Salazar Reports a High-Grade Tungsten-Silver Intersection at the Pijili Project, Ecuador: 2.00 Metres Grading 1.80% W (2.27% WO3) and 740 g/t Ag
Rhea-AI Summary
Salazar Resources (OTCQB: SRLZF) reported a newly interpreted high‑grade 2.00 m interval in historical drill hole MERC-011 at the 100%-owned Pijilí Project in Ecuador, grading 1.80% W (2.27% WO3), 740 g/t Ag and 0.63% Cu within a broader porphyry Cu-Au±Mo system.
The re-analysis refines a previously reported 18.55 m zone (4.70–23.25 m) that averaged 0.99% Cu, 0.25 g/t Au, 0.03% Mo, 189.8 g/t Ag and 0.23% W, hosted in a hydrothermal breccia related to a shear/fault. Surface rock and soil sampling define a tungsten anomaly of about 600 m x 450 m in the northern Mercy concession. No follow-up drilling has yet been completed to test the continuity of this tungsten-silver enrichment, and no mineral resource has been estimated at Pijilí. The new interpretation comes from historic Adventus data, supported by documented QA/QC procedures and verification by Salazar’s Qualified Person under NI 43‑101.
Positive
- 2.00 m interval at 1.80% W and 740 g/t Ag identified within MERC-011 through reinterpretation of historical assays
- Near-surface 18.55 m sub-interval grading 0.99% Cu, 0.25 g/t Au, 0.03% Mo, 189.8 g/t Ag and 0.23% W
- Large surface tungsten anomaly of approximately 600 m x 450 m outlined in rocks and soils at the Mercy concession
- 100%-owned Pijilí Project covering 1,397 hectares in a porphyry Cu-Au±Mo system with tungsten enrichment
- Historical assays with documented QA/QC from Adventus, verified against original lab certificates by Salazar’s Qualified Person
Negative
- No follow-up drilling yet to test continuity of the high-grade tungsten-silver interval at depth or along strike
- True widths unknown as reported intervals are downhole lengths only for MERC-011 mineralization
- No mineral resource estimate has been completed for the Pijilí Project despite encouraging grades
- Assay data are historical and have not been independently re-assayed by Salazar, limiting direct verification
- Qualified Person was not present during the historical drilling and sampling program, noted as a verification limitation
AI-generated analysis. How Rhea-AI works. Not financial advice.
Re-interpretation of results confirms a newly identified, higher-grade 2-metre interval grading
Vancouver, British Columbia--(Newsfile Corp. - August 26, 2026) - SALAZAR RESOURCES LIMITED (TSXV: SRL) (OTCQB: SRLZF) (FSE: CCG) ("Salazar" or the "Company") is pleased to provide an updated technical review of the tungsten-silver mineralization identified within drill hole MERC-011 at the Mercy concession, part of the Salazar's
Highlights
Surface data (rocks and soils) indicate a significant tungsten anomaly in the northern part of the Mercy concession, measuring 600 m x 450 m.
The mineralized body is interpreted to be a porphyry Cu-Au±Mo system with tungsten enrichment.
Borehole MERC-011 intersected 151.8 meters with grades of
0.25% Cu, 0.08 g/t Au,0.01% Mo, and 3.2 g/t Ag. This included a near-surface sub-interval of 18.6 m with grades of0.99% Cu, 0.25 g/t Au,0.03% Mo, 189.8 g/t Ag, and0.23% W, hosted within a hydrothermal breccia associated with a shear/fault.The tungsten grade increases to
1.8% and 740 g/t Ag over 2 meters (Drill hole MERC-011) in the shear fault.No additional work has been conducted to explore the continuity of the anomaly at the surface or at depth through new drilling aimed at tracing the high tungsten values.
Management Commentary
"Copper, silver and tungsten are all on the United States' 2025 Critical Minerals List, and MERC-011 returned all three over the same two metres. At
Background - Discovery at Mercy Concession and MERC-011
In 2020 and 2021, a drilling program was carried out at the Pijilí Project's Mercy concession, comprising twelve drill holes totalling 7,031 metres. Within this program, drill hole MERC-011 was one of the final holes of the campaign, and it was this hole that intersected the mineralization described here.
Fig 1. Tungsten anomaly from soil and rocks over the Pijilí Project
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4631/311497_08eb3840f4e69aa8_002full.jpg
Fig 2. Drill collar location Map (News Release April 20, 2021)
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4631/311497_08eb3840f4e69aa8_003full.jpg
Fig 3. MERC-011 Drill Core cross-section
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4631/311497_08eb3840f4e69aa8_004full.jpg
Within the broader porphyry intercept, a higher-grade near-surface subinterval from 4.70 to 23.25 meters returned significantly elevated silver and tungsten values not observed in any other drill hole at Mercy. Petrographic and core logging work indicates this mineralization occurs within a breccia associated with a fault or shear zone, and is interpreted as a separate, overprinting mineralizing event superimposed on the main porphyry system.
Table 1. MERC-011 - Higher-Grade Silver-Tungsten Zone (4.70 - 23.25 m)
| Interval | From (m) | To (m) | Width* (m) | Cu (%) | Au (g/t) | Mo (%) | Ag (g/t) | W (%) |
| MERC-011 | 0.70 | 152.51 | 151.81 | 0.25 | 0.08 | 0.01 | 3.2 | - |
| Main interval | 4.70 | 23.25 | 18.55 | 0.99 | 0.25 | 0.03 | 189.8 | 0.23 |
| Including (not previously reported)** | 18.3 | 20.3 | 2.00 | 0.63 | 0.07 | 0.02 | 740.0 | 1.80 |
* Reported widths are downhole widths; true widths are not yet known.
** The assays were completed as part of the original Adventus drilling program and are not newly assayed by Salazar. The news release of April 20, 2021 reported an 18.55 metre interval grading
Tungsten Mineralization Context
Tungsten is a strategic and critical commodity valued for its exceptional hardness, high melting point, strength, and resistance to wear and heat. It is widely used in specialized electronics, aerospace and defense applications, cemented carbide cutting and drilling tools, mining and construction equipment, and high-performance alloys. Tungsten, silver and copper are each included on the United States' 2025 Critical Minerals List. Tungsten grades are conventionally reported as WO3 rather than as elemental W:
Next Steps
Conduct a detailed mapping of the hydrothermal fracture and the fault/shear zone, which contains the highest silver and tungsten grades.
Define drilling targets to follow up on the grades encountered in the MERC-011 drill hole.
Salazar will re-analyse the other
100% -owned projects for critical minerals such as: tungsten, scandium, germanium, antimony, magnesium and vanadium.
Pijilí Project
The Pijilí Project is a 1,397-hectare,
QA/QC Program
The analytical results reported herein are based on historical sampling and assay work completed as part of Adventus Mining Corporation's exploration program and are not the result of new assays conducted by Salazar. During the historical drilling program, technical staff collected and processed drill-core samples, which were securely sealed and shipped to Bureau Veritas Ecuador in Quito for sample preparation, including crushing and milling to produce pulps. The pulps were then split for shipment to Bureau Veritas's facilities in Lima, Peru and Vancouver, Canada for analysis. The historical program implemented a quality assurance/quality control (QA/QC) program that includes chain-of-custody and the insertion of standards, blanks, and duplicates. A QA/QC program was also maintained by Bureau Veritas and included the insertion of blanks, standards and duplicates reanalysis of selected samples. Bureau Veritas's quality system complied with the applicable ISO standards at the time of the historical program. Gold was analyzed by classical fire assay techniques with an Optical Emission Spectroscopy (ICP-OES) finish, while silver and base metals were analyzed using 46-elements, four-acid digestion with ICP-MS. Overlimit protocols were applied for gold, silver, copper, molybdenum and zinc. Salazar has reviewed and re-interpreted historical drill-hole and assay data and has not independently re-assayed the historical samples. The Company's Qualified Person (QP) has verified the assay data disclosed herein against the original laboratory certificates and the drill-hole database; the QP was notpresent during the historical drilling and sampling programme, which is the limitation on that verification.
Qualified Person
Mr. Kieran Downes, Ph.D., P.Geo., the Qualified Person for the Pijilí Project as defined by National Instrument 43-101 - Standards of Disclosure for Mineral Projects, has reviewed and approved the scientific and technical content of this news release. Mr. Downes is independent of the Company within the meaning of section 1.5 of NI 43-101.
About Salazar Resources Limited
Salazar Resources Limited (TSXV: SRL) (OTCQB: SRLZF) (FSE: CCG) is a Canadian junior exploration company focused on the discovery and development of mineral deposits in Ecuador. The Company's strategy combines in-house geological expertise with a disciplined, systematic approach to project generation and advancement. Alongside a
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.
Forward-Looking Statements
This press release contains "forward-looking information" within the meaning of applicable Canadian securities laws, including statements regarding the potential economic significance of tungsten mineralization at the Pijilí Project, planned metallurgical and structural work, and future drill targeting. Forward-looking information is based on the reasonable assumptions, estimates, analyses and opinions of management as of the date such statements are made, and is subject to known and unknown risks, uncertainties and other factors that may cause actual results to differ materially from those expressed or implied. Such risks include, without limitation, the preliminary and conceptual nature of the mineralization interpretation presented herein, the availability of financing and the allocation of the Company's exploration expenditures among its projects, the absence of confirmatory metallurgical test work, uncertainty regarding tungsten pricing and marketability, and the risk that follow-up exploration may not confirm the extent or continuity of the mineralization described. Readers are cautioned not to place undue reliance on forward-looking information. Salazar does not undertake any obligation to update forward-looking information except as required by applicable securities laws.
To view the source version of this press release, please visit https://www.newsfilecorp.com/release/311497