STOCK TITAN

Stratasys cuts 2026 revenue outlook to $556M–$561M

Available on EDGAR Accepted by SEC EDGAR Learn about SEC filing dates
(Moderate)

Sentiment and the balance of points

Rhea-AI Sentiment reads the wording of the document, how positive or negative its language is on a 1 to 5 scale. The balance of points shown with the takes weighs what the document actually discloses, so the two can disagree, for example when a trial that missed its main goal is described in upbeat language.

Form Type
6-K

Rhea-AI Filing Summary

Stratasys Ltd. (SSYS) reported Q3 2026 revenue of $142.6 million, up 4.1% from $137.0 million a year earlier. GAAP gross margin was 43.7%, versus 41.0%. GAAP net loss was $10.2 million ($0.12 per diluted share), compared with $55.6 million ($0.65) in Q3 2025; that quarter included a $33.9 million noncash impairment related to its Ultimaker investment. Non-GAAP net income was $3.5 million and Adjusted EBITDA was $8.0 million, versus $1.5 million and $5.0 million.

Operating cash flow was $3.5 million, versus $6.9 million. As of September 30, 2026, cash, equivalents and short-term deposits totaled $210.7 million, and the company reported no debt. Full-year 2026 revenue guidance is $556 million to $561 million, down from $565 million to $575 million; non-GAAP net income guidance is $9 million to $11 million and Adjusted EBITDA is $24 million to $26 million. Stratasys cited longer sales cycles and greater timing variability for larger, production-focused orders, and assumes inflation, relatively high interest rates, tariffs, exchange rates and supply-chain costs do not further impede economic activity.

2 points · 0 major

How this balance works

Rhea-AI gives every point it takes from this document a weight. Minor counts 1, Moderate 3 and Major 9, so one Major point outweighs several Minor ones. The bar adds up the weights on each side, and when neither side holds more than 65% of the total the balance reads Mixed.

It reads the document as published, with the same rules for every company, and it does not look at what the market expected or at how the stock traded, so a point can be objectively good on a day the stock falls.

Rhea-AI Sentiment measures something else, the tone of the wording.

0 major · 1 point

How the balance works

Positive

  • Moderate pointGAAP net loss narrowed to $10.2 million from $55.6 million in Q3 2025.
  • Moderate pointAdjusted EBITDA was $8.0 million, compared with $5.0 million a year earlier.

Negative

  • Moderate pointOperating cash flow was $3.5 million, compared with $6.9 million in Q3 2025.

Filing Explained

The 6-K furnishes Stratasys’s Q3 results and updated 2026 outlook; for non-GAAP gross-margin and operating-expense outlook, it provides no corresponding GAAP guidance or reconciliation, and says the missing GAAP measures are likely to differ significantly.

Revenue $142.6 million Q3 2026; $137.0 million in Q3 2025; up 4.1%
GAAP gross margin 43.7% Q3 2026; 41.0% in Q3 2025
GAAP net loss $10.2 million Q3 2026; $55.6 million in Q3 2025
Non-GAAP net income $3.5 million Q3 2026; $1.5 million in Q3 2025
Adjusted EBITDA $8.0 million Q3 2026; $5.0 million in Q3 2025
Operating cash flow $3.5 million Q3 2026; $6.9 million in Q3 2025
Cash, equivalents and short-term deposits $210.7 million As of September 30, 2026; the company reported no debt
Full-year revenue outlook $556 million to $561 million 2026 updated outlook; prior range was $565 million to $575 million
Adjusted EBITDA financial
"Adjusted EBITDA of $8.0 million, compared to $5.0 million"
Adjusted EBITDA is a way companies measure how much money they make from their core operations, like running a business, by removing certain costs or income that aren’t part of regular business activities. It helps investors see how well a company is doing without distractions from unusual expenses or gains, making it easier to compare companies or track performance over time.
non-GAAP gross margin financial
"Full year non-GAAP gross margins of 46.6% to 46.7%"
Non-GAAP gross margin is a measure of a company's profitability that shows how much money it makes from sales after subtracting the direct costs of producing its products or services, but without applying certain accounting adjustments required by standard rules. It helps investors understand the company's core earning ability by excluding items like one-time expenses or accounting changes. This metric provides a clearer picture of ongoing business performance beyond official financial reports.
tariff credit financial
"improved margins in the mix of systems sales and a tariff credit"
production-focused orders technical
"timing associated with larger, production-focused orders"

FAQ

AI-generated questions and answers. How Rhea-AI works. Not financial advice.

What was SSYS's revenue in Q3 2026?

SSYS reported Q3 2026 revenue of $142.6 million, up 4.1% from $137.0 million in the prior-year quarter. Aerospace and defense revenue grew over 35% year over year, and systems revenue was $35.9 million, up approximately 12%.

What is SSYS's 2026 revenue outlook?

SSYS's updated full-year 2026 revenue outlook is $556 million to $561 million, compared with its prior range of $565 million to $575 million. The company said the outlook reflects longer sales cycles and greater timing variability for larger, production-focused orders.

What affected SSYS's Q3 2026 non-GAAP gross margin?

Non-GAAP gross margin was 47.8% in Q3 2026, compared with 45.3% a year earlier. Stratasys attributed the improvement primarily to improved margins in the mix of systems sales and a tariff credit, partly offset by lower consumables revenue.

AI-generated analysis. How Rhea-AI works. Not financial advice.

See more from StockTitan in Google Search and AI answers. Adds StockTitan as a preferred source · opens Google
Add on Google

 
 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
 
FORM 6-K
 
Report of Foreign Private Issuer
Pursuant to Rule 13a-16 or 15d-16
under the Securities Exchange Act of 1934
 
For the month of November 2026
 
Commission File Number 001-35751
 
STRATASYS LTD.
(Translation of registrant’s name into English)
 
c/o Stratasys, Inc.
5995 Opus Parkway
Minnetonka, Minnesota 55343
1 Holtzman Street, Science Park
P.O. Box 2496
Rehovot, Israel 76124
(Addresses of principal executive offices)
 
Indicate by check mark whether the registrant files or will file annual reports under cover of Form 20-F or Form 40-F:
 
Form 20-F ☒      Form 40-F ☐
 
 
 
 
 
 




CONTENTS
 
Quarterly Results of Operations 
On November 12, 2026, Stratasys Ltd. (“Stratasys”, “we” or “us”) announced its financial results for the third quarter ended September 30, 2026.  A copy of our press release announcing our results is furnished as Exhibit 99.1 to this Report of Foreign Private Issuer on Form 6-K (this “Form 6-K”) and is incorporated herein by reference.
In conjunction with the conference call being held on November 12, 2026 to discuss our results, we are furnishing a copy of the slide presentation that provides supplemental information regarding our business and our financial results, and which will be referenced on that conference call. We have attached that presentation as Exhibit 99.2 to this Form 6-K, which exhibit is incorporated herein by reference.
The information in this Form 6-K, including Exhibits 99.1 and 99.2, shall not be deemed to be “filed” for the purposes of Section 18 of the Securities Exchange Act of 1934, as amended, and shall not be incorporated by reference into any filing under the Securities Act of 1933, as amended, except as shall be expressly set forth by specific reference in such filing.

Exhibits
The following exhibits are furnished as part of this Form 6-K: 
ExhibitDescription
99.1
Press release dated November 12, 2026 announcing the financial results of Stratasys Ltd. for the third quarter ended September 30, 2026
99.2
Slide presentation providing supplemental information to be referenced on the conference call of Stratasys Ltd. discussing its quarterly financial results, being held on November 12, 2026
 
 




SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
STRATASYS LTD.
Dated: November 12, 2026
By:/s/ Eitan Zamir
Name: Eitan Zamir
Title:Chief Financial Officer
 

Exhibit 99.1
ssyslogo.gif

Stratasys Releases Third Quarter 2026 Financial Results
•Revenue of $142.6 million, up 4.1% compared to $137.0 million in the prior year period; up 3.6% sequentially from $137.6 million in the second quarter 2026
•Revenue in Aerospace and Defense, the largest business, grew over 35% compared to the prior year, and approximately 25% sequentially compared to second quarter 2026
•Systems revenue of $35.9 million, up approximately 12% compared to $32.1 million in the prior year period
•GAAP net loss of $10.2 million, or ($0.12) per diluted share, and non-GAAP net income of $3.5 million, or $0.04 per diluted share
•Adjusted EBITDA of $8.0 million, compared to $5.0 million in the prior year period
•Positive operating cash flow of $3.5 million
•$210.7 million in cash, equivalents and short-term deposits and no debt at September 30, 2026
•Updates full-year 2026 guidance
MINNETONKA, Minn. & REHOVOT, Israel - (BUSINESS WIRE) – November 12, 2026 - Stratasys Ltd. (Nasdaq: SSYS), (“Stratasys” or the “Company”), a leader in polymer 3D printing solutions, today announced its financial results for the third quarter ended September 30, 2026.
“Our third quarter results reflect the successful ongoing shift from rapid prototyping to manufacturing, as reflected in the 4.1% growth year over year, supported by disciplined expense management,” said Dr. Yoav Zeif, CEO of Stratasys. “Our largest business, aerospace and defense, grew more than 35% year-over-year, in addition to growth in our automotive, dental and Stratasys Direct businesses. We continue to experience robust customer engagement across our pipeline as we navigate longer and more variable timelines for large, production-focused awards, which we have factored into our updated outlook. Demand for industrial additive manufacturing is increasingly structural, driven by megatrends such as onshoring, speed, cost and the need for resilient supply chains. With our debt-free balance sheet and strong cash position, we are poised to keep investing in our strategy to create long-term value for all stakeholders.”
Summary - Third Quarter 2026 Financial Results Compared to Third Quarter 2025:
•Revenue of $142.6 million up 4.1% compared to $137.0 million, and a 3.6% sequential increase from $137.6 million in the second quarter of 2026.
•GAAP gross margin of 43.7%, compared to 41.0%.
•Non-GAAP gross margin of 47.8%, compared to 45.3% primarily due to improved margins in the mix of systems sales and a tariff credit, partially offset by lower consumables revenue.
•GAAP operating loss of $11.0 million, compared to GAAP operating loss of $22.7 million.
•Non-GAAP operating income of $2.7 million, compared to $0.1 million.
1


ssyslogo.gif
•GAAP net loss of $10.2 million, or ($0.12) per diluted share, compared to net loss of $55.6 million, or ($0.65) per diluted share, which included a non-cash impairment of $33.9 million, or $0.40 per diluted share, related to Ultimaker investment.
•Non-GAAP net income of $3.5 million, or $0.04 per diluted share, compared to $1.5 million, or $0.02 per diluted share.
•Adjusted EBITDA of $8.0 million, compared to $5.0 million.
•Cash generated by operations of $3.5 million, compared to $6.9 million.
Financial Outlook:
The Company is adjusting its outlook for full year 2026. This outlook is based on current market conditions and assumes that the impacts of global inflationary pressures, relatively high interest rates, tariffs, exchange rates and other supply chain costs do not further impede economic activity. The specific metrics include adjustments that reflect longer sales cycles and greater variability in timing associated with larger, production-focused orders:
•Full year revenue of $556 million to $561 million, compared to the prior range of $565 million to $575 million, representing sequential improvement during the year.
•Full year non-GAAP gross margins of 46.6% to 46.7%, compared to prior range of 46.7% to 47.1%.
•Full year non-GAAP operating expenses ranging from $256 million to $257 million, compared to prior range of $260 million to $262 million.
•Full year non-GAAP operating margins in a range of 0.6% to 0.9%, compared to prior range of 0.7% to 1.5%.
•GAAP net loss of $77 million to $64 million, or ($0.88) to ($0.73) per diluted share, compared to prior range of $83 million to $67 million, or ($0.95) to ($0.76) per diluted share.
•Non-GAAP net income of $9 million to $11 million, or $0.10 to $0.12 per diluted share, compared to prior range of $8 million to $12.5 million, or $0.09 to $0.14 per diluted share.
•Adjusted EBITDA of $24 million to $26 million, with Adjusted EBITDA margin of 4.0% to 4.5%, compared to prior range of $25 million to $30 million, with Adjusted EBITDA margin of 4.5% to 5.0%.
•Capital expenditures of $15 million to $20 million.
Appropriate reconciliations between historical GAAP and non-GAAP financial measures, as well as between the GAAP and non-GAAP financial measures included in our updated financial outlook for 2026, are provided in the tables at the end of this press release and slide presentation, with itemized detail concerning the non-GAAP financial measures. We have not included, however, guidance for 2026 for GAAP gross margin or GAAP operating expenses, or a reconciliation of our guidance for 2026 for non-GAAP gross margins or non-GAAP operating expenses to the most directly comparable GAAP financial measures (i.e., GAAP gross margin and GAAP operating expenses, respectively), as the
2


ssyslogo.gif
information needed to provide that GAAP guidance and that reconciliation is not available to us without unreasonable effort or with reasonable certainty from a quantitative perspective. We expect that the foregoing missing information related to our outlook on a GAAP basis for 2026 is likely to result in significant changes relative to our non-GAAP outlook in respect of the subject financial measures.
Stratasys Ltd. Third Quarter 2026 Webcast and Conference Call Details
The Company plans to webcast its conference call to discuss its third quarter 2026 financial results on Thursday, November 12, 2026, at 8:30 AM ET.
The investor conference call will be available via live webcast on the Stratasys Web site at investors.stratasys.com, or directly at the following web address:
https://event.choruscall.com/mediaframe/webcast.html?webcastid=0uO1fT80
To participate by telephone, the U.S. toll-free number is 877-407-0619 and the international dial-in is +1-412-902-1012. Investors are advised to dial into the call at least ten minutes prior to the call to register. The webcast will be available for six months at investors.stratasys.com, or by accessing the above-provided web address.
Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries such as aerospace, automotive, consumer products, healthcare, fashion and education. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage in the product value chain. The world’s leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.
To learn more about Stratasys, visit www.stratasys.com, the Stratasys blog, Twitter, LinkedIn, or Facebook. Stratasys reserves the right to utilize any of the foregoing social media platforms, including the Company’s websites, to share material, non-public information pursuant to the SEC’s Regulation FD. To the extent necessary and mandated by applicable law, Stratasys will also include such information in its public disclosure filings.
Stratasys is a registered trademark and the Stratasys signet is a trademark of Stratasys Ltd. and/or its subsidiaries or affiliates. All other trademarks are the property of their respective owners.
Cautionary Statement Regarding Forward-Looking Statements
The statements in this press release regarding Stratasys' strategy, and the statements regarding its projected future financial performance, including the financial guidance concerning its expected results for 2026, are forward-looking statements reflecting management's current expectations and beliefs. These forward-looking statements are based on current information that is, by its nature, subject to rapid and even abrupt change. Due to risks and uncertainties associated with Stratasys' business, actual results could differ materially from those projected or implied by these forward-looking statements. These risks and uncertainties include, but are not limited to: the extent of our success at introducing new or improved products and solutions that gain market share; the extent of growth of the 3D printing market generally; the global macro-economic environment, including the impact of higher energy costs due to the U.S.-Iranian conflict; global trends involving inflation, interest rates, economic activity and currency exchange rates, and their impact on the additive manufacturing industry, our company and our customers, in particular; changes in our overall strategy, including as related to any restructuring activities and our capital expenditures; the impact of potential shifts in the prices or margins of the products that we sell or services that we provide, including due to a shift towards lower margin products or services; the impact of competition and new technologies; potential further charges against earnings that we could be required to take due to impairment of additional goodwill or other intangible assets;
3


ssyslogo.gif
the extent of our success at successfully consummating and integrating into our existing business acquisitions or investments in new businesses, technologies, products or services; the potential adverse impact of global interruptions and delays involving freight carriers and other third parties on our supply chain and distribution network; global market, political and economic conditions, and in the countries in which we operate in particular; potential adverse effects of any renewed military conflict between the United States and Israel, on the one hand, and Iran and its sponsored terrorist organizations Hamas, Hezbollah, and, intermittently, the Houthi terrorist group in Yemen, on the other hand; costs and potential liability relating to litigation and regulatory proceedings; risks related to infringement of our intellectual property rights by others or infringement of others' intellectual property rights by us; the extent of our success at maintaining our liquidity and financing our operations and capital needs; the impact of tax regulations on our results of operations and financial condition; and those additional factors referred to in Item 3.D “Key Information - Risk Factors”, Item 4, “Information on the Company”, Item 5, “Operating and Financial Review and Prospects,” and all other parts of our Annual Report on Form 20-F for the year ended December 31, 2025, which we filed with the U.S. Securities and Exchange Commission, or SEC, on March 5, 2026 (the “2025 Annual Report”). Readers are urged to carefully review and consider the various disclosures made throughout our 2025 Annual Report and the Reports of Foreign Private Issuer on Form 6-K that attach Stratasys’ unaudited, condensed consolidated financial statements and its review of its results of operations and financial condition, for the quarterly periods throughout 2026, which have been or will be furnished to the SEC throughout 2026, and our other reports filed with or furnished to the SEC, which are designed to advise interested parties of the risks and factors that may affect our business, financial condition, results of operations and prospects. Any guidance provided, and other forward-looking statements made, in this press release are provided or made (as applicable) as of the date hereof, and Stratasys undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.
Use of Non-GAAP Financial Measures
The non-GAAP data included herein, including, but not limited to, data for non-GAAP gross margins, non-GAAP operating expenses, non-GAAP operating income, non-GAAP operating margins, non-GAAP net income, and Adjusted EBITDA, which non-GAAP data excludes certain items, as detailed in the reconciliation tables herein (except for such data related to our outlook for 2026 for which we are unable to provide data for the excluded items), are non-GAAP financial measures. Our management believes that these non-GAAP financial measures are useful information for investors and shareholders of our company in gauging our results of operations. Our management utilizes these non-GAAP measures to enable us to assess our financial results (i) on an ongoing basis after excluding mergers, acquisitions and divestments related expense or gains and reorganization-related charges or gains and legal provisions, (ii) excluding non-cash items such as share-based compensation expenses, acquired intangible assets amortization, including intangible assets amortization related to equity method investments, impairment of long-lived assets and goodwill, revaluation of our investments and the corresponding tax effect of those items, (iii) for certain non-GAAP measures, after eliminating the impact of changes attributable to currency exchange rate fluctuations, and (iv) after excluding changes in revenues solely attributable to divestitures of former subsidiary companies. The items eliminated as part of our calculation of our non-GAAP financial measures either do not reflect actual cash outlays that impact our liquidity and our financial condition or have a non-recurring impact on the statement of operations, as assessed by management. Our non-GAAP financial measures are presented to permit investors to more fully understand how management assesses our performance for internal planning and forecasting purposes. The limitations of using these non-GAAP financial measures as performance measures are that they provide a view of our results of operations without including all items indicated above during a reporting period, which may not provide a comparable view of our performance relative
4


ssyslogo.gif
to other companies in our industry. Investors and other readers should consider non-GAAP measures only as supplements to, not as substitutes for or as superior measures to, the measures of financial performance prepared in accordance with GAAP. Reconciliation between results, and between certain items for our outlook for 2026, on a GAAP and non-GAAP basis is provided in the tables below.

Yonah Lloyd
CCO & VP Investor Relations
Yonah.Lloyd@stratasys.com
Source: Stratasys Ltd.
5



Stratasys Ltd.
Consolidated Balance Sheets
(U.S. $ in thousands, except share data)
(Unaudited)
September 30, 2026December 31, 2025
ASSETS
Current assets
Cash and cash equivalents$130,719 $94,527 
Short-term bank deposits
80,000 150,000 
Accounts receivable, net of allowance for credit losses of $4,398 and $4,145 as of September 30, 2026 and December 31, 2025, respectively169,119 160,478 
Inventories142,907 145,238 
Prepaid expenses10,577 5,500 
Other current assets26,223 26,241 
Total current assets559,545 581,984 
Non-current assets
Property, plant and equipment, net189,424 192,566 
Goodwill100,223 101,599 
Other intangible assets, net80,293 95,842 
Operating lease right-of-use assets24,995 25,417 
Long-term investments78,368 63,104 
Other non-current assets15,137 13,252 
Total non-current assets488,440 491,780 
Total assets$1,047,985 $1,073,764 
LIABILITIES AND EQUITY
Current liabilities
Accounts payable $48,992 $43,021 
Accrued expenses and other current liabilities24,407 34,284 
Accrued compensation and related benefits 35,546 31,304 
Deferred revenues - short-term
48,212 47,835 
Operating lease liabilities - short-term
6,489 6,597 
Total current liabilities163,646 163,041 
Non-current liabilities
Deferred revenues - long-term16,899 19,062 
Deferred income taxes286 312 
Operating lease liabilities - long-term
19,832 19,903 
Contingent consideration - long-term
5,490 5,353 
Other non-current liabilities29,332 23,193 
Total non-current liabilities71,839 67,823 
Total liabilities$235,485 $230,864 
Contingencies (see note 12)
Equity
Ordinary shares, NIS 0.01 par value, authorized 180,000 thousand shares; 88,358 thousand shares and 86,376 thousand shares issued at September 30, 2026 and December 31, 2025, respectively; 88,091 thousand shares and 86,110 thousand shares outstanding at September 30, 2026 and December 31, 2025, respectively$248 $242 
Treasury shares at cost, 266 thousand shares at September 30, 2026 and December 31, 2025(1,995)(1,995)
Additional paid-in capital3,295,815 3,275,344 
Accumulated other comprehensive loss(6,174)(6,197)
Accumulated deficit(2,475,394)(2,424,494)
Total equity812,500 842,900 
Total liabilities and equity$1,047,985 $1,073,764 




Stratasys Ltd.
Consolidated Statements of Operations
(U.S. $ in thousands, except per share data)
Three Months Ended September 30,Nine Months Ended September 30,
(Unaudited)2026202520262025
Revenues
Products$97,109 $94,061 $278,601 $282,647 
Services45,531 42,909 134,342 128,455 
142,640 136,970 412,943 411,102 
Cost of revenues
Products48,775 49,808 143,357 145,693 
Services31,539 31,070 93,661 89,584 
80,314 80,878 237,018 235,277 
Gross profit62,326 56,092 175,925 175,825 
Operating expenses
Research and development, net20,185 20,561 58,797 59,274 
Selling, general and administrative53,153 58,235 168,139 168,279 
73,338 78,796 226,936 227,553 
Operating loss(11,012)(22,704)(51,011)(51,728)
Financial income, net
1,120 2,656 7,137 7,415 
Loss before income taxes(9,892)(20,048)(43,874)(44,313)
Income tax expenses
318 524 7,026 2,020 
Share in losses of associated companies and impairment charges
— 35,062 — 39,100 
Net loss$(10,210)$(55,634)$(50,900)$(85,433)
Net loss per ordinary share - basic and diluted
$(0.12)$(0.65)$(0.58)$(1.06)
Weighted average ordinary shares outstanding - basic and diluted
87,732 85,151 87,063 80,230 




Stratasys Ltd.
Reconciliation of GAAP to Non-GAAP Results of Operations
Three Months Ended September 30,
2026Non-GAAP20262025Non-GAAP2025
GAAPAdjustmentsNon-GAAPGAAPAdjustmentsNon-GAAP
U.S. dollars and shares in thousands (except per share amounts)
Gross profit (1)$62,326 $5,908 $68,234 $56,092 $5,971 $62,063 
Operating income (loss) (1,2)(11,012)13,716 2,704 (22,704)22,781 77 
Net income (loss) (1,2,3)(10,210)13,683 3,473 (55,634)57,109 1,475 
Net income (loss) per diluted share (4)$(0.12)$0.16 $0.04 $(0.65)$0.67 $0.02 
(1)
Acquired intangible assets amortization expenses4,521 4,526 
Non-cash share-based compensation expenses743 819 
Restructuring and other expenses644 626 
5,908 5,971 
(2)
Acquired intangible assets amortization expenses1,173 1,068 
Non-cash share-based compensation expenses4,990 4,816 
Restructuring and other related costs1,424 2,639 
Revaluation of investment— 2,208 
Contingent consideration151 — 
Legal and other expenses70 6,079 
7,808 16,810 
13,716 22,781 
(3)
Corresponding tax effect156 191 
Equity method related expenses and impairment charges
— 34,337 
Finance income
(189)(200)
$13,683 $57,109 
(4)
 Weighted average number of ordinary shares outstanding - Diluted
87,732 88,135 85,151 86,000 




Stratasys Ltd.
Nine Months Ended September 30,
2026Non-GAAP20262025Non-GAAP2025
GAAPAdjustmentsNon-GAAPGAAPAdjustmentsNon-GAAP
U.S. dollars and shares in thousands (except per share amounts)
Gross profit (1)$175,925 $18,659 $194,584 $175,825 $17,704 $193,529 
Operating income (loss) (1,2)
(51,011)50,628 (383)(51,728)55,967 4,239 
Net income (loss) (1,2,3)
(50,900)55,362 4,462 (85,433)91,966 6,533 
Net income (loss) per diluted share (4)
$(0.58)$0.63 $0.05 $(1.06)$1.14 $0.08 
(1)
Acquired intangible assets amortization expenses
13,564 13,531 
Non-cash share-based compensation expenses
2,192 2,273 
Restructuring and other expenses
2,903 1,900 
18,659 17,704 
(2)
Acquired intangible assets amortization expenses
3,561 2,923 
Non-cash share-based compensation expenses
15,042 15,713 
Restructuring and other related costs
3,022 4,231 
Revaluation of investment
— 2,208 
Contingent consideration(3,580)1,288 
Legal and other expenses 13,924 11,900 
31,969 38,263 
50,628 55,967 
(3)
Corresponding tax effect
5,915 457 
Equity method related expenses and impairment charges
— 36,245 
Finance income
(1,181)(703)
$55,362 $91,966 
(4)
 Weighted average number of ordinary shares outstanding - Diluted
87,063 87,589 80,230 80,951 








Stratasys Ltd.
Reconciliation of GAAP net loss to Adjusted EBITDA
Three Months Ended September 30,Nine Months Ended September 30,
2026202520262025
U.S. $ in thousands
U.S. $ in thousands
Net loss$(10,210)$(55,634)$(50,900)$(85,433)
Financial income, net
(1,120)(2,656)(7,137)(7,415)
Income tax expenses318 524 7,026 2,020 
Share in losses of associated companies and impairment charges
— 35,062 — 39,100 
Depreciation expenses
5,443 5,085 16,492 15,548 
Amortization expenses
5,701 5,602 17,149 16,481 
Non-cash share-based compensation expenses
5,733 5,635 17,234 17,986 
Contingent consideration151 — (3,580)1,288 
Legal and other expenses438 6,466 14,522 12,020 
Restructuring and other related costs
1,594 2,752 4,563 5,540 
Adjusted EBITDA$8,048 $5,044 $15,369 $19,343 




Stratasys Ltd.

Reconciliation of GAAP Net Loss to Non-GAAP Net Income Forward Looking Guidance:
Fiscal Year 2026
(U.S. $ in millions, except per share data)LowHigh
GAAP net loss$(77)to$(64)
Adjustments
Share-based compensation expenses
$24to$26
Intangible assets amortization expenses
$23to$25
Reorganization and other
$22to$28
Tax expenses related to Non-GAAP adjustments
$6to$7
Non-GAAP net income$9to$11
GAAP loss per share$(0.88)to$(0.73)
Non-GAAP diluted earnings per share$0.10to$0.12

Reconciliation of GAAP Net Loss to Adjusted EBITDA Forward Looking Guidance:
Fiscal Year 2026
(U.S. $ in millions, except per share data)LowHigh
GAAP net loss$(77)to$(64)
Adjustments
Share-based compensation expenses
$24to$26
Intangible assets amortization expenses
$23to$25
Reorganization and other
$22to$28
Tax expenses related to Non-GAAP adjustments
$6to$7
Other non-operating income
$(6)to$(6)
Depreciation$21to$21
Adjusted EBITDA$24to$26





Stratasys Ltd.
Reconciliation of GAAP Operating Loss to Non-GAAP Operating Income Forward Looking Guidance:
Fiscal Year 2026
(U.S. $ in millions, except per share data)LowHigh
GAAP operating loss$(76)to$(64)
GAAP operating margins(14)%to(11)%
Adjustments
Share-based compensation expenses
$24to$26
Intangible assets amortization expenses
$23to$25
Reorganization and other$22to$28
Non-GAAP operating profit$3to$5
Non-GAAP operating margins0.6%to0.9%

Make additive work for you Q3 2026 Results Speakers Dr. Yoav Zeif, CEO Eitan Zamir, CFO Yonah Lloyd, CCO & VP IR November 12 | 2026


 

Make additive work for you Live Webcast and Replay CONFERENCE CALL AND WEBCAST LINK US Toll-Free Dial-In 1-877-407-0619 International Dial-In +1-412-902-1012


 

Make additive work for you Forward-Looking Statements The statements in this slide presentation regarding Stratasys' strategy and its projected future financial performance, including the financial guidance concerning its expected results for 2026, are forward-looking statements reflecting management's current expectations and beliefs. These forward-looking statements are based on current information that is, by its nature, subject to rapid and even abrupt change. Due to risks and uncertainties associated with Stratasys' business, actual results could differ materially from those projected or implied by these forward-looking statements. These risks and uncertainties include, but are not limited to: the extent of our success at introducing new or improved products and solutions that gain market share; the extent of growth of the 3D printing market generally; the global macro-economic environment, including global trends involving inflation, interest rates, economic activity, currency exchange rates, and increased energy costs, and their impact on the additive manufacturing industry, our company and our customers, in particular; changes in our overall strategy, including as related to any restructuring activities and our capital expenditures; the impact of potential shifts in the prices or margins of the products that we sell or services that we provide, including due to a shift towards lower margin products or services; the impact of competition and new technologies; potential further charges against earnings that we could be required to take due to impairment of additional goodwill or other intangible assets; the extent of our success at successfully consummating and integrating into our existing business acquisitions or investments in new businesses, technologies, products or services; the potential adverse impact of global interruptions and delays involving freight carriers and other third parties on our supply chain and distribution network; global market, political and economic conditions, and in the countries in which we operate in particular; potential adverse effects of any renewed military conflict between the United States and Israel, on the one hand, and Iran and/or its sponsored terrorist organizations Hamas, Hezbollah, and, intermittently, the Houthis, on the other hand; costs and potential liability relating to litigation and regulatory proceedings; risks related to infringement of our intellectual property rights by others or infringement of others' intellectual property rights by us; the extent of our success at maintaining our liquidity and financing our operations and capital needs; the impact of tax regulations on our results of operations and financial condition; and those additional factors referred to in Item 3.D “Key Information - Risk Factors”, Item 4, “Information on the Company”, Item 5, “Operating and Financial Review and Prospects,” and all other parts of our Annual Report on Form 20-F for the year ended December 31, 2025, filed with the U.S. Securities and Exchange Commission, or SEC, on March 5, 2026 (the “2025 Annual Report”). Readers are urged to carefully review and consider the various disclosures made throughout our 2025 Annual Report and the Reports of Foreign Private Issuer on Form 6-K that attach Stratasys’ unaudited, condensed consolidated financial statements and its review of its results of operations and financial condition, for the quarterly periods throughout 2026, which have been or will be furnished to the SEC throughout 2026, and our other reports filed with or furnished to the SEC, which are designed to advise interested parties of the risks and factors that may affect our business, financial condition, results of operations and prospects. Any guidance provided, and other forward-looking statements made, in this slide presentation are provided or made (as applicable) as of the date hereof, and Stratasys undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law. Cautionary Note Regarding Forward-Looking Statements


 

Make additive work for you Use of Non-GAAP Financial Information The non-GAAP data included herein, which excludes certain items as described below, are non-GAAP financial measures. Our management believes that these non-GAAP financial measures are useful information for investors and shareholders of our company in gauging our results of operations. Our management utilizes these non-GAAP measures to enable us to assess our financial results (i) on an ongoing basis after excluding mergers, acquisitions and divestments related expense or gains and reorganization-related charges or gains and legal provisions, (ii) excluding non-cash items such as share- based compensation expenses, acquired intangible assets amortization, including intangible assets amortization related to equity method investments, impairment of long-lived assets and goodwill, revaluation of our investments and the corresponding tax effect of those items, (iii) for certain non-GAAP measures, after eliminating the impact of changes attributable to currency exchange rate fluctuations, and (iv) after excluding changes in revenues solely attributable to divestitures of former subsidiary companies. The items eliminated as part of our calculation of our non-GAAP financial measures either do not reflect actual cash outlays that impact our liquidity and our financial condition or have a non-recurring impact on the statement of operations, as assessed by management. Our non-GAAP financial measures are presented to permit investors to more fully understand how management assesses our performance for internal planning and forecasting purposes. The limitations of using these non-GAAP financial measures as performance measures are that they provide a view of our results of operations without including all items indicated above during a reporting period, which may not provide a comparable view of our performance relative to other companies in our industry. Investors and other readers should consider non-GAAP measures only as supplements to, not as substitutes for or as superior measures to, the measures of financial performance prepared in accordance with GAAP. Reconciliation between results on a GAAP and non-GAAP basis is provided in the tables later in this slide presentation. We have not included herein, however, a reconciliation of our non-GAAP guidance for 2026 to the most directly comparable GAAP guidance. Please see our earnings release being published today for that reconciliation (other than for our guidance for non- GAAP gross margin, non-GAAP operating expenses, and non-GAAP operating margins, as we are unable to obtain the information needed to provide either the equivalent GAAP figures (projected GAAP gross margin, projected GAAP operating expenses and projected GAAP operating margins) or the related reconciliation without unreasonable effort or with reasonable certainty from a quantitative perspective). Use of Non-GAAP Financial Measures


 

Make additive work for you Third quarter results reflect successful ongoing shift from rapid prototyping to manufacturing, as reflected in the 4.1% YoY growth Aerospace & Defense grew over 35% YoY Growth in Automotive, Dental and Stratasys Direct Generated positive operating cash flow Key benefits of onshoring/supply chain, speed, cost Shift to production driving recurring revenue Dr. Yoav Zeif CEO


 

Make additive work for you AEROSPACE & DEFENSE 35%+ YoY Revenue Growth Momentum Continuing • Two significant defense orders to continue scaling programs • Strong follow-on orders for embedded flight-grade production • Continued healthy demand across FDM portfolio in general Broad-Based Growth Across A&D Sub-Verticals • Drones, space, munitions, eVTOL/advanced air mobility • SAF replacing traditional supply chains for just-in-time bridge production Megatrends Translate into Durable, Structural Demand • High requirement programs result in larger orders with extended sales cycle and more time variability • Parts qualified on our platform are long-term given replacement complexity/cost • Mission-critical performance and accelerating supply chain resiliency mandates • Consistent growth, high engagement and demand • Significant opportunity to expand with both legacy users and startups • Welcome David Chinn, new BOD member with deep A&D experience


 

Make additive work for you AUTOMOTIVE – GM Scales Production Efficiency with Stratasys Challenge Improve legacy tooling and production with measurable results Solution AM Center of Excellence - dozens of SSYS industrial 3D printers across multiple plants enabling on-demand, localized production Impact for GM $10M annual savings from localized AM production 4× faster tooling response time improving plant efficiency Benefits of significant lightweighting improving worker safety Increased flexibility & adaptability through scalable distributed manufacturing 2026 – Over 5K factory floor applications GM consistently a top printer utilization customer in production - a reflection of the high quality of our materials which translates into recurring revenue Symbiotic “multi-win” relationship includes the consumer that gets a better produced vehicle Example: GM’s 3D-printed catalytic converter lift assist delivers 91% lower cost and 66% shorter lead time


 

Make additive work for you AUTOMOTIVE New F870 FDM System FAW Follow-on Purchases F870 Launch Factory-floor tooling, fixtures and end-use parts Longest heated build chamber in its class Toyota and Rivian among the first adopters FAW Group Agreement Leading Chinese OEM expanding to 25 Stratasys printers in 2026 Reflects high quality of systems and recurring nature of scaling after initial deployment Trend: Manufacturers are moving additive from prototyping to factory floor


 

Make additive work for you Robust Demand from Defense Sector Top customers driven by drone parts Synergies with Stratasys OEM business Helping customers move from application development -> qualification -> scaled production Strong Backlog for Expanding Applications Backlog higher than ever Shift from simple to complex parts Trusted one-stop-solution Planned large-scale AI automation US Onshoring addresses A&D capacity shortages Proves production capabilities for high requirement customers and then deliver manufacturing at scale at their facilities STRATASYS DIRECT – 9% Growth Driven by Aerospace and Defense


 

Make additive work for you DENTAL – Approval in India / DDS Collaboration India Approves TrueDent as Medical Device ~7M dentures produced in India each year Stratasys dentures significantly lower price Speed can remediate current 1-yr wait times DDS Launches Direct-to-Finish Partial Dentures Powered by TrueDent and a metal 3DP Digital, predictable, less processing = faster Exciting potential in coming years to be major growth driver Key partners Glidewell and Affordable Dentures


 

Make additive work for you COMMUNITY – Limbitless Expansion for Child Prosthetics University-based nonprofit uses Stratasys technology to bring 3D-printed prosthetic limbs to children Expanded partnership broadens reach with renewed focus on sustainability and education Same production-grade AM capabilities driving industry are improving human lives


 

Make additive work for you Third Quarter Results Reflect: Continued execution on our MFG-focused strategy Industrial focus areas A&D and Auto performed well A&D grew over 35% YoY, ~25% sequentially Eitan Zamir CFO


 

Make additive work for you Quarterly Trend 94.1 97.6 88.8 92.7 97.1 42.9 42.4 43.9 44.9 45.5 137.0 140.0 132.7 137.6 142.6 Q3'25 Q4'25 Q1'26 Q2'26 Q3'26 Product Service Q3 2026 Revenue Note: $ in millions unless noted otherwise. All numbers and percentages rounded. Revenues – Q3’26 Revenue Y/Y Product - $97.1M 3.2% ▪ Systems - $35.9M 11.8% ▪ Consumables - $61.2M -1.3% Services - $45.5M 6.1% ▪ Customer Support - $30.5M 4.3%


 

Make additive work for you GAAP Non-GAAP 45.3% 46.3% 46.3% 47.2% 47.8% 52.4% 50.2% 53.8% 54.8% 55.2% 29.7% 37.4% 31.0% 31.4% 32.1% Q3-25 Q4-25 Q1-26 Q2-26 Q3-26 Services Gross MarginProducts Gross Margin Total Gross Margin Note: All percentages rounded. 47.0% 37.7% 47.5% 48.2% 49.7% 27.6% 34.5% 30.1% 30.1% 30.8% 41.0% 36.8% 41.7% 42.3% 43.7% Q3-25 Q4-25 Q1-26 Q2-26 Q3-26 Q3 2026 Gross Margins


 

Make additive work for you GAAP Operating Expenses (absolute and as a percentage of revenues) Non-GAAP Operating Expenses (absolute and as a percentage of revenues) 78.8 73.3 51.4% Q3'25 Q3'26 57.5% 62.0 65.5 Q3'25 Q3'26 45.9%45.3% Note: $ in millions unless noted otherwise. All numbers and percentages rounded. Q3 2026 Operating Expenses


 

Make additive work for you GAAP Operating Loss (22.7) Q3’25 (11.0) Q3’26 GAAP Net Loss EPS diluted ($0.65) in Q3’25 vs ($0.12) in Q3’26 (55.6) Q3’25 (10.2) Q3’26 Non-GAAP Operating Income 0.1% in Q3’25 vs 1.9% in Q3’26 out of total revenue 0.1 Q3’25 2.7 Q3’26 Non-GAAP Net Income EPS diluted $0.02 in Q3’25 vs $0.04 in Q3’26 1.5 Q3’25 3.5 Q3’26 Adjusted EBITDA 3.6% in Q3’25 vs 5.6% in Q3’26 out of total revenue 5.0 Q3’25 8.0 Q3’26 Note: $ in millions, except per share amounts unless noted otherwise. All numbers and percentages rounded. Q3 2026 Operating, Net and EBITDA


 

Make additive work for you Balance Sheet ItemsCash Flow from Operating Activities Strong Balance Sheet – $210.7M Cash, Equivalents and No Debt 17 Note: $ in millions unless noted otherwise. All numbers and percentages rounded. 6.9 3.5 Q3-25 Q3-26 Q3-25 Q4-25 Q3-26 Cash and Cash Equivalents and Short-term deposits 255.0 244.5 210.7 Accounts Receivable 151.3 160.5 169.1 Inventories 159.3 145.2 142.9 Net Working Capital 438.4 418.9 395.9


 

Make additive work for you Revenues Non-GAAP Operating Expenses Non-GAAP Operating Margins Adjusted Net Income Adjusted EPS diluted GAAP Net loss ($77M) - ($64M) GAAP EPS ($0.88) - ($0.73) CAPEX Adjusted EBITDA 4.0% - 4.5% of Revenue $556M – $561M 46.6% – 46.7% $256M – $257M $15M – $20M$24M – $26M0.6% – 0.9% Positive Operating Cash Flow for H2 2026 2026 Updated Full-Year Outlook $9M – $11M $0.10 – $0.12 Non-GAAP Gross Margins


 

Make additive work for you Dr. Yoav Zeif Summary Solid results and growth demonstrate progress of MFG-focused strategy Ongoing A&D momentum + flagship customer proof points reinforce structural demand Larger orders impact timing variability Q3 showed what production focused strategy can deliver Remain focused on strategy and confident in long- term path


 

THANK YOU


 

Make additive work for you Appendix – Comparison of Q3 2026 to Q3 2025 Key Metrics Note: $ in millions, except per share amounts unless noted otherwise. All numbers and percentages rounded. GAAP Non-GAAP Q3-25 Q3-26 Change Y/Y Q3-25 Q3-26 Change Y/Y Total Revenue 137.0 142.6 4.1% 137.0 142.6 4.1% Gross Profit 56.1 62.3 6.2 62.1 68.2 6.1 % Margin 41.0% 43.7% 2.7% 45.3% 47.8% 2.5% Operating Income (Loss) (22.7) (11.0) 11.7 0.1 2.7 2.6 % Margin -16.6% -7.7% 8.9% 0.1% 1.9% 1.8% Net Income (Loss) (55.6) (10.2) 45.4 1.5 3.5 2.0 % Margin -40.6% -7.2% 33.4% 1.1% 2.5% 1.4% Diluted EPS (0.65) (0.12) 0.53 0.02 0.04 0.02 Diluted Shares 85.2 87.7 2.5 86.0 88.1 2.1


 

Make additive work for you Note: $ in thousands unless noted otherwise. All numbers and percentages rounded. GAAP Adjustments Non-GAAP GAAP Adjustments Non-GAAP Gross Profit (1) $ 62,326 $ 5,908 $ 68,234 $ 56,092 $ 5,971 $ 62,063 Operating income (loss) (1,2) (11,012) 13,716 2,704 (22,704) 22,781 77 Net income (loss) (1,2,3) (10,210) 13,683 3,473 (55,634) 57,109 1,475 Net income (loss) per diluted share (4) $ (0.12) $ 0.16 $ 0.04 $ (0.65) $ 0.67 $ 0.02 (1) Acquired intangible assets amortization expenses 4,521 4,526 Non-cash share-based compensation expenses 743 819 Restructuring and other expenses 644 626 5,908 5,971 (2) Acquired intangible assets amortization expenses 1,173 1,068 Non-cash share-based compensation expenses 4,990 4,816 Restructuring and other related costs 1,424 2,639 Revaluation of investment - 2,208 Contingent consideration 151 - Legal and other expenses 70 6,079 7,808 16,810 13,716 22,781 (3) Corresponding tax effect 156 191 Equity method related expenses and impairment - 34,337 Finance expenses (income) (189) (200) $ 13,683 $ 57,109 (4) Weighted average number of ordinary shares outstanding- Diluted 87,732 88,135 85,151 86,000 Three Months Ended September 30, 2026 Three Months Ended September 30, 2025 Appendix – Reconciliation of GAAP to Non-GAAP Results of Operations


 

Make additive work for you Note: $ in thousands unless noted otherwise. All numbers and percentages rounded. Three Months Ended September 30, 2026 2025 Net loss $ (10,210) $ (55,634) Financial income, net (1,120) (2,656) Income tax expenses 318 524 Share in losses of associated companies and impairment - 35,062 Depreciation expenses 5,443 5,085 Amortization expenses 5,701 5,602 Non-cash share-based compensation expenses 5,733 5,635 Revaluation of investment - 2,208 Contingent consideration 151 - Legal and other expenses 438 6,466 Restructuring and other related costs 1,594 2,752 Adjusted EBITDA $ 8,048 $ 5,044 Appendix – Reconciliation of GAAP Net Loss to Adjusted EBITDA


 

Filing Exhibits & Attachments

2 documents

Keep reading