TechPrecision Corporation Reports Fiscal Year 2027 First Quarter Financial Results
Rhea-AI Summary
TechPrecision (NASDAQ:TPCS) reported fiscal 2027 first quarter revenue of $9.1 million, up 23% year over year, driven by favorable customer and project mix at both Ranor and Stadco. Consolidated gross profit rose 36% to $1.4 million, while SG&A fell 3%.
Operating loss narrowed to $45,000 from $463,000, and net loss improved to $153,000 (loss of $0.02 per share) from $597,000. EBITDA increased to $651,000 from $239,000. Funded backlog reached $52.7 million with about $22 million of additional unfunded purchase orders, expected to be delivered over one to three fiscal years.
At June 30, 2026, cash was $0.3 million, total debt $5.0 million and working capital was slightly negative due to classifying all debt as current after covenant breaches. TechPrecision reiterated fiscal 2027 guidance for revenue of $35–37 million (about 10% growth) and EBITDA of $3–4 million (about 80% growth).
Positive
- Revenue up 23% to $9.1M in fiscal 2027 Q1
- Gross profit up 36% to $1.4M with stable 15% margin
- Net loss narrowed to $0.2M from $0.6M year over year
- EBITDA rose to $0.65M from $0.24M in prior-year quarter
- Funded backlog $52.7M plus ~$22M unfunded purchase orders
- Total debt reduced to $5.0M from $7.0M since March 31, 2026
Negative
- Company still reported a net loss of $0.2M in Q1
- Cash balance low at $0.3M as of June 30, 2026
- Working capital negative $46K due to covenant-related debt reclassification
- Ranor gross margin declined to 17% from 20% year over year
Market reaction after 1Q27 earnings report: TPCS +4.55%
Following this news, TPCS has gained 4.55%, reflecting a moderate positive market reaction. Argus tracked a peak move of +18.2% during the session. Our momentum scanner has triggered 10 alerts so far, indicating notable trading interest and price volatility. The stock is currently trading at $5.06. Trading volume is elevated at 2.1x the average, suggesting notable buying interest.
Data tracked by StockTitan Argus (15 min delayed). Upgrade to Gold for real-time data.
Key Figures
Previous Earnings Reports
| Date | Event | Sentiment | 24h Move | Catalyst |
|---|---|---|---|---|
| Jun 22 | Fourth-quarter earnings | Positive | +9.8% | Improved profitability and fiscal 2027 revenue and EBITDA guidance |
| Feb 17 | Third-quarter earnings | Negative | -9.0% | Lower revenue and wider quarterly net loss amid liquidity concerns |
| Nov 13 | Second-quarter earnings | Positive | +5.4% | Higher gross profit, improved margin, and quarterly net income |
| Aug 21 | First-quarter earnings | Negative | -5.4% | Revenue decline, negative working capital, debt, and covenant violations |
| Jul 29 | Fourth-quarter earnings | Positive | +9.1% | Revenue growth and quarterly net income despite annual net loss |
24h Move is the share-price change in the day after each event; other market factors may also have contributed.
Across five tag-matched earnings events, positive or negative announcements aligned with same-direction 24-hour reactions, while the average move was 1.95%.
Key Terms
ebitda financial
non-gaap financial measure financial
covenant violations financial
itar regulatory
AI-generated analysis. How Rhea-AI works. Not financial advice.
Consolidated Revenue and Gross Profit increased by
WESTMINSTER, MA / ACCESS Newswire / August 13, 2026 / TechPrecision Corporation (NASDAQ:TPCS) ("TechPrecision" or "the Company"), a custom manufacturer of precision, large-scale fabrication components and precision, large-scale machined metal structural components, today reported financial results for the first quarter of fiscal year 2027, or three months ended June 30, 2026. The components that we manufacture are customer designed and sold to customers in the defense and precision industrial markets. We have two wholly owned subsidiaries that are each reportable segments, Ranor and Stadco.
Management will host a conference call on Thursday, August 13, 2026, at 4.30 p.m. ET, to discuss our financial results for the first quarter of fiscal year 2027.
"For the first quarter of fiscal year 2027 the Company reported consolidated revenue of
"As a result of the favorable customer and project mix at both segments, our net loss decreased by
"Customer confidence remains high with our funded backlog reaching
"For the remainder of fiscal 2027, the Company remains on track to deliver double-digit revenue growth and resulting EBITDA as we continue to execute on the strategic customer and project mix plan," stated Alexander Shen, TechPrecision's Chief Executive Officer. The Company is holding to its FY 2027 guidance of Revenue growth of +
The following summary compares the three months ended June 30, 2026 to the same prior year period:
Consolidated Financial Results - Three Months Ended June 30, 2026
Revenue was
$9.1 million , a23% increase on a favorable customer and project mix at both segments.Cost of revenue was
$7.7 million , or a21% increase in line with segment revenue growth.Gross profit was
$1.4 million , an increase of36% primarily on higher revenue at both segments.SG&A decreased by
3% primarily on a decrease in professional fees and office costs.Operating loss was
$45,000 , a90% improvement due primarily to the higher margin drop-through.Interest expense decreased
21% , due to lower interest costs incurred on loans.Net loss was
$0.2 million , compared with net loss of$0.6 million in the same period a year ago.
Financial Position
On June 30, 2026, and March 31, 2026, the Company had approximately
Conference Call
The Company will hold a conference call at 4:30 p.m. Eastern (U.S.) time on Thursday, August 13, 2026. To participate in the live conference call, please dial 1-888-506-0062 five to 10 minutes prior to the scheduled conference call time. International callers should dial 1-973-528-0011. When prompted, reference TechPrecision and enter code 723051.
A replay will be available until August 27, 2026. To access the replay, dial 1-877-481-4010 or 1-919-882-2331. When prompted, enter Conference Passcode 54397.
The call will also be available over the Internet and accessible at: https://www.webcaster5.com/Webcast/Page/2198/54397.
About TechPrecision Corporation
TechPrecision Corporation, through its wholly owned subsidiaries, Ranor, Inc. and Stadco, is a custom manufacturer of precision, large-scale fabrication components and precision, large-scale machined metal structural components. The manufacturing operations of our Ranor subsidiary are situated on approximately 65 acres in North Central Massachusetts. Leveraging our 145,000 square foot facilities, Ranor provides a full range of custom solutions to transform material into precision finished welded components and precision finished machined components up to 100 tons: manufacturing engineering, materials management and traceability, high-precision heavy fabrication (in-house fabrication operations include cutting, press and roll forming, welding, heat treating, assembly, blasting and painting), heavy high-precision machining (in-house machining operations include CNC programming, finishing, and assembly), QC inspection including portable CMM, NonDestructive Testing, and final packaging.
All manufacturing at Ranor is performed in accordance with customer requirements. Ranor is an ISO 9001:2015 certificate holder. Ranor is a US defense-centric company with over
The manufacturing operations of our Stadco subsidiary are situated in an industrial self-contained multi-building complex comprised of approximately 183,000 square feet under roof in Los Angeles, California. Stadco manufactures large mission-critical components on several high-profile military aircraft, military helicopter, and military space programs. Stadco has been a critical supplier to a blue-chip customer base that includes some of the largest OEMs and prime contractors in the defense and aerospace industries. Stadco also manufactures tooling, molds, fixtures, jigs and dies used in the production of defense-centric aircraft components.
Our Stadco subsidiary, similar to Ranor, provides a full range of custom solutions: manufacturing engineering, materials management and traceability, high-precision fabrication (in-house fabrication operations include waterjet cutting, press forming, welding, and assembly) and high-precision machining (in-house machining operations include CNC programming, finishing, and assembly), QC inspection including both fixed and portable CMM NonDestructive Testing, and final packaging. In addition, Stadco features a large electron beam welding cell, and two NonDestructive Testing work cells, a unique mission-critical technology set.
All manufacturing at Stadco is performed in accordance with customer requirements. Stadco is an AS 9100 D and ISO 9001:2015 certificate holder and a NADCAP NonDestructive Testing certificate holder. Stadco is a US defense-centric company with over
To learn more about the Company, please visit the corporate website at http://www.techprecision.com. Information on the Company's website or any other website does not constitute a part of this press release.
Safe Harbor Statement
This release contains certain "forward-looking statements" relating to the business of the Company and its subsidiary companies. All statements other than statements of current or historical fact contained in this press release, including statements that express our intentions, plans, objectives, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions are forward-looking statements. The words "anticipate," "believe," "continue," "could," "estimate," "expect," "intend," "may," "plan," "predict," "project," "prospects," "will," "should," "would" and similar expressions, as they relate to us, are intended to identify forward-looking statements. These statements are based on current expectations, estimates and projections made by management about our business, our industry and other conditions affecting our financial condition, results of operations or business prospects. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may differ materially from what is expressed or forecasted in, or implied by, the forward-looking statements due to numerous risks and uncertainties. Factors that could cause such outcomes and results to differ include, but are not limited to, risks and uncertainties arising from: our reliance on individual purchase orders, rather than long-term contracts, to generate revenue; our ability to balance the composition of our revenues and effectively control operating expenses; external factors that may be outside our control, including health emergencies, like epidemics or pandemics, geopolitical conflicts, price inflation, interest rate increases and supply chain disruptions; the availability of appropriate financing facilities impacting our operations, financial condition and/or liquidity; our ability to receive contract awards through competitive bidding processes; our ability to maintain standards to enable us to manufacture products to exacting specifications; our ability to enter new markets for our services; our reliance on a small number of customers for a significant percentage of our business; competitive pressures in the markets we serve; changes in the availability or cost of raw materials and energy for our production facilities; restrictions in our ability to operate our business due to our outstanding indebtedness; government tariffs, regulations and requirements; pricing and business development difficulties; changes in government spending on national defense; our ability to make acquisitions and successfully integrate those acquisitions with our business; our failure to maintain effective internal controls over financial reporting; general industry and market conditions and growth rates; and other risks discussed in the Company's periodic reports that are filed with the Securities and Exchange Commission and available on its website (www.sec.gov). Any forward-looking statements speak only as of the date on which they are made, and we undertake no obligation to publicly update or revise any forward-looking statements to reflect events or circumstances that may arise after the date of this press release, except as required by applicable law. Investors should evaluate any statements made by us in light of these important factors.
Company Contact: | Investor Relations Contact: |
TECHPRECISION CORPORATION
CONDENSED CONSOLIDATED BALANCE SHEETS
(Unaudited) June 30, | March 31, | |||||||
(dollars in thousands, except share and per share data) | 2026 | 2026 | ||||||
ASSETS | ||||||||
Current assets: | ||||||||
Cash | $ | 279 | $ | 431 | ||||
Accounts receivable | 3,073 | 2,488 | ||||||
Contract assets | 10,400 | 10,808 | ||||||
Raw materials | 2,025 | 1,927 | ||||||
Work-in-process | 1,155 | 1,027 | ||||||
Other current assets | 396 | 1,045 | ||||||
Total current assets | 17,328 | 17,726 | ||||||
Property, plant and equipment, net | 10,382 | 10,874 | ||||||
Right of use asset, net | 3,407 | 3,550 | ||||||
Other noncurrent assets | 122 | 122 | ||||||
Total assets | $ | 31,239 | $ | 32,272 | ||||
LIABILITIES AND STOCKHOLDERS' EQUITY: | ||||||||
Current liabilities: | ||||||||
Accounts payable | $ | 3,452 | $ | 2,415 | ||||
Accrued expenses | 4,022 | 3,868 | ||||||
Income taxes payable | 31 | 31 | ||||||
Contract liabilities | 2,935 | 2,917 | ||||||
Customer deposits | 1,252 | 1,252 | ||||||
Current portion of long-term lease liability | 817 | 800 | ||||||
Current portion of long-term debt, net | 4,865 | 6,884 | ||||||
Total current liabilities | 17,374 | 18,167 | ||||||
Long-term lease liability | 2,697 | 2,864 | ||||||
Other noncurrent liability | 3,556 | 3,568 | ||||||
Total liabilities | 23,627 | 24,599 | ||||||
Stockholders' Equity: | ||||||||
Common stock - par value $.0001 per share, 50,000,000 shares authorized: Shares issued and outstanding: June 30, 2026 - 10,133,261 and 10,100,311; March 31, 2026 - 10,078,381 and 10,024,469, respectively. | 1 | 1 | ||||||
Additional paid in capital | 19,574 | 19,482 | ||||||
Accumulated deficit | (11,963 | ) | (11,810 | ) | ||||
Total stockholders' equity | 7,612 | 7,673 | ||||||
Total liabilities and stockholders' equity | $ | 31,239 | $ | 32,272 | ||||
TECHPRECISION CORPORATION
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(unaudited)
Three months ended June 30, | ||||||||
(dollars in thousands, except share and per share data) | 2026 | 2025 | ||||||
Revenue | $ | 9,096 | $ | 7,379 | ||||
Cost of revenue | 7,696 | 6,349 | ||||||
Gross profit | 1,400 | 1,030 | ||||||
Selling, general and administrative | 1,445 | 1,493 | ||||||
Loss from operations | (45 | ) | (463 | ) | ||||
Other (expense) income | (2 | ) | 1 | |||||
Interest expense | (106 | ) | (135 | ) | ||||
Total other expense, net | (108 | ) | (134 | ) | ||||
Loss before income taxes | (153 | ) | (597 | ) | ||||
Income tax expense (benefit) | --- | --- | ||||||
Net loss | $ | (153 | ) | $ | (597 | ) | ||
Net loss per share - basic and diluted | $ | (0.02 | ) | $ | (0.06 | ) | ||
Weighted average number of shares outstanding - basic and diluted | 10,100,311 | 9,757,846 | ||||||
TECHPRECISION CORPORATION
REVENUE, COST OF REVENUE, GROSS PROFIT BY SEGMENT
(Unaudited)
June 30, 2026 | June 30, 2025 | Changes | ||||||||||||||||||||||
| Percent |
| Percent |
|
| |||||||||||||||||||
(dollars in thousands) | Amount | Revenue | Amount | Revenue | Amount | Percent | ||||||||||||||||||
Revenue |
|
|
|
|
|
| ||||||||||||||||||
Ranor | $ | 5,461 | 60 | % | $ | 4,297 | 58 | % | $ | 1,164 | 27 | % | ||||||||||||
Stadco | 4,064 | 45 | % | 3,332 | 45 | % | 732 | 22 | % | |||||||||||||||
Intersegment elimination | (429 | ) | (5 | )% | (250 | ) | (3 | )% | (179 | ) | (72 | )% | ||||||||||||
Consolidated Revenue | $ | 9,096 | 100 | % | $ | 7,379 | 100 | % | $ | 1,717 | 23 | % | ||||||||||||
Cost of revenue | ||||||||||||||||||||||||
Ranor | $ | 4,315 | 48 | % | $ | 2,804 | 39 | % | $ | 1,511 | 54 | % | ||||||||||||
Stadco | 3,795 | 42 | % | 3,795 | 52 | % | --- | --- | % | |||||||||||||||
Intersegment elimination | (414 | ) | (4 | )% | (250 | ) | (5 | )% | (164 | ) | (66 | )% | ||||||||||||
Consolidated Cost of revenue | $ | 7,696 | 86 | % | $ | 6,349 | 86 | % | $ | 1,347 | 21 | % | ||||||||||||
Gross profit (loss)1 | ||||||||||||||||||||||||
Ranor | $ | 1,560 | 17 | % | $ | 1,493 | 20 | % | $ | 67 | 4 | % | ||||||||||||
Stadco | (160 | ) | (2 | )% | (463 | ) | (6 | )% | 303 | 65 | % | |||||||||||||
Consolidated Gross profit | $ | 1,400 | 15 | % | $ | 1,030 | 14 | % | $ | 370 | 36 | % | ||||||||||||
1Net of intersegment eliminations
TECHPRECISION CORPORATION
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(Unaudited)
Three Months Ended June 30, | ||||||||
(in thousands) | 2026 | 2025 | ||||||
CASH FLOWS FROM OPERATING ACTIVITIES: | ||||||||
Net loss | $ | (153 | ) | $ | (597 | ) | ||
Adjustments to reconcile net loss to net cash provided by operating activities: | ||||||||
Depreciation and amortization | 698 | 701 | ||||||
Amortization of debt issue costs | 14 | 29 | ||||||
Stock based compensation expense | 92 | 69 | ||||||
Change in contract loss provision | 178 | (250 | ) | |||||
Loss on disposal of fixed assets | 2 | --- | ||||||
Changes in operating assets and liabilities: | ||||||||
Accounts receivable | (585 | ) | (602 | ) | ||||
Contract assets | 408 | 510 | ||||||
Work-in-process and raw materials | (226 | ) | (337 | ) | ||||
Other current assets | 649 | 85 | ||||||
Accounts payable | 1,037 | 178 | ||||||
Accrued expenses | (222 | ) | 67 | |||||
Contract liabilities | 18 | 922 | ||||||
Other noncurrent liabilities | (12 | ) | (129 | ) | ||||
Net cash provided by operating activities | 1,898 | 646 | ||||||
CASH FLOWS FROM INVESTING ACTIVITIES: | ||||||||
Purchases of property, plant, and equipment | (2,436 | ) | (1,250 | ) | ||||
Reimbursements for purchases of property, plant and equipment | 2,420 | 2,226 | ||||||
Net cash (used in) provided by investing activities | (16 | ) | 976 | |||||
CASH FLOWS FROM FINANCING ACTIVITIES: | ||||||||
Debt issue costs | (13 | ) | (17 | ) | ||||
Revolver loan borrowings | 6,553 | 2,755 | ||||||
Revolver loan payments | (8,400 | ) | (4,241 | ) | ||||
Payments of principal for leases | (1 | ) | (2 | ) | ||||
Repayments of long-term debt | (173 | ) | (169 | ) | ||||
Net cash used in financing activities | (2,034 | ) | (1,674 | ) | ||||
Net decrease in cash | (152 | ) | (52 | ) | ||||
Cash - beginning of period | 431 | 195 | ||||||
Cash - end of period | $ | 279 | $ | 143 | ||||
EBITDA Non-GAAP Financial Measure
Three Months ended June 30, | ||||||||||||
(dollars in thousands) | 2026 | 2025 | Change | |||||||||
Net loss | $ | (153 | ) | $ | (597 | ) | $ | 444 | ||||
Interest expense (1) | 106 | 135 | (29 | ) | ||||||||
Depreciation and amortization | 698 | 701 | (3 | ) | ||||||||
EBITDA | $ | 651 | $ | 239 | $ | 412 | ||||||
1Includes amortization of debt issue costs
SOURCE: TechPrecision Corporation
View the original press release on ACCESS Newswire