Atha Energy Confirms Multiple High-Grade Discoveries Along the Mineralized Rib Corridor at Angilak Project - Assays from Rib East, West, And South Discoveries - All Holes Intersecting Uranium Mineralization, Grades Up To 5.55% U3O8

Rhea-AI Summary

ATHA Energy (OTCQB:SASKF) reported assay results from twelve 2025 drill holes along a 12 km Mineralized RIB Corridor (MRC) at the Angilak project in Nunavut.

Key highlights: a 100% success rate for holes intersecting uranium mineralization across RIB East, West and South; high‑grade assays up to 5.55% U3O8 over 0.5 m; RIB East defined by eight holes over a 750 m strike (open in all directions); RIB West by three holes over 2.2 km (open); RIB South defined by one hole. The MRC hosts Athabasca‑style basement, sandstone and unconformity mineralization and remains open where MMT survey coverage is lacking.

Positive

• 100% of 12 recent MRC drillholes intersected uranium mineralization
• High‑grade assay of 5.55% U3O8 over 0.5 m (RIBE‑DD‑003)
• MRC spans a 12 km structural corridor with multiple discoveries
• RIB East: 8 holes over 750 m strike, remains open in all directions

Negative

• All intercepts reported as core width; true thickness not yet determined
• RIB South currently defined by one drillhole, limiting immediate continuity

HIGHLIGHTS

• Assays confirm uranium mineralization across the Mineralized RIB Corridor ("MRC") at RIB South, East and West Discoveries, where results from twelve drillholes intersected uranium mineralization (Figures 2 & 3). These results are in addition to the previously announced RIB North Discovery, where the maiden drillhole, RIBN-DD-001, returned assays with 34.7 m of total composite uranium mineralization¹, including 13.6 m grading 0.53% U₃O₈, 1.1 m grading 4.81% U₃O₈, and grades up to 8.16% U₃O₈ over 0.5 m (See November 20^th, 2025, RIB North Assay Release);

RIB East Discovery

• Located on the 4.5 km long Eastern Limb of the MRC, ~1.4 km south of the significant RIB North Discovery (Figures 2 & 3);

• Currently defined by eight diamond drillholes over a 750 m strike length that remains open in all directions, with drilling highlighted by:

  • RIBE-DD-003 assays returned total composite uranium mineralization¹ of 8.6 m encompassing four zones from 101.4 m to 374.1 m (Figure 4), including a high-grade intersection² from 276.2 m to 277.3 m with 2.69% U₃O₈ over 1.1 m, including 5.55% U₃O₈ over 0.5 m;

  • RIBE-DD-007 assays returned total composite uranium mineralization¹ of 8.7 m encompassing six zones from 174.0 m to 215.3 m (Figure 5), including a higher-grade intersection from 207.2 m to 211.3 m with 0.236% U₃O₈ over 4.1 m, including 1.15% U₃O₈ over 0.5 m;

RIB West Discovery

• Located on the 4.0 km long Western Limb of the MRC, ~1.8 km southwest of the significant RIB North Discovery (Figures 2 & 3);

• Currently defined by three diamond drillholes over a 2.2 km strike length that remains open in all directions, with drilling highlighted by:

  • RIBW-DD-001 assays returned total composite uranium mineralization¹ of 1.7 m from 393.5 m to 395.2 m (Figure 6) with an average grade of 0.78% U₃O₈, including a high-grade intersection² with 1.36% U₃O₈ over 0.6 m;

  • RIBW-DD-003 assays returned total composite uranium mineralization¹ of 2.0 m from 234.2 m to 236.2 m (Figure 7) with an average grade of 0.291% U₃O₈, including a high-grade intersection² of 1.07% U₃O₈ over 0.5 m;

RIB South Discovery

• Located on the 4.5 km long Eastern Limb of the MRC, ~2.25 km south of the RIB East Discovery (Figures 2 & 3);

• Currently defined by one diamond drillhole, with prospective strike length open and untested in all directions along the MRC, with drilling highlighted by:

  • RIBS-DD-001 assays returned total composite uranium mineralization¹ of 2.0 m encompassing two zones from 158.5 m to 252.1 m (Figure 8), including 1.5 m from 250.6 m to 252.1 m with an average grade of 0.11% U₃O₈;

Mineralized RIB Corridor

• Mineralized RIB Corridor - 12 km corridor containing stacked graphitic shear zones, identified using 3D EM Inversion modeling. During the 2025 Angilak Exploration Program these EM anomalies were drill tested, resulting in a 100% success rate of intersecting uranium mineralization associated with graphitic shear zones, and the discovery of four new mineralized areas: RIB East, West, North and South, in addition to the historic RIB Discovery³ (Figures 2 & 3);

• Uranium mineralization discovered along the MRC consists of Athabasca styles of mineralization including basement, sandstone, and unconformity hosted mineralization;

• The MRC remains open within all discovery areas and is currently constrained only by a lack of additional MMT survey data south of the Historic RIB Discovery. Additional MMT surveys paired with 3D EM Inversion modeling is planned for 2026, designed to unlock and define the true scale and significance of the MRC and the entirety of the Angikuni Basin;

• Additional drill core samples from the KU Discovery, Mushroom Lake, and the Lac 50 Deposit area have been submitted to the Saskatchewan Research Council (SRC) Geoanalytical Laboratory for analysis. The Company anticipates disclosing all remaining assay results in the coming weeks.

Troy Boisjoli, CEO commented: "Since acquiring the Angilak Uranium Project in 2024 ATHA has completed two successful drill campaigns comprising 46 holes across the Lac 50 Deposit and RIB-Nine Iron trends - 45 of those holes have intersected uranium mineralization. The 2024 Angilak Exploration Program focused on the Lac 50 Deposit Trend, testing the envelop of mineralization with large step outs, culminating in release of an Exploration Target for the Lac 50 Deposit area - which remains completely open and unconstrained.

During the 2025 Program, our goal was to start to unlock the regional potential of Angilak. Testing new targets which had been derisked through our systematic exploration approach, utilizing all the tools at our disposal to drill test in the most cost-effective means possible. The assay results from the Mineralized RIB Corridor, hitting uranium mineralization on 100% of the holes drilled along the 12-km MRC speaks for itself. The success we've had at RIB demonstrates to us that the scale of the MRC is something truly special, and may represent one of the most significant emerging uranium regions in Canada."

Cliff Revering, VP Exploration added: "The Mineralized RIB Corridor continues to deliver compelling results, supported by the latest confirmation assays from the 2025 exploration program. Uranium mineralization encountered to date, spanning a 12 km structural corridor and anchored by the RIB North Discovery, demonstrates both scale and high-grade potential. Combined with the positive geological and geochemical signatures emerging from our 2025 work, the data increasingly points to a large mineralizing system.

Since acquiring the Angilak Project in 2024, ATHA's disciplined exploration strategy has consistently advanced discovery within the Angikuni Basin, leveraging targeted exploration tools that enhance efficiency and reduce risk of discovery. The delineation of the Mineralized RIB Corridor within the larger RIB-Nine Iron regional trend represents a significant new development and highlights just one of several high-upside targets across the basin.

As we look ahead to 2026, ATHA is well-positioned to build on this momentum. Our objective remains clear: to continue unlocking the value of this emerging uranium district and to demonstrate the long-term growth potential of the Angikuni Basin."

VANCOUVER, BC / ACCESS Newswire / December 10, 2025 / ATHA Energy Corp. (TSX.V:SASK)(FRA:X5U)(OTCQB:SASKF) ("ATHA" or the "Company"), is pleased to announce assay results from the remaining twelve holes drilled along the Mineralized RIB Corridor ("MRC"), completed as part of the 2025 Angilak Exploration Program at its 100%-owned Angilak Uranium Project in Nunavut, Canada (Figure 1). Assay results confirm uranium mineralization was intersected in all drillholes along the 12 km MRC, including the RIB East, West, and South Discoveries, in addition to the previously announced RIB North Discovery.

At the RIB East Discovery, a total of eight diamond drillholes were completed across a total strike length of 750 m and the area remains open in all directions. Drilling at RIB East is highlighted by RIBE-DD-003, assays returned total composite uranium mineralization¹ of 8.6 m encompassing four zones from 101.4 m to 374.1 m (Figure 4). This includes a high-grade² intersection from 276.2 m to 277.3 m with results returning an average grade of 2.69% U₃O₈ over 1.1 m, including 5.55% U₃O₈ over 0.5 m. At the RIB West Discovery, a total of three diamond drillholes were completed across a 2.2 km strike length, with the area remains open in all directions. Drilling at RIB West is highlighted by RIBW-DD-001 which returned total composite uranium mineralization¹ of 1.7 m from 393.5 m to 395.2 m (Figure 6) with an average grade of 0.78% U₃O₈, including a high-grade² intersection of 1.36% U₃O₈ over 0.6 m. RIB South is currently defined by one diamond drillhole, located ~ 2.25 km to the south of the RIB East Discovery. RIBS-DD-001 intersected total composite uranium mineralization¹ of 2.0 m encompassing two zones from 158.5 m to 252.1 m (Figure 8), including 1.5 m from 250.6 m to 252.1 m with an average grade of 0.11% U₃O₈.

The Mineralized RIB Corridor is a 12 km long corridor containing stacked graphitic shear zones, identified using 3D EM Inversion modeling. During the 2025 Angilak Exploration Program these EM anomalies were drill tested, resulting in a 100% success rate of intersecting uranium mineralization associated with the graphitic shear zones, and the discovery of four new mineralized areas: RIB East, West, North and South, in addition to the historic RIB Discovery³ (Figures 2 & 3). Uranium mineralization discovered along the MRC consists of Athabasca style mineralization including basement, sandstone, and unconformity hosted. The MRC remains open in all directions within the discovery areas with additional prospective strike length constrained only by a lack of additional MMT survey data south of the Historic RIB Discovery. Additional MMT surveys paired with 3D EM Inversion modeling is planned for 2026, designed to unlock and define the true scale and significance of the MRC and the entirety of the Angikuni Basin.

Detailed lithologic striplogs, including assay results tables, for all twelve holes can viewed in the Supplementary Release on ATHA Energy's website (Striplog Data).

Figure 1: Angilak Project Area - 2025 Exploration Target Area (Black Rectangles), Mineralized RIB Corridor (Red Rectangle), & Mapped Historic Mineralized Showings

Figure 2: 2025 Angilak Exploration Program - EM Inversion Model & Drill Collar Locations from MRC, along the RIB-Nine Iron Trend.

Figure 3: 2025 Angilak Exploration Program - Isometric schematic of the MRC, displaying EM Inversion model and 2025 drilling.

Table 1: 2025 Angilak Exploration Program Drill Collar Information

Hole ID	Trend	Zone	Azimuth (°)	Dip (°)	Easting (mE)	Northing (mN)	Elevation (m)	Final Depth (m)
*KU-DD-001	RIB-Nine Iron	KU Target	30	70	515830	6936190	256.5	599
*J4R-DD-091	Lac 50	J4/Ray	25	57	522295	6938558	218	650
*RIBE-DD-001	RIB-Nine Iron	RIB East	145	-55	497928	6929449	270	443
*RIBE-DD-002	RIB-Nine Iron	RIB East	145	-55	497766	6929322	271	345
*RIBE-DD-003	RIB-Nine Iron	RIB East	145	-63	497524	6929337	271	398
*RIBE-DD-004	RIB-Nine Iron	RIB East	145	-60	497404	6920180	271	428
*RIBE-DD-005	RIB-Nine Iron	RIB East	155	-65	497530	6929401	270	472
*RIBE-DD-006	RIB-Nine Iron	RIB East	145	-60	497670	6929501	273	491
*RIBE-DD-007	RIB-Nine Iron	RIB East	325	-50	497798	6929101	274	467
*RIBE-DD-008	RIB-Nine Iron	RIB East	325	-55	498284	6929287	264	464
*RIBW-DD-001	RIB-Nine Iron	RIB West	150	-50	495831	6929490	274	503
*RIBW-DD-002	RIB-Nine Iron	RIB West	145	-55	497766	6929322	271	380
*RIBW-DD-003	RIB-Nine Iron	RIB West	325	-55	497645	6930031	275	347
*RIBN-DD-001	RIB-Nine Iron	RIB North	300	-65	499574	6929887	261	623
*RIBS-DD-001	RIB-Nine Iron	RIB South	150	-50	495747	6927640	277.5	377
*KU-DD-002	RIB-Nine Iron	KU Target	30	-70	515525	6936210	251	616
*KU-DD-003	RIB-Nine Iron	KU Target	30	-70	515758	6936059	268.5	56
*KU-DD-003A	RIB-Nine Iron	KU Target	30	-68	515758	6936059	268.5	605
*KU-DD-004	RIB-Nine Iron	KU Target	30	-60	515757	695641	255	602
*KU-DD-005	RIB-Nine Iron	KU Target	210	-70	515980	6935734	256	302
*KU-DD-006	RIB-Nine Iron	KU Target	30	-70	514794	6935805	275	647
*ML-DD-013	Lac 50	ML Target	25	-50	523968	6939404	215	551
*ML-DD-014	Lac 50	ML Target	25	-50	524869	6939109	206	407

^{*Previously released drillholes from 2025 Angilak Exploration Program}

Figure 4: Striplog RIBE-DD-003 showing mineralized interval with composite uranium mineralization¹ with average grades - derived from assay samples.

Figure 5: Striplog RIBE-DD-007 showing mineralized interval with composite uranium mineralization¹ with average grades - derived from assay samples.

Figure 6: Striplog RIBW-DD-001 showing mineralized interval with composite uranium mineralization¹ with average grades - derived from assay samples.

Figure 7: Striplog RIBW-DD-003 showing mineralized interval with composite uranium mineralization¹ with average grades - derived from assay samples.

Figure 8: Striplog RIBS-DD-001 showing mineralized interval with composite uranium mineralization¹ with average grades - derived from assay samples.

Assay Samples

^1.Composite mineralization is calculated using a 0.01% U₃O₈ cutoff with a maximum internal dilution of 1.5 m.

²The Company considers high-grade mineralization to be any interval over 1% U₃O₈.

All drill intercepts are core width and true thickness is yet to be determined.

Core samples are submitted to the Saskatchewan Research Council (SRC) Geoanalytical Laboratories in Saskatoon. The SRC facility is ISO/IEC 17025:2005 accredited by the Standards Council of Canada (scope of accreditation #537). The samples are analyzed for a multi-element suite using partial and total digestion inductively coupled plasma methods, for boron by Na2O2 fusion, and for uranium by fluorimetry.

References for Historic Diamond Drilling Results and Surficial Sampling

³For additional information regarding ATHA's Angilak Project please refer to the Technical Report entitled "Technical Report on the Angilak Property, Nunavut, Canada" with an effective date of October 14, 2025, prepared by Matt Batty, MSc, P. Geo, who is a "qualified person" under NI 43-101, available under ATHA's SEDAR+ profile at www.sedarplus.ca.

Qualified Person

The scientific and technical information contained in this news release have been reviewed and approved by Cliff Revering, P.Eng., Vice President, Exploration of ATHA, who is a "qualified person" as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects.

About ATHA

ATHA is a Canadian mineral company engaged in the acquisition, exploration, and development of uranium assets in the pursuit of a clean energy future. With a strategically balanced portfolio including three 100%-owned post discovery uranium projects (the Angilak Project located in Nunavut, and CMB Discoveries in Labrador, and the newly discovered basement hosted GMZ high-grade uranium discovery located in the Athabasca Basin). In addition, the Company holds the largest cumulative prospective exploration land package (>7 million acres) in two of the world's most prominent basins for uranium discoveries - ATHA is well positioned to drive value. ATHA also holds a 10% carried interest in key Athabasca Basin exploration projects operated by NexGen Energy Ltd. and IsoEnergy Ltd. For more information visit www.athaenergy.com.

On Behalf of the Board of Directors

Troy Boisjoli, CEO, ATHA Energy Corp

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

For more information, please contact:

Troy Boisjoli

Chief Executive Officer

Email: info@athaenergy.com

Website: www.athaenergy.com

Phone: 1-(236)-521-0526

Cautionary Statement Regarding Forward-Looking Information

This press release contains "forward-looking information" within the meaning of applicable Canadian securities legislation. Generally, forward-looking information can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". These forward-looking statements or information may relate to ATHA's proposed exploration program, including statements with respect to the expected benefits of ATHA's proposed exploration program, any results that may be derived from ATHA's proposed exploration program, the timing, scope, nature, breadth and other information related to ATHA's proposed exploration program, any results that may be derived from the diversification of ATHA's portfolio, the prospects of ATHA's projects, including mineral resources estimates and mineralization of each project, the prospects of ATHA's business plans and any expectations with respect to defining mineral resources or mineral reserves on any of ATHA's projects, and any expectation with respect to any permitting, development or other work that may be required to bring any of the projects into development or production.

Forward-looking statements are necessarily based upon a number of assumptions that, while considered reasonable by management at the time, are inherently subject to business, market and economic risks, uncertainties and contingencies that may cause actual results, performance or achievements to be materially different from those expressed or implied by forward-looking statements. Such assumptions include, but are not limited to, assumptions that the anticipated benefits of ATHA's proposed exploration program will be realized, that no additional permit or licenses will be required in connection with ATHA's exploration programs, the ability of ATHA to complete its exploration activities as currently expected and on the current anticipated timelines, including ATHA's proposed exploration program, that ATHA will be able to execute on its current plans, that ATHA's proposed explorations will yield results as expected, and that general business and economic conditions will not change in a material adverse manner. Although ATHA has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking information.

Such statements represent the current view of ATHA with respect to future events and are necessarily based upon a number of assumptions and estimates that, while considered reasonable by ATHA, are inherently subject to significant business, economic, competitive, political and social risks, contingencies and uncertainties. Risks and uncertainties include, but are not limited to the following: inability of ATHA to realize the benefits anticipated from the exploration and drilling targets described herein or elsewhere; in ability of ATHA to complete current exploration plans as presently anticipated or at all; inability for ATHA to economically realize on the benefits, if any, derived from the exploration program; failure to complete business plans as it currently anticipated; overdiversification of ATHA's portfolio; failure to realize on benefits, if any, of a diversified portfolio; unanticipated changes in market price for ATHA shares; changes to ATHA's current and future business and exploration plans and the strategic alternatives available thereto; growth prospects and outlook of the business of ATHA; and the ability to advance the Company projects and its proposed exploration program; risks inherent in mineral exploration including risks related worker safety, weather and other natural occurrences, accidents, availability of personnel and equipment, and other factors; aboriginal title; failure to obtain regulatory and permitting approvals; no known mineral resources/reserves; reliance on key management and other personnel; competition; changes in laws and regulations; uninsurable risks; delays in governmental and other approvals, community relations; stock market conditions generally; demand, supply and pricing for uranium; and general economic and political conditions in Canada, Australia and other jurisdictions where ATHA conducts business. Other factors which could materially affect such forward-looking information are described in the filings of ATHA with the Canadian securities regulators which are available on ATHA's profile on SEDAR+ at www.sedarplus.ca. ATHA does not undertake to update any forward-looking information, except in accordance with applicable securities laws.

SOURCE: ATHA Energy Corp

View the original press release on ACCESS Newswire

FAQ

What assays did ATHA (SASKF) report from the Mineralized RIB Corridor on December 10, 2025?

ATHA reported assays from 12 holes showing uranium mineralization in all holes, including a high‑grade result of 5.55% U3O8 over 0.5 m (RIBE‑DD‑003).

How long is the Mineralized RIB Corridor at ATHA's Angilak project (SASKF)?

The company describes the Mineralized RIB Corridor as approximately 12 km long, containing stacked graphitic shear zones.

What does the 100% drilling success rate mean for ATHA (SASKF)?

It means all 12 tested EM anomalies along the MRC intersected uranium mineralization during the 2025 program, supporting the corridor's regional prospectivity.

Which RIB discovery returned the highest reported grade for ATHA (SASKF)?

RIB East (RIBE‑DD‑003) returned the highest reported grade of 5.55% U3O8 over 0.5 m, within 2.69% U3O8 over 1.1 m.

Are ATHA's reported drill intercepts true thicknesses for SASKF's Angilak results?

No; all drill intercepts are reported as core width and the true thickness is yet to be determined.

What are ATHA's next exploration steps at Angilak (SASKF)?

The company plans additional MMT surveys paired with 3D EM inversion modeling in 2026 and intends to disclose remaining assay results in the coming weeks.