Hannan Hits High-Grade Gold in Final Two Stavaträsk Holes, Drilling Returns 4.6 m at 7.2 g/t Au, Including 0.7 m at 21.4 g/t Au, Within a 60 m Mineralized Zone, Gold Intersected in All Seven Holes Across 650 m of Strike; IP Survey and 1,000 m Follow-Up Drill Program to Come
Rhea-AI Summary
Hannan Metals (OTC: HANNF) reported the final assays from its maiden 7‑hole, 1,040 m diamond drill program at the Stavaträsk gold project in Sweden, which tested 650 m of strike within a ~7 km structural corridor. Gold was intersected in all seven holes.
Key intercepts from deep holes ST2606 and ST2607 include 59.6 m @ 1.1 g/t Au from 48.5 m in ST2606, with a higher‑grade section of 4.6 m @ 7.2 g/t Au and individual assays up to 21.4 g/t Au over 0.7 m, plus 3.2 m @ 1.4 g/t Au from 166.2 m in ST2607. A polymetallic interval in ST2606 returned 0.4 m @ 6.5 g/t Au, 66.4 g/t Ag and 1.35% Cu.
According to Hannan, these results demonstrate mineralization down‑dip from surface and support a planned induced polarization survey and a ~1,000 m follow‑up drill program. The company also announced the resignation of director and General Manager, Peru, Katty Vargas, effective August 31, 2026.
Positive
- Gold hit in all 7 drill holes across 650 m of strike at Stavaträsk
- Best interval ST2606 59.6 m @ 1.1 g/t Au from 48.5 m, including 4.6 m @ 7.2 g/t Au
- High-grade samples up to 21.4 g/t Au over 0.7 m and 15.1 g/t Au over 1.0 m
- Polymetallic potential interval of 0.4 m @ 6.5 g/t Au, 66.4 g/t Ag and 1.35% Cu in ST2606
- Follow-up work funded internally includes IP gradient-array survey and ~1,000 m second drill program
- Efficient permitting in Sweden with drill permit at Stavaträsk secured in four weeks
Negative
- True thickness unknown for all reported mineralized intervals at this early stage
- Historical data unverified by Hannan and used for informational purposes only
- Limited drilling to date with only 7 holes and 1,040 m completed on a ~7 km corridor
- Management change as director and General Manager, Peru, Katty Vargas resigns effective August 31, 2026
AI-generated analysis. How Rhea-AI works. Not financial advice.
Vancouver, British Columbia--(Newsfile Corp. - August 31, 2026) - Hannan Metals Limited (TSXV: HAN) (OTC Pink: HANNF) ("Hannan" or the "Company") announces the second and final set of assay results from its maiden diamond drill program at the Stavaträsk gold project in the Skellefteå district of northern Sweden (Figure 1). The program comprised seven holes for 1,040 m of drilling, aimed at testing 650 m of strike within a 7 km trend. Results from the final two holes, ST2606 and ST2607, are reported here (refer to Tables 1-3 herein).
Drillholes ST2606 and ST2607 were the two deepest holes of the program, aiming to drill-test the potential down-dip continuation of the granodiorite-hosted, quartz-arsenopyrite vein-swarm. Drillhole ST2606 returned the best intercept by grade-width of the entire 7-hole drill program, recording 4.6 m @ 7.2 g/t Au with individual assays up to 20.7 g/t Au over 0.6 m and 21.4 g/t Au over 0.7 m. These recurring high-grade quartz-arsenopyrite veins are hosted within a broad, ~60 m downhole interval of mineralized granodiorite.
Key Points:
- Gold intercepted in all seven holes of the maiden program at Stavaträsk, defining 650 m of mineralized strike-length. A further 1,000 m follow-up drill program is planned after IP geophysics.
- Best intercepts from the two holes reported here are:
- ST2606 59.6 m @ 1.1 g/t Au from 48.5 m (no lower cut). Best composite intercepts from ST2606 are:
- 7.0 m @ 2.6 g/t Au, 4.7 g/t Ag from 46.5 m, including:
- 1.0 m @ 15.1 g/t Au, 28.4 g/t Ag
- 4.6 m @ 7.2 g/t Au, 14.5 g/t Ag from 79.5 m, including 1.9 m @ 15.7 g/t Au, 31.7 g/t Ag, with individual assays of:
- 0.6 m @ 20.7 g/t Au, 16.3 g/t Ag
- 0.7 m @ 21.4 g/t Au, 29.5 g/t Ag
- 0.4 m @ 6.5 g/t Au, 66.4 g/t Ag
- 6.6 m @ 1.3 g/t Au, 1.2 g/t Ag from 102.1 m
- 7.0 m @ 2.6 g/t Au, 4.7 g/t Ag from 46.5 m, including:
- ST2607: 3.2 m @ 1.4 g/t Au, 2.2 g/t Ag from 166.2 m, including 0.7 m @ 5.1 g/t Au
- ST2606 59.6 m @ 1.1 g/t Au from 48.5 m (no lower cut). Best composite intercepts from ST2606 are:
- The Stavaträsk mineralized corridor is interpreted to lie along a structural trend which the Company’s mapping and interpretation trace as a prospective corridor of up to approximately 7 km.
Michael Hudson, CEO, states: "These final two holes have delivered the best results of our initial drill program and answered the most important question we set out to test - does the Stavaträsk gold system continue at depth? The answer is yes. ST2606 cut high-grade veins, with 4.6 m @ 7.2 g/t Au, 14.5 g/t Ag from 79.5 m, including 0.6 m @ 20.7 g/t Au, 16.3 g/t Ag, 0.7 m @ 21.4 g/t Au, 29.5 g/t Ag and 0.4 m @ 6.5 g/t Au, 66.4 g/t Ag hosted within a broad 60 m envelope of mineralized granodiorite that we can now trace down-dip from surface. Just as importantly, gold has now been intersected in every one of the seven holes across 650 m of strike, from as shallow as 12 m downhole. With the full data set from the initial program now in hand, we are moving quickly into an IP gradient-array geophysical survey to map the system at scale, ahead of a second drill program."
Technical Discussion
The Stavaträsk mineralized corridor lies along the regional-scale Vidsel-Röjnoret shear-system. Company mapping and interpretation trace the structural geological corridor for up to approximately 7 km of strike, in which the two distinct styles of mineralization at Stavaträsk are found (see Figure 3). Drillhole ST2606 and ST2607 are located in the southern mineralized zone, and drilled to 260 m, and 212.5 m length respectively, where both were targeting the interpreted down-dip continuation of the mineralized vein-array intersected in drillholes ST2601-ST2603 (see Figure 4; Table 1).
Drillhole ST2606 returned the best mineralization of the program, where a broad mineralized zone with no lower cut averaged 59.6 m @ 1.1 g/t Au from 48.5 m hosts a series of quartz-arsenopyrite veins. The best intercepts from drillhole ST2606 are:
- 7.0 m @ 2.6 g/t Au, 4.7 g/t Ag from 46.5 m, including:
- 1.0 m @ 15.1 g/t Au, 28.4 g/t Ag
- 4.6 m @ 7.2 g/t Au, 14.5 g/t Ag from 79.5 m, including 1.9 m @ 15.7 g/t Au, 31.7 g/t Ag, with individual assays of:
- 0.6 m @ 20.7 g/t Au, 16.3 g/t Ag
- 0.7 m @ 21.4 g/t Au, 29.5 g/t Ag
- 0.4 m @ 6.5 g/t Au, 66.4 g/t Ag
- 6.6 m @ 1.3 g/t Au, 1.2 g/t Ag from 102.1 m
A polymetallic interval returned 0.4 m @ 6.5 g/t Au, 66.4 g/t Ag and
Drillhole ST2607 was drilled 180 m east of ST2606, testing for depth extension to the strongly-mineralized granodiorite footwall contact as documented in drillhole ST2601 (see Hannan news release dated August 13, 2026). A more discrete zone of quartz-arsenopyrite veining was intercepted, returning
- 3.2 m @ 1.4 g/t Au, 2.2 g/t Ag from 166.2 m, including 0.7 m @ 5.1 g/t Au
Across the two holes reported here, 358 samples covering 329 m of core were assayed. Of these, 69 samples (
Stavaträsk Project
Stavaträsk is located in the Skellefteå Mining District of northern Sweden, 20 km north of the Boliden deposit (8.4 Mt at 15.5 g/t Au for approximately 4.2 Moz of historic production; source quoted in Figure 2). The project occupies a strategic position on the Vidsel-Röjnoret Shear System (VRSS), the same regional-scale terrane boundary that hosts Boliden.
Gold, silver and copper mineralization is structurally hosted, with massive to semi-massive arsenopyrite, pyrite and chalcopyrite with silica alteration. Outcrop samples return grades of up to 93 g/t Au and 24 g/t Ag. A boulder field located 650 m southeast of the main outcrop yielded eight samples averaging 3.2 g/t Au (range 0.1 g/t to 11.2 g/t Au), 67 g/t Ag (range 1 g/t to 154 g/t Ag) and
Plate 1: Core sample from ST2606 at 80.9 m showing chalcopyrite, pyrrhotite and arsenopyrite in a quartz shear vein, returning 0.4 m @ 6.5 g/t Au, 66.4 g/t Ag and
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5402/312120_36ef4aaf04cfdbde_003full.jpg
Next Steps
With the full data set from the maiden drill program now in hand, Hannan will undertake an induced polarization (IP) gradient-array geophysical survey across the Stavaträsk prospect. The survey is designed to map the sulphide-bearing structures at scale along the 650 m of strike. Results from the drill program are concurrently being incorporated into a 3D geological model to refine the interpreted geometry and down-dip continuity of the granodiorite-hosted vein arrays. Together, the IP and modelling work will define targets for a second drill program of approximately 1,000 m, planned to test both the depth extension of the southern mineralized zone and priority targets generated along strike.
Historical Data and Reporting Notes
Historical data have not been verified by Hannan and are quoted for informational purposes only. It is believed that the primary analysis for gold was completed by fire assay with atomic absorption finish. Compilation of available data and 3D geologic modelling are in progress.
The true thickness of the mineralized intervals reported here is not known at this stage.
Composite drill hole intervals have been calculated using a 0.5 g/t Au cut-off with a maximum 2 m internal dilution; higher-grade sub-intervals are reported at a 3.0 g/t Au cut-off with a maximum 2 m internal dilution. The 59.6 m interval reported for ST2606 is calculated with no lower cut.
Corporate
Hannan further announces that Katty Vargas has resigned as a Director of the Company and as General Manager, Peru, effective August 31, 2026. The Board thanks Ms. Vargas for her many contributions to Hannan and wishes her success in her future endeavours.
Sweden: A Tier-One European Mining Jurisdiction
Sweden is positioning itself as the cornerstone of Europe's domestic mineral supply under the EU Critical Raw Materials Act. The efficiency of its permitting regime is demonstrated firsthand at Stavaträsk, where a drill permit was secured in four weeks. The country consistently ranks among the world's most attractive mining jurisdictions in the Fraser Institute's Annual Survey of Mining Companies, offering stable policy, established infrastructure, low-cost hydropower and a skilled workforce. The district also supports near year-round drilling: an established forestry road network enables access through the summer, while winter snow cover allows rigs to move broadly across the terrain, with only a short shoulder season during the spring thaw.
Sampling, Analytical Methods and Quality Control
Whole drill core was logged and photographed by Company personnel and securely transported to MSALABS (MSA Analytical Services), an ISO/IEC 17025-accredited laboratory, at its facility in Storuman, Sweden, where the core was cut, sampled and prepared for analysis. The sample pulps were shipped to the MSALABS facility in Canada for analysis. Gold was determined on a 30 g charge by lead-collection fire assay fusion with an atomic absorption finish (method FAS-114), with high-grade samples re-assayed on a 30 g charge by fire assay with a gravimetric finish (method FAS-415). Multi-element analysis, including silver and copper, was carried out on a 0.25 g aliquot by four-acid digestion with ultra-trace ICP-ES/MS determination of 48 elements (method IMS-230); over-limit arsenic was determined by an ore-grade four-acid digestion with an ICP-ES finish (method ICF-6As). As part of its quality assurance and quality control program, the Company inserted certified reference materials at approximately one in fifteen samples and field duplicates at approximately one in fifty, and the laboratory operated its own internal program of blanks, standards and duplicates. The Qualified Person has reviewed the quality-control results and is satisfied that the assay data are reliable for the purposes of this disclosure.
About Hannan Metals Limited (TSXV: HAN) (OTC Pink: HANNF)
Hannan Metals Limited is an exploration company with a primary focus on advancing its Previsto gold-copper prospect (Amanecer project) in Peru, and an option to earn
Mr. Michael Hudson FAusIMM, Hannan's Chairman and CEO, a Qualified Person as defined in National Instrument 43-101, has prepared, reviewed, verified and approved the technical contents of this news release.
Further Information
Further discussion and analysis of the project is available through the Hannan Metals website at www.hannanmetals.com and the Hannan YouTube channel at www.youtube.com/@HannanMetals
| On behalf of the Board, "Michael Hudson" Michael Hudson, Chairman & CEO | Further Information www.hannanmetals.com 1305 - 1090 West Georgia St., Vancouver, BC, V6E 3V7 Mariana Bermudez, Corporate Secretary +1 (604) 685 9316, info@hannanmetals.com |
Forward Looking Statements. Certain disclosure contained in this news release may constitute forward-looking information or forward-looking statements, within the meaning of Canadian securities laws. These statements may relate to this news release and other matters identified in the Company's public filings. In making the forward-looking statements the Company has applied certain factors and assumptions that are based on the Company's current beliefs as well as assumptions made by and information currently available to the Company. These statements address future events and conditions and, as such, involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the statements. These risks and uncertainties include but are not limited to: the political environment in which the Company operates continuing to support the development and operation of mining projects; risks related to negative publicity with respect to the Company or the mining industry in general; planned work programs; permitting; and community relations. Readers are cautioned not to place undue reliance on forward-looking statements. The Company does not intend, and expressly disclaims any intention or obligation to, update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as required by law.
Cautionary Note Regarding Deposit Comparisons and Surface Sampling. References in this news release to the Boliden deposit are provided as geological deposit-type and exploration-targeting analogues only. Mineralization hosted on adjacent or nearby properties, including the Boliden deposit, is not necessarily indicative of mineralization on the Company's properties, and these comparisons are not a prediction of the scale, grade, tonnage or economic potential of the Stavaträsk project. Historic production figures for the Boliden deposit are derived from third-party sources that the Company has not independently verified. Rock chip, grab and boulder (float) sample results referred to in this news release are selective by nature, are collected to identify the presence or tenor of mineralization, and are not necessarily representative of the grade or style of mineralization across the property. Historic drilling at Stavaträsk was completed by third parties and recoverable assay and collar data are largely unavailable; such historic results have not been verified by a Qualified Person and should not be relied upon. The Stavaträsk, Skellefteå North and Ådelfors projects do not have any mineral resource or mineral reserve estimates prepared in accordance with National Instrument 43-101, and there is no certainty that exploration will result in the delineation of any mineral resource.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news.
Figure 1: Map of Sweden (green) showing locations of properties Stavaträsk, Skellefteå North and Ådelfors
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5402/312120_36ef4aaf04cfdbde_004full.jpg
Figure 2: Geology map of the Skellefteå mineral belt, showing locations of major mining operations relative to the Stavaträsk and Skellefteå North properties.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5402/312120_36ef4aaf04cfdbde_005full.jpg
Figure 3: Plan view of the Stavaträsk project showing surface geochemistry and drilling results reported here from ST2606 and ST2607 across 650 m strike.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5402/312120_36ef4aaf04cfdbde_006full.jpg
Figure 4: Section A-B looking north across drillholes ST2601, ST2606, ST2607 showing results reported here from ST2606 and ST2607. Width of intrusive is approximately 65 m.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/5402/312120_36ef4aaf04cfdbde_007full.jpg
Table 1: Drill collar summary table.
| Hole ID | Depth (m) | Prospect | East (SWEREF 99 TM) | North (SWEREF 99 TM) | Elevation (m) | Dip | Azimuth |
| ST2601 | 149.0 | Stavaträsk | 751104 | 7224948 | 262 | -50 | 272 |
| ST2602 | 143.1 | Stavaträsk | 751140 | 7224849 | 269 | -50 | 272 |
| ST2603 | 122.1 | Stavaträsk | 751122 | 7224900 | 265 | -50 | 272 |
| ST2604 | 74.7 | Stavaträsk | 750808 | 7225443 | 221 | -50 | 237 |
| ST2605 | 78.6 | Stavaträsk | 750828 | 7225413 | 228 | -50 | 237 |
| ST2606 | 260.0 | Stavaträsk | 751025 | 7224947 | 268 | -50 | 90 |
| ST2607 | 212.5 | Stavaträsk | 751208 | 7224942 | 260 | -50 | 280 |
Table 2: Summary of Significant Assay Results (ST2606 - ST2607). Reported lengths are downhole (core) lengths; the true thickness of the mineralized intervals is not yet known.
Composite intervals @ 0.5 g/t cut-off, max 2 m waste:
| Hole ID | From (m) | To (m) | Int (m) | Au (g/t) | Ag (g/t) | As (%) | Te (ppm) |
| ST2606 | 46.45 | 53.45 | 7.00 | 2.6 | 4.7 | 0.6 | 3.4 |
| ST2606 | 62.45 | 64.45 | 2.00 | 1.5 | 0.8 | 0.5 | 2.0 |
| ST2606 | 79.45 | 84.00 | 4.55 | 7.2 | 14.5 | 1.2 | 9.3 |
| ST2606 | 102.05 | 108.60 | 6.55 | 1.3 | 1.2 | 0.3 | 1.5 |
| ST2606 | 140.50 | 141.50 | 1.00 | 0.5 | 1.2 | 0.8 | 6.4 |
| ST2607 | 132.65 | 133.65 | 1.00 | 0.6 | 1.0 | 0.5 | 2.0 |
| ST2607 | 151.80 | 152.80 | 1.00 | 0.6 | 0.2 | 0.0 | 0.1 |
| ST2607 | 166.20 | 169.42 | 3.22 | 1.4 | 2.2 | 0.3 | 2.1 |
High-grade sub-intervals @ 3 g/t:
| Hole ID | From (m) | To (m) | Int (m) | Au (g/t) | Ag (g/t) | As (%) | Te (ppm) |
| ST2606 | 49.45 | 50.45 | 1.00 | 15.1 | 28.4 | 3.3 | 19.3 |
| ST2606 | 79.45 | 81.35 | 1.90 | 15.7 | 31.7 | 2.4 | 18.7 |
| ST2607 | 168.77 | 169.42 | 0.65 | 5.1 | 6.3 | 1.0 | 8.1 |
Table 3: All individual assays from ST2606 and ST2607 grading ≥0.1 g/t Au. Gold is reported to two decimal places, other assays are reported to one decimal place and sample intervals to two decimal places.
| Hole ID | From (m) | To (m) | Int (m) | Au (g/t) | Ag (g/t) | As (%) | Te (ppm) |
| ST2606 | 19.00 | 20.00 | 1.00 | 0.11 | 0.5 | 0.2 | 0.3 |
| ST2606 | 28.00 | 29.00 | 1.00 | 0.43 | 0.7 | 0.1 | 1.1 |
| ST2606 | 29.00 | 30.00 | 1.00 | 0.14 | 0.6 | 0.7 | 1.0 |
| ST2606 | 33.95 | 34.60 | 0.65 | 0.50 | 14.5 | 0.1 | 0.9 |
| ST2606 | 44.60 | 45.60 | 1.00 | 0.16 | 0.2 | 0.0 | 0.2 |
| ST2606 | 46.45 | 47.45 | 1.00 | 0.61 | 0.3 | 0.1 | 1.3 |
| ST2606 | 48.45 | 49.45 | 1.00 | 1.74 | 1.7 | 0.2 | 1.7 |
| ST2606 | 49.45 | 50.45 | 1.00 | 15.10 | 28.4 | 3.3 | 19.3 |
| ST2606 | 50.45 | 51.45 | 1.00 | 0.11 | 0.5 | 0.0 | 0.3 |
| ST2606 | 52.45 | 53.45 | 1.00 | 0.61 | 1.2 | 0.1 | 0.6 |
| ST2606 | 56.45 | 57.45 | 1.00 | 0.12 | 0.3 | 0.1 | 0.6 |
| ST2606 | 58.45 | 59.45 | 1.00 | 0.10 | 0.4 | 0.1 | 0.8 |
| ST2606 | 61.45 | 62.45 | 1.00 | 0.11 | 0.4 | 0.0 | 0.1 |
| ST2606 | 62.45 | 63.45 | 1.00 | 1.87 | 0.8 | 0.9 | 1.6 |
| ST2606 | 63.45 | 64.45 | 1.00 | 1.18 | 0.9 | 0.2 | 2.4 |
| ST2606 | 73.45 | 74.45 | 1.00 | 0.17 | 0.7 | 0.0 | 0.4 |
| ST2606 | 76.45 | 77.45 | 1.00 | 0.41 | 0.7 | 0.0 | 0.5 |
| ST2606 | 77.45 | 78.45 | 1.00 | 0.22 | 2.3 | 0.0 | 0.2 |
| ST2606 | 79.45 | 80.00 | 0.55 | 20.70 | 16.3 | 7.2 | 37.7 |
| ST2606 | 80.00 | 80.73 | 0.73 | 21.40 | 29.5 | 0.8 | 15.9 |
| ST2606 | 80.73 | 80.92 | 0.19 | 0.52 | 6.0 | 0.0 | 0.5 |
| ST2606 | 80.92 | 81.35 | 0.43 | 6.51 | 66.4 | 0.2 | 7.4 |
| ST2606 | 81.35 | 81.60 | 0.25 | 0.16 | 2.8 | 0.0 | 0.1 |
| ST2606 | 81.60 | 82.00 | 0.40 | 0.68 | 6.7 | 0.2 | 2.5 |
| ST2606 | 82.00 | 83.00 | 1.00 | 0.95 | 1.1 | 0.0 | 1.8 |
| ST2606 | 83.00 | 84.00 | 1.00 | 1.69 | 1.2 | 0.6 | 4.0 |
| ST2606 | 94.00 | 95.00 | 1.00 | 0.14 | 0.4 | 0.0 | 0.4 |
| ST2606 | 97.00 | 97.30 | 0.30 | 0.23 | 1.0 | 0.6 | 2.1 |
| ST2606 | 102.05 | 103.05 | 1.00 | 2.40 | 1.2 | 0.1 | 3.4 |
| ST2606 | 103.05 | 104.05 | 1.00 | 0.46 | 1.6 | 0.4 | 1.0 |
| ST2606 | 105.05 | 105.80 | 0.75 | 1.16 | 1.0 | 0.4 | 1.3 |
| ST2606 | 105.80 | 106.80 | 1.00 | 2.05 | 1.0 | 0.2 | 1.4 |
| ST2606 | 106.80 | 107.12 | 0.32 | 0.17 | 0.5 | 0.5 | 0.9 |
| ST2606 | 107.12 | 108.05 | 0.93 | 2.39 | 2.5 | 0.9 | 2.2 |
| ST2606 | 108.05 | 108.60 | 0.55 | 0.78 | 1.1 | 0.3 | 0.8 |
| ST2606 | 109.35 | 109.85 | 0.50 | 0.14 | 0.6 | 0.2 | 0.4 |
| ST2606 | 109.85 | 110.35 | 0.50 | 0.22 | 0.5 | 0.3 | 0.7 |
| ST2606 | 113.25 | 113.80 | 0.55 | 0.33 | 1.0 | 0.3 | 0.9 |
| ST2606 | 119.10 | 120.10 | 1.00 | 0.10 | 0.6 | 0.1 | 0.4 |
| ST2606 | 122.10 | 123.00 | 0.90 | 0.15 | 0.6 | 0.6 | 1.1 |
| ST2606 | 128.00 | 129.00 | 1.00 | 0.11 | 0.6 | 0.0 | 0.3 |
| ST2606 | 134.00 | 134.70 | 0.70 | 0.21 | 0.4 | 0.1 | 0.6 |
| ST2606 | 140.50 | 141.50 | 1.00 | 0.51 | 1.2 | 0.8 | 6.4 |
| ST2606 | 148.35 | 148.75 | 0.40 | 0.25 | 0.8 | 0.1 | 0.9 |
| ST2606 | 167.40 | 168.40 | 1.00 | 0.16 | 0.8 | 0.1 | 3.0 |
| ST2606 | 174.80 | 175.47 | 0.67 | 0.26 | 0.3 | 0.4 | 0.9 |
| ST2606 | 176.90 | 177.50 | 0.60 | 0.43 | 0.6 | 0.3 | 1.3 |
| ST2606 | 198.50 | 199.50 | 1.00 | 0.16 | 0.5 | 0.2 | 0.4 |
| ST2606 | 199.50 | 200.50 | 1.00 | 0.16 | 0.4 | 0.1 | 0.4 |
| ST2606 | 207.50 | 208.50 | 1.00 | 0.18 | 0.3 | 0.1 | 0.8 |
| ST2606 | 213.85 | 214.20 | 0.35 | 0.15 | 0.4 | 0.0 | 0.4 |
| ST2606 | 215.20 | 216.10 | 0.90 | 0.31 | 0.6 | 0.3 | 1.3 |
| ST2607 | 123.95 | 124.60 | 0.65 | 0.35 | 0.7 | 0.2 | 1.8 |
| ST2607 | 126.60 | 127.35 | 0.75 | 0.12 | 0.5 | 0.2 | 0.7 |
| ST2607 | 131.70 | 132.65 | 0.95 | 0.30 | 0.7 | 0.2 | 1.1 |
| ST2607 | 132.65 | 133.65 | 1.00 | 0.60 | 1.0 | 0.5 | 2.0 |
| ST2607 | 140.80 | 141.35 | 0.55 | 0.22 | 0.4 | 0.1 | 0.8 |
| ST2607 | 144.65 | 145.65 | 1.00 | 0.23 | 0.4 | 0.1 | 0.4 |
| ST2607 | 145.65 | 146.30 | 0.65 | 0.26 | 0.6 | 1.5 | 1.8 |
| ST2607 | 151.80 | 152.80 | 1.00 | 0.58 | 0.2 | 0.0 | 0.1 |
| ST2607 | 163.35 | 164.35 | 1.00 | 0.11 | 0.5 | 0.1 | 0.5 |
| ST2607 | 165.30 | 166.20 | 0.90 | 0.20 | 2.1 | 0.3 | 0.5 |
| ST2607 | 166.20 | 167.00 | 0.80 | 1.19 | 1.8 | 0.1 | 1.1 |
| ST2607 | 168.77 | 169.42 | 0.65 | 5.08 | 6.3 | 1.0 | 8.1 |
| ST2607 | 169.42 | 170.30 | 0.88 | 0.13 | 0.2 | 0.0 | 0.3 |
| ST2607 | 171.03 | 171.80 | 0.77 | 0.20 | 0.2 | 0.4 | 0.9 |
| ST2607 | 172.80 | 173.80 | 1.00 | 0.21 | 0.3 | 0.0 | 0.3 |
| ST2607 | 194.05 | 195.05 | 1.00 | 0.10 | 0.4 | 0.1 | 0.5 |
| ST2607 | 196.07 | 196.90 | 0.83 | 0.26 | 0.4 | 0.1 | 0.5 |
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/312120