Southern Cross Gold Infill Drilling Lifts Golden Dyke Grades: 2.7 m @ 178.4 g/t and 6.8 m @ 49.8 g/t Gold

Four newly recognized vein sets extend Golden Dyke 30 m to 50 m west toward Christina, beyond the current Exploration Target.

Rhea-AI Summary

Southern Cross Gold Consolidated (SXGCF) reported five infill drill holes at Golden Dyke, including 2.7 m grading 178.4 g/t gold. The results come from its wholly owned Sunday Creek Gold-Antimony Project in Victoria. SDDSC225 returned that interval from 662.3 m; SDDSC218 returned 6.8 m at 49.8 g/t gold from 537.9 m, and SDDSC221 returned 1.0 m at 198.9 g/t gold from 680.0 m.

Four newly recognized vein sets extended Golden Dyke 30 m to 50 m west toward Christina. Eight composite intervals exceeded 100 g/t gold. SDDSC218 also returned 2.2 m at 27.7 g/t gold and 8.9% antimony from 495.9 m. Southern Cross said closer drilling lifted grades and sharpened the high-grade cores. Bounding hole SDDSC236 returned no significant intersections, defining the southern margin. Results remain pending from 72 holes, including three abandoned holes; the 200,000 m drilling program continues through Q1 2027.

Positive

• Minor pointSDDSC225 returned 2.7 m at 178.4 g/t gold from 662.3 m on the GD40 vein set.
• Minor pointSDDSC218 returned 6.8 m at 49.8 g/t gold from 537.9 m, approximately 380 m below surface.
• Minor pointSDDSC221 returned 1.0 m at 198.9 g/t gold from 680.0 m.
• Minor pointFour newly recognized vein sets extended Golden Dyke 30 m to 50 m west toward Christina.
• Minor pointCloser-spaced drilling lifted grades and sharpened high-grade cores, Southern Cross said.

8 minor points

• Minor pointSDDSC218 returned 2.2 m at 27.7 g/t gold and 8.9% antimony from 495.9 m.
• Minor pointSDDSC229 returned 13.2 m at 6.8 g/t gold and 0.4% antimony from 489.0 m.
• Minor pointSDDSC229 returned 8.6 m at 5.2 g/t gold and 1.3% antimony from 523.1 m.
• Minor pointSDDSC225 also returned 3.9 m at 32.9 g/t gold from 793.8 m.
• Minor pointSDDSC218 returned 13.0 m at 4.0 g/t gold and 1.2% antimony from 477.8 m.
• Minor pointSDDSC218 returned 9.7 m at 8.1 g/t gold and 0.6% antimony from 646.1 m.
• Minor pointSDDSC221 confirmed GD80 vein continuity near previously drilled holes SDDSC210 and SDDSC171.
• Minor point. Forward-looking: it has not happened yet and may not happen.Southern Cross's 200,000 m drilling program continues through Q1 2027.

Negative

• Minor pointBounding hole SDDSC236 returned no significant intersections, defining the mineralized system's southern margin.
• Minor pointThe pending-results inventory includes three abandoned holes.

AI-generated analysis. How Rhea-AI works. Not financial advice.

See more from StockTitan in Google Search and AI answers. Adds StockTitan as a preferred source · opens Google

Add on Google Not now

Vancouver, British Columbia and Melbourne, Australia--(Newsfile Corp. - October 7, 2026) - Southern Cross Gold Consolidated Ltd (TSX: SXGC) (ASX: SX2) (OTCQX: SXGCF) (FSE: MV3) ("SXGC", "SX2" or the "Company") announces results from five infill drill holes at the 100%-owned Sunday Creek Gold-Antimony Project in Victoria. Closer spaced drilling at the Golden Dyke Prospect is lifting grades, tightening the high-grade cores and adding vein sets 50 m to the west (Figures 1 to 7).

Four High Level Takeaways:

• Infill drilling at Golden Dyke delivers high-grade composites, not just high-grade samples. 
  
  SDDSC225: 2.7 m @ 178.6 g/t AuEq (178.4 g/t Au, 0.1% Sb) from 662.3 m, the 13th best composite intersection at Sunday Creek to date, on the GD40 vein set with no drilling beneath it
  
  SDDSC218: 6.8 m @ 50.1 g/t AuEq (49.8 g/t Au, 0.1% Sb) from 537.9 m, the broadest high-grade composite in this release, 380 m below surface
  
  SDDSC221: 1.0 m @ 198.9 g/t AuEq (198.9 g/t Au, 0.0% Sb) from 680.0 m, built from adjacent assays of 334.0 g/t Au and 447.0 g/t Au

• Closer spaced drilling is lifting grades and sharpening the high-grade cores, not diluting them. 
  
  Eight composite intersections in this release exceed 100 g/t Au and twelve individual assays exceed 100 g/t Au, spread across four of the five holes. The composites carry the high individual grades rather than depending on them: the 6.8 m @ 50.1 g/t AuEq in SDDSC218 includes 1,290.0 g/t Au over 0.22 m, the highest individual assay in the release, and the 1.0 m @ 198.9 g/t AuEq in SDDSC221 is made up of adjacent assays of 334.0 g/t Au and 447.0 g/t Au. 

• Golden Dyke keeps growing westward towards Christina, even at infill spacing. 
  
  SDDSC218 and SDDSC221 cut four vein sets not previously recognized within the current Exploration Target, pushing Golden Dyke 30 m to 50 m west towards Christina. SDDSC218 alone cut 22 vein sets. The infill holes tie directly to SDDSC171, SDDSC177, SDDSC188 and SDDSC210 on the GD80 vein set at 10 m to 30 m spacings: the continuity the geological model predicts is now drilled.

• Antimony stays high alongside the gold. 
  
  SDDSC218 returned three individual assays exceeding 20% Sb in the upper part of the hole, peaking at 53.5% Sb with 20.8 g/t Au over 0.35 m from 496.30 m, within 2.2 m @ 49.0 g/t AuEq (27.7 g/t Au, 8.9% Sb) from 495.9 m. SDDSC229 returned 0.2 m @ 56.5 g/t AuEq (25.4 g/t Au, 13.0% Sb) from 495.1 m within a broader 13.2 m @ 7.9 g/t AuEq zone. The system is zoned, with antimony richest in the upper part of the tested block and gold dominant at depth.

Michael Hudson, President & CEO, states: "Infill is where a lot of high-grade systems get found out. Golden Dyke is doing the opposite. Tighter spacing has lifted grades, tightened the high-grade cores and added vein sets we had not counted, including four outside the current Exploration Target that push the prospect 50 m further west towards Christina.

"SDDSC225 returned 2.7 m @ 178.4 g/t gold, our 13^th best composite at Sunday Creek, on a vein set with nothing drilled beneath it. SDDSC218 cut 22 vein sets and delivered 6.8 m @ 49.8 g/t gold, and SDDSC229 tied the vein sets together at 10 m to 30 m spacing. Eight composites over 100 g/t gold in a single infill release shows what this system does when you drill it closer. These five holes tested a continuous block roughly 300 m by 500 m, from 280 m to 750 m below surface, with antimony rich at the top and gold dominant at depth."

"Twelve rigs are turning, 72 holes are in the lab and the 200,000 m program runs through to Q1 2027. The infill is confirming the model while the step-outs keep growing it."

For Those Who Like the Details - Highlights:

• SDDSC225 infilled the main Golden Dyke area, cut five vein sets and returned the best composite in this release, 2.7 m @ 178.6 g/t AuEq (178.4 g/t Au, 0.1% Sb) from 662.3 m, the 13th best composite intersection at Sunday Creek to date and the deepest hit on the GD40 vein set, with no drilling beneath it. Four individual assays exceeded 100 g/t Au, peaking at 512.0 g/t Au with 0.30% Sb over 0.85 m. Highlights include:

  • 2.7 m @ 178.6 g/t AuEq (178.4 g/t Au, 0.1% Sb) from 662.3 m (No drilling beneath this intercept)

  • 3.9 m @ 32.9 g/t AuEq (32.9 g/t Au, 0.0% Sb) from 793.8 m, including:

    • 0.4 m @ 106.0 g/t AuEq (106.0 g/t Au, 0.0% Sb) from 793.8 m

    • 0.3 m @ 335.0 g/t AuEq (335.0 g/t Au, 0.0% Sb) from 795.8 m

• SDDSC218 infilled the central Golden Dyke Prospect and intersected 22 vein sets, one of them new to the Exploration Target. It returned the broadest high-grade composite in this release, 6.8 m @ 50.1 g/t AuEq (49.8 g/t Au, 0.1% Sb) from 537.9 m, about 380 m below surface, which carries the highest individual assay in the release at 1,290.0 g/t Au with 0.67% Sb over 0.22 m. The hole also returned three individual assays above 20% Sb, peaking at 53.50% Sb with 20.8 g/t Au over 0.35 m. Highlights include:

  • 13.0 m @ 6.8 g/t AuEq (4.0 g/t Au, 1.2% Sb) from 477.8 m, including:

    • 3.2 m @ 12.5 g/t AuEq (5.2 g/t Au, 3.0% Sb) from 485.3 m

    • 0.1 m @ 159.9 g/t AuEq (124.0 g/t Au, 15.0% Sb) from 489.9 m

  • 2.2 m @ 49.0 g/t AuEq (27.7 g/t Au, 8.9% Sb) from 495.9 m, including:

    • 1.5 m @ 72.7 g/t AuEq (40.9 g/t Au, 13.3% Sb) from 495.9 m

  • 6.8 m @ 50.1 g/t AuEq (49.8 g/t Au, 0.1% Sb) from 537.9 m, including:

    • 0.7 m @ 64.7 g/t AuEq (64.2 g/t Au, 0.2% Sb) from 539.0 m

    • 0.2 m @ 1,291.6 g/t AuEq (1,290.0 g/t Au, 0.7% Sb) from 541.2 m

  • 9.7 m @ 9.5 g/t AuEq (8.1 g/t Au, 0.6% Sb) from 646.1 m, including:

    • 0.3 m @ 220.0 g/t AuEq (219.0 g/t Au, 0.4% Sb) from 654.0 m

  • 0.6 m @ 37.8 g/t AuEq (25.8 g/t Au, 5.0% Sb) from 735.2 m

• SDDSC221 infilled the main Golden Dyke area and pushed its western side, cutting eight vein sets, three of them new to the Exploration Target and extending Golden Dyke west towards Christina. It confirmed the GD80 vein set 13 m along strike of SDDSC210 and 18 m along strike of SDDSC171, and returned 1.0 m @ 198.9 g/t AuEq from adjacent assays of 334.0 g/t Au and 447.0 g/t Au. Highlights include:

  • 5.1 m @ 2.6 g/t AuEq (1.6 g/t Au, 0.5% Sb) from 457.0 m

  • 2.4 m @ 8.2 g/t AuEq (3.0 g/t Au, 2.2% Sb) from 610.4 m, including:

    • 1.8 m @ 10.4 g/t AuEq (3.8 g/t Au, 2.7% Sb) from 610.4 m

  • 1.0 m @ 198.9 g/t AuEq (198.9 g/t Au, 0.0% Sb) from 680.0 m

• SDDSC229, a shallower infill hole from the SDDSC218 collar, cut eight vein sets and returned two broad zones, 13.2 m @ 7.9 g/t AuEq and 8.6 m @ 8.2 g/t AuEq. It ties the Golden Dyke vein sets together at infill spacing: 10 m along strike of SDDSC177, 30 m up-dip of SDDSC188 and 32 m down-dip of SDDSC218 (this release). Two individual assays exceeded 100 g/t Au, peaking at 261.0 g/t Au with 0.68% Sb over 0.12 m. Highlights include:

  • 13.2 m @ 7.9 g/t AuEq (6.8 g/t Au, 0.4% Sb) from 489.0 m, including:

    • 2.2 m @ 15.9 g/t AuEq (14.2 g/t Au, 0.7% Sb) from 491.7 m

    • 0.2 m @ 56.5 g/t AuEq (25.4 g/t Au, 13.0% Sb) from 495.1 m

    • 0.1 m @ 262.6 g/t AuEq (261.0 g/t Au, 0.7% Sb) from 498.7 m

  • 8.6 m @ 8.2 g/t AuEq (5.2 g/t Au, 1.3% Sb) from 523.1 m, including:

    • 1.4 m @ 16.7 g/t AuEq (10.4 g/t Au, 2.6% Sb) from 523.1 m

    • 1.3 m @ 25.1 g/t AuEq (17.3 g/t Au, 3.3% Sb) from 526.7 m

Project Totals to Date

• 288 drill holes for 140.8 km reported from Sunday Creek since late 2020

• 106 composite intersections exceeding 100 g/t Au by applying a 1 m (down hole length) @ 5 g/t AuEq lower cut

• 115 composite intersections exceeding 10% Sb by applying a 1 m (down hole length) @ 5 g/t AuEq lower cut

• Results pending from 72 holes, including eleven holes actively being drilled and three abandoned holes, with eleven drill rigs currently operational

• 200,000 m drill program continuing through to Q1 2027

Drill Hole Discussion

This release reports five infill holes within the Golden Dyke prospect at Sunday Creek, all drilled east to west to cut the steeply dipping vein sets at high angles (Figures 1 and 3). These holes tested a continuous block roughly 300 m by 500 m, from 280 m to 750 m below surface.

Closer spacing has done two things. It has lifted grades and sharpened the high-grade cores within known vein sets, and it has found vein sets the model had not yet counted. SDDSC218 and SDDSC221 intersected four vein sets outside the current Exploration Target, extending Golden Dyke 30 m to 50 m west towards Christina (Figure 3). Visible gold was logged 36 times across SDDSC218, SDDSC221, SDDSC225 and SDDSC229. Twelve individual assays exceeded 100 g/t Au and three exceeded 20% Sb across the five holes (Tables 2 and 3).

Infill drilling has reduced hole spacing within the block from approximately 50 m to approximately 30 m along strike by 15 m to 20 m laterally (Figures 4 and 5). The system is zoned: antimony is richest in the upper part of the block, where grades above 1% Sb persist across a broad central zone and the highest values exceed 5% Sb, while gold is dominant at depth. Silver of up to approximately 30 g/t Ag accompanies the higher grade gold results within sulphosalts that become more prominent with depth.

SDDSC218

SDDSC218 was drilled as an infill hole through the central Golden Dyke Prospect and intersected 22 vein sets, including one not previously recognized within the current Exploration Target (refer to release dated 4 August 2026). The hole returned the broadest high-grade composite of this release, 6.8 m @ 50.1 g/t AuEq (49.8 g/t Au, 0.1% Sb) from 537.9 m, approximately 380 m below surface, which includes the highest individual gold assay in this release of:

• 1,290.0 g/t Au & 0.67% Sb over 0.22 m from 541.18 m

Additional individual assays >100 g/t Au include:

• 124.0 g/t Au & 15.00% Sb over 0.12 m from 489.92 m

• 186.0 g/t Au & 0.33% Sb over 0.21 m from 538.96 m

• 219.0 g/t Au & 0.42% Sb over 0.33 m from 653.97 m

Antimony grades are also strong in the upper part of the hole, where three individual assays exceeding 20% Sb were returned between 472 m and 497 m down hole, including:

• 25.60% Sb & 7.3 g/t Au over 0.10 m from 472.25 m

• 23.80% Sb & 32.6 g/t Au over 0.20 m from 487.00 m

• 53.50% Sb & 20.8 g/t Au over 0.35 m from 496.30 m

Selected composite highlights include:

• 3.4 m @ 7.6 g/t AuEq (5.6 g/t Au, 0.8% Sb) from 389.9 m, including:

  • 0.8 m @ 24.6 g/t AuEq (24.5 g/t Au, 0.0% Sb) from 392.6 m

• 13.0 m @ 6.8 g/t AuEq (4.0 g/t Au, 1.2% Sb) from 477.8 m, including:

  • 3.2 m @ 12.5 g/t AuEq (5.2 g/t Au, 3.0% Sb) from 485.3 m

  • 0.1 m @ 159.9 g/t AuEq (124.0 g/t Au, 15.0% Sb) from 489.9 m

• 2.2 m @ 49.0 g/t AuEq (27.7 g/t Au, 8.9% Sb) from 495.9 m, including:

  • 1.5 m @ 72.7 g/t AuEq (40.9 g/t Au, 13.3% Sb) from 495.9 m

• 6.0 m @ 3.0 g/t AuEq (1.5 g/t Au, 0.6% Sb) from 503.3 m

• 6.8 m @ 50.1 g/t AuEq (49.8 g/t Au, 0.1% Sb) from 537.9 m, including:

  • 0.7 m @ 64.7 g/t AuEq (64.2 g/t Au, 0.2% Sb) from 539.0 m

  • 0.2 m @ 1,291.6 g/t AuEq (1,290.0 g/t Au, 0.7% Sb) from 541.2 m

• 9.7 m @ 9.5 g/t AuEq (8.1 g/t Au, 0.6% Sb) from 646.1 m, including:

  • 0.3 m @ 220.0 g/t AuEq (219.0 g/t Au, 0.4% Sb) from 654.0 m

• 0.6 m @ 37.8 g/t AuEq (25.8 g/t Au, 5.0% Sb) from 735.2 m

SDDSC221

SDDSC221 infilled the main Golden Dyke area and pushed its western side. The hole cut eight vein sets, three of them not previously recognized within the current Exploration Target, extending Golden Dyke west towards Christina.

SDDSC221 also confirms the continuity of the GD80 vein set (Figure 4), intersecting it 13 m along strike of SDDSC210, which returned 7.4 m @ 1.8 g/t AuEq (0.8 g/t Au, 0.4% Sb) from 486.8 m (refer to release dated 22 April 2026), and 18 m along strike of SDDSC171, which returned 2.8 m @ 13.7 g/t AuEq (9.8 g/t Au, 1.6% Sb) from 457.1 m (refer to release dated 26 August 2025).

SDDSC221 intersected two (2) individual assays exceeding 100 g/t Au:

• 334.0 g/t Au & 0.01% Sb over 0.11 m from 680.49 m

• 447.0 g/t Au & 0.01% Sb over 0.36 m from 680.60 m

Selected composite highlights include:

• 5.1 m @ 2.6 g/t AuEq (1.6 g/t Au, 0.5% Sb) from 457.0 m

• 6.0 m @ 1.6 g/t AuEq (0.8 g/t Au, 0.3% Sb) from 585.9 m

• 2.4 m @ 8.2 g/t AuEq (3.0 g/t Au, 2.2% Sb) from 610.4 m, including:

  • 1.8 m @ 10.4 g/t AuEq (3.8 g/t Au, 2.7% Sb) from 610.4 m

• 2.2 m @ 4.7 g/t AuEq (3.2 g/t Au, 0.6% Sb) from 655.5 m

• 1.0 m @ 198.9 g/t AuEq (198.9 g/t Au, 0.0% Sb) from 680.0 m

SDDSC225

SDDSC225 infilled the main Golden Dyke area and cut five vein sets. It returned the best composite in this release, 2.7 m @ 178.6 g/t AuEq (178.4 g/t Au, 0.1% Sb) from 662.3 m, the 13th best composite intersection at Sunday Creek to date. It is the deepest intercept on the GD40 vein set and nothing has yet been drilled beneath it.

SDDSC225 intersected four (4) individual assays exceeding 100 g/t Au:

• 512.0 g/t Au & 0.30% Sb over 0.85 m from 662.27 m

• 160.0 g/t Au & 0.02% Sb over 0.21 m from 664.72 m

• 106.0 g/t Au & 0.01% Sb over 0.36 m from 793.78 m

• 335.0 g/t Au & 0.01% Sb over 0.25 m from 795.78 m

Selected composite highlights include:

• 2.7 m @ 178.6 g/t AuEq (178.4 g/t Au, 0.1% Sb) from 662.3 m

• 3.9 m @ 32.9 g/t AuEq (32.9 g/t Au, 0.0% Sb) from 793.8 m, including:

  • 0.4 m @ 106.0 g/t AuEq (106.0 g/t Au, 0.0% Sb) from 793.8 m

  • 0.3 m @ 335.0 g/t AuEq (335.0 g/t Au, 0.0% Sb) from 795.8 m

SDDSC229

SDDSC229, a shallower infill hole from the SDDSC218 collar, cut eight vein sets and returned two broad mineralized zones, 13.2 m @ 7.9 g/t AuEq (6.8 g/t Au, 0.4% Sb) from 489.0 m and 8.6 m @ 8.2 g/t AuEq (5.2 g/t Au, 1.3% Sb) from 523.1 m.

SDDSC229 demonstrates the continuity of the Golden Dyke vein sets at infill spacing (Figure 4). The hole intersected the GD80 vein set 10 m along strike of SDDSC177, which returned 8.3 m @ 8.1 g/t AuEq (5.8 g/t Au, 1.0% Sb) from 504.5 m (refer to release dated 23 October 2025), ~19 m up-dip of SDDSC188, which returned 9.4 m @ 5.2 g/t AuEq (3.6 g/t Au, 0.7% Sb) from 496.4 m (refer to release dated 6 January 2026) and 32 m down-dip of SDDSC218, which returned 6.0 m @ 3.0 g/t AuEq (1.5 g/t Au, 0.6% Sb) from 503.3 m (this release), with SDDSC229 returning 8.6 m @ 8.2 g/t AuEq (5.2 g/t Au, 1.3% Sb) from 523.1 m.

The GD82 vein set provides a further example of high-grade core continuity, SDDSC229 returned 13.2 m @ 7.9 g/t AuEq (6.8 g/t Au, 0.4% Sb) from 489.0 m, 40 m up-dip of this result SDDSC218 (this release) returned 13.0 m @ 6.8 g/t AuEq (4.0 g/t Au, 1.2% Sb) from 477.8 m, highlighting both broad zones of mineralisation with high-grade cores that had not previously been recognised with the broader spaced drilling.

SDDSC229 intersected two (2) individual assays exceeding 100 g/t Au:

• 189.0 g/t Au & 0.06% Sb over 0.13 m from 492.54 m

• 261.0 g/t Au & 0.68% Sb over 0.12 m from 498.65 m

Selected composite highlights include:

• 2.8 m @ 4.3 g/t AuEq (2.7 g/t Au, 0.6% Sb) from 481.0 m

• 13.2 m @ 7.9 g/t AuEq (6.8 g/t Au, 0.4% Sb) from 489.0 m, including:

  • 2.2 m @ 15.9 g/t AuEq (14.2 g/t Au, 0.7% Sb) from 491.7 m

  • 0.2 m @ 56.5 g/t AuEq (25.4 g/t Au, 13.0% Sb) from 495.1 m

  • 0.1 m @ 262.6 g/t AuEq (261.0 g/t Au, 0.7% Sb) from 498.7 m

• 8.6 m @ 8.2 g/t AuEq (5.2 g/t Au, 1.3% Sb) from 523.1 m, including:

  • 1.4 m @ 16.7 g/t AuEq (10.4 g/t Au, 2.6% Sb) from 523.1 m

  • 1.3 m @ 25.1 g/t AuEq (17.3 g/t Au, 3.3% Sb) from 526.7 m

SDDSC236

SDDSC236 was a bounding hole on the southern side of the Golden Dyke prospective terrain and returned no significant intersections. It defines the southern margin of the mineralized system and gives structural control for follow-up targeting.

Pending Results and Update

Twelve drill rigs are operating at Sunday Creek. Results are pending from 72 holes, 49 at Sunday Creek and 24 regional, including eleven holes currently drilling and three abandoned holes (Figure 2). The Company's 200,000 m drill program continues through to Q1 2027.

About Sunday Creek

The Sunday Creek epizonal-style gold project is located 60 km north of Melbourne (Figure 7) within 16,900 hectares ("Ha") of granted exploration tenements. SXGC is also the freehold landholder of 2,296 Ha that forms the key portion in and around the main drilled area at the Sunday Creek Project.

Gold and antimony form in a relay of vein sets that cut across a steeply dipping zone of intensely altered rocks (the "host"). These vein sets are like a "Golden Ladder" structure where the main host extends between the side rails deep into the earth, with multiple cross-cutting vein sets that host the gold forming the rungs. At Apollo, Golden Dyke and Rising Sun these individual 'rungs' have been defined over a 600 m depth extent from surface to over 1,200 m below surface, are 2.5 m to 3.5 m wide (median widths), locally up to 10 m, and 20 m to 100 m in strike.

Cumulatively, 288 drill holes for 140,848.84 m have been reported from Sunday Creek since late 2020. This amount includes six holes for 1,029 m that have been drilled for geotechnical purposes and 23 holes for 3,104.12 m that were abandoned due to deviation or hole conditions. Fourteen drill holes for 2,382.74 m have been reported regionally outside of the main Sunday Creek drill area. A total of 64 historic drill holes for 5,599 m were completed from the late 1960s to 2008. The project now contains a total of one-hundred-and-six (106) composite intersections exceeding 100 g/t Au and eighty-five (85) composite intersections between 50 g/t and 100 g/t Au, and one-hundred-and-fifteen (115) composite intersections exceeding 10% Sb by applying a 1 m (down hole length) @ 5 g/t AuEq lower cut.

Southern Cross Gold's systematic drill program is strategically targeting these significant vein formations, which are currently drill defined over 1,550 m strike of the host dyke/sediment ("rails of the ladder") from Christina to Apollo prospects, of which approximately 650 m has been more intensively drill tested (Golden Dyke to Apollo). At least 126 'rungs' have been defined to date, defined by high-grade intercepts (20 g/t Au to >7,330 g/t Au) along with lower grade edges. Ongoing step-out drilling is aiming to uncover the potential extent of this mineralized system (Figure 3).

Geologically, the project is located within the Melbourne Structural Zone in the Lachlan Fold Belt. The regional host to the Sunday Creek mineralization is an interbedded turbidite sequence of siltstones and minor sandstones metamorphosed to sub-greenschist facies and folded into a set of open north-west trending folds.

Further Information

Further discussion and analysis of the Sunday Creek project is available through the interactive Vrify 3D animations, presentations and videos all available on the SXGC website.  These data, along with an interview on these results with President & CEO/Managing Director Michael Hudson can be viewed at www.southerncrossgold.com.

No upper gold grade cut is applied in the averaging and intervals are reported as drill thickness. However, during future Mineral Resource studies, the requirement for assay top cutting will be assessed. The Company notes that due to rounding of assay results to one significant figure, minor variations in calculated composite grades may occur.

Figures 1 to 7 show project location, plan and longitudinal views of drill results reported here and Tables 1 to 3 provide collar and assay data. The true thickness of the mineralized intervals reported individually as estimated true widths ("ETW"), otherwise they are interpreted to be approximately 60% to 85% of the sampled thickness for other reported holes. Lower grades were cut at 1.0 g/t AuEq lower cutoff over a maximum width of 2 m with higher grades cut at 5.0 g/t AuEq lower cutoff over a maximum of 1 m width.

Critical Metal Epizonal Gold-Antimony Deposits

Sunday Creek (Figure 6) is an epizonal gold-antimony deposit formed in the late Devonian (like Fosterville, Costerfield and Redcastle), 60 million years later than mesozonal gold systems formed in Victoria (for example Ballarat and Bendigo). Epizonal deposits are a form of orogenic gold deposit classified according to their depth of formation: epizonal (<6 km), mesozonal (6 km to 12 km) and hypozonal (>12 km).

Epizonal deposits in Victoria often have associated high levels of the critical metal, antimony, and Sunday Creek is no exception. China claims a 56 per cent share of global mined supplies of antimony, according to a 2023 European Union study. Antimony features highly on the critical minerals lists of many countries including Australia, the United States of America, Canada, Japan and the European Union. Australia ranks seventh for antimony production despite all production coming from a single mine at Costerfield in Victoria, located nearby to all SXGC projects. Antimony alloys with lead and tin which results in improved properties for solders, munitions, bearings and batteries. Antimony is a prominent additive for halogen-containing flame retardants. Adequate supplies of antimony are critical to the world's energy transition, and to the high-tech industry, especially the semiconductor and defence sectors where it is a critical additive to primers in munitions.

Antimony represents approximately 15% to 17% in situ recoverable value of Sunday Creek at an AuEq of 2.39 ratio.

About Southern Cross Gold Consolidated Limited (TSX: SXGC) (ASX: SX2) (OTCQX: SXGCF) (FSE: MV3)

Southern Cross Gold Consolidated Ltd. (TSX: SXGC) (ASX: SX2) (OTCQX: SXGCF), is defining a leading gold-antimony project at the Sunday Creek Gold-Antimony Project, located 60 km north of Melbourne. Sunday Creek is a significant gold and antimony drill discovery in a Tier 1 location, with high-grade drill results including 106 composite intersections exceeding 100 g/t Au from 146.4 km of drilling (including historic drilling). The mineralization follows a "Golden Ladder" structure over 12 km of interpreted strike length, with structures drill tested from surface to 1,200 m depth.

Sunday Creek's strategic value is enhanced by its dual-metal profile. The Company has a critical mineral that the Western world needs. This has gained increased significance following China's export restrictions on antimony, a critical metal for defence and semiconductor applications. Southern Cross' inclusion in the US Defense Industrial Base Consortium (DIBC) and Australia's AUKUS-related legislative changes position it as a potential key Western antimony supplier.

Technical fundamentals further strengthen the investment case, with preliminary metallurgical work showing non-refractory mineralization suitable for conventional processing and gold recoveries of 93% to 98% through gravity and flotation.

With a strong cash position, 2,296 Ha of strategic freehold land ownership, and a large 200 km drill program planned through Q1 2027, SXGC is well-positioned to advance this globally significant gold-antimony discovery in a tier-one jurisdiction, delivering milestone by milestone.

- Ends -

For ASX Compliance: This announcement has been approved for release by the Board of Southern Cross Gold Consolidated Ltd.

For further information, please contact:

Mariana Bermudez – Corporate Secretary

mb@southerncrossgold.com or +1 604 685 9316

Executive Office

1305 – 1090 West Georgia Street Vancouver, BC, V6E 3V7, Canada

Nicholas Mead – VP Investor Relations

info@southerncrossgold.com.au or +61 415 153 122

Justin Mouchacca, Assistant Company Secretary,

jm@southerncrossgold.com.au or +61 3 8630 3321

Subsidiary Office

Level 21, 459 Collins Street, Melbourne, VIC, 3000, Australia

NI 43-101 Technical Background and Qualified Person

Kenneth Bush, Head of Exploration for SXGC, a Member of Australian Institute of Geoscientists and a Registered Professional Geologist in the fields of Mining and Exploration (#10315), is the Qualified Person as defined by the NI 43-101. They have prepared, reviewed, verified and approved the technical contents of this release.

Analytical samples are transported to the Bendigo facility of On Site Laboratory Services ("On Site") which operates under both an ISO 9001 and NATA quality systems. Samples were prepared and analyzed for gold using the fire assay technique (PE01S method; 25 gram charge), followed by measuring the gold in solution with flame AAS equipment. Samples for multi-element analysis (BM011 and over-range methods as required) use aqua regia digestion and ICP-OES analysis. The QA/QC program of Southern Cross Gold consists of the systematic insertion of certified standards of known gold content, blanks within interpreted mineralized rock and quarter core duplicates. In addition, On Site inserts blanks and standards into the analytical process.

SXGC considers that both gold and antimony that are included in the gold equivalent calculation ("AuEq") have reasonable potential to be recovered and sold at Sunday Creek, given current geochemical understanding, historic production statistics and geologically analogous mining operations. Historically, ore from Sunday Creek was treated onsite or shipped to the Costerfield mine, located 54 km to the northwest of the project, for processing during WW1. The Costerfield mine corridor, now owned by Alkane Resources (previously Mandalay Resources) contains two million ounces of equivalent gold (Mandalay Resources Q3 2021 Results), and in 2020 was the sixth highest-grade global underground mine and a top 5 global producer of antimony.

SXGC considers that it is appropriate to adopt the same gold equivalent variables as Mandalay Resources Ltd in its 2024 End of Year Mineral Reserves and Resources Press Release, dated February 20, 2025. The gold equivalence formula used by Mandalay Resources was calculated using Costerfield's 2024 production costs, using a gold price of US$2,500 per ounce, an antimony price of US$19,000 per tonne and 2024 total year metal recoveries of 91% for gold and 92% for antimony, and is as follows:

AuEq = Au (g/t) + 2.39 × Sb (%)

Based on the latest Costerfield calculation and given the similar geological styles and historic toll treatment of Sunday Creek mineralization at Costerfield, SXGC considers that a AuEq = Au (g/t) + 2.39 × Sb (%) is appropriate to use for the initial exploration targeting of gold-antimony mineralization at Sunday Creek.

JORC Competent Person Statement

Information in this announcement that relates to new exploration results contained in this report is based on information compiled by Mr Kenneth Bush a Member of Australian Institute of Geoscientists and a Registered Professional Geologist in the fields of Mining and Exploration (#10315). Mr Bush has sufficient experience relevant to the style of mineralization and type of deposit under consideration, and to the activities undertaken, to qualify as a Competent Person as defined in the 2012 Edition of the Joint Ore Reserves Committee (JORC) Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Bush is Head of Exploration of Southern Cross Gold Consolidated Limited and consents to the inclusion in the report of the matters based on their information in the form and context in which it appears.

Certain information in this announcement that relates to prior exploration results is extracted from the Independent Geologist's Report dated 11 December 2024 which was issued with the consent of the Competent Person, Mr Steven Tambanis. The report is included in the Company's prospectus dated 11 December 2024 and is available at www.asx.com.au under code "SX2". The Company confirms that it is not aware of any new information or data that materially affects the information related to exploration results included in the original market announcement. The Company confirms that the form and context of the Competent Persons' findings in relation to the report have not been materially modified from the original market announcement.

Certain information in this announcement also relates to prior drill hole exploration results, extracted from the following announcements, which are available to view on www.southerncrossgold.com:

4 October, 2022 SDDSC046, 20 October, 2022 SDDSC049, 5 September, 2023 SDDSC077B, 12 October, 2023 SDDLV003 & 4, 23 October, 2023 SDDSC082, 9 November, 2023 SDDSC091, 14 December, 2023 SDDSC092, 5 March, 2024 SDDSC107, 30 May, 2024 SDDSC117, 13 June, 2024 SDDSC118, 5 September, 2024 SDDSC130, 26 September 2024 SDDSC124, 28 October, 2024 SDDSC137W2, 28 November, 2024 SDDSC141, 9 December, 2024 SDDSC145, 18 December, 2024 SDDSC129 & 144, 28 May, 2025 SDDSC161, 16 June, 2025 SDDSC162, 26 August, 2025 SDDSC171, 8 September, 2025 SDDSC170A, 23 October, 2025 SDDSC177, 17 December, 2025 SDDSC181, 6 January, 2026 SDDSC188, 9 April, 2026 SDDSC194W1, 22 April, 2026 SDDSC210, 4 August, 2026 Exploration Target

The Company confirms that it is not aware of any new information or data that materially affects the information included in the original document/announcement and the Company confirms that the form and context in which the Competent Person's findings are presented have not been materially modified from the original market announcement.

Forward-Looking Statement

This news release contains forward-looking statements. Forward-looking statements involve known and unknown risks, uncertainties and assumptions and accordingly, actual results and future events could differ materially from those expressed or implied in such statements. You are hence cautioned not to place undue reliance on forward-looking statements. All statements other than statements of present or historical fact are forward-looking statements. Forward-looking statements include words or expressions such as "proposed", "will", "subject to", "near future", "in the event", "would", "expect", "prepared to" and other similar words or expressions. Factors that could cause future results or events to differ materially from current expectations expressed or implied by the forward-looking statements include general business, economic, competitive, political, social uncertainties; the state of capital markets, unforeseen events, developments, or factors causing any of the expectations, assumptions, and other factors ultimately being inaccurate or irrelevant; and other risks described in the Company's documents filed with Canadian or Australian (under code SX2) securities regulatory authorities. You can find further information with respect to these and other risks in filings made by the Company with the securities regulatory authorities in Canada or Australia (under code SX2), as applicable, and available for the Company in Canada at www.sedarplus.ca or in Australia at www.asx.com.au (under code SX2). Documents are also available at www.southerncrossgold.com The Company disclaims any obligation to update or revise these forward-looking statements, except as required by applicable law.

Figure 1: Sunday Creek plan view showing selected results from holes SDDSC218, SDDSC221, SDDSC225, SDDSC229 and SDDSC236 reported here (dark blue highlighted box, black trace), with selected prior reported drill holes. 

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11541/317813_d58808ba4446593a_004full.jpg

Figure 2: Sunday Creek plan view showing selected drill hole traces from holes SDDSC218, SDDSC221, SDDSC225, SDDSC229 and SDDSC236 reported here (black trace), with prior reported drill holes (grey trace) and currently drilling and assays pending hole traces (dark blue).

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11541/317813_d58808ba4446593a_005full.jpg

Figure 3: Sunday Creek longitudinal section across A-B in the plane of the dyke breccia/altered sediment host looking towards the NW (striking 56 degrees) indicating mineralized vein sets. Showing holes SDDSC218, SDDSC221, SDDSC225, SDDSC229 and SDDSC236 reported here (dark blue highlighted box, black trace), with selected intersections and prior reported drill holes. The vertical extents of the vein sets are limited by proximity to drill hole pierce points. 

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11541/317813_d58808ba4446593a_006full.jpg

Figure 4: Sunday Creek longitudinal section C - D of Golden Dyke Vein Set 80.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11541/317813_d58808ba4446593a_007full.jpg

Figure 5: Sunday Creek longitudinal section E - F of Golden Dyke Vein Set 82 showing high-grade core continuity 

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11541/317813_d58808ba4446593a_008full.jpg

Figure 6: Sunday Creek regional plan view showing soil sampling, structural framework, regional historic epizonal gold mining areas and broad regional areas. The main regional drill areas are at Tonstal, Consols and Leviathan located 4,000 m to 7,500 m along strike from the main drill area at Golden Dyke- Apollo. Map in GDA94/ MGA Zone 55.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11541/317813_d58808ba4446593a_009full.jpg

Figure 7: Location of the Sunday Creek project, along with the 100% owned Redcastle Gold-Antimony Project

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11541/317813_d58808ba4446593a_010full.jpg

Table 1: Drill collar summary table for recent drill holes in progress.

This Release
Hole ID	Depth (m)	Prospect	East  GDA94 Z55	North  GDA94 Z55	Elevation (m)	Dip	Azimuth  GDA94 Z55
SDDSC218	796.99	Golden Dyke	330813.4	5867847.6	301.1	-47.9	265.0
SDDSC221	926.54	Golden Dyke	330754.1	5867733.0	307.0	-50.6	285.3
SDDSC225	992.82	Golden Dyke	330754.5	5867733.0	306.9	-52.9	284.8
SDDSC229	541.80	Golden Dyke	330813.9	5867847.7	301.2	-48.4	267.2
SDDSC236	650.10	Golden Dyke	330813.7	5867847.3	301.1	-49.5	263.8

 

Currently being processed and analyzed
Hole ID	Depth (m)	Prospect	East  GDA94 Z55	North  GDA94 Z55	Elevation (m)	Dip	Azimuth  GDA94 Z55
SDDSC215	476.39	Regional	331603.6	5867183.7	304.9	-38.2	15.4
SDDSC226	826.10	Rising Sun	331276.9	5867121.1	289.1	-56.4	336.5
SDDSC226A	In Progress plan 2200 m	Rising Sun	331278.1	5867112.6	289.2	-56.8	330.4
SDDSC226W1	603.90	Rising Sun	331276.9	5867121.1	289.1	-56.4	336.5
SDDSC237	359.00	Golden Dyke	330700.4	5867880.1	299.7	-43.2	245.7
SDDSC237W1	510.47	Golden Dyke	330700.4	5867880.1	299.7	-43.2	299.7
SDDSC238	810.80	Christina	329778.6	5867552.7	286.5	-32.0	69.2
SDDSC239	915.63	Golden Dyke	330753.1	5867731.5	306.9	-31.0	270.2
SDDSC240	1171.50	Rising Sun	330354.1	5867861.2	277.2	-58.7	73.9
SDDSC240W1	594.00	Rising Sun	330354.1	5867861.2	277.2	-58.7	73.9
SDDSC241	418.60	Golden Dyke	330700.9	5867879.7	299.8	-39.1	243.5
SDDSC242A	370.67	Golden Dyke	330813.4	5867846.9	301.1	-45.8	267.4
SDDSC242AW1	601.73	Golden Dyke	330813.4	5867846.9	301.1	-45.8	267.4
SDDSC243	1038.00	Apollo	331615.8	5867951.1	347.0	-59.5	269.0
SDDSC244	1098.00	Golden Dyke	330973.3	5867847.7	296.7	-49.5	275.8
SDDSC245	548.80	Regional	331533.7	5867845.3	341.2	-40.7	156.1
SDDSC246	760.20	Golden Dyke	330753.7	5867731.8	306.7	-39.5	274.6
SDDSC247	193.60	Golden Dyke	330772.2	5867889.6	295.7	-32.3	248.5
SDDSC248	572.50	Apollo	331291.3	5867825.7	316.4	-40.9	269.8
SDDSC249	191.09	Golden Dyke	330772.7	5867889.6	295.7	-36.7	245.9
SDDSC250	199.81	Rising Sun	330772.4	5867889.9	295.7	-36.9	252.3
SDDSC251	120.40	Apollo	331532.6	5867847.5	340.9	-31.9	270.4
SDDSC251A	306.70	Apollo	331532.8	5867847.9	340.9	-31.7	273.7
SDDSC252	200.00	Golden Dyke	330772.7	5867889.9	295.7	-40.0	249.9
SDDSC253	349.40	Apollo	331595.8	5867936.9	345.6	-53.8	267.8
SDDSC253W1	1042.70	Apollo	331595.8	5867936.9	345.6	-53.8	267.8
SDDSC254	In Progress plan 890 m	Christina	329777.2	5867552.7	286.5	-52.1	61.9
SDDSC255	551.00	Golden Dyke	330773.0	5867890.0	295.6	-41.4	251.2
SDDSC256	445.37	Golden Dyke	330772.2	5867889.4	295.7	-31.0	245.3
SDDSC257	304.74	Golden Dyke	330813.1	5867847.3	301.1	-43.1	263.8
SDDSC257W1	634.50	Golden Dyke	330813.1	5867847.3	301.1	-43.1	263.8
SDDSC258	1036.67	Golden Dyke	330973.3	5867847.7	296.7	-32.5	265.0
SDDSC259	781.66	Golden Dyke	330754.0	5867731.7	306.7	-43.6	274.0
SDDSC259W1	1201.20	Golden Dyke	330754.0	5867731.7	306.7	-43.6	274.0
SDDSC260	1028.50	Rising Sun	330339.6	5867859.2	276.9	-69.6	64.3
SDDSC261	1021.30	Apollo	331615.0	5867950.8	346.9	-45.5	266.3
SDDSC262	924.20	Apollo	331596.4	5867937.0	345.4	-55.5	266.5
SDDSC263	In Progress plan 1230 m	Apollo	330761.8	5867730.2	307.3	-52.9	66.3
SDDSC264	230.30	Golden Dyke	330813.5	5867847.8	301.3	-50.8	259.6
SDDSC264A	In Progress plan 710 m	Golden Dyke	330813.5	5867847.8	301.3	-53.7	267.1
SDDSC265	760.43	Apollo	331615.5	5867951.0	346.7	-55.6	270.4
SDDSC265W1	436.50	Apollo	331615.0	5867951.0	346.0	-61.3	264.1
SDDSC266	In Progress plan 600 m	Apollo	331525.0	5867844.0	339.9	-50.9	280.6
SDDSC267	In Progress plan 1450 m	Rising Sun	330353.9	5867861.1	277.1	-63.6	76.4
SDDSC269	In Progress plan 1400 m	Rising Sun	330339.6	5867859.2	276.9	-66.0	75.1
SDDSC270	In Progress plan 1100 m	Apollo	331615.5	5867951.7	346.8	-51.3	267.8
SDDSC271	In Progress plan 1200 m	Golden Dyke	330973.3	5867847.7	296.7	-55.0	275.8

 

Regional holes currently being processed and analyzed
Hole ID	Depth (m)	Prospect	East  GDA94 Z55	North  GDA94 Z55	Elevation (m)	Dip	Azimuth  GDA94 Z55
SDDTS009	506.00	Tonstall	336984.3	5870557.1	524.7	-28.3	285.0
SDDTS008	511.37	Tonstall	336992.9	5870558.4	524.0	-35.0	29.0
SDDTS010	535.79	Tonstall	336993.7	5870557.9	524.1	-37.0	44.4
SDDTS011	401.32	Tonstall	336992.1	5870557.3	524.1	-43.0	18.0
SDDCN002	259.88	Consols	336036.0	5870692.7	484.1	-37.0	241.0
SDDLV005A	419.10	Leviathan	334566.1	5870167.8	554.3	-31.0	206.0
SDDLV006	752.80	Leviathan	334569.4	5870170.0	554.4	-47.0	152.0
SDDCN003	323.06	Consols	336041.3	5870692.1	484.4	-36.0	130.0
SDDCN005A	229.30	Consols	336034.9	5870693.5	484.0	-30.0	256.5
SDDCN004	271.30	Consols	336036.5	5870693.7	484.1	-49.0	258.0
SDDLV007	395.10	Leviathan	334570.1	5870169.2	554.4	-29.1	110.2
SDDCN006	179.80	Consols	336038.4	5870692.3	484.3	-77.9	180.0
SDDLV008	302.93	Leviathan	334101.2	5870007.2	544.1	-60.0	99.0
SDDTS012	590.54	Tonstall	336992.0	5870558.0	524.0	-48.5	8.2
SDDCN007	152.40	Consols	336041.4	5870693.0	484.4	-50.0	114.8
SDDTS015	460.00	Leviathan	337693.0	5870860.0	523.0	0.0	0.0
SDDTS014	200.00	Tonstall	337693.0	5870860.0	523.0	-45.0	180.0
SDDLV010	802.40	Leviathan	334495.0	5869985.0	553.0	0.0	0.0
SDDTS013	329.04	Tonstall	337693.0	5870860.0	523.0	-38.0	248.0
SDDLV009	335.03	Leviathan	334089.0	5870005.0	544.0	-33.0	233.0
SDDAM001	In Progress plan 700 m	Aftermath	335952.0	5871577.0	436.0	-35.0	66.0
SDDLV011	In Progress plan 450 m	Leviathan	334805.0	5870245.0	545.0	-69.0	80.0

 

Abandoned drill holes currently being processed and analyzed
Hole ID	Depth (m)	Prospect	East  GDA94 Z55	North  GDA94 Z55	Elevation (m)	Dip	Azimuth  GDA94 Z55
SDDCN005	34.69	Consols	336034.9	5870693.5	484.0	-30.0	256.5
SDDLV005	32.40	Leviathan	334566.1	5870167.8	554.3	-33.4	206.0
SDDSC242	20.65	Golden Dyke	330813.6	5867847.0	301.0	-45.8	267.2

 

Table 2: Table of mineralized drill hole intersections reported from SDDSC218, SDDSC221, SDDSC225, SDDSC229 and SDDSC236 with two cutoff criteria. Lower grades cut at 1.0 g/t AuEq lower cutoff over a maximum of 2 m with higher grades cut at 5.0 g/t AuEq cutoff over a maximum of 1 m. Significant intersections and interval depths are rounded to one decimal place.

Hole number	From (m)	To (m)	Interval (m)	Au g/t	Sb %	AuEq g/t
SDDSC218	389.9	393.3	3.4	5.6	0.8	7.6
Including	389.9	391.0	1.1	0.4	2.5	6.2
Including	392.6	393.3	0.8	24.5	0.0	24.6
SDDSC218	403.0	412.1	9.1	0.7	0.1	1.0
SDDSC218	433.2	437.5	4.3	0.8	0.3	1.6
SDDSC218	440.6	440.7	0.1	19.6	3.9	29.0
SDDSC218	445.4	448.1	2.7	3.6	0.6	4.9
Including	445.4	445.8	0.5	16.9	1.3	20.0
SDDSC218	452.8	453.5	0.7	1.9	0.4	2.9
SDDSC218	460.9	461.3	0.4	15.1	0.1	15.3
Including	460.9	461.2	0.3	19.3	0.0	19.4
SDDSC218	463.6	467.0	3.5	2.5	0.1	2.7
Including	463.6	464.5	0.9	7.9	0.0	8.0
SDDSC218	469.9	472.4	2.5	1.2	1.3	4.2
Including	472.3	472.4	0.1	7.3	25.6	68.5
SDDSC218	477.8	490.8	13.0	4.0	1.2	6.8
Including	477.8	479.0	1.2	8.5	0.5	9.7
Including	485.3	488.6	3.2	5.2	3.0	12.5
Including	489.9	490.0	0.1	124.0	15.0	159.9
SDDSC218	495.9	498.1	2.2	27.7	8.9	49.0
Including	495.9	497.4	1.5	40.9	13.3	72.7
SDDSC218	500.5	501.1	0.6	3.0	0.7	4.5
SDDSC218	503.3	509.3	6.0	1.5	0.6	3.0
Including	507.3	508.3	1.0	1.6	2.2	6.8
SDDSC218	526.1	526.7	0.6	8.3	0.0	8.3
SDDSC218	537.2	537.7	0.6	17.5	0.5	18.7
Including	537.2	537.4	0.3	34.6	1.0	36.9
SDDSC218	537.9	544.7	6.8	49.8	0.1	50.1
Including	539.0	539.7	0.7	64.2	0.2	64.7
Including	541.2	541.4	0.2	1,290.0	0.7	1,291.6
Including	543.4	544.7	1.3	5.8	0.2	6.2
SDDSC218	549.6	552.5	2.9	0.9	0.2	1.4
SDDSC218	555.2	557.4	2.2	1.9	0.1	2.2
SDDSC218	574.7	576.9	2.2	1.6	0.1	1.8
SDDSC218	591.5	593.2	1.7	1.9	0.6	3.3
SDDSC218	598.3	600.2	1.9	0.8	0.2	1.2
SDDSC218	620.9	621.3	0.4	33.0	0.0	33.0
SDDSC218	646.1	655.8	9.7	8.1	0.6	9.5
Including	646.1	647.9	1.8	1.4	1.9	5.9
Including	654.0	654.3	0.3	219.0	0.4	220.0
SDDSC218	659.0	661.1	2.1	3.2	0.1	3.5
Including	660.0	661.1	1.1	6.0	0.1	6.2
SDDSC218	704.4	705.7	1.3	4.5	0.0	4.6
SDDSC218	721.4	723.7	2.2	3.6	0.2	4.1
Including	722.9	723.7	0.7	9.6	0.2	10.0
SDDSC218	735.2	735.8	0.6	25.8	5.0	37.8
SDDSC218	743.0	745.5	2.5	3.9	0.1	4.1
Including	744.3	744.9	0.7	13.1	0.0	13.2
SDDSC218	763.9	767.8	3.9	0.6	0.1	0.9
SDDSC221	457.0	462.1	5.1	1.6	0.5	2.6
Including	460.3	460.9	0.7	4.2	2.7	10.5
SDDSC221	568.0	568.5	0.5	6.6	0.0	6.6
SDDSC221	585.9	592.0	6.0	0.8	0.3	1.6
SDDSC221	610.4	612.8	2.4	3.0	2.2	8.2
Including	610.4	612.2	1.8	3.8	2.7	10.4
SDDSC221	617.7	619.1	1.5	0.8	0.3	1.6
SDDSC221	627.2	627.4	0.2	13.5	0.2	13.9
SDDSC221	629.8	631.9	2.0	1.0	0.1	1.2
SDDSC221	655.5	657.7	2.2	3.2	0.6	4.7
Including	656.9	657.7	0.8	8.8	0.1	9.0
SDDSC221	660.9	661.1	0.2	2.9	3.5	11.3
SDDSC221	680.0	681.0	1.0	198.9	0.0	198.9
SDDSC221	703.4	704.3	0.9	4.5	0.0	4.5
SDDSC221	740.3	742.1	1.8	2.5	0.0	2.5
SDDSC221	776.0	776.6	0.6	4.1	0.2	4.7
SDDSC221	784.9	785.1	0.2	25.9	0.0	25.9
SDDSC221	813.8	815.0	1.2	2.8	0.0	2.9
SDDSC221	828.8	828.9	0.2	53.6	0.0	53.6
SDDSC221	841.8	842.7	0.9	3.0	0.0	3.0
SDDSC225	594.9	595.3	0.4	24.3	0.1	24.5
SDDSC225	609.0	611.6	2.6	0.9	0.5	2.0
SDDSC225	662.3	664.9	2.7	178.4	0.1	178.6
SDDSC225	668.0	668.5	0.5	4.7	0.0	4.7
SDDSC225	686.9	689.4	2.6	1.1	0.1	1.2
SDDSC225	793.8	797.7	3.9	32.9	0.0	32.9
Including	793.8	794.1	0.4	106.0	0.0	106.0
Including	795.8	796.0	0.3	335.0	0.0	335.0
Including	797.2	797.7	0.5	10.7	0.0	10.7
SDDSC225	913.2	913.6	0.4	7.1	0.0	7.1
SDDSC229	37.1	38.8	1.8	2.3	0.0	2.3
SDDSC229	413.2	413.4	0.2	1.7	3.1	9.2
SDDSC229	430.3	432.8	2.6	0.8	0.5	2.0
SDDSC229	473.9	475.8	1.9	1.7	0.1	2.0
SDDSC229	481.0	483.8	2.8	2.7	0.6	4.3
Including	483.1	483.2	0.2	34.3	6.3	49.5
SDDSC229	489.0	502.2	13.2	6.8	0.4	7.9
Including	489.0	489.6	0.5	12.2	0.7	14.0
Including	491.7	493.9	2.2	14.2	0.7	15.9
Including	495.1	495.4	0.2	25.4	13.0	56.5
Including	498.7	498.8	0.1	261.0	0.7	262.6
SDDSC229	510.9	511.6	0.8	5.9	1.9	10.5
SDDSC229	523.1	531.7	8.6	5.2	1.3	8.2
Including	523.1	524.5	1.4	10.4	2.6	16.7
Including	526.7	528.0	1.3	17.3	3.3	25.1
Including	530.6	531.4	0.8	5.5	0.7	7.1

 

Table 3: All individual assays reported from SDDSC218, SDDSC221, SDDSC225, SDDSC229 and SDDSC236 reported here >0.1g/t AuEq. Individual assay and sample intervals are reported to two decimal places.

Hole number	From (m)	To (m)	Interval (m)	Au g/t	Sb %	AuEq g/t
SDDSC218	372.1	373	0.9	0.15	0.003	0.16
SDDSC218	373	373.7	0.7	0.11	0.004	0.12
SDDSC218	374.8	375.25	0.45	0.25	0.004	0.26
SDDSC218	384	385	1	0.61	0.005	0.62
SDDSC218	385	386	1	0.55	0.05	0.67
SDDSC218	389.9	391	1.1	0.36	2.45	6.22
SDDSC218	392.3	392.55	0.25	0.73	0.2	1.21
SDDSC218	392.55	393.3	0.75	24.5	0.025	24.56
SDDSC218	393.3	394	0.7	0.31	0.013	0.34
SDDSC218	395	396	1	0.15	0.01	0.17
SDDSC218	397.2	397.6	0.4	0.15	0.044	0.26
SDDSC218	400	401	1	0.15	0.005	0.16
SDDSC218	401	402	1	0.26	0.006	0.27
SDDSC218	403	404	1	0.64	0.18	1.07
SDDSC218	404	405.1	1.1	0.21	0.02	0.26
SDDSC218	405.1	405.28	0.18	0.69	0.26	1.31
SDDSC218	405.28	406.2	0.92	0.32	0.022	0.37
SDDSC218	406.2	407.2	1	1.57	0.096	1.80
SDDSC218	407.2	408.2	1	1.69	0.04	1.79
SDDSC218	408.2	409.5	1.3	0.08	0.014	0.11
SDDSC218	409.5	410.35	0.85	1.1	0.38	2.01
SDDSC218	410.35	411	0.65	0.08	0.017	0.12
SDDSC218	411	412.05	1.05	0.94	0.08	1.13
SDDSC218	412.05	412.37	0.32	0.17	0.017	0.21
SDDSC218	414.33	414.85	0.52	0.2	0.01	0.22
SDDSC218	414.85	415.02	0.17	0.58	0.08	0.77
SDDSC218	415.02	415.26	0.24	0.87	0.54	2.16
SDDSC218	416.1	416.67	0.57	0.17	0.008	0.19
SDDSC218	416.67	416.88	0.21	0.79	0.025	0.85
SDDSC218	421.27	422.47	1.2	0.11	0.005	0.12
SDDSC218	425.69	426	0.31	0.18	0.007	0.20
SDDSC218	426.71	427.13	0.42	0.46	0.094	0.68
SDDSC218	427.13	427.65	0.52	0.25	0.28	0.92
SDDSC218	427.65	428.36	0.71	0.1	0.029	0.17
SDDSC218	428.36	428.58	0.22	2.97	0.034	3.05
SDDSC218	428.58	428.81	0.23	1.03	0.053	1.16
SDDSC218	428.81	429.07	0.26	0.36	0.32	1.12
SDDSC218	429.07	429.35	0.28	1.18	0.3	1.90
SDDSC218	429.35	429.86	0.51	0.32	0.076	0.50
SDDSC218	429.86	430.74	0.88	0.16	0.021	0.21
SDDSC218	430.74	431.06	0.32	0.28	0.28	0.95
SDDSC218	431.06	431.42	0.36	0.05	0.044	0.16
SDDSC218	431.42	432.7	1.28	0.05	0.09	0.27
SDDSC218	433.19	433.56	0.37	1.05	0.48	2.20
SDDSC218	433.56	433.88	0.32	1.13	1.16	3.90
SDDSC218	433.88	434.2	0.32	0.25	0.18	0.68
SDDSC218	434.2	434.67	0.47	0.64	1.16	3.41
SDDSC218	435.47	435.6	0.13	0.46	0.23	1.01
SDDSC218	435.6	435.87	0.27	0.8	0.36	1.66
SDDSC218	435.87	437	1.13	0.38	0.04	0.48
SDDSC218	437	437.47	0.47	3.65	0.04	3.75
SDDSC218	437.47	438.22	0.75	0.19	0.017	0.23
SDDSC218	439.5	440.57	1.07	0.35	0.017	0.39
SDDSC218	440.57	440.71	0.14	19.6	3.94	29.02
SDDSC218	440.71	441.6	0.89	0.53	0.016	0.57
SDDSC218	441.6	442.35	0.75	0.16	0.007	0.18
SDDSC218	445.37	445.83	0.46	16.9	1.3	20.01
SDDSC218	445.83	445.97	0.14	0.58	0.73	2.32
SDDSC218	445.97	446.37	0.4	0.63	0.1	0.87
SDDSC218	446.37	447.06	0.69	0.65	0.043	0.75
SDDSC218	447.06	447.67	0.61	1.24	0.4	2.20
SDDSC218	447.67	447.87	0.2	0.7	0.034	0.78
SDDSC218	447.87	448.05	0.18	0.52	2.94	7.55
SDDSC218	448.05	449.3	1.25	0.16	0.066	0.32
SDDSC218	450	450.88	0.88	0.13	0.008	0.15
SDDSC218	450.88	451	0.12	0.68	0.007	0.70
SDDSC218	451.99	452.77	0.78	0.33	0.06	0.47
SDDSC218	452.77	453.04	0.27	2.39	0.98	4.73
SDDSC218	453.04	453.51	0.47	1.62	0.086	1.83
SDDSC218	453.51	454.8	1.29	0.25	0.054	0.38
SDDSC218	460.85	461.18	0.33	19.3	0.026	19.36
SDDSC218	461.18	461.28	0.1	1.31	0.27	1.96
SDDSC218	461.28	461.86	0.58	0.24	0.033	0.32
SDDSC218	461.86	462	0.14	0.59	0.013	0.62
SDDSC218	462.63	462.83	0.2	0.33	0.099	0.57
SDDSC218	463.56	464.49	0.93	7.92	0.032	8.00
SDDSC218	465.08	465.59	0.51	0.27	0.38	1.18
SDDSC218	465.59	466.05	0.46	0.11	0.016	0.15
SDDSC218	466.05	466.59	0.54	0.03	0.042	0.13
SDDSC218	466.59	467.03	0.44	2.15	0.22	2.68
SDDSC218	469.07	469.9	0.83	0.28	0.01	0.30
SDDSC218	469.9	470	0.1	9.27	0.4	10.23
SDDSC218	470	470.57	0.57	0.68	0.31	1.42
SDDSC218	470.57	471.81	1.24	0.49	0.082	0.69
SDDSC218	471.81	472.25	0.44	0.5	0.42	1.50
SDDSC218	472.25	472.35	0.1	7.29	25.6	68.47
SDDSC218	475.03	475.29	0.26	2.03	0.25	2.63
SDDSC218	475.29	475.68	0.39	1.57	0.49	2.74
SDDSC218	476.86	477.06	0.2	0.46	0.054	0.59
SDDSC218	477.06	477.75	0.69	0.13	0.019	0.18
SDDSC218	477.75	478.84	1.09	4.07	0.44	5.12
SDDSC218	478.84	478.96	0.12	48.8	1.15	51.55
SDDSC218	478.96	479.71	0.75	1.08	0.51	2.30
SDDSC218	479.71	480.03	0.32	3.28	0.63	4.79
SDDSC218	480.03	480.38	0.35	4.12	0.86	6.18
SDDSC218	480.38	480.95	0.57	2.08	1.05	4.59
SDDSC218	480.95	481.47	0.52	0.48	0.41	1.46
SDDSC218	481.47	481.76	0.29	2.43	1.23	5.37
SDDSC218	481.76	481.96	0.2	0.84	0.62	2.32
SDDSC218	481.96	482.82	0.86	2.09	0.084	2.29
SDDSC218	483.16	483.34	0.18	0.85	1.27	3.89
SDDSC218	483.34	484.33	0.99	0.38	0.059	0.52
SDDSC218	484.33	485.33	1	1.45	0.27	2.10
SDDSC218	485.33	485.63	0.3	3.18	0.87	5.26
SDDSC218	485.63	485.94	0.31	1.98	1.06	4.51
SDDSC218	485.94	486.44	0.5	1.6	0.4	2.56
SDDSC218	486.44	486.54	0.1	44	0.76	45.82
SDDSC218	486.54	486.78	0.24	0.26	3.71	9.13
SDDSC218	487	487.2	0.2	32.6	23.8	89.48
SDDSC218	487.2	487.52	0.32	4.47	4.48	15.18
SDDSC218	487.52	487.85	0.33	0.58	0.38	1.49
SDDSC218	487.85	488.05	0.2	0.85	0.81	2.79
SDDSC218	488.05	488.44	0.39	0.51	0.17	0.92
SDDSC218	488.44	488.57	0.13	12.8	11.2	39.57
SDDSC218	488.57	489.12	0.55	0.09	0.033	0.17
SDDSC218	489.12	489.69	0.57	0.3	0.079	0.49
SDDSC218	489.69	489.92	0.23	0.75	0.15	1.11
SDDSC218	489.92	490.04	0.12	124	15	159.85
SDDSC218	490.04	490.66	0.62	0.29	0.11	0.55
SDDSC218	490.66	490.76	0.1	1.22	0.13	1.53
SDDSC218	490.76	490.99	0.23	0.09	0.017	0.13
SDDSC218	490.99	491.64	0.65	0.11	0.02	0.16
SDDSC218	494.11	494.73	0.62	0.13	0.017	0.17
SDDSC218	494.73	494.83	0.1	0.19	0.066	0.35
SDDSC218	494.83	495.92	1.09	0.37	0.024	0.43
SDDSC218	495.92	496.3	0.38	29.5	1.61	33.35
SDDSC218	496.3	496.65	0.35	20.8	53.5	148.67
SDDSC218	496.65	497.06	0.41	96.7	0.47	97.82
SDDSC218	497.06	497.39	0.33	6.21	0.026	6.27
SDDSC218	497.39	498.12	0.73	1.14	0.014	1.17
SDDSC218	500.46	500.74	0.28	2.86	0.83	4.84
SDDSC218	500.74	501.1	0.36	3.03	0.53	4.30
SDDSC218	501.1	502	0.9	0.13	0.022	0.18
SDDSC218	503	503.26	0.26	0.41	0.061	0.56
SDDSC218	503.26	503.41	0.15	1.17	0.054	1.30
SDDSC218	503.41	504.23	0.82	0.22	0.025	0.28
SDDSC218	504.23	504.6	0.37	2.9	0.82	4.86
SDDSC218	504.6	505	0.4	8.67	1.1	11.30
SDDSC218	505	505.34	0.34	1.39	0.76	3.21
SDDSC218	505.34	506.3	0.96	0.46	0.088	0.67
SDDSC218	506.3	507.26	0.96	0.19	0.26	0.81
SDDSC218	507.26	507.51	0.25	2.23	2.1	7.25
SDDSC218	507.51	508.29	0.78	1.44	2.17	6.63
SDDSC218	508.29	508.87	0.58	0.5	0.053	0.63
SDDSC218	508.87	509.26	0.39	2.12	0.37	3.00
SDDSC218	509.26	509.88	0.62	0.46	0.037	0.55
SDDSC218	509.88	510.51	0.63	0.28	0.039	0.37
SDDSC218	510.51	511.42	0.91	0.15	0.045	0.26
SDDSC218	511.42	512.22	0.8	0.32	0.021	0.37
SDDSC218	512.22	512.7	0.48	0.14	0.049	0.26
SDDSC218	512.7	513	0.3	1.41	0.22	1.94
SDDSC218	513	513.85	0.85	0.14	0.026	0.20
SDDSC218	513.85	514.62	0.77	0.23	0.035	0.31
SDDSC218	514.62	515.56	0.94	0.04	0.028	0.11
SDDSC218	515.56	516.22	0.66	0.09	0.018	0.13
SDDSC218	516.51	516.94	0.43	0.23	0.06	0.37
SDDSC218	516.94	517.11	0.17	0.47	0.049	0.59
SDDSC218	517.11	517.41	0.3	0.27	0.015	0.31
SDDSC218	517.41	518	0.59	0.09	0.012	0.12
SDDSC218	520.79	520.92	0.13	0.34	0.029	0.41
SDDSC218	526.1	526.66	0.56	8.31	0.016	8.35
SDDSC218	528.41	529.5	1.09	0.15	0.026	0.21
SDDSC218	529.5	530.65	1.15	0.49	0.024	0.55
SDDSC218	530.65	531	0.35	0.17	0.015	0.21
SDDSC218	533.4	533.87	0.47	0.24	0.012	0.27
SDDSC218	533.87	534.12	0.25	1.58	0.026	1.64
SDDSC218	534.12	535.4	1.28	0.12	0.016	0.16
SDDSC218	535.4	536.4	1	0.33	0.019	0.38
SDDSC218	536.4	537	0.6	0.07	0.021	0.12
SDDSC218	537	537.15	0.15	0.73	0.03	0.80
SDDSC218	537.15	537.42	0.27	34.6	0.97	36.92
SDDSC218	537.42	537.6	0.18	0.75	0.086	0.96
SDDSC218	537.6	537.7	0.1	1.56	0.048	1.67
SDDSC218	537.9	538.61	0.71	1.61	0.061	1.76
SDDSC218	538.61	538.83	0.22	0.66	0.25	1.26
SDDSC218	538.83	538.96	0.13	1.88	0.67	3.48
SDDSC218	538.96	539.17	0.21	186	0.33	186.79
SDDSC218	539.17	539.55	0.38	0.4	0.064	0.55
SDDSC218	539.55	539.65	0.1	51	0.32	51.76
SDDSC218	539.65	540.13	0.48	0.03	0.069	0.19
SDDSC218	540.13	540.23	0.1	2.33	0.15	2.69
SDDSC218	540.23	541.18	0.95	0.08	0.024	0.14
SDDSC218	541.18	541.4	0.22	1,290	0.67	1,291.60
SDDSC218	541.4	541.77	0.37	0.21	0.049	0.33
SDDSC218	541.77	542.34	0.57	1.17	0.29	1.86
SDDSC218	542.34	542.5	0.16	1.13	0.087	1.34
SDDSC218	542.5	543.19	0.69	0.72	0.059	0.86
SDDSC218	543.19	543.42	0.23	1.11	0.097	1.34
SDDSC218	543.42	543.79	0.37	8.23	0.28	8.90
SDDSC218	543.79	544.4	0.61	0.52	0.088	0.73
SDDSC218	544.4	544.71	0.31	13.2	0.18	13.63
SDDSC218	548.5	548.87	0.37	0.09	0.056	0.22
SDDSC218	549.6	549.88	0.28	1.28	0.36	2.14
SDDSC218	549.88	550.42	0.54	0.6	0.11	0.86
SDDSC218	550.42	550.88	0.46	0.11	0.028	0.18
SDDSC218	550.88	551.3	0.42	1.14	0.018	1.18
SDDSC218	551.3	551.87	0.57	0.84	0.19	1.29
SDDSC218	551.87	552.17	0.3	1.72	0.77	3.56
SDDSC218	552.17	552.45	0.28	0.79	0.27	1.44
SDDSC218	552.45	553.7	1.25	0.24	0.17	0.65
SDDSC218	553.7	554.81	1.11	0.12	0.005	0.13
SDDSC218	554.81	555.22	0.41	0.16	0.018	0.20
SDDSC218	555.22	555.48	0.26	0.52	0.32	1.28
SDDSC218	555.48	556.35	0.87	0.16	0.021	0.21
SDDSC218	556.35	556.95	0.6	6.29	0.024	6.35
SDDSC218	556.95	557.41	0.46	0.42	0.25	1.02
SDDSC218	564.91	565.04	0.13	0.16	1.81	4.49
SDDSC218	565.04	565.83	0.79	0.06	0.085	0.26
SDDSC218	565.83	566.6	0.77	0.21	0.037	0.30
SDDSC218	571.62	571.99	0.37	0.47	0.03	0.54
SDDSC218	571.99	572.39	0.4	0.49	0.14	0.82
SDDSC218	572.39	572.62	0.23	0.58	0.056	0.71
SDDSC218	572.62	572.9	0.28	0.16	0.019	0.21
SDDSC218	574.74	575.28	0.54	2.36	0.14	2.69
SDDSC218	575.28	575.6	0.32	0.88	0.21	1.38
SDDSC218	575.6	575.79	0.19	0.78	0.02	0.83
SDDSC218	575.79	576.13	0.34	0.75	0.099	0.99
SDDSC218	576.13	576.9	0.77	1.91	0.062	2.06
SDDSC218	576.9	577.14	0.24	0.41	0.027	0.47
SDDSC218	577.14	577.7	0.56	0.53	0.022	0.58
SDDSC218	577.7	578.18	0.48	0.18	0.01	0.20
SDDSC218	578.18	579.06	0.88	0.13	0.012	0.16
SDDSC218	587.73	588.56	0.83	0.09	0.006	0.11
SDDSC218	591.47	592.55	1.08	2.1	0.32	2.86
SDDSC218	592.55	592.81	0.26	1.27	0.36	2.13
SDDSC218	592.81	593.16	0.35	1.81	1.45	5.28
SDDSC218	593.99	594.81	0.82	0.21	0.008	0.23
SDDSC218	594.81	595.82	1.01	0.41	0.047	0.52
SDDSC218	595.82	595.92	0.1	1.02	0.022	1.07
SDDSC218	598.32	598.78	0.46	0.75	0.4	1.71
SDDSC218	598.78	599.41	0.63	0.44	0.2	0.92
SDDSC218	599.41	600.24	0.83	1.09	0.061	1.24
SDDSC218	600.93	601.54	0.61	0.34	0.071	0.51
SDDSC218	609.6	610.9	1.3	0.07	0.024	0.13
SDDSC218	613.5	614.8	1.3	0.24	0.059	0.38
SDDSC218	617.37	618.32	0.95	0.78	0.19	1.23
SDDSC218	618.32	619	0.68	0.4	0.055	0.53
SDDSC218	620	620.92	0.92	0.1	0.01	0.12
SDDSC218	620.92	621.3	0.38	33	0.018	33.04
SDDSC218	625.59	625.95	0.36	0.96	0.54	2.25
SDDSC218	627.68	628.23	0.55	0.37	0.009	0.39
SDDSC218	628.83	629.49	0.66	0.14	0.017	0.18
SDDSC218	630.74	630.93	0.19	0.67	0.01	0.69
SDDSC218	630.93	632.2	1.27	0.19	0.003	0.20
SDDSC218	632.2	633.44	1.24	0.19	0.004	0.20
SDDSC218	633.44	633.65	0.21	1.53	0.44	2.58
SDDSC218	633.65	634.18	0.53	0.73	0.13	1.04
SDDSC218	634.18	634.7	0.52	0.63	0.078	0.82
SDDSC218	634.7	635.54	0.84	0.13	0.012	0.16
SDDSC218	635.54	636.32	0.78	0.23	0.14	0.56
SDDSC218	638.53	638.78	0.25	0.3	0.12	0.59
SDDSC218	638.78	639.23	0.45	0.21	0.019	0.26
SDDSC218	640.77	640.88	0.11	0.07	0.036	0.16
SDDSC218	646.08	646.48	0.4	4.63	0.3	5.35
SDDSC218	646.48	646.86	0.38	1.14	2.16	6.30
SDDSC218	646.86	647.86	1	0.12	2.42	5.90
SDDSC218	647.86	648.28	0.42	0.6	0.32	1.36
SDDSC218	648.28	648.7	0.42	0.2	0.24	0.77
SDDSC218	648.7	649.58	0.88	0.88	0.29	1.57
SDDSC218	649.58	649.73	0.15	0.62	0.54	1.91
SDDSC218	649.73	649.87	0.14	0.45	0.53	1.72
SDDSC218	649.87	650.85	0.98	0.54	0.16	0.92
SDDSC218	650.85	651.78	0.93	0.35	0.33	1.14
SDDSC218	651.78	652.15	0.37	0.2	0	0.20
SDDSC218	652.15	652.72	0.57	0.98	0.85	3.01
SDDSC218	653.97	654.3	0.33	219	0.42	220.00
SDDSC218	654.3	655.05	0.75	0.26	0.12	0.55
SDDSC218	655.05	655.76	0.71	0.6	0.68	2.23
SDDSC218	655.76	656.26	0.5	0.14	0.19	0.59
SDDSC218	657.52	657.69	0.17	0.05	0.08	0.24
SDDSC218	658.96	659.22	0.26	0.42	0.27	1.07
SDDSC218	659.22	659.43	0.21	0.47	0.29	1.16
SDDSC218	659.98	661.07	1.09	5.98	0.097	6.21
SDDSC218	662.67	663.05	0.38	0.29	0.031	0.36
SDDSC218	664.04	664.45	0.41	0.55	0.007	0.57
SDDSC218	664.71	664.97	0.26	0.73	0.62	2.21
SDDSC218	664.97	665.3	0.33	2.47	0.24	3.04
SDDSC218	665.3	666.1	0.8	0.09	0.005	0.10
SDDSC218	672.54	672.79	0.25	2.17	0.024	2.23
SDDSC218	678.07	678.2	0.13	0.03	1.11	2.68
SDDSC218	680.75	681.46	0.71	0.55	0.033	0.63
SDDSC218	681.46	681.84	0.38	0.23	0.014	0.26
SDDSC218	683	683.7	0.7	0.4	0.027	0.46
SDDSC218	683.7	684	0.3	2.21	0.027	2.27
SDDSC218	684	685	1	0.15	0.017	0.19
SDDSC218	692	693	1	0.05	0.03	0.12
SDDSC218	704.4	705.3	0.9	6.45	0.05	6.57
SDDSC218	705.3	705.7	0.4	0.21	0.037	0.30
SDDSC218	705.8	706.3	0.5	5.09	0.016	5.13
SDDSC218	707.4	708.17	0.77	0.92	0.013	0.95
SDDSC218	711.45	712.3	0.85	0.1	0.015	0.14
SDDSC218	712.3	712.9	0.6	1.7	0.079	1.89
SDDSC218	712.9	713.8	0.9	0.42	0.012	0.45
SDDSC218	713.8	714.8	1	0.25	0.005	0.26
SDDSC218	715.45	716.05	0.6	0.08	0.015	0.12
SDDSC218	716.05	716.9	0.85	0.23	0.032	0.31
SDDSC218	716.9	717.4	0.5	0.89	0.071	1.06
SDDSC218	717.4	718.1	0.7	0.15	0.017	0.19
SDDSC218	720.08	720.51	0.43	0.54	0.003	0.55
SDDSC218	720.51	721.41	0.9	0.08	0.013	0.11
SDDSC218	721.41	721.99	0.58	0.73	0.14	1.06
SDDSC218	721.99	722.6	0.61	0.11	0.048	0.22
SDDSC218	722.6	722.94	0.34	2.27	0.56	3.61
SDDSC218	722.94	723.39	0.45	5.3	0.26	5.92
SDDSC218	723.39	723.55	0.16	0.29	0.018	0.33
SDDSC218	723.55	723.65	0.1	44	0.013	44.03
SDDSC218	723.65	723.95	0.3	0.11	0.019	0.16
SDDSC218	723.95	724.45	0.5	0.37	0.018	0.41
SDDSC218	724.45	724.91	0.46	0.21	0.017	0.25
SDDSC218	724.91	725.62	0.71	0.13	0.014	0.16
SDDSC218	726.67	727.21	0.54	1.8	0.76	3.62
SDDSC218	732.77	733.78	1.01	0.12	0.01	0.14
SDDSC218	733.78	734.44	0.66	0.21	0.008	0.23
SDDSC218	734.44	735.15	0.71	0.69	0.021	0.74
SDDSC218	735.15	735.42	0.27	45.8	11.3	72.81
SDDSC218	735.42	735.78	0.36	10.8	0.29	11.49
SDDSC218	735.78	735.98	0.2	0.12	0.017	0.16
SDDSC218	741.08	741.75	0.67	0.47	0.021	0.52
SDDSC218	743	743.71	0.71	1.25	0.002	1.25
SDDSC218	744.25	744.58	0.33	11.4	0.019	11.45
SDDSC218	744.58	744.92	0.34	14.8	0.005	14.81
SDDSC218	744.92	745.53	0.61	0.49	0.32	1.25
SDDSC218	745.53	745.89	0.36	0.08	0.052	0.20
SDDSC218	746.54	747	0.46	0.16	0.022	0.21
SDDSC218	747	747.67	0.67	0.23	0.044	0.34
SDDSC218	747.67	748.15	0.48	0.19	0.26	0.81
SDDSC218	748.15	749.06	0.91	0.13	0.006	0.15
SDDSC218	749.48	750	0.52	0.14	0.014	0.17
SDDSC218	751.56	752.26	0.7	0.26	0.049	0.38
SDDSC218	752.26	752.92	0.66	0.6	0.003	0.61
SDDSC218	752.92	753.3	0.38	0.23	0.002	0.24
SDDSC218	753.3	754	0.7	0.11	0.001	0.11
SDDSC218	756.11	756.68	0.57	0.19	0.002	0.20
SDDSC218	756.68	757.12	0.44	0.36	0.002	0.36
SDDSC218	757.12	757.73	0.61	0.88	8E-04	0.88
SDDSC218	757.73	757.95	0.22	0.56	0.002	0.56
SDDSC218	757.95	758.39	0.44	0.54	0.001	0.54
SDDSC218	758.39	758.96	0.57	0.49	0.003	0.50
SDDSC218	758.96	759.37	0.41	0.19	0.003	0.20
SDDSC218	759.37	760.03	0.66	0.26	0.002	0.26
SDDSC218	760.03	760.59	0.56	0.45	0.002	0.46
SDDSC218	760.59	760.94	0.35	1.18	0.007	1.20
SDDSC218	760.94	761.45	0.51	0.54	0.003	0.55
SDDSC218	761.45	761.77	0.32	0.1	0.002	0.11
SDDSC218	761.77	762.55	0.78	0.43	0.005	0.44
SDDSC218	762.55	763.22	0.67	0.23	0.041	0.33
SDDSC218	763.22	763.91	0.69	0.11	0.043	0.21
SDDSC218	763.91	764.08	0.17	0.22	0.33	1.01
SDDSC218	764.08	764.65	0.57	0.15	0.11	0.41
SDDSC218	764.65	765.34	0.69	2.71	0.28	3.38
SDDSC218	765.34	765.84	0.5	0.23	0.068	0.39
SDDSC218	765.84	766.05	0.21	1.12	0.033	1.20
SDDSC218	766.05	766.63	0.58	0.13	0.013	0.16
SDDSC218	766.63	767.74	1.11	0.07	0.021	0.12
SDDSC218	767.74	767.84	0.1	0.15	0.55	1.46
SDDSC218	767.84	768.62	0.78	0.14	0.051	0.26
SDDSC218	772.91	773.26	0.35	0.17	0.01	0.19
SDDSC218	774.5	775.75	1.25	0.17	0.008	0.19
SDDSC218	775.75	776.4	0.65	0.48	0.004	0.49
SDDSC218	776.4	776.56	0.16	0.5	0.015	0.54
SDDSC221	452.2	453.3	1.1	0.57	0.022	0.62
SDDSC221	453.3	454.27	0.97	0.46	0.033	0.54
SDDSC221	454.27	455.21	0.94	0.23	0.005	0.24
SDDSC221	456.15	457	0.85	0.37	0.01	0.39
SDDSC221	457	457.56	0.56	1.75	0.018	1.79
SDDSC221	457.56	458.09	0.53	0.85	0.15	1.21
SDDSC221	458.09	459.37	1.28	0.57	0.079	0.76
SDDSC221	459.37	460.1	0.73	1.04	0.058	1.18
SDDSC221	460.1	460.28	0.18	1.06	0.66	2.64
SDDSC221	460.28	460.94	0.66	4.19	2.65	10.52
SDDSC221	460.94	462.07	1.13	1.77	0.18	2.20
SDDSC221	462.07	463.37	1.3	0.17	0.012	0.20
SDDSC221	463.37	464.67	1.3	0.67	0.073	0.84
SDDSC221	464.67	465.97	1.3	0.06	0.054	0.19
SDDSC221	499.64	500.9	1.26	0.57	0.004	0.58
SDDSC221	510	511.3	1.3	0.2	0.018	0.24
SDDSC221	522.25	522.92	0.67	0.38	0.052	0.50
SDDSC221	527.44	527.63	0.19	2.23	0.49	3.40
SDDSC221	528.76	529.02	0.26	0.08	0.08	0.27
SDDSC221	529.86	530.08	0.22	0.44	1.49	4.00
SDDSC221	530.08	530.71	0.63	0.15	0.022	0.20
SDDSC221	531.45	531.68	0.23	0.29	0.023	0.34
SDDSC221	535.56	535.82	0.26	1.14	0.011	1.17
SDDSC221	535.82	536.19	0.37	0.87	0.012	0.90
SDDSC221	539.25	540.23	0.98	0.3	0.027	0.36
SDDSC221	544.22	544.68	0.46	0.48	0.032	0.56
SDDSC221	545.47	546.09	0.62	0.1	0.003	0.11
SDDSC221	555.91	556.2	0.29	0.43	0.003	0.44
SDDSC221	556.2	557.13	0.93	0.2	0.003	0.21
SDDSC221	557.13	558.12	0.99	0.93	0.033	1.01
SDDSC221	558.12	558.84	0.72	0.41	0.008	0.43
SDDSC221	559.58	560.4	0.82	0.21	0.023	0.26
SDDSC221	560.4	560.5	0.1	0.67	0.55	1.98
SDDSC221	562.98	563.74	0.76	0.13	0.06	0.27
SDDSC221	563.74	564.16	0.42	0.2	0.14	0.53
SDDSC221	564.16	564.75	0.59	0.11	0.083	0.31
SDDSC221	564.75	564.91	0.16	0.19	0.65	1.74
SDDSC221	564.91	565.97	1.06	0.03	0.038	0.12
SDDSC221	567.27	568.03	0.76	0.41	0.007	0.43
SDDSC221	568.03	568.51	0.48	6.57	0.02	6.62
SDDSC221	568.51	568.9	0.39	0.32	0.015	0.36
SDDSC221	568.9	569.27	0.37	0.03	0.034	0.11
SDDSC221	569.27	570.16	0.89	0.08	0.036	0.17
SDDSC221	585.94	586.37	0.43	1.66	0.63	3.17
SDDSC221	586.37	587.21	0.84	1.71	1.3	4.82
SDDSC221	587.21	588	0.79	0.15	0.061	0.30
SDDSC221	588	588.76	0.76	2.74	0.15	3.10
SDDSC221	589.42	589.87	0.45	0.16	0.021	0.21
SDDSC221	589.87	590.76	0.89	0.12	0.061	0.27
SDDSC221	590.76	590.88	0.12	1.05	0.29	1.74
SDDSC221	590.88	591.77	0.89	0.14	0.019	0.19
SDDSC221	591.77	591.99	0.22	0.33	1.37	3.60
SDDSC221	591.99	593	1.01	0.24	0.017	0.28
SDDSC221	597.84	599	1.16	0.91	0.008	0.93
SDDSC221	609.58	610.14	0.56	0.09	0.028	0.16
SDDSC221	610.14	610.4	0.26	0.86	0.042	0.96
SDDSC221	610.4	611.14	0.74	2.65	5.71	16.30
SDDSC221	611.14	612.18	1.04	4.69	0.61	6.15
SDDSC221	612.18	612.78	0.6	0.41	0.63	1.92
SDDSC221	612.78	613.49	0.71	0.36	0.25	0.96
SDDSC221	615.56	616.45	0.89	0.22	0.31	0.96
SDDSC221	616.45	617.66	1.21	0.45	0.18	0.88
SDDSC221	617.66	618.49	0.83	0.64	0.3	1.36
SDDSC221	618.49	619.12	0.63	1.1	0.33	1.89
SDDSC221	619.12	619.42	0.3	0.73	0.019	0.78
SDDSC221	619.42	620.05	0.63	0.1	0.014	0.13
SDDSC221	622.14	622.58	0.44	0.05	0.032	0.13
SDDSC221	622.58	622.7	0.12	0.36	1.11	3.01
SDDSC221	627.2	627.44	0.24	13.5	0.16	13.88
SDDSC221	629.84	630	0.16	5.12	0.06	5.26
SDDSC221	630.93	631.31	0.38	1.24	0.037	1.33
SDDSC221	631.31	631.87	0.56	1.35	0.16	1.7324
SDDSC221	639.56	639.9	0.34	0.76	0.046	0.86994
SDDSC221	643.93	644.04	0.11	0.37	0.028	0.43692
SDDSC221	646.55	647.11	0.56	0.09	0.02	0.1378
SDDSC221	649.26	649.67	0.41	0.69	0.01	0.713422
SDDSC221	651.3	651.82	0.52	0.1	0.22	0.6258
SDDSC221	651.82	652.09	0.27	0.07	0.059	0.21101
SDDSC221	652.09	653	0.91	<0.01	0.12	0.2768
SDDSC221	655.52	655.66	0.14	0.27	8.82	21.3498
SDDSC221	656.9	657.45	0.55	7.43	0.022	7.48258
SDDSC221	657.45	657.68	0.23	12.1	0.18	12.5302
SDDSC221	658.66	659.41	0.75	0.31	0.015	0.34585
SDDSC221	660.86	661.1	0.24	2.93	3.51	11.3189
SDDSC221	669.9	671.2	1.3	1.22	0.032	1.29648
SDDSC221	673.5	673.92	0.42	0.1	0.073	0.27447
SDDSC221	673.92	674.84	0.92	0.04	0.028	0.10692
SDDSC221	677.4	677.74	0.34	0.35	0.082	0.54598
SDDSC221	679.58	679.96	0.38	0.14	0.018	0.18302
SDDSC221	679.96	680.06	0.1	11.7	0.008	11.71864
SDDSC221	680.49	680.6	0.11	334	0.012	334.0287
SDDSC221	680.6	680.96	0.36	447	0.012	447.0287
SDDSC221	680.96	681.54	0.58	0.74	0.017	0.78063
SDDSC221	681.54	681.84	0.3	0.08	0.014	0.11346
SDDSC221	683.69	684.1	0.41	0.31	0.009	0.332466
SDDSC221	693.91	694.02	0.11	4.1	0.35	4.9365
SDDSC221	696.5	697.21	0.71	0.7	0.07	0.8673
SDDSC221	698.09	699.1	1.01	0.07	0.14	0.4046
SDDSC221	699.1	700.21	1.11	0.01	0.061	0.15579
SDDSC221	701.3	701.81	0.51	0.17	0.031	0.24409
SDDSC221	702.61	703.42	0.81	0.24	0.007	0.257447
SDDSC221	703.42	704.3	0.88	4.51	0.007	4.526969
SDDSC221	709.5	710.69	1.19	0.64	0.006	0.654101
SDDSC221	717.46	718.11	0.65	0.86	0.008	0.878642
SDDSC221	725.35	726.3	0.95	0.31	0.009	0.330554
SDDSC221	726.3	726.89	0.59	0.96	0.006	0.974579
SDDSC221	726.89	728.13	1.24	0.14	0.003	0.146931
SDDSC221	728.74	729.66	0.92	0.21	0.006	0.223623
SDDSC221	729.66	730.12	0.46	0.4	0.004	0.410277
SDDSC221	730.12	730.34	0.22	0.29	0.004	0.300277
SDDSC221	731.31	731.5	0.19	1	0.036	1.08604
SDDSC221	731.85	732.19	0.34	0.1	0.004	0.108843
SDDSC221	733.3	733.46	0.16	0.37	0.15	0.7285
SDDSC221	733.46	733.63	0.17	4.28	0.15	4.6385
SDDSC221	733.63	733.93	0.3	0.24	0.028	0.30692
SDDSC221	733.93	734.18	0.25	0.1	0.022	0.15258
SDDSC221	734.18	734.62	0.44	0.15	0.15	0.5085
SDDSC221	734.62	735.62	1	0.11	0.004	0.118843
SDDSC221	740.31	740.77	0.46	7.43	0.011	7.45629
SDDSC221	740.77	741.12	0.35	0.36	0.011	0.38629
SDDSC221	741.12	742.12	1	0.98	0.009	1.000554
SDDSC221	742.12	742.47	0.35	0.54	0.004	0.549321
SDDSC221	742.47	743.46	0.99	0.32	0.028	0.38692
SDDSC221	752.58	752.78	0.2	0.18	0.007	0.195535
SDDSC221	757.07	757.58	0.51	0.56	0.005	0.571233
SDDSC221	757.58	757.91	0.33	2.93	0.007	2.945535
SDDSC221	773.02	774	0.98	0.07	0.019	0.11541
SDDSC221	774	775	1	0.19	0.018	0.23302
SDDSC221	775	775.47	0.47	0.13	0.029	0.19931
SDDSC221	775.47	776	0.53	0.59	0.083	0.78837
SDDSC221	776	776.58	0.58	4.14	0.22	4.6658
SDDSC221	784.85	785.08	0.23	25.9	0.004	25.9098
SDDSC221	785.08	785.77	0.69	0.09	0.005	0.102667
SDDSC221	787.22	788.1	0.88	0.2	0.003	0.206931
SDDSC221	788.54	789.2	0.66	0.25	0.004	0.258604
SDDSC221	793.2	794.5	1.3	0.16	0.039	0.25321
SDDSC221	794.5	795.3	0.8	0.27	0.023	0.32497
SDDSC221	795.3	796	0.7	0.07	0.015	0.10585
SDDSC221	812.2	813	0.8	0.19	0.012	0.21868
SDDSC221	813	813.78	0.78	0.34	0.005	0.351233
SDDSC221	813.78	814.74	0.96	1.4	0.006	1.413145
SDDSC221	814.74	814.95	0.21	9.43	0.004	9.438604
SDDSC221	817.5	818.27	0.77	0.21	0.002	0.214302
SDDSC221	819.2	819.65	0.45	0.21	0.004	0.220516
SDDSC221	819.65	820.1	0.45	0.64	0.005	0.650755
SDDSC221	822.5	823.17	0.67	0.32	0.007	0.336252
SDDSC221	823.17	824	0.83	0.18	0.004	0.190277
SDDSC221	827.1	827.42	0.32	0.59	0.006	0.604818
SDDSC221	827.42	827.63	0.21	0.24	6E-04	0.241362
SDDSC221	827.63	828.75	1.12	0.22	0.004	0.229082
SDDSC221	828.75	828.91	0.16	53.6	0.002	53.60406
SDDSC221	828.91	829.8	0.89	0.91	0.003	0.917648
SDDSC221	829.8	830.39	0.59	0.16	0.004	0.168843
SDDSC221	830.39	830.76	0.37	0.51	0.003	0.515975
SDDSC221	830.76	831.56	0.8	0.36	0.003	0.366214
SDDSC221	834.25	834.79	0.54	0.24	0.004	0.249799
SDDSC221	834.79	835.3	0.51	0.12	0.003	0.128126
SDDSC221	841.76	842.65	0.89	2.95	0.004	2.960038
SDDSC221	845.88	846.1	0.22	0.28	0.006	0.294101
SDDSC221	852.69	853	0.31	0.22	0.008	0.238403
SDDSC221	853	853.64	0.64	0.14	0.002	0.145019
SDDSC221	853.64	853.94	0.3	0.52	0.004	0.528843
SDDSC221	853.94	854.09	0.15	0.15	0.002	0.154541
SDDSC221	854.09	855.32	1.23	0.31	0.003	0.31717
SDDSC221	855.32	855.65	0.33	0.16	0.002	0.165019
SDDSC221	855.65	856.47	0.82	0.22	0.002	0.225019
SDDSC221	857.64	858	0.36	0.16	0.002	0.164541
SDDSC221	859	860	1	0.23	0.002	0.235497
SDDSC221	860	860.93	0.93	0.36	0.004	0.368843
SDDSC221	860.93	862	1.07	0.34	0.005	0.352189
SDDSC221	862.63	863.43	0.8	0.17	0.002	0.175736
SDDSC221	863.43	864.51	1.08	0.14	0.002	0.144541
SDDSC221	869	870.14	1.14	0.1	0.001	0.103346
SDDSC225	525.12	526	0.88	0.98	0.007	0.995774
SDDSC225	553.62	553.89	0.27	0.4	0.014	0.43346
SDDSC225	553.89	554.32	0.43	0.06	0.034	0.14126
SDDSC225	554.32	554.72	0.4	0.16	0.3	0.877
SDDSC225	555.5	555.64	0.14	0.5	0.38	1.4082
SDDSC225	556.86	557.16	0.3	0.49	0.011	0.51629
SDDSC225	557.76	557.93	0.17	0.25	0.04	0.3456
SDDSC225	558.92	559.62	0.7	0.63	0.026	0.69214
SDDSC225	561.85	562.12	0.27	0.42	0.34	1.2326
SDDSC225	573.57	574.18	0.61	0.16	0.012	0.18868
SDDSC225	574.18	575.4	1.22	0.05	0.029	0.11931
SDDSC225	576.36	577.4	1.04	0.11	0.009	0.130554
SDDSC225	577.4	578.63	1.23	0.05	0.05	0.1695
SDDSC225	580.92	581.43	0.51	1.94	0.32	2.7048
SDDSC225	583.09	584.16	1.07	0.12	0.17	0.5263
SDDSC225	586.6	587.56	0.96	0.19	0.13	0.5007
SDDSC225	587.56	587.97	0.41	0.13	0.006	0.144818
SDDSC225	587.97	588.75	0.78	0.07	0.026	0.13214
SDDSC225	588.75	589.97	1.22	0.15	0.072	0.32208
SDDSC225	589.97	590.49	0.52	0.13	0.14	0.4646
SDDSC225	591.5	592.06	0.56	0.08	0.014	0.11346
SDDSC225	592.06	593.23	1.17	0.42	0.058	0.55862
SDDSC225	593.23	594.29	1.06	0.04	0.087	0.24793
SDDSC225	594.94	595.3	0.36	24.3	0.1	24.539
SDDSC225	597.32	597.78	0.46	0.1	0.061	0.24579
SDDSC225	597.78	598.04	0.26	0.4	0.072	0.57208
SDDSC225	598.83	599.85	1.02	0.17	0.073	0.34447
SDDSC225	599.85	600.09	0.24	0.59	2	5.37
SDDSC225	600.09	600.8	0.71	0.08	0.16	0.4624
SDDSC225	604.9	605.22	0.32	0.19	0.3	0.907
SDDSC225	609	609.31	0.31	1.57	0.99	3.9361
SDDSC225	609.6	610.19	0.59	0.64	0.52	1.8828
SDDSC225	610.19	610.66	0.47	2.09	0.81	4.0259
SDDSC225	610.66	611	0.34	0.61	0.14	0.9446
SDDSC225	611	611.41	0.41	0.29	0.15	0.6485
SDDSC225	611.41	611.64	0.23	0.31	0.71	2.0069
SDDSC225	612.77	613.05	0.28	0.33	0.021	0.38019
SDDSC225	613.05	614.29	1.24	0.08	0.023	0.13497
SDDSC225	620.15	620.37	0.22	0.18	0.017	0.22063
SDDSC225	627.06	627.25	0.19	0.9	0.97	3.2183
SDDSC225	631.69	632.77	1.08	0.2	0.012	0.22868
SDDSC225	632.77	633.27	0.5	1.01	0.83	2.9937
SDDSC225	633.27	633.89	0.62	0.09	0.031	0.16409
SDDSC225	634.51	634.95	0.44	0.31	0.018	0.35302
SDDSC225	634.95	636	1.05	0.33	0.005	0.34195
SDDSC225	640.08	640.22	0.14	0.2	0.013	0.23107
SDDSC225	645.12	645.31	0.19	0.2	1.75	4.3825
SDDSC225	645.31	645.42	0.11	0.75	2.08	5.7212
SDDSC225	654.72	655.08	0.36	0.22	0.016	0.25824
SDDSC225	655.43	656.02	0.59	0.43	0.21	0.9319
SDDSC225	656.02	656.27	0.25	0.28	0.042	0.38038
SDDSC225	656.27	656.69	0.42	1.16	0.014	1.19346
SDDSC225	660.69	661.01	0.32	0.9	0.024	0.95736
SDDSC225	661.01	662.08	1.07	0.37	0.018	0.41302
SDDSC225	662.08	662.27	0.19	0.16	0.014	0.19346
SDDSC225	662.27	663.12	0.85	512	0.3	512.717
SDDSC225	663.12	663.77	0.65	5.75	0.026	5.81214
SDDSC225	663.77	663.88	0.11	16.6	0.015	16.63585
SDDSC225	663.88	664.72	0.84	0.14	0.018	0.18302
SDDSC225	664.72	664.93	0.21	160	0.021	160.0502
SDDSC225	667.1	667.99	0.89	0.13	0.013	0.16107
SDDSC225	667.99	668.5	0.51	4.72	0.01	4.7439
SDDSC225	680.74	681.2	0.46	0.12	0.015	0.15585
SDDSC225	684.71	685.39	0.68	0.16	0.034	0.24126
SDDSC225	686.86	687.89	1.03	1.05	0.058	1.18862
SDDSC225	687.89	688.2	0.31	5.37	0.013	5.40107
SDDSC225	689.32	689.42	0.1	0.16	1.02	2.5978
SDDSC225	689.73	690.03	0.3	0.37	0.017	0.41063
SDDSC225	700.85	701.49	0.64	0.17	0.004	0.17956
SDDSC225	701.49	702.5	1.01	0.15	0.003	0.158126
SDDSC225	702.5	703.63	1.13	0.59	0.005	0.600994
SDDSC225	704.41	704.96	0.55	0.4	0.004	0.409321
SDDSC225	712.2	712.75	0.55	0.09	0.005	0.101472
SDDSC225	722.17	722.36	0.19	0.42	0.003	0.427887
SDDSC225	731.91	732.29	0.38	0.1	0.002	0.105736
SDDSC225	737.55	738	0.45	0.16	0.006	0.173145
SDDSC225	738.47	739.13	0.66	0.5	0.005	0.512189
SDDSC225	739.13	740.05	0.92	0.86	0.018	0.90302
SDDSC225	740.05	740.29	0.24	3.21	0.003	3.217887
SDDSC225	741.3	742	0.7	0.21	0.064	0.36296
SDDSC225	742	743	1	0.42	0.24	0.9936
SDDSC225	743	743.37	0.37	0.2	0.07	0.3673
SDDSC225	744	744.69	0.69	0.09	0.008	0.109837
SDDSC225	744.69	745.63	0.94	0.1	0.01	0.1239
SDDSC225	746.5	747.38	0.88	0.1	0.004	0.109321
SDDSC225	748.16	748.65	0.49	0.09	0.006	0.104818
SDDSC225	756.89	757.68	0.79	0.1	0.003	0.107887
SDDSC225	757.68	758.9	1.22	0.1	0.003	0.106692
SDDSC225	764.36	764.82	0.46	0.37	0.004	0.380277
SDDSC225	769.76	770.2	0.44	0.3	0.31	1.0409
SDDSC225	770.2	770.51	0.31	0.16	0.022	0.21258
SDDSC225	770.51	771	0.49	0.08	0.008	0.100076
SDDSC225	776.39	776.87	0.48	0.08	0.018	0.12302
SDDSC225	776.87	777.65	0.78	0.22	0.003	0.228126
SDDSC225	777.65	778.57	0.92	0.31	0.002	0.315736
SDDSC225	778.57	779.29	0.72	0.12	0.004	0.129082
SDDSC225	793.78	794.14	0.36	106	0.009	106.0203
SDDSC225	794.14	794.54	0.4	0.28	0.012	0.30868
SDDSC225	794.54	795.35	0.81	0.15	0.018	0.19302
SDDSC225	795.35	795.78	0.43	1.1	0.016	1.13824
SDDSC225	795.78	796.03	0.25	335	0.013	335.0311
SDDSC225	796.03	796.21	0.18	1.57	0.012	1.59868
SDDSC225	796.21	796.44	0.23	0.66	0.006	0.674101
SDDSC225	796.44	796.82	0.38	0.41	0.007	0.42673
SDDSC225	796.82	797.18	0.36	0.53	0.006	0.545296
SDDSC225	797.18	797.7	0.52	10.7	0.014	10.73346
SDDSC225	797.7	798.13	0.43	0.49	0.005	0.502667
SDDSC225	799.36	799.8	0.44	0.22	0.034	0.30126
SDDSC225	799.8	800.82	1.02	0.33	0.005	0.341233
SDDSC225	800.82	801.56	0.74	0.26	0.005	0.271233
SDDSC225	801.56	801.84	0.28	0.52	0.009	0.540315
SDDSC225	801.84	802.61	0.77	0.16	0.006	0.174818
SDDSC225	804	805.05	1.05	0.16	0.011	0.18629
SDDSC225	805.05	805.53	0.48	0.13	0.005	0.142428
SDDSC225	805.53	806.46	0.93	0.13	0.005	0.140994
SDDSC225	818.39	818.72	0.33	0.24	0.047	0.35233
SDDSC225	818.72	819.03	0.31	0.1	0.035	0.18365
SDDSC225	819.03	819.77	0.74	0.28	0.005	0.29195
SDDSC225	819.97	820.7	0.73	0.18	0.004	0.190516
SDDSC225	820.7	821.78	1.08	0.14	0.005	0.152906
SDDSC225	829	829.72	0.72	0.18	0.003	0.186931
SDDSC225	829.72	830.05	0.33	1.03	0.004	1.040516
SDDSC225	830.05	831	0.95	0.25	0.017	0.29063
SDDSC225	833.1	834.14	1.04	0.17	0.004	0.179799
SDDSC225	834.14	835.12	0.98	0.13	0.007	0.147447
SDDSC225	838.19	839	0.81	0.14	0.005	0.152189
SDDSC225	839	839.23	0.23	0.27	0.002	0.274302
SDDSC225	839.23	839.65	0.42	0.59	0.002	0.594063
SDDSC225	841	842.11	1.11	0.14	0.003	0.147648
SDDSC225	843.25	844	0.75	0.14	0.003	0.14717
SDDSC225	845.46	846.09	0.63	0.12	0.003	0.125975
SDDSC225	849.26	849.71	0.45	0.15	0.063	0.30057
SDDSC225	849.71	850.27	0.56	0.06	0.034	0.14126
SDDSC225	850.27	850.89	0.62	0.18	0.05	0.2995
SDDSC225	850.89	851.82	0.93	0.1	0.019	0.14541
SDDSC225	851.82	852.35	0.53	0.24	0.018	0.28302
SDDSC225	852.35	852.75	0.4	0.11	0.005	0.122667
SDDSC225	853.52	854.15	0.63	0.12	0.004	0.128843
SDDSC225	854.93	855.74	0.81	0.2	0.006	0.213862
SDDSC225	862.3	863.05	0.75	0.05	0.026	0.11214
SDDSC225	863.36	863.92	0.56	0.19	0.002	0.195497
SDDSC225	863.92	864.24	0.32	0.46	0.001	0.463107
SDDSC225	864.24	864.67	0.43	0.21	0.002	0.215258
SDDSC225	864.67	864.84	0.17	0.19	0.003	0.19717
SDDSC225	864.84	865.25	0.41	0.26	0.005	0.272667
SDDSC225	865.25	865.42	0.17	0.86	0.01	0.8839
SDDSC225	866.77	867.17	0.4	0.11	0.002	0.115497
SDDSC225	868.8	869.54	0.74	0.18	0.003	0.187648
SDDSC225	874.59	875.05	0.46	0.87	0.005	0.882906
SDDSC225	876.44	877.44	1	0.14	0.003	0.145975
SDDSC225	877.44	877.87	0.43	0.14	0.006	0.153623
SDDSC225	877.87	878.2	0.33	0.83	0.003	0.836931
SDDSC225	890.45	891.27	0.82	0.14	0.002	0.145736
SDDSC225	892.45	892.64	0.19	1.26	0.002	1.264541
SDDSC225	893.44	893.6	0.16	0.71	0.002	0.71478
SDDSC225	893.6	894.27	0.67	0.46	0.002	0.464302
SDDSC225	894.27	894.71	0.44	0.56	0.004	0.568604
SDDSC225	896.7	897.49	0.79	0.14	0.002	0.145258
SDDSC225	898.62	899.84	1.22	0.1	0.003	0.108126
SDDSC225	900.14	901.14	1	0.15	0.003	0.155975
SDDSC225	901.14	902.14	1	0.19	0.002	0.194541
SDDSC225	907.91	909.08	1.17	0.81	0.004	0.818365
SDDSC225	913.24	913.6	0.36	7.12	0.009	7.140793
SDDSC225	913.6	914	0.4	0.23	0.01	0.253661
SDDSC225	914	914.96	0.96	0.31	0.017	0.35063
SDDSC225	927	927.37	0.37	0.21	0.005	0.222428
SDDSC225	927.37	928.48	1.11	0.15	0.005	0.161711
SDDSC225	929.06	930.04	0.98	0.33	0.005	0.34195
SDDSC225	930.04	931.2	1.16	0.2	0.003	0.206692
SDDSC225	932	932.32	0.32	2.07	0.005	2.082428
SDDSC225	932.32	932.87	0.55	2.14	0.002	2.144302
SDDSC225	934.57	935.26	0.69	0.24	0.002	0.243585
SDDSC225	935.26	935.8	0.54	3.23	0.003	3.237648
SDDSC225	935.8	936.2	0.4	0.24	0.003	0.246453
SDDSC225	936.2	936.49	0.29	0.83	0.004	0.839321
SDDSC225	936.49	936.97	0.48	0.21	0.003	0.215975
SDDSC225	936.97	937.4	0.43	0.65	0.002	0.654541
SDDSC225	937.4	938.52	1.12	0.14	0.002	0.14478
SDDSC225	938.52	938.82	0.3	0.22	0.001	0.223107
SDDSC225	938.82	939.34	0.52	0.14	0.002	0.145736
SDDSC225	939.34	939.99	0.65	0.14	0.006	0.154101
SDDSC225	941.85	942.36	0.51	0.25	0.002	0.254063
SDDSC225	942.36	943.64	1.28	0.11	0.002	0.113824
SDDSC225	943.64	944.44	0.8	0.5	0.002	0.504302
SDDSC229	37.07	37.84	0.77	2.26	0.002	2.26478
SDDSC229	37.84	38.84	1	2.29	0.004	2.300038
SDDSC229	40.08	41.25	1.17	0.11	0.002	0.115497
SDDSC229	409.82	410.16	0.34	0.75	0.04	0.8456
SDDSC229	410.16	410.68	0.52	0.79	0.012	0.81868
SDDSC229	410.68	411.1	0.42	0.71	0.002	0.715258
SDDSC229	411.1	411.63	0.53	0.9	0.003	0.907648
SDDSC229	411.63	412.16	0.53	0.95	0.005	0.960755
SDDSC229	412.16	412.39	0.23	0.42	0.004	0.429082
SDDSC229	412.39	413.18	0.79	0.12	0.017	0.16063
SDDSC229	413.18	413.4	0.22	1.73	3.11	9.1629
SDDSC229	413.4	414.09	0.69	0.1	0.024	0.15736
SDDSC229	414.09	415.04	0.95	0.08	0.009	0.100315
SDDSC229	417.95	418.97	1.02	0.1	0.006	0.114101
SDDSC229	427.28	427.48	0.2	0.12	0.006	0.134101
SDDSC229	429.75	430.25	0.5	0.08	0.011	0.10629
SDDSC229	430.25	430.45	0.2	1.72	0.48	2.8672
SDDSC229	430.45	430.75	0.3	0.84	0.62	2.3218
SDDSC229	430.75	430.93	0.18	1.1	0.88	3.2032
SDDSC229	430.93	432.03	1.1	0.83	0.57	2.1923
SDDSC229	432.03	432.82	0.79	0.6	0.17	1.0063
SDDSC229	432.82	433.57	0.75	0.41	0.011	0.43629
SDDSC229	433.57	433.91	0.34	0.32	0.009	0.342466
SDDSC229	433.91	434.58	0.67	0.14	0.012	0.16868
SDDSC229	435.82	436.31	0.49	0.11	0.007	0.126969
SDDSC229	436.31	436.94	0.63	0.16	0.006	0.173862
SDDSC229	436.94	437.58	0.64	0.22	0.01	0.242944
SDDSC229	437.58	438.26	0.68	0.11	0.008	0.12912
SDDSC229	439.48	440.02	0.54	0.06	0.018	0.10302
SDDSC229	444.07	444.64	0.57	0.05	0.027	0.11453
SDDSC229	444.64	444.84	0.2	0.23	0.012	0.25868
SDDSC229	444.84	446	1.16	0.09	0.007	0.105535
SDDSC229	446	446.52	0.52	0.16	0.01	0.1839
SDDSC229	446.52	447.38	0.86	0.56	0.026	0.62214
SDDSC229	447.38	448.1	0.72	0.35	0.01	0.3739
SDDSC229	452.53	452.77	0.24	1.12	0.13	1.4307
SDDSC229	452.77	453.2	0.43	0.1	0.006	0.113862
SDDSC229	454.09	455	0.91	0.12	0.005	0.132667
SDDSC229	455.68	455.99	0.31	1.23	0.16	1.6124
SDDSC229	455.99	457	1.01	0.2	0.028	0.26692
SDDSC229	457	458.06	1.06	0.09	0.007	0.106491
SDDSC229	463	464	1	0.04	0.033	0.11887
SDDSC229	464	464.34	0.34	0.45	0.044	0.55516
SDDSC229	464.34	465.24	0.9	0.06	0.06	0.2034
SDDSC229	466.11	466.79	0.68	0.4	0.034	0.48126
SDDSC229	466.79	467.81	1.02	0.16	0.024	0.21736
SDDSC229	467.81	468.51	0.7	0.87	0.034	0.95126
SDDSC229	468.51	469.57	1.06	0.47	0.087	0.67793
SDDSC229	469.57	470.35	0.78	0.21	0.029	0.27931
SDDSC229	470.35	471.42	1.07	0.31	0.056	0.44384
SDDSC229	471.42	471.71	0.29	0.96	0.094	1.18466
SDDSC229	471.71	472.25	0.54	0.32	0.029	0.38931
SDDSC229	472.25	473.03	0.78	0.32	0.086	0.52554
SDDSC229	473.03	473.91	0.88	0.43	0.046	0.53994
SDDSC229	473.91	474.29	0.38	5.18	0.28	5.8492
SDDSC229	474.29	474.8	0.51	0.83	0.21	1.3319
SDDSC229	474.8	475.43	0.63	0.12	0.026	0.18214
SDDSC229	475.43	475.79	0.36	2.04	0.078	2.22642
SDDSC229	475.79	476.27	0.48	0.1	0.017	0.14063
SDDSC229	476.27	477.3	1.03	0.54	0.089	0.75271
SDDSC229	477.3	478.48	1.18	0.12	0.027	0.18453
SDDSC229	479.47	480.17	0.7	0.09	0.006	0.10434
SDDSC229	481	481.89	0.89	0.57	0.26	1.1914
SDDSC229	481.89	482.7	0.81	0.74	0.15	1.0985
SDDSC229	482.7	483.07	0.37	1.31	0.85	3.3415
SDDSC229	483.07	483.24	0.17	34.3	6.34	49.4526
SDDSC229	483.24	483.67	0.43	0.22	0.013	0.25107
SDDSC229	483.67	483.77	0.1	0.76	0.16	1.1424
SDDSC229	483.77	484.27	0.5	0.47	0.12	0.7568
SDDSC229	484.27	484.94	0.67	0.19	0.24	0.7636
SDDSC229	485.69	486.09	0.4	0.19	0.13	0.5007
SDDSC229	488.19	489.03	0.84	0.08	0.036	0.16604
SDDSC229	489.03	489.56	0.53	12.2	0.74	13.9686
SDDSC229	489.56	489.97	0.41	0.81	0.22	1.3358
SDDSC229	489.97	490.76	0.79	2.6	0.094	2.82466
SDDSC229	490.76	491.39	0.63	1.2	0.022	1.25258
SDDSC229	491.39	491.67	0.28	3.69	0.021	3.74019
SDDSC229	491.67	492.35	0.68	6.5	0.021	6.55019
SDDSC229	492.35	492.54	0.19	1.19	2.04	6.0656
SDDSC229	492.54	492.67	0.13	189	0.059	189.141
SDDSC229	492.67	493.1	0.43	0.09	0.066	0.24774
SDDSC229	493.1	493.67	0.57	0.47	0.046	0.57994
SDDSC229	493.67	493.87	0.2	8.04	5.58	21.3762
SDDSC229	493.87	495.12	1.25	0.53	0.019	0.57541
SDDSC229	495.12	495.35	0.23	25.4	13	56.47
SDDSC229	495.35	495.7	0.35	1.35	0.04	1.4456
SDDSC229	495.7	496.7	1	2.59	0.02	2.6378
SDDSC229	496.7	497.99	1.29	0.33	0.034	0.41126
SDDSC229	497.99	498.65	0.66	0.24	0.066	0.39774
SDDSC229	498.65	498.77	0.12	261	0.68	262.6252
SDDSC229	498.77	499.21	0.44	0.54	0.21	1.0419
SDDSC229	499.76	500.64	0.88	0.02	0.047	0.13233
SDDSC229	500.64	501.2	0.56	0.4	0.068	0.56252
SDDSC229	501.2	501.36	0.16	27.9	0.95	30.1705
SDDSC229	501.36	501.97	0.61	2.02	0.033	2.09887
SDDSC229	501.97	502.2	0.23	3.18	0.37	4.0643
SDDSC229	502.2	503.11	0.91	0.29	0.016	0.32824
SDDSC229	503.11	504.17	1.06	0.22	0.01	0.243661
SDDSC229	504.17	504.94	0.77	0.13	0.011	0.15629
SDDSC229	504.94	505.95	1.01	0.43	0.014	0.46346
SDDSC229	505.95	506.88	0.93	0.13	0.015	0.16585
SDDSC229	510.88	511.53	0.65	4.71	1.03	7.1717
SDDSC229	511.53	511.63	0.1	13.8	7.72	32.2508
SDDSC229	512.85	514.13	1.28	0.22	0.15	0.5785
SDDSC229	514.13	514.87	0.74	0.3	0.29	0.9931
SDDSC229	514.87	515.82	0.95	0.2	0.048	0.31472
SDDSC229	515.82	516.78	0.96	0.09	0.015	0.12585
SDDSC229	516.78	518.08	1.3	0.41	0.044	0.51516
SDDSC229	518.08	519.06	0.98	0.27	0.024	0.32736
SDDSC229	519.06	519.19	0.13	6.36	0.065	6.51535
SDDSC229	519.19	519.84	0.65	0.53	0.21	1.0319
SDDSC229	519.84	520.91	1.07	0.16	0.061	0.30579
SDDSC229	520.91	521.7	0.79	0.09	0.062	0.23818
SDDSC229	522.78	523.11	0.33	0.1	0.01	0.123661
SDDSC229	523.11	523.24	0.13	15.9	2.51	21.8989
SDDSC229	523.24	523.35	0.11	48.7	5.93	62.8727
SDDSC229	523.35	523.53	0.18	0.5	0.83	2.4837
SDDSC229	523.53	524.38	0.85	4.11	1.57	7.8623
SDDSC229	524.38	524.49	0.11	31	10.4	55.856
SDDSC229	524.97	526	1.03	0.81	0.56	2.1484
SDDSC229	526	526.65	0.65	0.29	0.18	0.7202
SDDSC229	526.65	526.82	0.17	93.8	19.2	139.688
SDDSC229	526.82	527.48	0.66	7.54	0.44	8.5916
SDDSC229	527.48	527.98	0.5	4.12	1.56	7.8484
SDDSC229	527.98	528.91	0.93	0.52	0.71	2.2169
SDDSC229	528.91	529.23	0.32	0.37	1.04	2.8556
SDDSC229	529.23	529.73	0.5	0.07	0.017	0.11063
SDDSC229	529.73	529.95	0.22	1.31	0.75	3.1025
SDDSC229	529.95	530.57	0.62	0.64	0.45	1.7155
SDDSC229	530.57	531.4	0.83	5.45	0.69	7.0991
SDDSC229	531.4	531.73	0.33	1.14	0.78	3.0042
SDDSC229	531.73	532.8	1.07	0.79	0.071	0.95969
SDDSC229	533.22	534.26	1.04	0.08	0.009	0.101271
SDDSC229	534.26	535.04	0.78	0.09	0.005	0.100994
SDDSC229	535.04	536	0.96	0.1	0.005	0.112428
SDDSC229	537	538	1	0.11	0.008	0.128403
SDDSC229	538	539.04	1.04	0.42	0.019	0.46541
SDDSC236	201.91	203.1	1.19	0.32	0.002	0.324063

 

JORC Table 1

Section 1 Sampling Techniques and Data

Criteria	JORC Code explanation	Commentary
Sampling techniques	Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc.). These examples should not be taken as limiting the broad meaning of sampling. Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used. Aspects of the determination of mineralization that are Material to the Public Report. In cases where 'industry standard' work has been done this would be relatively simple (e.g. 'reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralization types (e.g. submarine nodules) may warrant disclosure of detailed information.	Sampling has been conducted on drill core (half core for >90% and quarter core for check samples), grab samples (field samples of in-situ bedrock and boulders; including duplicate samples), trench samples (rock chips, including duplicates) and soil samples (including duplicate samples). Locations of field samples were obtained by using a GPS, generally to an accuracy of within 5 metres. Drill hole and trench locations have been confirmed to <1 metre using a differential GPS. Samples locations have also been verified by plotting locations on the high-resolution Lidar maps Drill core is marked for cutting and cut using an automated diamond saw used by Company staff in Kilmore. Samples are bagged at the core saw and transported to the Bendigo On Site Laboratory for assay. At On Site samples are crushed using a jaw crusher combined with a rotary splitter and a 1 kg split is separated for pulverizing (LM5) and assay. Standard fire assay techniques are used for gold assay on a 25 g charge by experienced staff (used to dealing with high sulfide and stibnite-rich charges). On Site gold method by fire assay code PE01S. Screen fire assay is used to understand gold grain-size distribution where coarse gold is evident. ICP-OES is used to analyze the aqua regia digested pulp for an additional 12 elements (method BM011) and over-range antimony is measured using flame AAS (method known as B050). Soil samples were sieved in the field and an 80-mesh sample bagged and transported to ALS Global laboratories in Brisbane for super-low level gold analysis on a 50 g samples by method ST44 (using aqua regia and ICP-MS). Grab and rock chip samples are generally submitted to On Site Laboratories for standard fire assay and 12 element ICP-OES as described above.
Drilling techniques	Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc.) and details (e.g. core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc.).	HQ or NQ diameter diamond drill core, oriented using Axis Champ orientation tool with the orientation line marked on the base of the drill core by the driller/offsider. A standard 3 metre core barrel has been found to be most effective in both the hard and soft rocks in the project.
Drill sample recovery	Method of recording and assessing core and chip sample recoveries and results assessed. Measures taken to maximise sample recovery and ensure representative nature of the samples. Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.	Core recoveries were maximised using HQ or NQ diamond drill core with careful control over water pressure to maintain soft-rock integrity and prevent loss of fines from soft drill core. Recoveries are determined on a metre-by-metre basis in the core shed using a tape measure against marked up drill core checking against driller's core blocks. Plots of grade versus recovery and RQD (described below) show no trends relating to loss of drill core, or fines.
Logging	Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc.) photography. The total length and percentage of the relevant intersections logged.	Geotechnical logging of the drill core takes place on racks in the company core shed. Core orientations marked at the drill rig are checked for consistency, and base of core orientation lines are marked on core where two or more orientations match within 10 degrees. Core recoveries are measured for each metre RQD measurements (cumulative quantity of core sticks > 10 cm in a metre) are made on a metre-by-metre basis. Each tray of drill core is photographed (wet and dry) after it is fully marked up for sampling and cutting. The ½ core cutting line is placed approximately 10 degrees above the orientation line so the orientation line is retained in the core tray for future work. Geological logging of drill core includes the following parameters: Rock types, lithology Alteration Structural information (orientations of veins, bedding, fractures using standard alpha-beta measurements from orientation line; or, in the case of un-oriented parts of the core, the alpha angles are measured) Veining (quartz, carbonate, stibnite) Key minerals (visible under hand lens, e.g. gold, stibnite) 100% of drill core is logged for all components described above into the company MX logging database. Logging is fully quantitative, although the description of lithology and alteration relies on visible observations by trained geologists. Logging is considered to be at an appropriate quantitative standard to use in future studies.
Sub-sampling techniques and sample preparation	If core, whether cut or sawn and whether quarter, half or all core taken. If non-core, whether riffled, tube sampled, rotary split, etc. and whether sampled wet or dry. For all sample types, the nature, quality and appropriateness of the sample preparation technique. Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples. Measures taken to ensure that the sampling is representative of the in situ material collected, including for instance results for field duplicate/second-half sampling. Whether sample sizes are appropriate to the grain size of the material being sampled.	Drill core is typically half-core sampled using an Almonte core saw. The drill core orientation line is retained. Quarter and half core is used when taking sampling duplicates (termed FDUP in the database). Sampling representivity is maximised by always taking the same side of the drill core (whenever oriented),and consistently drawing a cut line on the core where orientation is not possible. The field technician draws these lines. Sample sizes are maximised for coarse gold by using half core, and using quarter core and half core splits (laboratory duplicates) allows an estimation of nugget effect. In mineralized rock the company uses approximately 10% of core duplicates, certified reference materials (suitable OREAS materials), laboratory sample duplicates and instrument repeats. In the soil sampling program duplicates were obtained every 25th sample and the laboratory inserted low-level gold standards regularly into the sample flow.
Quality of assay data and laboratory tests	The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. For geophysical tools, spectrometers, handheld XRF instruments, etc., the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision have been established.	The fire assay technique for gold used by On Site is a globally recognised method, and over-range follow-ups including gravimetric finish and screen fire assay are standard. Of significance at the On Site laboratory is the presence of fire assay personnel who are experienced in dealing with high sulfide charges (especially those with high stibnite contents) - this substantially reduces the risk of inaccurate reporting in complex sulfide-gold charges. Where screen fire assay is used, this assay will be reported instead of the original fire assay. The ICP-OES technique is a standard analytical technique for assessing elemental concentrations. The digest used (aqua regia) is excellent for the dissolution of sulfides (in this case generally stibnite, pyrite and trace arsenopyrite), but other silicate-hosted elements, in particular vanadium (V), may only be partially dissolved. These silicate-hosted elements are not important in the determination of the quantity of gold, antimony, arsenic or sulphur. A portable XRF has been used in a qualitative manner on drill core to ensure appropriate core samples have been taken (no pXRF data are reported or included in the MX database). Acceptable levels of accuracy and precision have been established using the following methods ¼ duplicates - half core is split into quarters and given separate sample numbers (commonly in mineralized core) - low to medium gold grades indicate strong correlation, dropping as the gold grade increases over 100 g/t Au. ½ duplicates - core is split into halves and given separate sample numbers (commonly in mineralized core) - low to medium gold grades indicate strong correlation, dropping as the gold grade increases over 100 g/t Au. Washes - washes are inserted post visible gold or >1% visible stibnite to ensure contamination is minimised during the preparation stage Blanks - blanks are inserted after visible gold and in strongly mineralized rocks to confirm that the crushing and pulping are not affected by gold smearing onto the crusher and LM5 swing mill surfaces. Results are excellent, generally below detection limit and a single sample at 0.03 g/t Au. Certified Reference Materials - OREAS CRMs have been used throughout the project including blanks, low (<1 g/t Au), medium (up to 5 g/t Au) and high-grade gold samples (> 5 g/t Au). Results are automatically checked on data import into the MX database to fall within 2 standard deviations of the expected value. Laboratory splits - On Site conducts splits of both coarse crush and pulp duplicates as quality control and reports all data. In particular, high Au samples have the most repeats. Laboratory CRMs - On Site regularly inserts their own CRM materials into the process flow and reports all data Laboratory precision - duplicate measurements of solutions (both Au from fire assay and other elements from the aqua regia digests) are made regularly by the laboratory and reported. Accuracy and precision have been determined carefully by using the sampling and measurement techniques described above during the sampling (accuracy) and laboratory (accuracy and precision) stages of the analysis. Soil sample company duplicates and laboratory certified reference materials all fall within expected ranges.
Verification of sampling and assaying	The verification of significant intersections by either independent or alternative company personnel. The use of twinned holes. Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. Discuss any adjustment to assay data.	The Independent Geologist has visited Sunday Creek drill sites and inspected drill core held at the Kilmore core shed - 11 December 2024 S.Tambanis. The CP & QP, Mr Kenneth Bush has visually inspected the drill core from holes in this release. The drill intersections match both the geological descriptions in the database and the expected assay data (for example, gold and stibnite visible in drill core is matched by high Au and Sb results in assays). In addition, on receipt of results Company geologists assess the gold, antimony and arsenic results to verify that the intersections returned expected data. The electronic data storage in the MX database is of a high standard. Primary logging data are entered directly by the geologists and field technicians and the assay data are electronically matched against sample number on return from the laboratory. Certified reference materials, ¼ core field duplicates (FDUP), laboratory splits and duplicates and instrument repeats are all recorded in the database. Exports of data include all primary data, from hole SDDSC077B onwards after discussion with SRK Consulting. Prior to this gold was averaged across primary, field and lab duplicates. Adjustments to assay data are recorded by MX, and none are present (or required). Twinned drill holes are not available at this stage of the project.
Location of data points	Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. Specification of the grid system used. Quality and adequacy of topographic control.	Differential GPS used to locate drill collars, trenches and some workings Standard GPS for some field locations (grab and soils samples), verified against Lidar data. Downhole surveys are collected by either electronic single-shot, REFLEX EZ-TRAC multi-shot or Imdex/Axis north-seeking gyro or a combination. During drilling, surveys are completed at a maximum of 30 m intervals, with multi-shot surveys completed at hole completion or upon request by geologists at 3m intervals during drilling unless ground conditions are unsuitable. The grid system used throughout is Geocentric datum of Australia 1994; Map Grid Zone 55 (GDA94_Z55), also referred to as ELSG 28355. Reported azimuths also relate to MGA55 (GDA94_Z55). Topographic control is excellent owing to sub 10 cm accuracy from Lidar data.
Data spacing and distribution	Data spacing for reporting of Exploration Results. Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. Whether sample compositing has been applied.	The data spacing is suitable for reporting of exploration results - evidence for this is based on the improving predictability of high-grade gold-antimony intersections. At this time, the data spacing and distribution are not sufficient for the reporting of Mineral Resource Estimates. This however may change as knowledge of grade controls increase with future drill programs. Samples have been composited to a 1 g/t AuEq over 2.0 m width for lower grades and 5 g/t AuEq over 1.0 m width for higher grades in table 3. All individual assays above 0.1 g/t AuEq have been reported to two decimal places with no compositing in table 4.
Orientation of data in relation to geological structure	Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. If the relationship between the drilling orientation and the orientation of key mineralized structures is considered to have introduced a sampling bias, this should be assessed and reported if material.	The true thickness of the mineralized intervals reported are interpreted to be approximately 60-85% of the sampled thickness. Drilling is oriented in an optimum direction when considering the combination of host rock orientation and apparent vein control on gold and antimony grade. The steep nature of some of the veins may give increases in apparent thickness of some intersections, but more drilling is required to quantify. A sampling bias is not evident from the data collected to date (drill holes cut across mineralized structures at a moderate angle).
Sample security	The measures taken to ensure sample security.	Drill core is delivered to the Kilmore core logging shed by either the drill contractor or company field staff. Samples are marked up and cut by company staff at the Kilmore core shed, in an automated diamond saw and bagged before loaded onto strapped secured pallets and trucked by company staff to Bendigo for submission to the laboratory. There is no evidence in any stage of the process, or in the data for any sample security issues.
Audits or reviews	The results of any audits or reviews of sampling techniques and data.	Continuous monitoring of CRM results, blanks and duplicates is undertaken by geologists and the company data geologist. Mr Kenneth Bush for SXG has the orientation, logging and assay data.

 

Section 2 Reporting of Exploration Results

Criteria	JORC Code explanation	Commentary
Mineral tenement and land tenure status	Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area.	The Sunday Creek Project, previously known as the Clonbinane Project, is covered by the Retention Licence RL 6040 and is surrounded by Exploration Licence EL6163 and Exploration Licence EL7232. All the licences are 100% held by Clonbinane Goldfield Pty Ltd, a wholly owned subsidiary company of Southern Cross Gold Ltd.
Exploration done by other parties	Acknowledgment and appraisal of exploration by other parties.	The Sunday Creek project is a high level orogenic (or epizonal) Fosterville-style deposit. Small scale mining has been undertaken in the project area since the 1880s continuing through to the early 1900s. Historical production occurred with multiple small shafts and alluvial workings across the Clonbinane Goldfield permits. Production of note occurred at the Clonbinane area with total production being reported as 41,000 oz gold at a grade of 33 g/t gold (Leggo and Holdsworth, 2013) Work in and nearby to the Sunday Creek Project area by previous explorers typically focused on finding bulk, shallow deposits. Beadell Resources were the first to drill deeper targets and Southern Cross have continued their work in the Sunday Creek Project area. EL54 - Eastern Prospectors Pty Ltd Rock chip sampling around Christina, Apollo and Golden Dyke mines. Rock chip sampling down the Christina mine shaft. Resistivity survey over the Golden Dyke. Five diamond drill holes around Christina, two of which have assays. ELs 872 & 975 - CRA Exploration Pty Ltd Exploration focused on finding low grade, high tonnage deposits. The tenements were relinquished after the area was found to be prospective but not economic. Stream sediment samples around the Golden Dyke and Reedy Creek areas. Results were better around the Golden Dyke. 45 dump samples around Golden Dyke old workings showed good correlation between gold, arsenic and antimony. Soil samples over the Golden Dyke to define boundaries of dyke and mineralization. Two costeans parallel to the Golden Dyke targeting soil anomalies. Costeans since rehabilitated by SXG. ELs 827 & 1520 - BHP Minerals Ltd Exploration targeting open cut gold mineralization peripheral to SXG tenements. ELs 1534, 1603 & 3129 - Ausminde Holdings Pty Ltd Targeting shallow, low grade gold. Trenching around the Golden Dyke prospect and results interpreted along with CRAs costeans. 29 RC/Aircore holes totalling 959 m sunk into the Apollo, Rising Sun and Golden Dyke target areas. ELs 4460 & 4987 - Beadell Resources Ltd ELs 4460 and 4497 were granted to Beadell Resources in November 2007. Beadell successfully drilled 30 RC holes, including second diamond tail holes in the Golden Dyke/Apollo target areas. Both tenements were 100% acquired by Auminco Goldfields Pty Ltd in late 2012 and combined into one tenement EL4987. Nagambie Resources Ltd purchased Auminco Goldfields in July 2014. EL4987 expired late 2015, during which time Nagambie Resources applied for a retention licence (RL6040) covering three square kilometres over the Sunday Creek Project. RL6040 was granted July 2017. Clonbinane Goldfield Pty Ltd was purchased by Mawson Gold Ltd in February 2020. Mawson drilled 30 holes for 6,928 m and made the first discoveries to depth.
Geology	Deposit type, geological setting and style of mineralization.	Refer to the description in the main body of the release.
Drill hole Information	A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: easting and northing of the drill hole collar elevation or RL (Reduced Level - elevation above sea level in metres) of the drill hole collar dip and azimuth of the hole down hole length and interception depth hole length. If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.	Refer to appendices
Data aggregation methods	In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (e.g. cutting of high-grades) and cut-off grades are usually Material and should be stated. Where aggregate intercepts incorporate short lengths of high-grade results and longer lengths of low-grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. The assumptions used for any reporting of metal equivalent values should be clearly stated.	See "Further Information" and "Metal Equivalent Calculation" in main text of press release.
Relationship between mineralization widths and intercept lengths	These relationships are particularly important in the reporting of Exploration Results. If the geometry of the mineralization with respect to the drill hole angle is known, its nature should be reported. If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (e.g 'down hole length, true width not known').	See reporting of true widths in the body of the press release.
Diagrams	Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported. These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.	The results of the diamond drilling are displayed in the figures in the announcement.
Balanced reporting	Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high-grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.	All results above 0.1 g/t Au have been tabulated in this announcement. The results are considered representative with no intended bias. Core loss, where material, is disclosed in tabulated drill intersections.
Other substantive exploration data	Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.	Preliminary testing was reported in January 11, 2024. This established the general metallurgical test procedure for samples from the Sunday Creek deposits and demonstrated the basis for confidence in establishing prospects for economic recovery of contained gold and antimony to three separate products: Metallic gold product by gravity recovery Antimony-gold flotation concentrate Pyrite-arsenopyrite-gold flotation concentrate Testing has now been expanded to include samples from additional zones of the mineral deposits and to refine metallurgical processes. The aim was to improve aspects of antimony concentrate production, maximise gold recovery to a high-grade metallic product, and to further investigate the nature of gold occurrence. The work, conducted by ALS Burnie Laboratories, focused on: Improving selectivity between sulphide minerals in the antimony flotation stage whilst maintaining high overall gold recovery. Further processing of the flotation concentrates, to assess the metallurgical response of contained gold. Mineralogical examination of selected product samples. It was demonstrated that, with appropriate process conditions, high antimony and gold recovery could be maintained whilst rejecting arsenic and iron sulphides in the first flotation stage. The antimony concentrate produced (~50% Sb, <0.2% As) is deemed to be attractive to the smelter market. Recovery of antimony to concentrate varied with feed type, and ranged from 83% to 93% for the samples tested from the antimony rich zones. Additional metallic gold was recovered from the flotation concentrate by gravity separation. The gold grade of the concentrate is a function of the proportion of feed gold associated with arsenic-iron sulphides, the ratio of gold to antimony in the feed, the gold recovered to the metallic gold product, and the flotation rate of gold in the first flotation stage. High overall gold recovery was achieved with all samples tested. Further Work Additional characterization testing across deposit zones Locked cycle testing to confirm overall recoveries Multi-stage cleaning optimization to maximize concentrate quality Pilot plant evaluation of larger samples Process plant design studies targeting Q1 2027 completion
Further work	The nature and scale of planned further work (e.g. tests for lateral extensions or depth extensions or large-scale step-out drilling). Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.	The Company has stated it will drill 200,000 m through 2025 to Q1 2027. See diagrams in presentation which highlight current and future drill plans.

 

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/317813

FAQ

AI-generated questions and answers. How Rhea-AI works. Not financial advice.

What were Southern Cross Gold's main Golden Dyke drilling results?

The main gold intervals were 2.7 m at 178.4 g/t in SDDSC225, 6.8 m at 49.8 g/t in SDDSC218 and 1.0 m at 198.9 g/t in SDDSC221. They began at down-hole depths of 662.3 m, 537.9 m and 680.0 m, respectively.

How far did Southern Cross Gold's drilling extend Golden Dyke?

SDDSC218 and SDDSC221 identified four vein sets outside the current Exploration Target, extending Golden Dyke 30 m to 50 m west toward Christina. SDDSC218 intersected one newly recognized vein set, while SDDSC221 intersected three.

How closely spaced was Southern Cross Gold's Golden Dyke infill drilling?

Infill drilling reduced spacing within the tested block from approximately 50 m to approximately 30 m along strike by 15 m to 20 m laterally. The five holes tested a continuous block roughly 300 m by 500 m, between 280 m and 750 m below surface.

Has Southern Cross Gold drilled beneath SDDSC225's GD40 gold intersection?

No drilling has yet tested beneath that intersection. The 2.7 m interval at 178.4 g/t gold is the deepest intercept on the GD40 vein set and ranks as Sunday Creek's 13th best composite intersection to date.

Where did Southern Cross Gold find the highest antimony assay in the Golden Dyke results?

SDDSC218 returned 53.50% antimony with 20.8 g/t gold over 0.35 m from 496.30 m down hole. Three individual assays in that hole exceeded 20% antimony between 472 m and 497 m down hole. Antimony is richest in the upper part of the tested block, while gold dominates at depth.