE) -- Fortuna Mining Corp. (NYSE: FSM | TSX: FVI) is pleased to report encouraging first drilling results from the Kabewest prospect at its recently acquired Bambadji Project in Senegal. Kabewest is the most advanced drill-defined prospect at Bambadji and is located approximately 2.3 kilometers from the proposed Diamba Sud Gold Project plant site.
Paul Weedon, Senior Vice President of Exploration, commented, “The first holes at Kabewest have returned broad mineralized intervals, including 1.9 g/t Au over an estimated true width of 64 meters from 19 meters in drill hole FBRC0008. These results provide strong support for our geological interpretation and show clear similarities to the breccia-hosted mineralization at Diamba Sud,” Mr. Weedon continued, “With approximately 70 percent of assays received, the results to date continue to build confidence in the interpreted controls on mineralization and in Bambadji’s potential to expand Diamba Sud.” Mr. Weedon concluded, “We look forward to receiving the remaining assays in the coming weeks and incorporating the complete dataset into our work toward an initial Inferred Mineral Resource estimate, planned for publication in the first quarter of 2027.”
Kabewest Drilling Highlights
FBDD0001: 1.2 g/t Au over an estimated true width of 23 meters from 75 meters
FBDD0006: 1.8 g/t Au over an estimated true width of 29.5 meters from 393 meters
FBDD0008: 3.2 g/t Au over an estimated true width of 24 meters from surface, including 11.3 g/t Au over an estimated true width of 1.5 meters from 8 meters and 12.2 g/t Au over an estimated true width of 0.7 meters from 30 meters
FBDD0009: 1.4 g/t Au over an estimated true width of 22 meters from 65.5 meters, and 1.3 g/t Au over an estimated true width of 23 meters from 107 meters
FBRC0003: 3.1 g/t Au over an estimated true width of 24.2 meters from 4 meters, including 15.1 g/t Au over an estimated true width of 0.7 meters from 25 meters
FBRC0005: 1.4 g/t Au over an estimated true width of 29.6 meters from surface
FBRC0008: 1.9 g/t Au over an estimated true width of 64 meters from 19 meters, including 16.3 g/t Au over an estimated true width of 1.5 meters from 24 meters
The Bambadji Project is located immediately adjacent to the Diamba Sud Gold Project. The initial Kabewest drilling program, comprising 45 reverse circulation (“RC”) and diamond drill (“DD”) holes totalling 10,524 meters, has been completed. This work forms the first phase of a broader
Figure 1: Bambadji Project: Location of priority exploration prospects and proximity to the Diamba Sud Gold Project proposed plant site
Broad mineralized intervals from the initial Kabewest drilling include 1.9 g/t Au over an estimated true width of 64 meters from 19 meters in drill hole FBRC0008 (refer to Figure 2), 1.4 g/t Au over an estimated true width of 29.6 meters in drill hole FBRC0005 (refer to Figure 3) and 3.1 g/t Au over an estimated true width of 24.2 meters from 4 meters in drill hole FBRC0003 (refer to Figure 4). These results strengthen the current geological interpretation and demonstrate geological continuity with the breccia-hosted mineralization at the nearby Diamba Sud deposits. Mineralization has been intersected over more than 600 meters of strike and remains open along strike and at depth, providing clear opportunities for systematic follow-up drilling.
Approximately 70 percent of assays have been received, with the balance expected in the coming weeks. Geological model updates are progressing and will incorporate the complete assay dataset to support preparation of an initial Inferred Mineral Resource estimate for Kabewest. Subject to completion and review of the remaining technical work, the Company expects to include the estimate in its annual Mineral Reserve and Mineral Resource update planned for publication in the first quarter of 2027.
Figure 2: Bambadji Project: Kabewest prospect, cross-section 350NE
Figure 3: Bambadji Project: Kabewest prospect, cross section 250NE
Figure 4: Bambadji Project: Kabewest prospect, cross section 50NE
As observed at Diamba Sud, mineralization at Kabewest is generally associated with hydrothermal breccia units, hematite-silica-altered limestone, and extensive pyrite development. These features reinforce the interpreted structural controls on gold-bearing fluids within the Falémé domain, which hosts both projects. The comparable geological features identified across the adjacent Diamba Sud and Bambadji Project support continued systematic exploration along the Senegal-Mali Shear Zone.
Following completion of the initial phase of Kabewest drilling, the six drill rigs have been relocated to the Wari and Latifa prospects (refer to Figure 1), where three drill rigs at each prospect are testing areas defined by historical, widely spaced reconnaissance drilling. Work is also progressing to refine targets for the 2027 field season using geochemical and geophysical data across more than 60 kilometers of strike within the Bambadji Project, where three mineralized trends have been identified. Historical drilling along these trends is generally shallow and widely spaced, leaving several multi-kilometer gaps that provide priority areas for evaluation as part of Fortuna’s 2026 and 2027 exploration programs.
Quality Assurance & Quality Control (QA - QC)
All drilling data completed by the Company utilized the following procedures and methodologies. All drilling was carried out under the supervision of the Company’s personnel.
All reverse circulation (RC) drilling used a 5.25-inch face sampling pneumatic hammer with samples collected into 60-liter plastic bags. Samples were kept dry by maintaining enough air pressure to exclude groundwater inflow. If water ingress exceeded the air pressure, RC drilling was stopped, and drilling converted to diamond core tails. Once collected, RC samples were riffle split through a three-tier splitter to yield a 12.5 percent representative sample for submission to the analytical laboratory. The residual 87.5 percent samples were stored at the drill site until assay results were received and validated. Coarse reject samples for all mineralized samples corresponding to significant intervals are retained and stored on-site at the Company-controlled core yard.
All diamond drilling (DD) drill holes started with HQ sized diameter, before reducing to NQ diameter diamond drill bits on intersecting fresh rock. The core was logged, marked up for sampling using standard lengths of one meter or to a geological boundary. Samples were then cut into equal halves using a diamond saw. One half of the core was left in the original core box and stored in a secure location at the Company core yard at the project site. The other half was sampled, catalogued, and placed into sealed bags and securely stored at the site until shipment.
All RC and DD samples were transported by Company vehicle or commercial courier to ALS Global’s preparation laboratories in Kedougou, Senegal with prepared sample pulps then transported via commercial courier to ALS Global’s analytical facility in Ouagadougou, Burkina Faso. Routine gold analysis using a 50-gram charge and fire assay with an atomic absorption finish was completed for all samples. Samples returning assays >10 ppm Au were reanalyzed using a 50-gram charge and fire assay with a gravimetric finish. Quality control procedures included the systematic insertion of blanks, duplicates and sample standards into the sample stream. In addition, the ALS Global laboratory inserted its own quality control samples.
Qualified Person
Paul Weedon, Senior Vice President, Exploration for Fortuna Mining Corp., is a Qualified Person as defined by National Instrument 43-101 and is a member of the Australian Institute of Geoscientists (Membership No. 6001). Mr. Weedon has reviewed and approved the scientific and technical information contained in this news release. He has verified the disclosed data, including the sampling, analytical and test data underlying the information and opinions herein, through review of the geochemical and geological databases and diamond drill core. There were no limitations on the verification process.
About Fortuna Mining Corp.
Fortuna Mining Corp. is a Canadian precious metals mining company with three operating mines in Argentina, Côte d’Ivoire, and Peru, and the feasibility-stage Diamba Sud Gold Project in Senegal. Our exploration portfolio spans our operating jurisdictions as well as Guinea and Guyana. Sustainability is at the core of our operations and stakeholder relationships. We produce gold and silver while creating long-term shared value through efficient production, environmental stewardship, and social responsibility. For more information, please visit our website at www.fortunamining.com
ON BEHALF OF THE BOARD
Jorge A. Ganoza
CEO, and Director
Fortuna Mining Corp.
Investor Relations:
Carlos Baca | info@fmcmail.com | fortunamining.com | X | LinkedIn | YouTube | Instagram | TikTok
Forward looking Statements
This news release contains forward-looking statements that constitute “forward-looking information” within the meaning of applicable Canadian securities legislation and “forward-looking statements” within the meaning of the safe harbor provisions of the United States Private Securities Litigation Reform Act of 1995 (collectively, “Forward-looking Statements”). Forward-looking Statements in this release include, without limitation, expectations regarding the timing and receipt of outstanding assay results; completion and interpretation of geological models; preparation, timing and potential inclusion of an initial Inferred Mineral Resource estimate for Kabewest in the Company’s annual Mineral Reserve and Mineral Resource update; the scope, timing and targets of the 2026–2027 exploration program at Bambadji; statements regarding Bambadji’s potential to expand Diamba Sud; statements regarding the proposed Diamba Sud plant site; the potential for mineralization to continue along strike or at depth. Forward-looking Statements are based on management’s current expectations and assumptions and are subject to known and unknown risks, uncertainties and other factors that may cause actual results to differ materially. Words such as “expect,” “plan,” “target,” “intend,” “estimate,” “potential,” “may,” “will,” “could,” “should” and similar expressions identify Forward-looking Statements, although not all Forward-looking Statements contain these identifying words.
Forward-looking Statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance, or achievements of the Company to be materially different from any results, performance or achievements expressed or implied by the Forward-looking Statements. Such uncertainties and factors include, among others, operational risks associated with mining and mineral processing; uncertainty relating to Mineral Resource and Mineral Reserve estimates; uncertainty relating to capital and operating costs, production schedules and economic returns; risks relating to the Company’s ability to replace its Mineral Reserves; risks related to the conversion of Mineral Resources to Mineral Reserves; risks associated with mineral exploration and project development; uncertainty relating to the repatriation of funds as a result of currency controls; environmental matters including obtaining or renewing environmental permits and potential liability claims; uncertainty relating to nature and climate conditions; laws and regulations regarding the protection of the environment (including greenhouse gas emission reduction and other decarbonization requirements and the uncertainty surrounding the interpretation of omnibus Bill C-59 and the related amendments to the Competition Act (Canada); risks associated with political instability and changes to the regulations governing the Company’s business operations; changes in national and local government legislation, taxation, controls, regulations and political or economic developments in countries in which the Company does or may carry on business; risks associated with war, hostilities or other conflicts, such as the Ukrainian – Russian, and Israeli – Hamas conflicts, and the impacts they may have on global economic activity; risks relating to the termination of the Company’s mining concessions in certain circumstances; developing and maintaining relationships with local communities and stakeholders; risks associated with losing control of public perception as a result of social media and other web-based applications; potential opposition to the Company’s exploration, development and operational activities; risks related to the Company’s ability to obtain adequate financing for planned exploration and development activities; property title matters; risks related to the ability to retain or extend title to the Company’s mineral properties; risks relating to the integration of businesses and assets acquired by the Company; impairments; risks associated with climate change legislation; reliance on key personnel; adequacy of insurance coverage; operational safety and security risks; legal proceedings and potential legal proceedings; uncertainties relating to general economic conditions; risks relating to a global pandemic, which could impact the Company’s business, operations, financial condition and share price; competition; fluctuations in metal prices; risks associated with entering into commodity forward and option contracts for base metals production; fluctuations in currency exchange rates and interest rates; tax audits and reassessments; risks related to hedging; uncertainty relating to concentrate treatment charges and transportation costs; sufficiency of monies allotted by the Company for land reclamation; risks associated with dependence upon information technology systems, which are subject to disruption, damage, failure and risks with implementation and integration; labor relations issues; as well as those factors discussed under “Risk Factors” in the Company's Annual Information Form for the fiscal year ended December 31, 2025. Although the Company has attempted to identify important factors that could cause actual actions, events, or results to differ materially from those described in Forward-looking Statements, there may be other factors that cause actions, events or results to differ from those anticipated, estimated or intended.
Forward-looking Statements contained herein are based on the assumptions, beliefs, expectations and opinions of management, including, but not limited to, the accuracy of the Company’s current Mineral Resource and Mineral Reserve estimates; that the Company’s activities will be conducted in accordance with the Company’s public statements and stated goals; that there will be no material adverse change affecting the Company, its properties or its production estimates (which assume accuracy of projected ore grade, mining rates, recovery timing, and recovery rate estimates and may be impacted by unscheduled maintenance, labor and contractor availability and other operating or technical difficulties); the duration and effect of global and local inflation; the duration and impacts of geo-political uncertainties on the Company’s production, workforce, business, operations and financial condition; the expected trends in mineral prices, inflation and currency exchange rates; that all required approvals and permits will be obtained for the Company’s business and operations on acceptable terms; that there will be no significant disruptions affecting the Company's operations and such other assumptions as set out herein. Forward-looking Statements are made as of the date hereof and the Company disclaims any obligation to update any Forward-looking Statements, whether as a result of new information, future events, or results or otherwise, except as required by law. There can be no assurance that these Forward-looking Statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, investors should not place undue reliance on Forward-looking Statements.
Cautionary Note to United States Investors Concerning Mineral Resources and Reserves
Technical disclosure regarding the Company’s properties included in this news release has been prepared in accordance with National Instrument 43-101, Standards of Disclosure for Mineral Projects (“NI 43-101”) and the Canadian Institute of Mining, Metallurgy, and Petroleum Definition Standards on Mineral Resources and Mineral Reserves. Canadian standards, including NI 43-101, differ from the requirements of the Securities and Exchange Commission, and information included herein may not be comparable to similar information disclosed by U.S. companies.
Appendix 1: Bambadji Project drill program details of the drill holes and assay results
| HoleID | Easting (WGS84_29N) | Northing (WGS84_29N) | Elevation (m) | EOH Depth1 | UTM Azimuth | Dip | Depth From (m) | Depth To (m) | Drilled Width (m) | ETW4 (m) | Au (ppm) | Hole Type5 | Area |
| FBDD0001 | 235001 | 1430989 | 155 | 236 | 135 | -60 | 75 | 111 | 36 | 23.0 | 1.2 | DD | KBW |
| 177 | 191 | 14 | 12.0 | 0.9 | DD | KBW | |||||||
| FBDD0002 | 234985 | 1431076 | 155 | 227 | 135 | -50 | 174 | 192 | 18 | 13.0 | 0.9 | DD | KBW |
| FBDD0003 | 235030 | 1431102 | 158 | 236 | 135 | -50 | 113 | 128 | 15 | 10.0 | 0.9 | DD | KBW |
| FBDD0004 | 234952 | 1430897 | 153 | 194 | 135 | -50 | 67 | 76 | 9 | 7.0 | 0.6 | DD | KBW |
| 86 | 93 | 7 | 5.5 | 1.0 | DD | KBW | |||||||
| 108 | 114 | 6 | 4.3 | 1.5 | DD | KBW | |||||||
| 128 | 137 | 9 | 6.5 | 1.2 | DD | KBW | |||||||
| FBDD0005 | 234866 | 1430911 | 151 | 353 | 135 | -50 | 18 | 39 | 21 | 16.0 | 1.4 | DD | KBW |
| Including | 30 | 32 | 2 | 1,5 | LOSS | DD | KBW | ||||||
| 45 | 54 | 9 | 6.0 | 1.5 | DD | KBW | |||||||
| Including | 45 | 46 | 1 | 0.7 | 10.4 | DD | KBW | ||||||
| 140 | 166 | 26 | 18.0 | 0.9 | DD | KBW | |||||||
| 179 | 198 | 19 | 14.2 | 1.4 | DD | KBW | |||||||
| 212 | 238 | 26 | 18.3 | 0.7 | DD | KBW | |||||||
| 247 | 266 | 19 | 13.2 | 0.7 | DD | KBW | |||||||
| FBDD0006 | 234779 | 1431000 | 150 | 534 | 135 | -50 | 235 | 239 | 4 | 3.0 | 1.5 | DD | KBW |
| 276 | 286 | 10 | 7.3 | 1.1 | DD | KBW | |||||||
| 303 | 319 | 16 | 13.0 | 0.9 | DD | KBW | |||||||
| 349 | 361 | 12 | 9.0 | 0.6 | DD | KBW | |||||||
| 393 | 430 | 37 | 29.5 | 1.8 | DD | KBW | |||||||
| 458 | 469 | 11 | 9.0 | 0.7 | DD | KBW | |||||||
| FBDD0007 | 234884 | 1430965 | 152 | 320 | 135 | -50 | 70 | 101 | 31 | 23.0 | 1.0 | DD | KBW |
| 215 | 224 | 9 | 6.0 | 1.4 | DD | KBW | |||||||
| 230 | 269 | 39 | 21.0 | 1.0 | DD | KBW | |||||||
| FBDD0008 | 234949 | 1430758 | 150 | 282 | 135 | -50 | 0 | 40 | 40 | 24.0 | 3.2 | DD | KBW |
| Including | 8 | 10 | 2 | 1.5 | 11.3 | DD | KBW | ||||||
| And | 30 | 31 | 1 | 0.7 | 12.2 | DD | KBW | ||||||
| 48 | 85 | 37 | 23.0 | 1.0 | DD | KBW | |||||||
| 93 | 101 | 8 | 6.0 | 0.6 | DD | KBW | |||||||
| FBDD0009 | 234775 | 1430861 | 150 | 507 | 135 | -50 | 14 | 24 | 10 | 7.3 | 1.0 | DD | KBW |
| 65.5 | 100 | 34.5 | 22.0 | 1.4 | DD | KBW | |||||||
| 107 | 143 | 36 | 23.0 | 1.3 | DD | KBW | |||||||
| 109 | 110 | 1 | LOSS | DD | KBW | ||||||||
| 222 | 244 | 22 | 14.6 | 0.9 | DD | KBW | |||||||
| 251 | 265 | 14 | 8.7 | 0.6 | DD | KBW | |||||||
| 341 | 343 | 2 | 1.4 | 8.2 | DD | KBW | |||||||
| Including | 341 | 342 | 1 | 0.7 | 13.0 | DD | KBW | ||||||
| 362 | 391 | 29 | 19.3 | 1.2 | DD | KBW | |||||||
| 477 | 484 | 7 | 4.6 | 1.3 | DD | KBW | |||||||
| FBDD0010 | 234828 | 1430808 | 149 | 135 | -50 | 16 | 32 | 16 | 12.4 | 1.3 | DD | KBW | |
| Including | 20 | 21 | 1 | 0.8 | LOSS | DD | KBW | ||||||
| And | 26 | 27 | 1 | 0.8 | LOSS | DD | KBW | ||||||
| And | 29 | 30 | 1 | 0.8 | LOSS | DD | KBW | ||||||
| 175 | 197 | 22 | 18.6 | 1.8 | DD | KBW | |||||||
| Including | 177 | 178 | 1 | 0.7 | 10.2 | DD | KBW | ||||||
| 218 | 227 | 9 | 7.1 | 1.3 | DD | KBW | |||||||
| 285 | 315 | 30 | 23.3 | 0.7 | DD | KBW | |||||||
| 352 | 365 | 13 | 9.5 | 0.6 | DD | KBW | |||||||
| FBDD0011 | 234850 | 1431000 | 152 | 249 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0012 | 235054 | 1431220 | 159 | 239 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0013 | 234922 | 1430643 | 160 | 240 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0014 | 234599 | 1431039 | 151 | 246 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0015 | 234887 | 1430678 | 158 | 297 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0016 | 234704 | 1431004 | 152 | 251 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0017 | 235019 | 1431255 | 157 | 285 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0018 | 234966 | 1430954 | 153 | 224 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0019 | 234853 | 1430712 | 154 | 342 | 135 | -60 | Pending assays | DD | KBW | ||||
| FBDD0020 | 234986 | 1430720 | 153 | 188 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0021 | 234931 | 1430989 | 155 | 245 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0022 | 235032 | 1431384 | 158 | 261 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0023 | 237150 | 1433950 | 150 | 231 | 90 | -50 | Pending assays | DD | Wari | ||||
| FBDD0024 | 234913 | 1430794 | 150 | 287 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0025 | 234781 | 1430927 | 149 | 411 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0027 | 234895 | 1431025 | 153 | 296 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0028 | 235103 | 1431100 | 156 | 102 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0029 | 234840 | 1430868 | 149 | 407 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBDD0031 | 234745 | 1430964 | 149 | 525 | 135 | -50 | Pending assays | DD | KBW | ||||
| FBRC0001 | 235043 | 1431015 | 156 | 143 | 135 | -50 | 2 | 4 | 2 | 1.6 | 5.5 | RC | KBW |
| 12 | 31 | 19 | 12.0 | 1.9 | RC | KBW | |||||||
| 100 | 105 | 5 | 3.8 | 1.9 | RC | KBW | |||||||
| 109 | 114 | 5 | 3.3 | 1.1 | RC | KBW | |||||||
| FBRC0002 | 235036 | 1430948 | 154 | 180 | 135 | -50 | 114 | 120 | 6 | 5.3 | 0.9 | RC | KBW |
| FBRC0003 | 234998 | 1430916 | 154 | 174 | 135 | -50 | 4 | 38 | 34 | 24.2 | 3.1 | RC | KBW |
| Including | 25 | 26 | 1 | 0.7 | 15.1 | RC | KBW | ||||||
| FBRC0004 | 235099 | 1431033 | 156 | 66 | 135 | -50 | 10 | 45 | 35 | 24.3 | 1.0 | RC | KBW |
| FBRC0005 | 235065 | 1431071 | 157 | 144 | 135 | -50 | 0 | 46 | 46 | 29.6 | 1.4 | RC | KBW |
| 55 | 56 | 1 | 0.7 | 5.4 | RC | KBW | |||||||
| FBRC0006 | 235036 | 1430741 | 152 | 126 | 135 | -50 | NSI | RC | KBW | ||||
| FBRC0007 | 235091 | 1431254 | 156 | 168 | 135 | -50 | NSI | RC | KBW | ||||
| FBRC0008 | 235089 | 1431185 | 160 | 120 | 135 | -50 | 19 | 115 | 96 | 64.0 | 1.9 | RC | KBW |
| Including | 24 | 26 | 2 | 1.5 | 16.3 | RC | KBW | ||||||
| FBRC0009 | 235022 | 1430684 | 158 | 144 | 135 | -50 | NSI | RC | KBW | ||||
| FBRC0010 | 234992 | 1430643 | 158 | 132 | 135 | -55 | NSI | RC | KBW | ||||
| FBRC0011 | 234957 | 1430607 | 161 | 108 | 135 | -50 | 6 | 26 | 20 | 13.0 | 1.5 | RC | KBW |
| Including | 11 | 12 | 1 | 0.7 | 13.8 | RC | KBW | ||||||
| And | 13 | 17 | 4 | LOSS | RC | KBW | |||||||
| 54 | 61 | 7 | 6.5 | 0.9 | RC | KBW | |||||||
| 79 | 102 | 23 | 16.3 | 0.4 | RC | KBW | |||||||
| FBRC0012 | 234730 | 1430836 | 152 | 120 | 135 | -50 | 114 | 120 | 6 | 4.0 | 1.1 | RC | KBW |
| FBRC0013 | 234695 | 1430872 | 151 | 138 | 135 | -50 | NSI | RC | KBW | ||||
| FBRC0014 | 234625 | 1430943 | 152 | 162 | 135 | -50 | NSI | RC | KBW | ||||
| FBRC0015 | 235067 | 1431349 | 158 | 156 | 135 | -50 | NSI | RC | KBW | ||||
| FBRC0016 | 234894 | 1430600 | 162 | 120 | 135 | -50 | 94 | 103 | 9 | 6.7 | 0.7 | RC | KBW |
| FBRC0017 | 237175 | 1434000 | 149 | 108 | 90 | -50 | NSI | RC | KBW |
Notes:
1. EOH: End of hole
2. Depths and widths reported to nearest significant decimal place
3. NSI: No significant intercepts
4. ETW: Estimated true width
5. RC: reverse circulation drilling | DD: diamond drilling
Photos accompanying this announcement are available at
https://www.globenewswire.com/NewsRoom/AttachmentNg/153e4b2e-460a-405b-bc7e-f746b40923c1
https://www.globenewswire.com/NewsRoom/AttachmentNg/d193f211-7369-4380-8953-dd1bc6002dec
https://www.globenewswire.com/NewsRoom/AttachmentNg/7d028c63-8a9a-48d0-97af-e96eada9929a
https://www.globenewswire.com/NewsRoom/AttachmentNg/2de7cc56-f604-4fbf-923c-344ad7f41a54
PDF available: http://ml.globenewswire.com/Resource/Download/9f9b1cc0-38a2-4200-a9a1-847eee13be8e
FAQ
AI-generated questions and answers. How Rhea-AI works. Not financial advice.
What did Fortuna Mining's first Kabewest drilling results show?
Hole FBRC0008 returned 1.9 grams of gold per tonne over an estimated true width of 64 meters from 19 meters. Across Kabewest, drilling intersected mineralization over more than 600 meters of strike, with mineralization remaining open along strike and at depth.
When does Fortuna Mining expect its first Kabewest mineral resource estimate?
Fortuna expects to include the initial Kabewest Inferred Mineral Resource estimate in its annual Mineral Reserve and Mineral Resource update planned for the first quarter of 2027. That timing is subject to completion and review of the remaining technical work.
What geological similarities link Fortuna Mining's Kabewest prospect and Diamba Sud?
Kabewest mineralization is generally associated with hydrothermal breccia units, hematite-silica-altered limestone, and extensive pyrite development, as observed at Diamba Sud. Fortuna views these comparable geological features as support for continued systematic exploration along the Senegal-Mali Shear Zone.
What areas is Fortuna Mining testing at Wari and Latifa?
Drilling at Wari and Latifa is testing areas defined by historical, widely spaced reconnaissance drilling. Across Bambadji's identified mineralized trends, historical drilling is generally shallow and widely spaced, leaving several multi-kilometer gaps identified as priority evaluation areas for the 2026 and 2027 exploration programs.