ZJK Launches Next-Generation Cold Forging Dies, Empowering AI and High-End Industrial Applications

ZJK (NASDAQ: ZJK) launched next-generation cold forging dies for chamfered screws, targeting AI servers, industrial robotics, EVs and other high-end manufacturing.

Rhea-AI Summary

ZJK (NASDAQ: ZJK) launched next-generation cold forging dies for chamfered screws, targeting AI servers, industrial robotics, EVs and other high-end manufacturing. The dies integrate chamfering into forging to boost efficiency, cut costs and enhance precision.

According to ZJK, internal assessments show 30%–50% higher production efficiency, over 40% lower equipment investment per line, and length tolerance within 0.10mm. ZJK reported 2025 revenue of US$56.10 million, up about 48.39% from 2024, supported by demand for high-precision components.

Positive

• 2025 revenue rose about 48.39% to US$56.10 million from US$37.81 million
• Internal assessments show 30%–50% production efficiency gains versus traditional chamfering processes
• Total equipment investment per production line reduced by over 40% versus conventional setups
• Length tolerance controlled within 0.10mm, about half that of conventional processes
• Internal tests indicate smoother screw surfaces, less material stress and improved corrosion resistance

Negative

• None.

Argus May 13 session

+1.45% close to close Open Argus

Details

News Market Reaction – ZJK

In the May 13 session, ZJK gained 1.45%, reflecting a mild positive market reaction.

Data tracked by StockTitan Argus on the day of publication.

Market Context

This announcement underscores ZJK’s focus on precision components for AI infrastructure and intellig...

Analysis

This announcement underscores ZJK’s focus on precision components for AI infrastructure and intelligent manufacturing. The new cold forging dies target 30%–50% higher efficiency, over 40% lower equipment investment, and tighter 0.10 mm tolerances, complementing 2025 revenue of US$56.10M, up 48.39% year over year. In context with prior AI-oriented tooling advances and an effective $300,000,000 shelf, investors may monitor execution on AI server, robotics and EV opportunities alongside capital-raising activity.

Key Figures

2025 Revenue: US$56.10 million 2024 Revenue: US$37.81 million Revenue Growth: 48.39% +5 more

2025 Revenue

US$56.10 million

Year ended December 31, 2025

2024 Revenue

US$37.81 million

Year ended December 31, 2024

Revenue Growth

48.39%

2025 vs 2024

Efficiency Gain

30%–50%

Production efficiency increase vs traditional chamfering

Equipment Investment Cut

40%+ reduction

Total equipment investment per production line

Length Tolerance

0.10 mm

Controlled tolerance in new process

Short Interest

0.46%

Short interest as share of float

Public Float

$33,477,215

Class A shares held by non‑affiliates as of March 20, 2026 (F-3/A)

Previous AI Reports

1 past event · Latest: Aug 20

Same Type 1 event

1. Aug 20

   AI tooling upgrade

   24h Move

   -3.2%

   Patented six-flap eccentric chuck to enhance AI server and robotics machining.

24h Move is the share-price change in the day after each event; other market factors may also have contributed.

Key Terms

cold forging, chamfered screws, chamfering process, ai servers, +4 more

8 terms

cold forging technical

"The new dies enable the direct production of semi-finished products with built-in chamfers..."

Cold forging is a metal shaping technique where solid metal is squeezed into a die at or near room temperature using very high pressure, producing finished parts with tight dimensions and a smooth surface—like pressing clay into a mold but without heating. For investors it matters because cold forging often reduces material waste, speeds production, and strengthens parts through deformation, which can lower unit costs, improve product quality, and influence a company's margins and manufacturing capacity.

chamfered screws technical

"...launch of its next-generation cold forging dies for chamfered screws."

Chamfered screws are fasteners whose heads or tips have a slanted, beveled edge so they sit flush or guide smoothly into a matching hole, like a key that’s slightly tapered to fit easily into a lock. For investors, this matters because the choice and availability of such standard parts affect manufacturing efficiency, product fit and finish, assembly costs, and supplier compatibility—factors that can influence production speed, warranty claims, and margins.

chamfering process technical

"...thereby restructuring the traditional chamfering process and achieving simultaneous improvements..."

Chamfering process is the manufacturing step that cuts or grinds off a sharp corner or edge of a part to create a small, angled surface instead of a 90-degree corner. Like trimming the edge off a picture frame so it sits flush and won’t snag, chamfering improves how parts fit together, reduces wear, and lowers risk of damage or injury. For investors, consistent chamfering affects product quality, assembly speed, warranty costs and regulatory or safety compliance, all of which can influence production costs and margins.

ai servers technical

"The solution is designed for AI servers, industrial robotics, automated assembly..."

AI servers are computer systems built specifically to run artificial intelligence models and large data processing tasks, using fast processors, extra memory and special chips to handle heavy calculations. Think of them as industrial ovens compared with a home stove: they cook complex AI workloads far faster and more efficiently. Investors care because demand for AI servers drives hardware sales, cloud revenue and capital spending, and it influences companies’ growth, profit margins and competitive position.

industrial robotics technical

"The solution is designed for AI servers, industrial robotics, automated assembly..."

Industrial robotics are automated machines and robotic arms used in factories and warehouses to perform repetitive or precise tasks such as assembling, welding, painting, inspecting, and moving goods. They matter to investors because they can raise productivity, lower labor costs and errors, and shorten production time—like adding a reliable, high‑speed tool to a production line—so companies that adopt or sell these systems can change margins, capital needs and growth prospects.

visual inspection lines technical

"...enable seamless integration with robotic tightening systems, visual inspection lines..."

Visual inspection lines are the visible markings that appear on rapid diagnostic tests (like lateral-flow strips) to show a control result and any indication of a positive or negative finding. For investors, these lines matter because they determine how easy and reliable the test is for users, affect regulatory approval and market acceptance, and can signal manufacturing quality or potential liability if results are misread—think of them as the test’s traffic lights.

robotic tightening systems technical

"ZJK’s new dies will ensure structural and chamfer consistency at the source, and to enable seamless integration with robotic tightening systems..."

Robotic tightening systems are automated machines that fasten screws, bolts and other connectors to precise settings, like a robotic wrench that repeats the same exact turn every time. They matter to investors because they increase production speed, reduce assembly errors and warranty costs, and lower labor needs—factors that can improve profit margins, product quality and scalability while requiring upfront capital and ongoing maintenance.

ai infrastructure technical

"...serving artificial intelligence (AI) infrastructure, consumer electronics, electric vehicles..."

AI infrastructure consists of the hardware, software, and systems needed to develop, run, and support artificial intelligence applications. Think of it as the foundation and tools that enable AI to process large amounts of data quickly and accurately, similar to how a strong foundation supports a building. For investors, AI infrastructure is important because it underpins advancements in technology that can drive new business opportunities and competitive advantages.

AI-generated analysis. How Rhea-AI works. Not financial advice.

See more from StockTitan in Google Search and AI answers. Adds StockTitan as a preferred source · opens Google

Add on Google Not now

SHENZHEN, China, May 13, 2026 (GLOBE NEWSWIRE) -- ZJK Industrial Co., Ltd. (NASDAQ: ZJK) (“ZJK”), a high-tech precision parts and hardware manufacturer serving artificial intelligence (AI) infrastructure, consumer electronics, electric vehicles, aerospace and other smart technologies, today announced the launch of its next-generation cold forging dies for chamfered screws. By innovating manufacturing process design, the new product will improve production efficiency, reduce production costs, enhance precision control and support consistent product quality. The solution is designed for AI servers, industrial robotics, automated assembly and other advanced manufacturing applications, providing critical enabling components for the ongoing upgrade of global intelligent manufacturing.

The new dies enable the direct production of semi-finished products with built-in chamfers, thereby restructuring the traditional chamfering process and achieving simultaneous improvements in cost efficiency and product quality. Three key advantages are:

• Significant efficiency and cost benefits: Based on ZJK’s internal production assessments, production efficiency increases by approximately 30%–50% and total equipment investment per production line reduces by more than 40%, compared with traditional chamfering processes;
• Substantially improved precision and consistency: Based on ZJK’s internal testing results, length tolerance is controlled within 0.10mm, representing half that of conventional processes. It ensures highly consistent angles and shapes, meeting the stringent precision requirements of high-end manufacturing;
• Comprehensively enhanced product performance: Based on ZJK’s internal testing results, cold forging causes less material stress, resulting in smoother screw surfaces with minimal processing marks, while it simultaneously improves corrosion resistance and assembly compatibility.
  
  

These advantages effectively address the structural industry challenges associated with traditional screw chamfering processes that rely on customized thread rolling die plates, including limited flexibility, high overall costs, and constraints on product quality.

As AI infrastructure, industrial automation and intelligent manufacturing continue to advance, downstream production lines increasingly require fasteners that are easy to grip, position and tighten, while maintaining a high level of consistency. Against this backdrop, our revenues increased by approximately 48.39% to US$56.10 million for the year ended December 31,2025 from US$37.81 million for the year ended December 31, 2024, which ZJK believes reflects continued demand for high-precision components across its served markets. ZJK’s new dies will ensure structural and chamfer consistency at the source, and to enable seamless integration with robotic tightening systems, visual inspection lines and other intelligent manufacturing processes. The solution will to support a wide range of high-end manufacturing sectors, including AI servers, semiconductor equipment, industrial robotics, consumer electronics, electric vehicles, aerospace, medical devices, energy storage systems, rail transportation and smart home applications.

ZJK management stated: “Driven by growing demand for high-precision components across AI infrastructure, industrial automation, consumer electronics and electric vehicle sectors, the Company expects to sustain strong momentum in 2026. We believe that our next-generation cold forging dies not only provide customers with practical solutions for cost reduction, efficiency improvement and quality enhancement, but also strengthen ZJK’s technological competitiveness in advanced precision manufacturing and create new long-term growth drivers for the Company.”

About ZJK Industrial Co., Ltd.
ZJK Industrial Co., Ltd. is a high-tech precision parts and hardware manufacturer serving artificial intelligence (AI) infrastructure, consumer electronics, electric vehicles, aerospace and other smart technologies. With over fourteen years in the precision metal parts manufacturing industry, the Company maintains a skilled professional team, a series of highly automated and precision manufacturing equipment, a stable and diversified customer base, and comprehensive quality management systems. ZJK mainly offers standard screws, precision screws and nuts, high-strength bolts and nuts, turning parts, stamping parts and Computer Numerical Control (CNC) machining parts, CNC milling parts, high precision structural components, Surface Mounting Technology (SMT) for miniature parts packaging, and technology service for research and development from a professional engineering team. For more information, please visit the Company's website at https://ir.zjk-industrial.com/.

Forward-Looking Statements
Certain statements in this announcement are forward-looking statements. These forward-looking statements involve known and unknown risks and uncertainties and are based on the Company’s current expectations and projections about future events that the Company believes may affect its financial condition, results of operations, business strategy and financial needs. Investors can find many (but not all) of these statements by the use of words such as “may,” “will,” “expect,” “anticipate,” “aim,” “estimate,” “intend,” “plan,” “believe,” “likely to,” “propose” or other similar expressions in this announcement. The Company undertakes no obligation to update or revise publicly any forward-looking statements to reflect subsequent occurring events or circumstances, or changes in its expectations, except as may be required by law. Although the Company believes that the expectations expressed in these forward-looking statements are reasonable, it cannot assure you that such expectations will turn out to be correct, and the Company cautions investors that actual results may differ materially from the anticipated results and encourages investors to review other factors that may affect its future results in the Company’s filings with the U.S. Securities and Exchange Commission.

For more information, please contact:

ZJK Industrial Co., Ltd. 
Phone: +86-755-28341175
Email: ir@zjk-industrial.com

The Blueshirt Group Asia 
Feifei Shen
Phone: +86-134-66566136
Email: feifei@blueshirtgroup.co

FAQ

AI-generated questions and answers. How Rhea-AI works. Not financial advice.

What did ZJK (NASDAQ: ZJK) announce on May 13, 2026 about cold forging dies?

ZJK announced next-generation cold forging dies for chamfered screws aimed at advanced manufacturing applications. The integrated process is designed to improve efficiency, reduce costs and enhance precision for AI servers, industrial robotics, EVs and other intelligent manufacturing, according to ZJK.

How do ZJK's new cold forging dies improve production efficiency and costs for manufacturers?

According to ZJK, the new dies increase production efficiency by about 30%–50% versus traditional chamfering. Internal assessments also indicate more than 40% lower total equipment investment per production line, potentially helping manufacturers streamline screw production for automated, high-volume environments.

How did ZJK's revenue change in 2025 and what supported this growth?

ZJK reported 2025 revenue of US$56.10 million, up about 48.39% from US$37.81 million in 2024. According to ZJK, this increase reflects continued demand for high-precision components across AI infrastructure, industrial automation, consumer electronics, EVs and other advanced technology markets.

Which industries can use ZJK's next-generation cold forging dies for chamfered screws (ZJK stock)?

The dies target AI servers, semiconductor equipment, industrial robotics and automated assembly across high-end sectors. According to ZJK, potential users include consumer electronics, electric vehicles, aerospace, medical devices, energy storage, rail transportation, smart home applications and other intelligent manufacturing operations needing consistent, chamfered fasteners.

How do ZJK's cold forging dies enhance precision and product performance for AI and EV components?

According to ZJK, length tolerance is controlled within 0.10mm, around half typical conventional levels. Internal testing also suggests less material stress, smoother screw surfaces, fewer processing marks and improved corrosion resistance and assembly compatibility, supporting demanding AI, EV and automation applications.

What is ZJK's business outlook for 2026 following its new cold forging dies launch?

ZJK management expects to sustain strong momentum in 2026, driven by high-precision component demand. The company believes its next-generation cold forging dies can support cost reduction, efficiency improvement, quality enhancement and strengthen technological competitiveness in advanced precision manufacturing over the long term.