STOCK TITAN

Core Molding wins $143M in annual new-business awards

Available on EDGAR Accepted by SEC EDGAR Learn about SEC filing dates
(Moderate)

Sentiment and the balance of points

Rhea-AI Sentiment reads the wording of the document, how positive or negative its language is on a 1 to 5 scale. The balance of points shown with the takes weighs what the document actually discloses, so the two can disagree, for example when a trial that missed its main goal is described in upbeat language.

Form Type
8-K

Rhea-AI Filing Summary

Core Molding Technologies (CMT) furnished an investor presentation that Chief Executive Officer Eric Palomaki, Executive Vice President and Chief Financial Officer Alex Panda, and other executives intend to use in investor and analyst conversations. For the trailing 12 months ended September 2026, CMT reported $286 million in revenue, 18.7% gross margin, 5.4% operating margin and $28.815 million in adjusted EBITDA, equal to 10.1% of revenue. 2025 revenue was $274 million, versus $302 million in 2024; adjusted EBITDA was $30.711 million, versus $33.802 million.

The presentation lists $143 million in annual awards from new business won over the prior 30 months, including $116 million in incremental awards. CMT also lists pipeline of $147 million in prospecting and $210 million in quoting or negotiation, measured as annual revenue. Management says it is finalizing a $25 million Mexico footprint expansion in 2026 and lists $30 million in 2026 capital spending; it reports 115,070 shares repurchased during 2026 at an average price of $23.37 per share.

2030 targets include revenue above $500 million, gross margin above 20%, operating income of 10% and ROCE of 16%; these are targets, not reported results.

0 points · 0 major

How this balance works

Rhea-AI gives every point it takes from this document a weight. Minor counts 1, Moderate 3 and Major 9, so one Major point outweighs several Minor ones. The bar adds up the weights on each side, and when neither side holds more than 65% of the total the balance reads Mixed.

It reads the document as published, with the same rules for every company, and it does not look at what the market expected or at how the stock traded, so a point can be objectively good on a day the stock falls.

Rhea-AI Sentiment measures something else, the tone of the wording.

0 major · 2 points

How the balance works

Positive

  • None.

Negative

  • Moderate point2025 revenue declined to $274 million from $302 million in 2024.
  • Moderate point2025 adjusted EBITDA declined to $30.711 million from $33.802 million in 2024.

Filing Explained

The company furnished a presentation reporting $143 million in annual awards, including $116 million incremental; it says $86 million of those incremental awards is not yet launched and lists $7 million of capital still required to support awarded incremental business.

Item 7.01 Regulation FD Disclosure Disclosure
Material non-public information disclosed under Regulation Fair Disclosure, often investor presentations or guidance.
Item 9.01 Financial Statements and Exhibits Exhibits
Financial statements, pro forma financial information, or exhibit attachments filed with this report.
Revenue, TTM ended September 2026 $286 million Trailing twelve months ended September 2026
Adjusted EBITDA, TTM ended September 2026 $28.815 million Trailing twelve months ended September 2026; 10.1% of revenue
Revenue, 2025 $274 million Compared with $302 million in 2024
Revenue, 2024 $302 million Compared with $274 million in 2025
Adjusted EBITDA, 2025 $30.711 million Compared with $33.802 million in 2024
Adjusted EBITDA, 2024 $33.802 million Compared with $30.711 million in 2025
Annual new-business awards $143 million New business won over the prior 30 months
Incremental awards $116 million Part of annual new-business awards
Adjusted EBITDA financial
"Adjusted EBITDA* $15,561 ... TTM Sep 2026 $28,815"
Adjusted EBITDA is a way companies measure how much money they make from their core operations, like running a business, by removing certain costs or income that aren’t part of regular business activities. It helps investors see how well a company is doing without distractions from unusual expenses or gains, making it easier to compare companies or track performance over time.
Non-GAAP financial measures financial
"This presentation includes certain non-GAAP financial measures"
Non-GAAP financial measures are numbers companies use to show their financial performance that exclude certain expenses or income. They help investors see how the company might perform without one-time costs or other unusual items, giving a different perspective from official reports. However, since they can be adjusted, they don’t always tell the full story and should be looked at alongside standard financial figures.
Return on Capital Employed (ROCE) financial
"Return on Capital Employed (ROCE) Reconciliation"
Return on capital employed (ROCE) measures how well a company turns the money invested in its business — both debt and equity used to run operations — into operating profit. Think of it like the return you get from tools a craftsman buys: higher ROCE means the company is using its capital more efficiently to generate earnings, which helps investors compare operational performance and capital allocation quality across firms and industries.
DCPD technical
"DCPD Structural Growth Platform"
USMCA Compliant Products regulatory
"USMCA Compliant Products"
CAGR financial
"approximately 7–8% CAGR globally across end markets"
Compound Annual Growth Rate (CAGR) measures the average yearly growth of an investment, revenue, or other metric over a multi-year period as if it had grown at a steady rate each year. Think of it like the constant speed that would take you from the starting value to the ending value over the same time—useful because it smooths out ups and downs and lets investors compare different assets or performance periods on an even footing.

FAQ

AI-generated questions and answers. How Rhea-AI works. Not financial advice.

What were CMT's revenue and adjusted EBITDA for the TTM ended September 2026?

For the trailing 12 months ended September 2026, CMT reported $286 million in revenue and $28.815 million in adjusted EBITDA, equal to 10.1% of revenue. Gross margin was 18.7% and operating margin was 5.4%.

How did CMT's revenue and adjusted EBITDA compare in 2025 with 2024?

CMT reported $274 million in 2025 revenue, compared with $302 million in 2024. Adjusted EBITDA was $30.711 million in 2025, compared with $33.802 million in 2024.

AI-generated analysis. How Rhea-AI works. Not financial advice.

See more from StockTitan in Google Search and AI answers. Adds StockTitan as a preferred source · opens Google
Add on Google
0001026655false00010266552026-11-172026-11-17

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549 

FORM 8-K
 

CURRENT REPORT
Pursuant to Section 13 or 15(d)
of the Securities Exchange Act of 1934
Date of Report (Date of earliest event reported): November 17, 2026
 

Core Molding Technologies, Inc.
(Exact name of registrant as specified in its charter)
 
Delaware
001-12505
31-1481870
(State or other jurisdiction
incorporation or organization)
(Commission File Number)
(I.R.S. Employer Identification No.)
800 Manor Park Drive, Columbus, Ohio
43228-0183
(Address of principal executive office)
(Zip Code)
Registrant’s telephone number, including area code: (614) 870-5000
(Former name or former address if changed since last report.)
 

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:
 
Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)
 
Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)
 
Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))
 
Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))
Securities registered pursuant to Section 12(b) of the Act:





Title of each classTrading Symbol(s)Name of each exchange on which registered
Common Stock, par value $0.01CMTNYSE American LLC
Preferred Stock purchase rights, par value $0.01N/ANYSE American LLC

Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§ 230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§ 240.12b-2 of this chapter). Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act ☐



Item 7.01Regulation FD Disclosure.
Core Molding Technologies, Inc. (the "Company") announced on November 17, 2026 Eric Palomaki, Chief Executive Officer; Alex Panda, Executive Vice President and Chief Financial Officer, and other members of the executive management team intend to use the presentation attached hereto from time to time in conversations with investors, analysts and others.

A copy of the slides forming the basis of the presentation is attached hereto as Exhibit 99.1 and are incorporated herein by reference. Such slides are also available in the Investor Relations section of the Company's web site at www.coremt.com.

The slides are being furnished pursuant to Item 7.01, and the information contained therein shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, or otherwise subject to the liabilities under that Section. Furthermore, the information contained in the slides shall not be deemed to be incorporated by reference into the filings of the Company under the Securities Act of 1933, as amended.

Item 9.01Financial Statement and Exhibits.
(d) Exhibits

Exhibit NumberDescription
99.1
Investor Presentation



SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

CORE MOLDING TECHNOLOGIES, INC.
Date: November 17, 2026By:
/s/ Alex J. Panda
Name:
Alex J. Panda
Title:Executive Vice President, Treasurer, Secretary and Chief Financial Officer





Investor Presentation Since 1996 Dallas IDEAS Conference November 2026


 

Safe Harbor Statements and Non-GAAP Financial Measures Certain statements in this Annual Report on Form 10-K constitute forward-looking statements within the meaning of the federal securities laws, which are subject to the "safe harbor" created by Section 27A of the Securities Act of 1933, as amended (the "Securities Act"), and Section 21E of the Securities Exchange Act of 1934, as amended (the "Exchange Act"). As a general matter, forward-looking statements are those focused upon future plans, objectives or performance as opposed to historical items and include statements of anticipated events or trends and expectations and beliefs relating to matters not historical in nature. Such forward-looking statements involve known and unknown risks and are subject to uncertainties and factors relating to Core Molding Technologies' operations and business environment, all of which are difficult to predict and many of which are beyond Core Molding Technologies' control. Words such as “may,” “will,” “could,” “would,” “should,” “anticipate,” “predict,” “potential,” “continue,” “expect,” “intend,” “targets,” “plans,” “projects,” “believes,” “estimates,” “encouraged,” “confident” and similar expressions are used to identify these forward-looking statements. These uncertainties and factors could cause Core Molding Technologies' actual results to differ materially from those matters expressed in or implied by such forward-looking statements. Core Molding Technologies believes that the following factors, among others, could affect its future performance and cause actual results to differ materially from those expressed or implied by forward-looking statements made in this presentation: business conditions in the plastics, transportation, power sports, utilities and commercial product industries (including changes in demand for truck production); federal and state regulations (including engine emission regulations); general economic, social, regulatory (including foreign trade policy) and political environments in the countries in which Core Molding Technologies operates; changes in U.S. trade policy, including tariffs and related foreign relations; the adverse impact of coronavirus (COVID-19) global pandemic on our business, results of operations, financial position, liquidity or cash flow, as well as impact on customers and supply chains; safety and security conditions in Mexico; fluctuations in foreign currency exchange rates; disruptions in financial markets and the availability and cost of credit; dependence upon certain major customers as the primary source of Core Molding Technologies’ sales revenues; efforts of Core Molding Technologies to expand its customer base and replace lost or transitioning programs; the cyclical nature of the industries and markets we serve; the ability to develop new and innovative products and to diversify markets, materials and processes and increase operational enhancements; ability to accurately quote and execute manufacturing processes for new business; the actions of competitors, customers, and suppliers; failure of Core Molding Technologies’ suppliers to perform their obligations; the availability and pricing of raw materials, including supply chain disruptions and inflationary pressures; long-term fixed price customer contracts; labor relations, labor availability and competition for skilled workers, as well as possible work stoppages or labor disruptions at one or more of our union locations or one of our customer or supplier locations; the loss or inability of Core Molding Technologies to attract and retain key personnel; risks associated with foreign operations in Mexico and Canada; the ability to successfully identify, evaluate and manage potential acquisitions and strategic initiatives; federal, state and local environmental laws and regulations; climate change, weather severity and energy prices; the availability of sufficient capital; the ability of Core Molding Technologies to provide on-time delivery to customers, which may require additional shipping expenses to ensure on-time delivery or otherwise result in late fees and other customer charges; risk of cancellation, delay or change in scope of orders or projects; inadequate insurance coverage to protect against potential hazards; equipment and machinery failure; product liability, recall and warranty claims; the inability to protect proprietary information and intellectual property rights; risks associated with the use of artificial intelligence in our business and operations; cybersecurity incidents; our ability to maintain effective internal control over financial reporting and comply with debt covenants; impairment charges related to goodwill or other intangible assets; tax policy changes or adverse tax audits; stock price volatility; and other risks identified from time to time in Core Molding Technologies’ other public documents on file with the Securities and Exchange Commission, including those described in Item 1A of the December 31, 2025 Annual Report on Form 10-K. This presentation includes certain non-GAAP financial measures to describe our performance. The reconciliation of those measure to GAAP measures are provided within the appendix of the presentation. Those disclosures should not be viewed as a substitute for operating results determined in accordance with GAAP, nor are they necessarily comparable to non-GAAP performance measures that may be presented by other companies. Core Molding Technologies 2November 2026


 

Key Takeaways – Why Core, Why Now November 2026Core Molding Technologies 3 Growth is becoming more visible. Our wins over the last 3 years speak for themselves; we will share why our winning will continue and scale. Core’s operating transformation is proven. Our recent history of turning around operations, driving continuous improvement, and executing what we say we are going to do. Scale will improve earnings quality. Our decline in revenues has left us with above average overhead cost structure, the path to $500M will include economies of scale. Capital allocation is governed by returns. Organic growth is the priority, and we are having success. We govern all capital projects by focusing on Return on Capital Employed (ROCE). Management is giving investors a measurable scorecard. Future progress will be evaluated through production-revenue conversion, margin, cash generation, ROCE, diversification, and customer concentration.


 

Why Invest in Core Molding Technology November 2026Core Molding Technologies 4 45+ Years of Award Winning Manufacturing Excellence Competitive Moat, Sole Sourced, High Barriers to Entry Large, Diverse Addressable Markets Long-term Relationships w/ Blue-chip Companies Specialized Ultra Large Molding Capability Disciplined Capital Investment Approach Organic Growth and Recent New Wins Improving Gross Margin Trend Despite Challenging Cycle


 

Our Large North American Manufacturing Footprint November 2026Core Molding Technologies 5 >1.3M Square Feet 83 Presses Presses up to 5500 Ton USMCA Compliant Products Columbus, OH Cobourg, Ontario Winona, MN Gaffney, SC Matamoros, MX Monterrey, MX Columbus, OH | Materials and SMC Compounding Gaffney, SC | Hood and Battery Systems Winona, MN | Automotive, Infrastructure, Diversified Products Cobourg, ON | Engineered Solutions & Specialty Products Matamoros, MX | Large Scale Composite Manufacturing Monterrey, MX | DCPD Structural Growth Platform


 

Culture & Execution: Building the Behaviors November 2026Core Molding Technologies 6 Culture Becomes Real When Standards are Reinforced Through Everyday Leadership One-on-One Meetings Align priorities and development Feedback & Coaching Reinforce expectations and performance Recognition Promote desired behaviors Accountability Drive ownership and results Development Strengthen future leadership capacity


 

Our “Must Win Battle” Transformation Journey November 2026Core Molding Technologies 7 Operational • Fix(repair) equipment Financial • Bank refinancing Organizational • Getting the right people on the bus Customers • Maintain customers Organizational • “Great Place to Work” initiative Organizational • Leadership Development 2 • Internal promotion program Diversification • New, growing end markets Operational • Standardize the basics Dig out | Back to Basics Leverage Improvements Sales Expansion | Investments 2019/2020 Turnaround 2021 Product Focused 2022/2023 Institutionalize Operating Systems 2024—2026 Invest For Growth Pricing • Fix or get out pricing • Strategic contract adjustments Operational • Continuous improvement system, process optimization Capital Investments • MTY Expansion • MAT Sleeper Roof Organizational • Front Line Leadership Development • Technical skill development Sales & Marketing • Hired Chief Commercial Officer • Wallet share expansion Growth • Organic growth investment • Footprint optimization(s) • New customers/new markets 0.0% 5.0% 10.0% 15.0% 20.0% 2019 2020 2021 2022 2023 2024 2025 2026 Q3 TTM Gross Margin % Culture as a Competitive Advantage Innovation | Diversification


 

0.0% 3.0% 6.0% 9.0% 12.0% 15.0% $- $10 $20 $30 $40 $50 2021 2022 2023 2024 2025 2026Q3 TTM Adjusted EBITDA and Margin* Adj. EBITDA EBITDA Margin Takeaway • EBITDA margin from ~8% to ~11% through declining revenue • Maintaining margin percentage despite declining revenue; we anticipate economies of scale as revenue increases back to the $300M+ Building a Better Business Through the Cycle November 2026Core Molding Technologies 8 *Adjusted EBITDA and Adjusted EBITDA Margin are Non-GAAP measures. See Appendix for reconciliations. Margins improved from 8.7% to 11.2% in 2025 $307 $377 $358 $302 $274 $286 2021 2022 2023 2024 2025 2026 Q3 TTM Revenue (in millions)


 

Strategic and Purposeful Diversification – Reduce the Cyclicality November 2026Core Molding Technologies 9 91% 44% 28% 5% 27% 16% 10% 14% 10% 22% 4% 9% 20% 0% 25% 50% 75% 100% 2011 2025 2030E Product Sales by Industry Truck Power Sports Building Products Utilities Other • Reduced cyclicality by balancing exposure across multiple end markets and demand cycles. • Improve asset utilization by filling capacity with a broader mix of programs and customers. (~65% of new wins) • Expanding growth opportunities through access to larger, faster growing markets. • Lower concentration risk by reducing dependance on any single customer, market, or geography. • Enhance earning quality through more predictable revenue, stronger returns, and high value potential. Takeaway A stronger, more diversified Core Molding Technologies results in a more resilient engineered solutions business.


 

Footprint Optimization - 2026 November 2026Core Molding Technologies 10 Remaining Q4/Q1 • Complete grid battery launch • Win 1 additional grid battery project under quote phase. 2026 Changes Q1 - Q3 • Installed 2 hood projects • Installed 2 battery projects • Prepared for new grid battery Truck Hood and Batteries Large and Ultra Large Composites Low Pressure Injection, DCPD, Topcoat Gaffney, SC Columbus, OH Matamoros, MX Monterrey, MX Center(s) of Excellence SMC Compounding Remaining Q4/Q1 • Complete 1 additional project relocation • Launch 2 new SMC compound projects 2026 Changes Q1 - Q3 • Removed 2 hood projects • Removed 2 battery projects • Simplified 3 smaller molding projects moved to GAF/MAT Remaining Q4/Q1 • Finish 2 new 4500t presses • Install new roof assembly lines for Q2 launch 2026 Changes Q1 - Q3 • Add 50k square feet storage • Add 30k square feet of production • Add 2 new 4500t molding presses • Relocate DCPD out to MTY 2026 Changes Q1 - Q3 • Build and prepare new 214k square foot facility • Close/combine external warehouse into new facility • Installed 3 DCPD presses and all production from MAT • Installed 6 LPIM machines and related processes • Exit previous leased facility


 

Addressable Market = Engines of Growth November 2026Core Molding Technologies 11 Opportunities for North American Growth Across Diverse Industries Composites Industry Growth • Composite materials are growing at approximately 7–8% CAGR globally across end markets • Conversion of wood, concrete, and metal to composites continues to allow composites to expand Traditional Truck and Powersports • Continue to win based on our strengths • Mexico investments make us stronger • Focus on cross-selling technologies among existing customers • Quote and win where we have a competitive advantage Utilities and Building Products • Focus and grow Utilities like buried vaults • Grow building products replacing wood • Electrical enclosures are a great application • Grid hardening batteries for electrical infrastructure Takeaway We are in an industry that rewards solutions using our unique competitive advantage associated with large and ultra-large composite parts. Construction & Agriculture ($0.5—24B) Powersports / Off Highway ($1—2B) Building Products ($5—40B) Heavy Truck / Transportation ($8—10B) Industrial & Utilities ($8—12B) Aerospace / Defense ($1—10B) Broad Market Opportunities


 

Large & Ultra-large Molding Solutions November 2026Core Molding Technologies 12 Truck Powersports Building Products Utilities Why Customers Choose Core Light Weighting Corrosion Resistance Parts Consolidation Large Part — Durability Cost Savings Recyclability


 

November 2026Core Molding Technologies 13 New and Expansion of Industry Verticals Automotive Parts Refuse Truck Body Medical Applications EV Battery Enclosures SMC and Topcoat Paint Aerospace Solutions


 

Current Pipeline Summary November 2026Core Molding Technologies 14 PIPELINE BREAKDOWN Prospecting $147M Quoting/Negotiating $210M $83M* *Award amount based on historical win rates (annual revenue) IDENTIFIED TARGET PROJECTS 61 Projects Actively Pursuing $147M in Annual Revenue CURRENT PIPELINE 31 Projects in Quote Process $210M in Annual Revenue $1.4B+ Total Revenue Over Program Lives


 

What Core Has Organically Won November 2026Core Molding Technologies 15 11% 16% 22% 23% 28% Other Powersports Industrials/Utilities Truck Building Products 0% 5% 10% 15% 20% 25% 30% Net New Business Mix $28 $23 $19 $5 $11 Truck Industrials/ Utilities Building Products Powersports Other $- $10 $20 $30 $40 $50 $60 $70 $80 $90 $100 Sales by Industry for Pending Program Launches *Over past 30 months $143M* Annual Awards Total new business won $116M* Incremental Awards 81% of total awards $86M* Not Yet Launched 75% of incremental awards 90%* Launching Soon Within next 12 months $7M Remaining Capital Required Support awarded incremental business


 

Capital Allocation Priorities November 2026Core Molding Technologies 16 Multifaceted Allocation Strategy to Maximize Shareholder Value Maintain Strong Balance Sheet • Zero net debt – Cash balance of $5M as of September 2026 • Current leverage ratio of less than one times Adjusted EBITDA • Available liquidity flexibility to take advantage of opportunities Organic Growth • Capital investments target above 14% ROCE • Projected sustaining capital spend 3.0%–3.5% of product sales • Finalizing $25M expansion of Mexico manufacturing footprint in 2026 • Total capex of $30M spend during 2026 M&A • Focus on businesses that diversify end markets and provide meaningful earnings and cash flow accretion • Pursue acquisitions that meet disciplined financial criteria, including achieving at least a 14% return on capital employed and a conservative leverage ratio less than 2.5x by year two of any acquisition Return Capital to Shareholders • Share repurchase is preferred method • In March 2026 increased share repurchase program $6.5M (Total $7.5M planned) • During 2026 repurchased 115,070 shares at average $23.37 share price


 

November 2026Core Molding Technologies 17 Strategic Organic Growth – Mexico Monterrey • Increased footprint by 400% to 214,000ft2 • Consolidated 30,000ft2 warehouse resulting in $0.5 million savings (Full effect Q4 of 2026) • Added topcoat paint to enable full-service supply and the pursuit of products for Construction and Agriculture industries​ • Improved DCPD throughput by 50% (Full effect Q4 of 2026) Matamoros • Two new state-of-the-art 4,500-ton presses with automatic unloading. Heavily automated secondary processes for new sleeper cab launch. (Sales begin Q1/Q2 of 2027) • Additional 50,000 square feet of manufacturing space, 50,000 square feet of rack storage, and addition unloading docks. • Transferred a molding process to Monterrey providing logistic synergies of $1 million. (Full effect Q4 of 2026) Disciplined investments achieving greater than 14% ROCE


 

Margin Enhancement Opportunities November 2026Core Molding Technologies 18 400-basis point improvement opportunity is driven by a combination of volume leverage and strategic business enhancements that are in our growth strategy. Gross Margin 17%–19% Improved Leverage 200 bps Improved Mix/Efficiency 200 bps Target Gross Margin 21%–23%


 

Acquisition Strategy Acquisition Criteria Diversify End Markets Strengthen Margin Profile Increase Process Portfolio Expand Customer Base Financial Criteria $50M – $100M Revenue 2.0x – 2.5x Leverage Ratio In Year Two 14%+ Return on Invested Capital In Year Two 6x – 8x EBITDA Strategic Criteria Impact of a $100 Million Sales Acquisition Largest Customer % of Annual Product Sales Truck End Market % of Annual Product Sales Revenue Scale Annual Product Sales 2025 Pro Forma 19% 44% $232M 13% 30% $332M November 2026Core Molding Technologies 19


 

Long Term Financial Goals November 2026Core Molding Technologies 20 Our 2030 Financial Targets Revenues >$500M • Organic growth • Acquisitions • Truck cycle recovery Gross Margin >20% • Better product mix • Higher plant utilization • Mexico cost advantage Operating Income 10% • Operational improvements • Value selling • Leverage fixed costs Return on Capital Employed 16% • Investment in automation/capacity • Leverage already installed capacity • Working Capital Management


 

Appendix


 

Selected Financial Information November 2026Core Molding Technologies 22 2026 Q3 Trailing Twelve Months ● Sales decline due to portfolio optimization and demand declines in the Company’s top industries (truck and powersports) ● Starting to sales increase as new programs launch and truck demand improves ● Company focus on operational improvements driving higher earnings ● Consistent Gross Margins between 17%–19% of sales ● Poised to take advantage of future demand rebound and launch of new programs $377 $358 $302 $274 $286 $0 $50 $100 $150 $200 $250 $300 $350 $400 2022 2023 2024 2025 TTM Sep 2026 Total Sales(1) 13.9% 18.0% 17.6% 17.4% 18.7% 4.8% 7.4% 5.9% 5.9% 5.4% 0% 5% 10% 15% 20% 2022 2023 2024 2025 TTM Sep 2026 Adjusted Margins(2) Gross Margin Operating Margin (1) Amounts in millions. (2) Adjusted EBITDA and Adjusted Margin are non-GAAP financial measure as defined and reconciled later in this presentation. $31.9 $42.9 $33.8 $30.7 $29.0 0.0% 5.0% 10.0% 15.0% $0 $10 $20 $30 $40 $50 2022 2023 2024 2025 TTM Sep 2026 Adjusted EBITDA(1)(2) Adj EBITDA EBITDA %


 

Selected Financial Information November 2026Core Molding Technologies 23 2026 Q2 Trailing Twelve Months ● Significant increase in growth capex. $28 million over last 12 months ● Disciplined capital deployment approach focused on increasing ROCE ● Excluding ~ $5M of accumulated cash to be redeployed, 2026 ROCE = 9.4% $19 $35 $35 $19 $0 $5 $10 $15 $20 $25 $30 $35 $40 2022 2023 2024 2025 TTM Sep 2026 Operating Cash Flow(1) $17 $9 $12 $17 $28 $0 $5 $10 $15 $20 $25 $30 2022 2023 2024 2025 TTM Sep 2026 Capital Investment(1) (1) Amounts in millions. (2) Adjusted ROCE and Operating Cash Flow are non-GAAP financial measures as defined and reconciled later in this presentation (3) ROCE excluding accumulated cash 12.7% 16.4% 10.7% 9.0% 9.1% 0% 2% 4% 6% 8% 10% 12% 14% 16% 18% 2022 2023 2024 2025 TTM Sep 2026 Adj Return on Capital Employed (ROCE)(2) 14.2%(3) 11.5%(3) 9.4%(3) $8(2)


 

Net Income (Loss) to Adjusted EBITDA Reconciliation November 2026Core Molding Technologies 24 (1) Includes net interest expense, non-cash periodic post retirement costs and loss on extinguishment of debt. (2) Reflects facility closure, Mexico Expansion and severance payments. Reconciliation of GAAP to Non-GAAP Financial Measures * Adjusted EBITDA represents net income before, as applicable from time to time, (i) interest expense, net, (ii) provision (benefit) for income taxes, (iii) depreciation and amortization of long-lived assets, (iv) share based compensation expense, (v) non-reoccurring charges including restructuring costs, plant closure costs, goodwill impairment charges, (vi) nonrecurring legal settlement costs and associated legal expenses unrelated to the Company's core operations. This metrics is a supplemental measures of our operating performance that are neither required by, nor presented in accordance with, GAAP. This measure has limitations as an analytical tool and should not be considered in isolation or as an alternative to performance measure derived in accordance with GAAP as an indicator of our operating performance. We present Adjusted EBITDA because management uses this measure as key performance indicators, and we believe that securities analysts, investors and others use this measure to evaluate companies in our industry. Our calculation of this measure may not be comparable to similarly named measures reported by other companies. The above table presents a reconciliation of net income (loss), the most directly comparable measure calculated in accordance with GAAP, to Adjusted EBITDA for the periods presented. In thousands Twelve Months Ended December 31, 2017 2018 2019 2020 2021 2022 2023 2024 2025 TTM Sep 2026 Net income (loss) $ 5,549 $ (4,782) $ (15,223) $ 8,165 $ 4,671 $ 12,203 $ 20,324 $ 13,299 $ 11,195 $ 6,894 Income tax expense (benefit) $ 2,286 $ (664) $ (355) $ (3,618) $ 4,248 $ 2,382 $ 5,422 $ 4,182 $ 3,482 $ 1,556 Other expenses(1) $ 245 $ 2,394 $ 4,144 $ 5,923 $ 2,149 $ 3,418 $ 791 $ (786) $ (459) $ (209) Depreciation and amortization $ 6,240 $ 9,384 $ 10,376 $ 10,775 $ 11,130 $ 11,603 $ 12,831 $ 13,318 $ 12,830 $ 12,000 Share-based compensation $ 1,331 $ 1,743 $ 1,564 $ 1,355 $ 1,886 $ 2,329 $ 2,923 $ 2,495 $ 1,788 $ 1,666 Goodwill impairment $ - $ 2,403 $ 4,100 $ - $ - $ - $ - $ - $ - $ - Facility closure, Mexico Expansion and severance costs(2) $ - $ - $ - $ - $ 2,581 $ - $ 570 $ 1,294 $ 1,875 $ 6,908 Adjusted EBITDA* $ 15,561 $ 10,478 $ 4,606 $ 22,600 $ 26,665 $ 31,935 $ 42,861 $ 33,802 $ 30,711 $ 28,815 Adjusted EBITDA % of Revenues 9.1% 3.9% 1.6% 10.2% 8.7% 8.5% 12.0% 11.2% 11.2% 10.1%


 

1 Year-End and Return on Capital Employed (“ROCE”) Reconciliation November 2026Core Molding Technologies 25 Reconciliation of GAAP to Non-GAAP Financial Measures * Return on Capital Employed represents net income before, as applicable from time to time, (i) interest expense, net, (ii) provision (benefit) for income taxes, (iii) restructuring and plant closure costs, (iv) nonrecurring legal settlement costs and associated legal expenses unrelated to the Company's core operations divided by Total Capital Employed which includes (i) Shareholders’ Equity, (ii) term debt, and (iii) revolving debt. This metrics is a supplemental measure of our operating performance that are neither required by, nor presented in accordance with, GAAP. This measure has limitations as an analytical tool and should not be considered in isolation or as an alternative to performance measure derived in accordance with GAAP as an indicator of our operating performance. We present ROCE because management uses this measure as key performance indicators, and we believe that securities analysts, investors and others use these measures to evaluate companies in our industry. Our calculation of this measure may not be comparable to similarly named measures reported by other companies. 2021 2022 2023 2024 2025 TTM Sep 2026 2025 TTM Sep 2026 in thousands in thousands EBIT $ 11,068 $ 18,003 $ 26,537 $ 16,695 $ 14,218 $ 8,241 EBIT $ 14,218 $ 8,241 Plant Closure, Mexico Expansion and Severance Costs(1) $ 2,581 $ - $ - $ 1,294 $ 1,875 $ 6,908 Plant Closure and Severance Costs(1) $ 1,875 $ 6,908 Adjusted EBIT $ 13,649 $ 18,003 $ 26,537 $ 17,989 $ 16,093 $ 15,149 Adjusted EBIT $ 16,093 $ 15,149 December31, 2021 2022 2023 2024 2025 Sep 30, 2026 2025(2) TTM Sep 2026(2) Shareholders' Equity $ 100,095 $ 116,125 $ 138,953 $ 147,361 $ 158,171 $ 161,147 Shareholders' Equity $ 158,171 $ 161,147 Debt Debt Short Term Portion of Term Debt/Revolver 3,943 1,208 1,468 1,814 2,075 4,810- Short Term Portion of Term Debt/Revolver 2,075 4,810 Long Term Portion of Term Debt 21,251 22,986 21,519 19,706 17,639 - Long Term Portion of Term Debt 17,639 - Accumulated Cash (38,058) (5,437) Total Capital Employed $ 129,713 $ 142,183 $ 161,940 $ 168,881 $ 177,885 $ 165,957 Total Capital Employed $ 139,827 $ 160,520 ROCE 10.5% 12.7% 16.4% 10.7 9.0% 9.1% ROCE 11.5% 9.4% (1) Reflects Cincinnati facility closing and severance costs (2) ROCE excluding accumulated cash


 

Class 8 Truck Market Forecast / Overview – From ACT November 2026Core Molding Technologies 26 0 50,000 100,000 150,000 200,000 250,000 300,000 350,000 400,000 20 05 20 06 20 07 20 08 20 09 20 10 20 11 20 12 20 13 20 14 20 15 20 16 20 17 20 18 20 19 20 20 20 21 20 22 20 23 20 24 20 25 Annual Class 8 Truck Production (units) - per ACT Actual Build Rates – units/year Highlights based on latest ACT Report: - EPA’27 cost increases on horizon, an aging fleet, production has increased through out the year, and near-term class 8 forecasts indicate 8% increase in 2027 over 2026. (Expect EPA final ruling in Nov.) - Diesel prices, interest rates, and improving freight rates provide a potential for upside, in contrast with supply chain challenges limiting output. - Medium duty truck (not shown in charts) expected to be down 4% in 2027 over 2026 production. Yellow bar represents average vehicle production April 2026 – Forecast from earlier this year. November 2026 – Forecast from recent month.


 

November 2026Core Molding Technologies 27 Contacts Company Contact Alex Panda Chief Financial Officer apanda@coremt.com Investor Contact Sandy Martin / Steven Hooser Three Part Advisors 214.616.2207


 

Filing Exhibits & Attachments

4 documents

Keep reading