Core Molding Technologies Announces Timing of Its Fiscal 2026 Third Quarter Results

Core Molding Technologies (CMT) will release its fiscal 2026 third-quarter results on November 3, 2026, before the market opens.

Rhea-AI Summary

Core Molding Technologies (CMT) will release its fiscal 2026 third-quarter results on November 3, 2026, before the market opens. The company will hold a conference call that day at 10:00 a.m. Eastern, broadcast live over the internet. A webcast replay will be available shortly after the call, and a telephone replay will be available through November 10.

Key Figures

Results release date: November 3, 2026

Results release date

November 3, 2026

Fiscal 2026 third-quarter results; before the market opens

Key Terms

sheet molding compound, resin transfer molding, dicyclopentadiene, direct long-fiber thermoplastics

4 terms

sheet molding compound technical

"compression molding of sheet molding compound (“SMC”)"

Sheet molding compound (SMC) is a ready-to-mold fiber-reinforced composite material made by layering chopped glass fibers, resin (typically polyester or vinyl ester), fillers, and catalysts between sheets of carrier film; the sandwich is compacted and partially cured into a thick, tacky sheet that is stored on rolls. During manufacturing, heated compression molds shape and complete the cure of SMC into rigid, high-strength parts with good surface finish and consistent thickness, commonly used for automotive body panels, electrical enclosures, and structural components where corrosion resistance, dimensional stability, and repeatable large-volume production are required.

resin transfer molding technical

"resin transfer molding (“RTM”)"

Resin transfer molding is a manufacturing method for making strong, lightweight composite parts by placing dry reinforcing fibers (like cloth or mats) into a closed mold and then pumping liquid resin into the mold so it soaks the fibers and hardens. Think of it like filling a shaped sandwich of fabric with liquid glue that then sets into a rigid piece. It matters to investors because the process affects production speed, part quality, material costs, and scalability for companies that use composites in industries such as aerospace, automotive, and renewable energy.

dicyclopentadiene technical

"liquid molding of dicyclopentadiene (“DCPD”)"

Dicyclopentadiene is a colorless, oily hydrocarbon produced when two cyclopentadiene molecules combine; it is commonly sold as a liquid and can be thermally broken back into cyclopentadiene monomer for chemical manufacturing. It is used as a feedstock in making resins, polymers, adhesives and specialty chemicals, and it is flammable and subject to workplace, transportation and environmental controls because of its volatility and potential health hazards on exposure.

direct long-fiber thermoplastics technical

"direct long-fiber thermoplastics (“DLFT”)"

A class of reinforced plastic materials in which long reinforcing fibres (usually glass or carbon, typically several millimetres to a few centimetres long) are embedded directly into a thermoplastic polymer matrix during compounding or molding. The manufacturing routes feed continuous rovings or pre-formed long-fibre mats into an extruder or injection-molding process so the fibres become dispersed but remain much longer than in standard short-fibre blends, giving higher stiffness, strength and impact resistance than short-fibre thermoplastics while remaining moldable like other thermoplastics. They are distinct from short-fibre thermoplastics (which use much shorter chopped fibres) and from continuous-fibre composites (which use uninterrupted fibre paths), so they occupy an intermediate performance and processing niche.

AI-generated analysis. How Rhea-AI works. Not financial advice.

See more from StockTitan in Google Search and AI answers. Adds StockTitan as a preferred source · opens Google

Add on Google Not now

COLUMBUS, Ohio, Oct. 19, 2026 (GLOBE NEWSWIRE) -- Core Molding Technologies, Inc. (NYSE American: CMT) (“Core Molding”, “Core” or the “Company”), a leading engineered materials company specializing in molded structural products, principally in medium- and heavy-duty trucks, powersports, building products, and industrial and utility industries across North America, today announces that it will release its third quarter fiscal 2026 results on Tuesday, November 3, 2026, before the market opens. In conjunction with the release, the Company has scheduled a conference call, which will be broadcast live over the internet the same day at 10:00am Eastern.

By Phone:	Dial 1-844-881-0134 or 1-412-317-5485 (international) at least 10 minutes before the call and ask to join the Core Molding call. A replay will be available through November 10th by dialing 1-855-669-9658 and using the replay code 1960550.
By Webcast:	Connect to the webcast via the Events and Presentations page of Core Molding’s Investor Relations website at www.coremt.com/investor-relations/events-presentations/. Please log in at least 10 minutes in advance to register and download any necessary software. A replay will be available shortly after the call.

About Core Molding Technologies, Inc.

Core Molding Technologies is a leading engineered materials company specializing in molded structural products, principally in medium- and heavy-duty truck, powersports, building products, industrial and utility industries across North America. The Company operates in one operating segment as a molder of thermoplastic and thermoset structural products. The Company’s operating segment consists of one reporting unit, Core Molding Technologies. The Company offers customers a wide range of manufacturing processes to fit various program volume and investment requirements. These processes include compression molding of sheet molding compound (“SMC”), resin transfer molding (“RTM”), liquid molding of dicyclopentadiene (“DCPD”), spray-up and hand-lay-up, direct long-fiber thermoplastics (“DLFT”) and structural foam and structural web injection molding (“SIM”). Core Molding Technologies serves a wide variety of markets, including medium and heavy-duty trucks, marine, automotive, agriculture, construction, and other commercial products. The demand for Core Molding Technologies’ products is affected by economic conditions in the United States, Mexico, and Canada. Core Molding Technologies’ operations may change proportionately more than revenues from operations.

Company Contact:
Core Molding Technologies, Inc.
Alex Panda
Executive Vice President, Secretary, Treasurer and Chief Financial Officer
apanda@coremt.com

Investor Relations Contact:
Three Part Advisors, LLC
Sandy Martin or Steven Hooser
smartin@threepa.com, shooser@threepa.com
214-616-2207