LAURION Intersects 1.80 m @ 17.10 g/t Au and 9.24 g/t Ag, Including 0.80 m @ 31.50 g/t Au and 15.60 g/t Ag, and 10.05 m @ 1.11 g/t Au and 2.12 g/t Ag, Including 1.85 m @ 4.11 g/t Au and 8.23 g/t Ag, in LBX26-117 at Ishkōday's A-Zone
Sentiment and the balance of points
Rhea-AI Sentiment reads the wording of the document, how positive or negative its language is on a 1 to 5 scale. The balance of points shown with the takes weighs what the document actually discloses, so the two can disagree, for example when a trial that missed its main goal is described in upbeat language.
Rhea-AI Summary
LAURION Mineral Exploration (LMEFF) reported Ishkōday A-Zone drilling results including 1.80 metres grading 17.10 grams of gold per tonne in LBX26-117. That interval included 0.80 metres at 31.50 grams of gold per tonne. A deeper 10.05-metre interval graded 1.112 grams of gold per tonne and 2.12 grams of silver per tonne.
The results cover six holes totalling 1,227 metres, not the entire program. LAURION expanded planned Phase 1 drilling from 3,865 to 5,605 metres across 22 holes, guided by SRK Consulting’s five priority target areas. The company aims to improve geological understanding and support evaluation of a potential maiden mineral resource estimate. Additional targets, sequencing and timing depend on ongoing results and available financing. LBX26-113 returned lower grades than historical hole 92-65, which it was designed to verify; LAURION will evaluate the implications for that hole’s historical database and geological interpretation.
How this balance works
Rhea-AI gives every point it takes from this document a weight. Minor counts 1, Moderate 3 and Major 9, so one Major point outweighs several Minor ones. The bar adds up the weights on each side, and when neither side holds more than 65% of the total the balance reads Mixed.
It reads the document as published, with the same rules for every company, and it does not look at what the market expected or at how the stock traded, so a point can be objectively good on a day the stock falls.
Rhea-AI Sentiment measures something else, the tone of the wording.
Hollow bars mark forward-looking points. How the balance works
Positive
- Moderate point. Forward-looking: it has not happened yet and may not happen.Phase 1 planned drilling expanded from 3,865 to 5,605 metres across 22 holes.
- Minor pointLBX26-117 returned 1.80 m at 17.10 g/t gold and 9.24 g/t silver, including 0.80 m at 31.50 g/t gold.
- Minor pointLBX26-117 returned 10.05 m at 1.112 g/t gold, including 1.85 m at 4.107 g/t gold and 2.19% zinc.
- Minor pointLBX26-117 intersected 3.70 m at 0.927 g/t gold, including 1.10 m at 2.623 g/t gold.
- Minor pointLBX26-116 returned 2.80 m at 2.261 g/t gold, including 0.80 m at 6.510 g/t gold.
6 minor points
- Minor pointLBX26-116 intersected 20.05 m at 0.411 g/t gold and 0.61% zinc, including 7.90 m at 0.730 g/t gold.
- Minor pointLBX26-121 returned 5.20 m at 1.067 g/t gold and 1.11% zinc, including 1.05 m at 3.467 g/t gold.
- Minor pointLBX26-121 intersected 0.50 m at 8.980 g/t gold and, separately, 0.65 m at 6.240 g/t gold.
- Minor pointLBX26-115 returned 4.35 m at 0.820 g/t gold, including 1.30 m at 2.356 g/t gold.
- Minor pointLBX26-115 also intersected 1.10 m at 1.218 g/t gold and 0.86% zinc.
- Minor pointLBX26-114A returned 1.50 m at 0.788 g/t gold and, separately, 1.20 m at 3.61% zinc.
Negative
- Minor pointLBX26-113 returned lower grades than historical hole 92-65, prompting evaluation of the historical data and interpretation.
- Minor point. Forward-looking: it has not happened yet and may not happen.Additional drilling targets, sequencing and timing remain subject to ongoing results and available financing.
- Minor pointLBX26-114 was abandoned due to an orientation issue and replaced by LBX26-114A.
- Minor point. Forward-looking: it has not happened yet and may not happen.LBX26-121’s specific geological target remains to be confirmed.
News Explained
The additional intersections add assay data, but their reported lengths are drilled thicknesses, not established true widths.
LAURION reports A-Zone assays including 2.80 metres grading 2.261 grams of gold per tonne in LBX26-116 and 5.20 metres grading 1.067 grams per tonne in LBX26-121, adding drill-intersection data to its geological evaluation.
The company says core lengths are drilled thicknesses and true widths have not yet been determined, so the reported lengths do not establish actual mineralized widths.
AI-generated analysis. How Rhea-AI works. Not financial advice.
TORONTO, Ontario — October 29, 2026 - TheNewswire — LAURION Mineral Exploration Inc. (TSX-V: LME | OTC: LMEFF | FSE: 5YD) (“LAURION” or the “Company”) is pleased to report assay results from drill holes LBX26-113, LBX26-114A, LBX26-115, LBX26-116, LBX26-117 and LBX26-121, from its 2026 Phase 1 diamond drilling program at its
Building on the drilling program to date, LAURION increased its planned Phase 1 drilling from 3,865 metres to 5,605 metres across 22 drill holes. The expanded program is being informed by SRK Consulting’s independent structural gap analysis of the A-Zone, which identified five priority target areas where additional drilling may address key gaps in the existing drill database and further strengthen the geological understanding of the A-Zone. LAURION is using this framework, together with ongoing drill results, to prioritize near-term drilling as it continues to systematically advance its exploration of the A-Zone, with the objective of validating its geological interpretation and supporting the evaluation of a potential maiden Mineral Resource Estimate (“MRE”). Additional targets, sequencing and timing remain subject to, among other things, ongoing results and available financing.
Cynthia Le Sueur-Aquin, President and CEO, commented: “LBX26-117 returned 1.80 metres grading 17.10 g/t gold, including 0.80 metres at 31.50 g/t gold, together with a broader 10.05-metre interval of gold-bearing polymetallic mineralization deeper in the hole. LBX26-121, drilled from the same collar at a shallower angle, intersected gold at several levels, including 5.20 metres grading 1.067 g/t gold with
Highlights of Assays Are as Follows:
-
1.80 m grading17.100 g/t Au, 9.24 g/t Ag (91.50–93.30 m), including 0.80 m grading 31.500 g/t Au and 15.60 g/t Ag (92.00–92.80 m).
-
3.70 m grading 0.927 g/t Au, 2.10 g/t Ag and
0.29% Zn (127.50–131.20 m), including 1.10 m grading 2.623 g/t Au and 2.85 g/t Ag (128.90–130.00 m). -
10.05 m grading 1.112 g/t Au, 2.12 g/t Ag and
0.51% Zn (160.25–170.30 m), including 1.85 m grading 4.107 g/t Au, 8.23 g/t Ag,0.23% Cu and2.19% Zn (160.25–162.10 m), including 0.60 m grading 9.500 g/t Au, 19.10 g/t Ag,0.49% Cu and3.79% Zn (160.90–161.50 m).
-
2.80 m grading 2.261 g/t Au, 8.06 g/t Ag,
0.15% Cu and0.10% Zn (134.00-136.80m), including 0.80 m grading 6.510 g/t Au, 21.50 g/t Ag,0.43% Cu and0.24% Zn (134.75-135.55m). -
20.05 m grading 0.411 g/t Au, 3.76 g/t Ag and
0.61% Zn (162.40-182.45m), including 7.90 m grading 0.730 g/t Au, 4.88 g/t Ag and0.86% Zn (167.50-175.40m), including 0.50 m grading 3.050 g/t Au, 56.50 g/t Ag,0.14% Cu and4.89% Zn (172.85-173.35m).
-
4.35 m grading 0.820 g/t Au, 9.65 g/t Ag and
0.66% Zn (37.20–41.55 m), including 1.30 m grading 2.356 g/t Au, 27.11 g/t Ag,0.23% Cu and2.06% Zn (38.10–39.40 m). -
1.10 m grading 1.218 g/t Au, 3.30 g/t Ag and
0.86% Zn (47.10–48.20 m).
-
5.20 m grading 1.067 g/t Au, 7.87 g/t Ag and
1.11% Zn (133.00–138.20 m), including 1.05 m grading 3.467 g/t Au, 18.93 g/t Ag and3.60% Zn (135.05–136.10 m). -
0.65 m grading 6.240 g/t Au and 5.60 g/t Ag (192.85–193.50 m).
Six holes totalling 1,227 m are discussed in this release. This figure is not the total 2026 program metreage.
|
Actual Hole ID |
Easting |
Northing |
Azimuth |
Dip |
Final Length (m) |
|
LBX26-113 |
446625 |
5513190 |
125.60° |
−75.12° |
129 |
|
LBX26-114A |
446615 |
5513190 |
135.34° |
−60.04° |
159 |
|
LBX26-115 |
446597 |
5513165 |
128.20° |
−45.26° |
153 |
|
LBX26-116 |
446329 |
5512704 |
112.00° |
−72.00° |
279 |
|
LBX26-117 |
446281 |
5512621 |
110.00° |
−67.00° |
306 |
|
LBX26-121 |
446281 |
5512621 |
110.00° |
−45.00° |
201 |
|
Total |
1,227 |
LBX26-113 was designed as a twin of historical hole 92-65 to verify previously reported high-grade gold and polymetallic mineralization. The new assays returned lower grades than the historical results. The Company will evaluate the implications for the historical drill database for this hole and their geological interpretation.
|
Hole ID |
From (m) |
To (m) |
Length (m) |
Au g/t |
Ag g/t |
Cu % |
Zn % |
|
LBX26-113 |
28.00 |
30.00 |
2.00 |
0.234 |
0.39 |
0.01 |
0.01 |
|
LBX26-113 |
42.00 |
44.50 |
2.50 |
0.191 |
3.96 |
0.03 |
0.32 |
|
including |
42.50 |
43.00 |
0.50 |
0.460 |
13.00 |
0.09 |
1.27 |
|
LBX26-113 |
52.50 |
54.50 |
2.00 |
0.450 |
4.45 |
0.04 |
0.25 |
|
including |
52.50 |
53.50 |
1.00 |
0.624 |
8.10 |
0.08 |
0.46 |
|
LBX26-113 |
58.80 |
60.10 |
1.30 |
0.348 |
0.55 |
0.01 |
0.23 |
|
LBX26-113 |
64.00 |
68.00 |
4.00 |
0.321 |
0.51 |
0.01 |
0.32 |
|
including |
67.30 |
68.00 |
0.70 |
1.320 |
1.00 |
0.01 |
0.74 |
|
LBX26-113 |
88.50 |
89.00 |
0.50 |
0.412 |
0.25 |
0.01 |
0.03 |
|
LBX26-113 |
116.80 |
117.30 |
0.50 |
0.481 |
5.40 |
0.10 |
1.66 |
LBX26-114A and LBX26-115 – A-Zone
Targeted infill drilling designed to address identified gaps in the existing drill database and refine interpretations of mineralization between earlier intersections. LBX26-114A replaced LBX26-114 after it was abandoned due to an orientation issue.
|
Hole ID |
From (m) |
To (m) |
Length (m) |
Au g/t |
Ag g/t |
Cu % |
Zn % |
|
LBX26-114A |
21.50 |
22.00 |
0.50 |
0.547 |
1.80 |
0.01 |
0.01 |
|
LBX26-114A |
34.50 |
44.50 |
10.00 |
0.194 |
3.43 |
0.02 |
0.15 |
|
including |
34.50 |
35.20 |
0.70 |
0.588 |
16.80 |
0.08 |
0.89 |
|
LBX26-114A |
50.00 |
55.00 |
5.00 |
0.188 |
1.54 |
0.02 |
0.36 |
|
including |
53.30 |
54.50 |
1.20 |
0.203 |
2.01 |
0.04 |
1.11 |
|
LBX26-114A |
62.00 |
62.50 |
0.50 |
0.116 |
0.25 |
0.01 |
0.05 |
|
LBX26-114A |
65.90 |
67.30 |
1.40 |
0.273 |
1.46 |
0.02 |
0.34 |
|
including |
66.80 |
67.30 |
0.50 |
0.512 |
2.10 |
0.03 |
0.74 |
|
LBX26-114A |
69.00 |
70.00 |
1.00 |
0.158 |
0.25 |
— |
0.02 |
|
LBX26-114A |
78.00 |
79.50 |
1.50 |
0.341 |
0.25 |
0.01 |
0.59 |
|
including |
78.50 |
79.00 |
0.50 |
0.522 |
0.25 |
0.01 |
1.36 |
|
LBX26-114A |
94.00 |
95.50 |
1.50 |
0.122 |
0.25 |
— |
0.03 |
|
LBX26-114A |
100.50 |
102.00 |
1.50 |
0.112 |
0.25 |
— |
0.02 |
|
LBX26-114A |
105.00 |
105.50 |
0.50 |
0.109 |
0.25 |
— |
0.02 |
|
LBX26-114A |
111.50 |
113.00 |
1.50 |
0.788 |
0.88 |
0.02 |
0.15 |
|
including |
111.50 |
112.00 |
0.50 |
1.215 |
1.80 |
0.04 |
0.36 |
|
LBX26-114A |
119.60 |
120.10 |
0.50 |
0.331 |
0.25 |
— |
0.02 |
|
LBX26-114A |
133.60 |
134.50 |
0.90 |
0.136 |
0.25 |
— |
0.02 |
|
LBX26-114A |
144.00 |
144.50 |
0.50 |
0.126 |
0.90 |
0.03 |
0.08 |
|
LBX26-114A |
155.80 |
157.00 |
1.20 |
0.295 |
1.58 |
0.05 |
3.61 |
|
Hole ID |
From (m) |
To (m) |
Length (m) |
Au g/t |
Ag g/t |
Cu % |
Zn % |
|
LBX26-115 |
37.20 |
41.55 |
4.35 |
0.820 |
9.65 |
0.08 |
0.66 |
|
including |
38.10 |
39.40 |
1.30 |
2.356 |
27.11 |
0.23 |
2.06 |
|
LBX26-115 |
47.10 |
48.20 |
1.10 |
1.218 |
3.30 |
0.02 |
0.86 |
|
including |
47.10 |
47.65 |
0.55 |
2.110 |
5.50 |
0.04 |
1.66 |
|
LBX26-115 |
49.60 |
52.50 |
2.90 |
0.385 |
1.82 |
0.02 |
0.30 |
|
LBX26-115 |
56.05 |
57.80 |
1.75 |
0.200 |
0.79 |
0.01 |
0.14 |
|
LBX26-115 |
65.00 |
67.30 |
2.30 |
0.237 |
0.65 |
0.01 |
0.13 |
|
including |
66.80 |
67.30 |
0.50 |
0.636 |
1.60 |
0.02 |
0.32 |
|
LBX26-115 |
69.60 |
70.20 |
0.60 |
0.300 |
0.50 |
0.01 |
0.01 |
|
LBX26-115 |
71.00 |
72.00 |
1.00 |
0.131 |
0.60 |
— |
0.02 |
|
LBX26-115 |
105.80 |
106.30 |
0.50 |
0.191 |
1.50 |
0.01 |
0.03 |
|
LBX26-115 |
110.90 |
112.50 |
1.60 |
0.293 |
0.68 |
— |
0.01 |
|
LBX26-115 |
115.80 |
116.50 |
0.70 |
0.149 |
0.25 |
— |
0.03 |
|
LBX26-115 |
130.00 |
131.20 |
1.20 |
0.173 |
0.25 |
— |
0.01 |
LBX26-116 and LBX26-117 – A-Zone
Targeted additional drill coverage to improve understanding of mineralized horizons, their geometry and possible continuity.
|
Hole ID |
From (m) |
To (m) |
Length (m) |
Au g/t |
Ag g/t |
Cu % |
Zn % |
|
LBX26-116 |
16.10 |
16.60 |
0.50 |
0.203 |
0.25 |
0.01 |
0.01 |
|
LBX26-116 |
32.00 |
32.60 |
0.60 |
0.338 |
0.60 |
0.01 |
0.02 |
|
LBX26-116 |
89.00 |
90.00 |
1.00 |
0.497 |
0.25 |
0.01 |
0.01 |
|
LBX26-116 |
99.90 |
104.80 |
4.90 |
0.248 |
0.88 |
0.01 |
0.06 |
|
including |
102.00 |
103.70 |
1.70 |
0.396 |
1.34 |
0.02 |
0.11 |
|
LBX26-116 |
108.00 |
110.10 |
2.10 |
0.122 |
2.31 |
0.05 |
1.12 |
|
including |
109.60 |
110.10 |
0.50 |
0.399 |
6.70 |
0.10 |
3.84 |
|
LBX26-116 |
127.95 |
128.45 |
0.50 |
0.996 |
1.80 |
0.01 |
0.03 |
|
LBX26-116 |
129.80 |
130.30 |
0.50 |
0.722 |
3.80 |
0.07 |
0.11 |
|
LBX26-116 |
134.00 |
136.80 |
2.80 |
2.261 |
8.06 |
0.15 |
0.10 |
|
including |
134.75 |
135.55 |
0.80 |
6.510 |
21.50 |
0.43 |
0.24 |
|
LBX26-116 |
141.30 |
141.8 |
0.50 |
0.243 |
0.80 |
0.01 |
0.03 |
|
LBX26-116 |
155.30 |
156.00 |
0.70 |
0.216 |
0.25 |
— |
0.03 |
|
LBX26-116 |
162.40 |
182.45 |
20.05 |
0.411 |
3.76 |
0.02 |
0.61 |
|
including |
167.50 |
175.40 |
7.90 |
0.730 |
4.88 |
0.02 |
0.86 |
|
including |
172.85 |
173.35 |
0.50 |
3.050 |
56.50 |
0.14 |
4.89 |
|
LBX26-116 |
188.85 |
190.50 |
1.65 |
0.149 |
0.82 |
0.01 |
0.06 |
|
LBX26-116 |
202.00 |
203.50 |
1.50 |
0.269 |
0.25 |
0.01 |
0.03 |
|
LBX26-116 |
262.40 |
263.00 |
0.60 |
0.311 |
2.00 |
0.17 |
0.82 |
|
LBX26-116 |
271.50 |
273.00 |
1.50 |
1.025 |
0.80 |
— |
0.04 |
|
Hole ID |
From (m) |
To (m) |
Length (m) |
Au g/t |
Ag g/t |
Cu % |
Zn % |
|
LBX26-117 |
81.20 |
81.70 |
0.50 |
0.192 |
0.60 |
0.01 |
0.02 |
|
LBX26-117 |
84.90 |
85.50 |
0.60 |
0.264 |
1.50 |
0.03 |
0.05 |
|
LBX26-117 |
91.50 |
93.30 |
1.80 |
17.10 |
9.24 |
0.07 |
0.05 |
|
including |
92.00 |
92.80 |
0.80 |
31.50 |
15.60 |
0.10 |
0.05 |
|
LBX26-117 |
94.80 |
97.40 |
2.60 |
0.154 |
1.84 |
0.02 |
0.03 |
|
LBX26-117 |
111.90 |
112.80 |
0.90 |
0.166 |
1.20 |
0.02 |
0.05 |
|
LBX26-117 |
125.50 |
126.30 |
0.80 |
0.142 |
0.80 |
0.03 |
0.32 |
|
LBX26-117 |
127.50 |
131.20 |
3.70 |
0.927 |
2.10 |
0.05 |
0.29 |
|
including |
128.90 |
130.00 |
1.10 |
2.623 |
2.85 |
0.07 |
0.07 |
|
LBX26-117 |
133.00 |
133.75 |
0.75 |
0.139 |
0.60 |
- |
0.01 |
|
LBX26-117 |
148.00 |
150.00 |
2.00 |
0.122 |
0.475 |
0.02 |
0.03 |
|
LBX26-117 |
160.25 |
170.30 |
10.05 |
1.112 |
2.12 |
0.05 |
0.51 |
|
including |
160.25 |
162.10 |
1.85 |
4.107 |
8.23 |
0.23 |
2.19 |
|
including |
160.90 |
161.50 |
0.60 |
9.500 |
19.10 |
0.49 |
3.79 |
|
LBX26-117 |
176.50 |
177.00 |
0.50 |
0.496 |
8.40 |
0.02 |
2.36 |
|
LBX26-117 |
181.80 |
182.80 |
1.00 |
0.127 |
1.20 |
0.06 |
0.10 |
|
LBX26-117 |
218.50 |
219.50 |
1.00 |
0.118 |
0.25 |
- |
0.01 |
Drilled from the same collar location as LBX26-117 at a shallower planned dip, to examine a different portion of the subsurface sequence. Specific geological target remains to be confirmed.
|
Hole ID |
From (m) |
To (m) |
Length (m) |
Au g/t |
Ag g/t |
Cu % |
Zn % |
|
LBX26-121 |
45.40 |
46.35 |
0.95 |
1.345 |
0.50 |
0.01 |
0.07 |
|
LBX26-121 |
58.80 |
59.80 |
1.00 |
0.323 |
0.25 |
- |
0.01 |
|
LBX26-121 |
85.65 |
86.20 |
0.55 |
0.350 |
0.90 |
0.02 |
0.13 |
|
LBX26-121 |
112.95 |
115.00 |
2.05 |
0.154 |
1.20 |
0.02 |
0.13 |
|
LBX26-121 |
119.00 |
121.00 |
2.00 |
0.162 |
0.95 |
0.02 |
0.27 |
|
LBX26-121 |
124.00 |
127.40 |
3.40 |
0.173 |
0.90 |
0.01 |
0.21 |
|
including |
126.80 |
127.40 |
0.60 |
0.529 |
2.40 |
0.01 |
0.88 |
|
LBX26-121 |
133.00 |
138.20 |
5.20 |
1.067 |
7.87 |
0.06 |
1.11 |
|
including |
135.05 |
136.10 |
1.05 |
3.467 |
18.93 |
0.08 |
3.60 |
|
LBX26-121 |
149.40 |
149.90 |
0.50 |
8.980 |
14.00 |
0.01 |
0.07 |
|
LBX26-121 |
156.20 |
156.70 |
0.50 |
0.717 |
14.50 |
0.19 |
0.92 |
|
LBX26-121 |
160.60 |
161.30 |
0.70 |
0.220 |
1.20 |
0.01 |
0.03 |
|
LBX26-121 |
187.50 |
188.00 |
0.50 |
0.125 |
8.60 |
0.14 |
0.10 |
|
LBX26-121 |
192.85 |
193.50 |
0.65 |
6.240 |
5.60 |
0.01 |
0.02 |
Note: All core lengths are drilled thicknesses; true widths have not yet been determined. Intervals are calculated using a nominal cut-off and may include internal dilution; “including” intervals are sub-intervals of higher grade contained within the reported interval.
Sampling and QA/QC Protocols
All drill core is transported and stored inside the core logging facility located at the Ishkōday Project in Greenstone, Ontario.
LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory. After logging, core samples were identified and then cut in half along the core axis in the same building and then zip tied individually in plastic sample bags with a bar code. Approximately five or six of these individual bags were then stacked into a “rice” white material bag and stored on a skid for final shipment to the laboratory. All core samples were shipped to the ALS Global Geochemistry facility in Thunder Bay, Ontario, where they were prepared, and the resulting pulps were analyzed by ALS Global Analytical Lab in North Vancouver, British Columbia. ALS is independent of LAURION. Samples are processed by 4-acid digestion and analyzed by fire assay on 50 g pulps and ICP-AES (Inductively Coupled Plasma – Atomic Emission Spectroscopy).
Over limit analyses are reprocessed with gravimetric finish. A total of
QA/QC review of standards and duplicates indicates analytical results are reliable. One zinc standard adjacent to a high-grade zinc interval returned elevated values consistent with expected analytical behaviour following high-grade samples.
Qualified Person
The technical contents of this press release have been reviewed and approved by Dr. Trevor Boyd, Ph.D., P.Geo., a consultant to LAURION and a Qualified Person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”). Dr. Boyd is independent of the Company within the meaning of NI 43-101.
LAURION Mineral Exploration Inc. is a mid-stage Canadian mineral exploration company, focused on advancing the
The Ishkōday Project covers approximately 57 km² within the Beardmore–Geraldton and Onaman–Tashota Greenstone Belts and hosts a single 6.0 km by 2.5 km mineralized corridor. Historical and modern exploration programs have completed over 100,000 metres of drilling, confirming a large and evolving gold-rich polymetallic mineral system.
LAURION’s strategy emphasizes disciplined, data-driven exploration, systematic technical advancement, integrated geological modelling, and responsible capital allocation. The Company is focused on strengthening geological confidence, expanding the scale of the mineral system, and positioning the project for a potential future MRE.
LAURION continues to evaluate opportunities that may enhance project development flexibility, including potential non-dilutive initiatives such as the evaluation of historical surface stockpile processing. The Company’s objective is to build technical clarity, scale, and long-term project value before monetization, with the aim that future development decisions or strategic opportunities are supported by strong geological foundations and reduced execution risk.
Cynthia Le Sueur-Aquin, President and CEO of LAURION, is the Company’s largest shareholder, holding 17,221,306 common shares, reflecting strong alignment between management and shareholders.
For Further Information, Contact:
LAURION Mineral Exploration Inc.
Cynthia Le Sueur-Aquin – President and CEO
Tel: 1-705-788-9186 Fax: 1-705-805-9256
Douglas Vass - Investor Relations Consultant
Email: info@laurion.ca
Website: http://www.LAURION.ca
Follow us on: X (@LAURION_LME), Instagram (laurionmineral) and LinkedIn
Caution Regarding Forward-Looking Information:
This press release contains forward-looking statements, which reflect the Company’s current expectations regarding future events including with respect to LAURION’s business, operations and condition, management’s objectives, strategies, beliefs and intentions, the Company’s ability to advance the Ishkōday Project and achieve the Company’s strategic and technical objectives (within the above-stated timeframes, if at all), including with respect to the Company’s expectations regarding the MRE, the nature, focus, timing and potential results of the Company’s exploration, drilling and prospecting activities, including the Company’s exploration program and planned exploration and drilling activities referenced in this press release, and the statements regarding the Company’s exploration or consideration of any possible strategic alternatives and transactional opportunities, as well as the potential outcome(s) of this process, the possible impact of any potential transactions referenced herein on the Company or any of its stakeholders, and the ability of the Company to identify and complete any potential acquisitions, mergers, financings or other transactions referenced herein, and the timing of any such transactions.
The forward-looking statements involve risks and uncertainties. Actual events and future results, performance or achievements expressed or implied by such forward-looking statements could differ materially from those projected herein including as a result of a change in the trading price of the common shares of LAURION, the failure to obtain the consents, permits and/or approvals from applicable governmental bodies, regulators and First Nations communities, required in connection with the Company’s strategic and technical objectives, the risk that additional drilling and/or future results may not support the preparation of an MRE, the TSX Venture Exchange or any other applicable regulator not providing its approval for any strategic alternatives or transactional opportunities, the interpretation and actual results of current exploration activities, changes in project parameters as plans continue to be refined, future prices of gold and/or other metals, possible variations in grade or recovery rates, failure of equipment or processes to operate as anticipated, the failure of contracted parties to perform, labor disputes and other risks of the mining industry, delays in obtaining governmental approvals or financing or in the completion of exploration, as well as those factors disclosed in the Company’s publicly filed documents. Investors should consult the Company’s ongoing quarterly and annual filings, as well as any other additional documentation comprising the Company’s public disclosure record, for additional information on risks and uncertainties relating to these forward-looking statements. The reader is cautioned not to rely on these forward-looking statements. Subject to applicable law, the Company disclaims any obligation to update these forward-looking statements. Readers are cautioned to not place undue reliance on the assay values reported in this press release. References to historical workings, historical exploration results and historical mining activities are provided for context only. Historical information may not be reliable and should not be interpreted as an indication of current mineral resources, mineral reserves or future exploration results.
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THE CONTENT OF THIS NEWS RELEASE.
Copyright (c) 2026 TheNewswire - All rights reserved.
FAQ
AI-generated questions and answers. How Rhea-AI works. Not financial advice.