Onyx Gold Intersects 91 Meters of 1.8 g/t Gold, including 17 Meters of 5.3 g/t Gold in First Step-Out at Argus North Discovery, Munro-Croesus Project
Onyx Gold Corp. (OTCQX: ONXGF) has announced significant drill results from its Argus North Zone at the Munro-Croesus Project in Ontario. The company reported impressive intersections including 91.0 meters grading 1.8 g/t gold, with high-grade sections of 17.0 meters at 5.3 g/t gold in drill hole MC25-168.
The results demonstrate continuity of the new gold zone over 100 vertical meters, with the mineralization remaining open in all directions. The company has completed 5,580 meters of a planned 10,000-meter spring drill program, with only four holes reported to date. The Argus North Zone is located 75 km east of Timmins, showing potential for significant expansion.
Onyx Gold Corp. (OTCQX: ONXGF) ha annunciato risultati di perforazione significativi dalla sua Argus North Zone nel progetto Munro-Croesus in Ontario. La società ha riportato intersezioni impressionanti, tra cui 91,0 metri con una gradazione di 1,8 g/t oro, con sezioni ad alta concentrazione di 17,0 metri a 5,3 g/t oro nel foro di sondaggio MC25-168.
I risultati dimostrano la continuità della nuova zona aurifera per oltre 100 metri verticali, con la mineralizzazione che rimane aperta in tutte le direzioni. La società ha completato 5.580 metri di un programma di perforazione primaverile pianificato di 10.000 metri, con solo quattro fori riportati finora. La Argus North Zone si trova a 75 km a est di Timmins, mostrando un potenziale significativo di espansione.
Onyx Gold Corp. (OTCQX: ONXGF) ha anunciado resultados de perforación significativos en su zona Argus North del proyecto Munro-Croesus en Ontario. La compañía reportó intersecciones impresionantes, incluyendo 91,0 metros con una ley de 1,8 g/t de oro, con secciones de alta ley de 17,0 metros a 5,3 g/t de oro en el taladro MC25-168.
Los resultados demuestran la continuidad de la nueva zona aurífera a lo largo de más de 100 metros verticales, con la mineralización abierta en todas las direcciones. La compañía ha completado 5.580 metros de un programa de perforación primaveral planificado de 10.000 metros, con solo cuatro taladros reportados hasta la fecha. La zona Argus North está ubicada a 75 km al este de Timmins, mostrando un potencial significativo de expansión.
Onyx Gold Corp. (OTCQX: ONXGF)는 온타리오에 위치한 Munro-Croesus 프로젝트의 Argus North Zone에서 중요한 시추 결과를 발표했습니다. 회사는 MC25-168 시추공에서 91.0미터 구간에 1.8 g/t 금 함량을 포함하여, 17.0미터 구간에 5.3 g/t 금 함량이라는 고품위 구간을 보고했습니다.
이 결과는 새로운 금층이 수직으로 100미터 이상 연속됨을 보여주며, 광물화는 모든 방향으로 아직 확장 중입니다. 회사는 계획된 10,000미터 봄철 시추 프로그램 중 5,580미터를 완료했으며, 지금까지 네 개의 시추공 결과만 발표했습니다. Argus North Zone은 Timmins에서 동쪽으로 75km 떨어진 곳에 위치해 있어 상당한 확장 가능성을 보이고 있습니다.
Onyx Gold Corp. (OTCQX: ONXGF) a annoncé des résultats de forage significatifs dans sa zone Argus North du projet Munro-Croesus en Ontario. La société a rapporté des intersections impressionnantes, notamment 91,0 mètres à 1,8 g/t d'or, avec des sections à haute teneur de 17,0 mètres à 5,3 g/t d'or dans le trou de forage MC25-168.
Les résultats démontrent la continuité de cette nouvelle zone aurifère sur plus de 100 mètres verticaux, la minéralisation restant ouverte dans toutes les directions. La société a complété 5 580 mètres d'un programme de forage printanier prévu de 10 000 mètres, avec seulement quatre trous rapportés à ce jour. La zone Argus North est située à 75 km à l'est de Timmins, montrant un potentiel d'expansion significatif.
Onyx Gold Corp. (OTCQX: ONXGF) hat bedeutende Bohrergebnisse aus der Argus North Zone des Munro-Croesus-Projekts in Ontario bekannt gegeben. Das Unternehmen meldete beeindruckende Abschnitte, darunter 91,0 Meter mit 1,8 g/t Gold, mit hochgradigen Abschnitten von 17,0 Metern bei 5,3 g/t Gold im Bohrloch MC25-168.
Die Ergebnisse zeigen die Kontinuität der neuen Goldzone über 100 vertikale Meter, wobei die Mineralisierung in alle Richtungen offen bleibt. Das Unternehmen hat 5.580 Meter eines geplanten 10.000-Meter-Bohrprogramms im Frühjahr abgeschlossen, wobei bisher nur vier Bohrlöcher gemeldet wurden. Die Argus North Zone liegt 75 km östlich von Timmins und zeigt Potenzial für eine bedeutende Erweiterung.
- Strong gold mineralization with 91.0m at 1.8 g/t Au including high-grade sections
- Excellent continuity demonstrated over 100 vertical meters
- Zone remains open for expansion in all directions
- Three of four holes hit high-grade mineralization with grade thickness >150 gram-meters
- Program is fully funded with 5,580m of 10,000m completed
- Only 4 holes reported out of 17 drilled holes so far
- One drill hole (MC24-163-EXT) showed no significant assays in extension portion
Continuity of New Argus North Zone now demonstrated over 100 Vertical Meters
Vancouver, British Columbia--(Newsfile Corp. - June 26, 2025) - Onyx Gold Corp. (TSXV: ONYX) (OTCQX: ONXGF) ("Onyx" or the "Company") is pleased to announce the first drill results of from the Company's 10,000-meter spring drill program (the "Program') at the Argus North Zone ("Argus North"), a newly identified gold zone located on its
Results are reported for two new step-out holes and the extension of two existing holes (Tables 1 and 2 and Figures 1 and 2). These holes followed up on discovery hole MC24-163, which defined a broad, continuous zone of strong gold mineralization, grading 3.4 grams per tonne gold ("g/t Au") over 69.6 meters ("m") (see Company news release dated April 10, 2025).
Highlights
- 91.0 m grading 1.8 g/t Au including 32.0 m grading 4.0 g/t Au and 17.0 m grading 5.3 g/t Au in drill hole MC25-168, a 50 m up-dip step-out from discovery hole MC24-163
- 59.7 m grading 2.5 g/t Au including 18.7 m grading 5.2 g/t Au in drill hole MC25-171, a 30 m up-dip step-out from hole MC25-168
- Three of four holes drilled so far at the Argus Zone have hit high-grade mineralization with a "grade thickness" of greater than 150 gram-meters - a strong indicator of potential
- Excellent continuity has been established between drill holes over 100 vertical meters, and the Argus North Zone remains open to expansion in all directions
- Wide sub-intervals (17 m to 34.5 m) of greater than 5 g/t Au have been intersected in multiple holes, all demonstrating remarkably consistent strong gold values throughout the reported sub-intervals (Table 2)
- 5,580 m have been drilled to date in 17 holes at the Argus North Zone as part of the fully funded, 10,000 m Phase 1 program (only four holes reported to date). Ongoing step-out drilling along strike will continue on 50-m spaced sections. Additional assay results will be reported on an ongoing basis once received and validated through its QA/QC protocols and interpreted for context.
"This is an outstanding start to our initial follow-up drilling at Argus North, where we're quickly demonstrating the continuity of broad zones of high-grade gold mineralization," said Brock Colterjohn, President & CEO. "Every hole is adding valuable insight into the scale and geometry of the system, with mineralization now confirmed along strike and up-dip from the discovery hole. With only half of our fully funded Phase 1 program complete and the zone still open in all directions, we're just beginning to tap into the potential at Argus. We're excited about what's ahead and look forward to sharing more results as drilling advances."
Discussion of 2025 Argus North Results
The Argus North Zone is located on the western half of the Munro-Croesus project, 150 m north of the regional Pipestone Fault, a major structural corridor known to host significant gold deposits. Hole MC24-163, the discovery drill hole at Argus North reported earlier this year, returned 69.6 m grading 3.4 g/t Au, including 34.5 m grading 5.4 g/t Au, including 9.5 m grading 13.9 g/t Au. The Argus North Zone is situated 100 m north of the east-west trending main Argus Zone, which is a separate 750 m x 200 m near-surface bulk tonnage target (e.g. 1.0 g/t Au over 63.3 m and 0.5 g/t Au over 136 m).
Mineralization at Argus North is hosted within a strongly brecciated structural zone with 3
The four drill holes reported today in this news release are all located on the same north-south cross-section as drill hole MC24-163 (see Figure 1 and Figure 2) with 20 m to 50 m step-outs up- and down-dip. The drilling to date has returned very encouraging results with holes MC25-168, MC25-171 and MC23-140-EXT all reporting wide intervals of gold mineralization as reported below and in Table 1:
- 91.0 m grading 1.8 g/t Au, in hole MC25-168 (50 m up-dip from MC24-163), including
- 32.0 m grading 4.0 g/t Au, and including
- 17.0 m grading 5.3 g/t Au
- 59.7 m grading 2.5 g/t Au, in hole MC25-171 (30 m up-dip from MC25-168), including
- 18.7 m grading 5.2 g/t Au, and including
- 2.1 m grading 9.6 g/t Au
- 43.8 m grading 0.9 g/t Au, in hole MC23-140-EXT (20 m down-dip from MC24-163), including
- 2.4 m grading 4.1 g/t Au, and including
- 2.2 m grading 5.5 g/t Au
Hole MC25-163-EXT, the 195 m re-entry and extension to hole MC25-163, fully defined the width of the Argus North mineralizing system and no additional zones of gold mineralization were intersected beyond those already reported in hole MC25-163.
Next Steps
The Company has completed 17 drill holes totalling 5,580 meters to date as part of its fully funded ~10,000-meter Phase 1 drill program at the Argus Zone. Ongoing plans will continue to see step-out drilling along strike on 50-m to 100-m spaced cross-sections designed to extend the zone up-dip to surface and down-dip to depth.
At a larger scale, historical and recent trenching and sampling by the Company in 2024 have demonstrated that the same key prospective mafic variolitic volcanic units extend to the west and east immediately north of the Pipestone Fault, suggesting multi-kilometer scale potential along a trend that is completely untested by any drilling to date.
Plate 1. Example of Argus North Mineralization Style with Strong Albite-Silica Alteration and Disseminated Pyrite in Mafic Breccia (Hole MC25-168)
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9800/256892_64d7f84f64958aaa_001full.jpg
Plate 2. Example of Argus North Mineralization Style with Intense Silica-Albite Alteration and Pyrite Stringers in Variolitic Basalt Flow (Hole MC25-140-EXT)
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9800/256892_64d7f84f64958aaa_002full.jpg
Figure 1 - Cross-Section Highlighting Drill Holes Reported in this Release - Looking East
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9800/256892_64d7f84f64958aaa_003full.jpg
Figure 2 - Plan Map Highlighting Argus North Zone Drill Holes Reported in this Release
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9800/256892_64d7f84f64958aaa_004full.jpg
Figure 3 - Location of the Munro-Croesus Gold Project, Ontario
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/9800/256892_64d7f84f64958aaa_005full.jpg
Table 1 - Significant Assay Results from 2025 Drilling Completed at the Argus North Zone
| Target | From | To | Length | Au |
| Drill Hole | (m) | (m) | (m) | (g/t) |
| Argus North | ||||
| MC25-168 | 148.0 | 239.0 | 91.0 | 1.8 |
| Including | 151.0 | 183.0 | 32.0 | 4.0 |
| Including | 166.0 | 183.0 | 17.0 | 5.3 |
| And Including | 194.0 | 195.0 | 1.0 | 2.6 |
| And Including | 199.5 | 205.0 | 5.5 | 3.3 |
| Including | 203.2 | 205.0 | 1.8 | 6.0 |
| And | 253.0 | 254.0 | 1.0 | 2.0 |
| MC25-171 | 137.3 | 197.0 | 59.7 | 2.5 |
| Including | 143.9 | 185.3 | 41.4 | 3.5 |
| Including | 145.3 | 164.0 | 18.7 | 5.2 |
| And Including | 161.9 | 164.0 | 2.1 | 9.6 |
| And | 270.3 | 277.6 | 7.3 | 0.9 |
| Including | 270.3 | 272.0 | 1.7 | 1.2 |
| Including | 276.4 | 277.6 | 1.2 | 2.1 |
| MC24-163-EXT | No Significant Assays in extension portion | |||
| MC23-140-EXT | 289.8 | 333.6 | 43.8 | 0.9 |
| Including | 290.6 | 302.0 | 11.4 | 1.3 |
| Including | 290.6 | 293.0 | 2.4 | 4.1 |
| Including | 290.6 | 291.0 | 0.4 | 12.8 |
| And Including | 313.9 | 316.1 | 2.2 | 5.5 |
| And Including | 321.7 | 322.3 | 0.6 | 2.9 |
| And Including | 330.8 | 333.6 | 2.8 | 2.8 |
| Including | 330.8 | 331.5 | 0.7 | 9.6 |
*Intersections are reported as drilled width; true width is estimated to be 70
Table 2 - Individual Assay Values from >5 g/t Subintervals in MC25-168 and MC25-171
| Drill Hole | From | To | Length | Au |
| (m) | (m) | (m) | (g/t) | |
| MC25-168 | 166.0 | 167.0 | 1.0 | 8.4 |
| MC25-168 | 167.0 | 168.0 | 1.0 | 2.5 |
| MC25-168 | 168.0 | 169.0 | 1.0 | 5.3 |
| MC25-168 | 169.0 | 170.0 | 1.0 | 7.2 |
| MC25-168 | 170.0 | 171.0 | 1.0 | 7.5 |
| MC25-168 | 171.0 | 172.0 | 1.0 | 7.7 |
| MC25-168 | 172.0 | 173.0 | 1.0 | 4.4 |
| MC25-168 | 173.0 | 174.0 | 1.0 | 6.9 |
| MC25-168 | 174.0 | 175.0 | 1.0 | 6.8 |
| MC25-168 | 175.0 | 175.8 | 0.8 | 3.3 |
| MC25-168 | 175.8 | 176.3 | 0.5 | 1.6 |
| MC25-168 | 176.3 | 177.0 | 0.7 | 7.7 |
| MC25-168 | 177.0 | 178.0 | 1.0 | 4.3 |
| MC25-168 | 178.0 | 179.0 | 1.0 | 5.6 |
| MC25-168 | 179.0 | 180.0 | 1.0 | 2.3 |
| MC25-168 | 180.0 | 180.7 | 0.7 | 1.3 |
| MC25-168 | 180.7 | 181.4 | 0.7 | 1.6 |
| MC25-168 | 181.4 | 182.2 | 0.8 | 5.1 |
| MC25-168 | 182.2 | 183.0 | 0.8 | 7.3 |
| MC25-171 | 145.3 | 146.1 | 0.8 | 7.5 |
| MC25-171 | 146.1 | 147.2 | 1.1 | 4.9 |
| MC25-171 | 147.2 | 148.1 | 0.9 | 5.2 |
| MC25-171 | 148.1 | 149.1 | 1.0 | 0.3 |
| MC25-171 | 149.1 | 150.0 | 0.9 | 3.8 |
| MC25-171 | 150.0 | 150.9 | 0.9 | 11.6 |
| MC25-171 | 150.9 | 151.6 | 0.7 | 9.0 |
| MC25-171 | 151.6 | 152.4 | 0.8 | 0.0 |
| MC25-171 | 152.4 | 153.0 | 0.6 | 1.0 |
| MC25-171 | 153.0 | 153.5 | 0.5 | 0.0 |
| MC25-171 | 153.5 | 153.9 | 0.4 | 0.1 |
| MC25-171 | 153.9 | 154.7 | 0.8 | 13.3 |
| MC25-171 | 154.7 | 155.4 | 0.7 | 10.9 |
| MC25-171 | 155.4 | 156.3 | 0.9 | 1.1 |
| MC25-171 | 156.3 | 157.2 | 0.9 | 8.0 |
| MC25-171 | 157.2 | 157.9 | 0.7 | 4.1 |
| MC25-171 | 157.9 | 158.5 | 0.6 | 3.7 |
| MC25-171 | 158.5 | 159.2 | 0.7 | 0.9 |
| MC25-171 | 159.2 | 160.0 | 0.8 | 2.9 |
| MC25-171 | 160.0 | 161.0 | 1.0 | 2.5 |
| MC25-171 | 161.0 | 161.4 | 0.4 | 3.5 |
| MC25-171 | 161.4 | 161.9 | 0.5 | 3.5 |
| MC25-171 | 161.9 | 162.3 | 0.4 | 8.0 |
| MC25-171 | 162.3 | 163.0 | 0.7 | 6.8 |
| MC25-171 | 163.0 | 164.0 | 1.0 | 12.2 |
The Munro-Croesus Project
The Munro-Croesus Project is located along Highway 101 in the heart of the Abitibi greenstone belt, Canada's premier gold mining jurisdiction (Figure 3). This large,
The Project covers 109 km2 of highly prospective geology within the influence of major gold-bearing structural breaks. Bulk-tonnage gold deposits located in the immediate region include the Fenn-Gib gold project being developed by Mayfair Gold Corp. that contains an Indicated Resource of 4.31 Moz at 0.74 g/t Au and an Inferred Resource of 141 koz at 0.49 g/t Au, and the Tower Gold Project being developed by STLLR Gold Inc. that contains an open pit Indicated Resource of 4.46 Moz at 0.92 g/t Au and an Inferred Resource of 8.29 Moz at 1.09 g/t Au1.
About Onyx Gold
Onyx Gold is an exploration company focused on well-established Canadian mining jurisdictions, with assets in Timmins, Ontario, and Yukon Territory. The Company's extensive portfolio of quality gold projects in the greater Timmins gold camp includes the Munro-Croesus Gold property, renowned for its high-grade mineralization, plus two additional earlier-stage large exploration properties, Golden Mile and Timmins South. The Golden Mile 140 km2 property is located 9 km northeast of Newmont's multi-million-ounce Hoyle Pond deposit in Timmins. The Timmins South 187 km2 property is located to the south and southeast of Timmins and surrounds the Shaw dome structure.
Onyx Gold also controls four properties in the Selwyn Basin area of Yukon Territory, which is currently gaining significance due to recent discoveries in the area. Onyx Gold's experienced board and senior management team are committed to creating shareholder value through the discovery process, careful allocation of capital, and environmentally/socially responsible mineral exploration.
On Behalf of Onyx Gold Corp.
"Brock Colterjohn"
President & CEO
For further information, please visit the Onyx Gold Corp. website at www.onyxgold.com or contact:
Brock Colterjohn, President & CEO
or
Nicole Hoeller, NIKLI Communications - nicole@onyxgold.com
Phone: 1-604-283-3341
Email: information@onyxgold.com
Website: www.onyxgold.com
LinkedIn: https://www.linkedin.com/company/onyx-gold-corp
Twitter: https://twitter.com/OnyxGoldCorp
- Fenn-Gib Gold Project and Tower Gold Project mineral resources compiled from public sources and are provided for general information purposes. Readers are cautioned that the Company has no interest in or right to acquire any interest in adjacent properties and they are not indicative of mineral deposits on the Company's properties or any potential exploration thereof.
Additional Notes:
Starting azimuth, dip and final length (Azimuth/-Dip/Length) for the four drill holes reported today are noted as follows: MC24-163-EXT (000/45/309 to 504), MC23-140-EXT (000/45/283 to 474), MC25-168 (000/57/285) and MC25-171 (000/57/321).
Samples of drill core were cut by a diamond blade rock saw, with half of the cut core placed in individual sealed polyurethane bags and half placed back in the original core box for permanent storage. Sample lengths typically vary from a minimum 0.2-meter interval to a maximum 1.5-meter interval, with an average 0.5 to 1.0-meter sample length. Drill core samples were delivered by truck in sealed woven plastic bags to ALS Geochemistry laboratory facility in Timmins, Ontario for sample preparation with final analysis at ALS Geochemistry Analytical Lab facility in North Vancouver, BC. ALS Geochemistry operate meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015.
Gold is determined by fire-assay fusion of a 50-gram sub-sample with atomic absorption spectroscopy (AAS). Samples that return values >10 ppm gold from fire assay and AAS are determined by using fire assay and a gravimetric finish. Various metals including silver, gold, copper, lead and zinc are analyzed by inductively coupled plasma (ICP) atomic emission spectroscopy, following multi-acid digestion. The elements copper, lead and zinc are determined by ore grade assay for samples that return values >10,000 ppm by ICP analysis. Silver is determined by ore-grade assay for samples that return >100 ppm. All ALS Geochemistry sites operate under a single Global Geochemistry Quality Manual that complies with ISO/IEC 17025:2017. ALS Geochemistry follows the quality management and operational guidelines set out in the international standards ISO/IEC 17025 - "General Requirement for the Competence of Testing and Calibration Laboratories" and ISO 9001 - "Quality Management Systems".
The Company maintains a robust QA/QC program that includes the collection and analysis of duplicate samples and the insertion of blanks and standards (certified reference material).
Ian Cunningham-Dunlop, P.Eng., Executive Vice President for Onyx Gold Corp. and a qualified person ("QP") as defined by Canadian National Instrument 43-101, has reviewed and approved the technical information contained in this release.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Cautionary and Forward-Looking Statements
Forward-looking statements include predictions, projections, and forecasts and are often, but not always, identified by the use of words such as "seek", "anticipate", "believe", "plan", "estimate", "forecast", "expect", "potential", "project", "target", "schedule", "budget" and "intend" and statements that an event or result "may", "will", "should", "could" or "might" occur or be achieved and other similar expressions and includes the negatives thereof. All statements other than statements of historical fact included in this release, including, without limitation, statements regarding the potential significance of results from the new Argus North discovery are forward-looking statements that involve various risks and uncertainties. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Forward-looking statements are based on a number of material factors and assumptions. Important factors that could cause actual results to differ materially from Company's expectations include actual exploration results, changes in project parameters as plans continue to be refined, results of future resource estimates, future metal prices, availability of capital, and financing on acceptable terms, general economic, market or business conditions, uninsured risks, regulatory changes, defects in title, availability of personnel, materials, and equipment on a timely basis, accidents or equipment breakdowns, delays in receiving government approvals, unanticipated environmental impacts on operations and costs to remedy same, and other exploration or other risks detailed herein and from time to time in the filings made by the Company with securities regulators. Although management of the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated, or intended. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. Readers are cautioned that reliance on such information may not be appropriate for other purposes. The Company does not undertake to update any forward-looking statement, forward-looking information or financial outlook that are incorporated by reference herein, except in accordance with applicable securities laws. We seek safe harbor.
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/256892
FAQ
What were the key gold intersections in Onyx Gold's (ONXGF) latest drill results?
How much of Onyx Gold's (ONXGF) 2025 drill program has been completed at Argus North?
Where is Onyx Gold's (ONXGF) Munro-Croesus Project located?
What is the current status of the Argus North Zone mineralization?
What are the next steps for Onyx Gold's (ONXGF) drilling program?
