NETGEAR Brings New Ruggedized Switching and Anywhere, Anytime Network Configuration to ISE 2026

Key Terms

poe++ technical

poe++ is an enhanced version of Power over Ethernet, a technology that lets a single network cable carry both data and significant electrical power to devices. Think of it as a stronger, combined power-and-data cable that can run higher-power equipment (like advanced cameras or digital signs) without separate power lines; investors watch it because wider adoption can boost demand for networking gear, lower installation costs, and enable new product categories.

wifi 7 technical

WiFi 7 is the next-generation wireless networking standard that delivers much higher speeds, lower delays, and the ability to support many devices at once—think of it as a wider, faster highway that lets more cars travel smoothly without traffic jams. For investors, it matters because widespread adoption can drive demand for upgraded consumer gadgets, routers, network gear and services, shaping revenue and competition across chipmakers, telecoms and infrastructure suppliers.

esim technical

An esim is a small, built-in electronic SIM card inside a phone, tablet or connected device that stores mobile network credentials digitally instead of using a removable plastic card. For investors it matters because it changes how carriers sell and manage subscriptions, lowers logistics costs for device makers, enables easier switching between networks or plans (including global roaming), and expands opportunities in Internet-of-Things connectivity and recurring revenue services.

New M4350 Switches and NETGEAR Engage Offline Provisioning Deliver More Power and Flexibility to AV and Broadcast Professionals

SAN JOSE, Calif.--(BUSINESS WIRE)-- NETGEAR®, Inc. (NASDAQ: NTGR) will be introducing two new IP switches in its M4350 series along with the latest version of the NETGEAR Engage™ Controller at ISE 2026, all of which directly address specific requirements of AV and broadcast integrators. That is, hardware built for real-world conditions, additional bandwidth for growing installations, and the ability to design and configure networks in advance of ever setting foot on-site.

NETGEAR introduces two new IP switches in its M4350 series along with the latest version of the NETGEAR Engage™ Controller at ISE 2026, all of which directly address specific requirements of AV and broadcast integrators.

The new M4350-16M4V switch employs industry-standard Neutrik® locking connectors throughout: etherCON® for network, opticalCON® for fiber, and powerCON® for power. This prevents connections from coming loose during load-in or failing mid-show. The M4350-16M4V also delivers 16 x 2.5G PoE++ ports (up to 1,130W total) and 4 x 25G SFP28 uplinks, with four modular interface card slots that allow configuration of uplink connectivity exactly as needed.

The new M4350-16C model addresses the throughput challenges in large AV-over-IP deployments, providing 16 ports of 100G connectivity. Designed for aggregation and core layers where multiple high-resolution video streams converge, the M4350-16C gives integrators the bandwidth they need.

The two new switches bring the M4350 portfolio to 18 models in total, covering 1G to 100G with high-power PoE++, redundant modular power supplies, and SMPTE ST 2110 timing support. TAA-compliant versions are available for government projects. The new models will be available in March 2026.

Version 2.4 of the NETGEAR Engage Controller network configuration software, available in February, introduces offline provisioning, giving integrators the ability to create virtual switches and WiFi 7 access points, design entire networks, and test configurations – all without physical hardware. Before arriving on site, the network is already built. Users can simply export configurations, connect the devices, and deploy. Configurations can also be saved as reusable templates for similar installations.

“Integrators told us their biggest pain points: too much time on-site, cables that come loose during critical moments, and networks that are hard to scale. We listened,” said Laurent Masia, senior director product management at NETGEAR. “Offline provisioning means you can configure networks from anywhere and deploy in minutes. Neutrik locking connectors ensure nothing disconnects. And 100G switches mean you're ready for whatever bandwidth demands come next.”

More information about these new advancements in AV-over-IP technology will be presented by John Henkel and Laurent Masia during a live webinar on Wednesday, Jan. 28, 11 a.m. Pacific / 8 p.m. CET.

Register here.

Experience NETGEAR AV at ISE 2026

• Demos: See the new M4350 switches in person and get a personalized demo of offline provisioning in Engage Controller 2.4.
• Education: Join Laurent Masia's on-demand sessions on AV-over-IP network design.
• Partners: See more than 200 booths at ISE from our total of over 520 broadcast and AV manufacturer partners. Look for the “Powered by NETGEAR AV” signs.
• Video Podcast: Tell your success story using NETGEAR switches. Stop by during show hours and let us record your story.
• Products and People: Get a first-hand look at our other products – M4250 and other M4350 switches, WiFi 7 access points, and the Pro Router. Meet with the Pro AV Design Services team, who will be available for technical questions.

Visit NETGEAR at ISE booth 2U240, Feb. 3-6, in Barcelona.

About NETGEAR, Inc.

Founded in 1996 and headquartered in the USA, NETGEAR® (NASDAQ: NTGR) is a global leader in innovative networking technologies for businesses, homes, and service providers. NETGEAR delivers a wide range of award-winning, intelligent solutions designed to unleash the full potential of connectivity and power extraordinary experiences. For businesses, NETGEAR offers reliable, easy-to-use, high-performance networking solutions, including switches, routers, access points, software, and AV over IP technologies, tailored to meet the diverse needs of small and medium enterprises. NETGEAR’s consumer products deliver advanced connectivity, powerful performance, and enhanced security features right out of the box, designed to help keep families safe online, whether at home or on the go. More information is available from the NETGEAR Press Room or by calling (408) 907-8000. Connect with NETGEAR: Facebook, Instagram and the NETGEAR blog at NETGEAR.com.

©2026 NETGEAR, Inc. NETGEAR and the NETGEAR logo are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its affiliates in the United States and/or other countries. Other brand and product names are for identification purposes only and may be trademarks or registered trademarks of their respective holder(s). The information contained herein is subject to change without notice. NETGEAR shall not be liable for technical or editorial errors or omissions contained herein. All rights reserved.

View source version on businesswire.com: https://www.businesswire.com/news/home/20260127516549/en/

Media Contact:

Miek Hubert

miek.hubert@netgear.com

Source: NETGEAR, Inc.