GoldMining Discovers Gold and Copper Mineralization in Drilling 1 km from the São Jorge Deposit, Brazil
GoldMining (NYSE American: GLDG) reported final diamond drill assays and interim auger results from the São Jorge project, Pará, Brazil on Nov 4, 2025. Step-out core holes SJD-123-24 and SJD-124-24 identified new mineralization ~1 km northwest of the São Jorge deposit, including 10 m at 0.66 g/t Au (SJD-123-24) and 28 m at 275 ppm Cu (SJD-124-24). Earlier core hole SJD-120-24 returned a long intercept of 163 m at 1.02 g/t Au. An ongoing 3,000 m auger program (≈2/3 complete) at the William South target (~2 km north) delivered multiple high-grade bedrock auger hits, including 1 m at 17.14 g/t Au and ~25% of holes >100 ppb Au, supporting a bedrock source beneath large soil anomalies. Company states follow-up deeper drilling is warranted to confirm and expand discoveries.
GoldMining (NYSE American: GLDG) ha riportato i dati finali dei saggi di trivellazione con diamante e i risultati intermedi delle perforazioni ad elica dal progetto São Jorge, Pará, Brasile, il 4 novembre 2025. Le perforazioni di conferma SJD-123-24 e SJD-124-24 hanno identificato una nuova mineralizzazione a circa 1 km a nord-ovest della giacitura São Jorge, tra cui 10 m a 0,66 g/t Au (SJD-123-24) e 28 m a 275 ppm Cu (SJD-124-24). In precedenza la perforazione SJD-120-24 aveva riportato un intercetto lungo di 163 m a 1,02 g/t Au. Un programma di trivellazioni ad elica in corso di 3.000 m (circa 2/3 completato) presso l’obiettivo William South (~2 km a nord) ha fornito molteplici hit ad alta gradazione nel bedrock, tra cui 1 m a 17,14 g/t Au e circa il 25% dei fori con >100 ppb Au, supportando una fonte nel bedrock al di sotto di grandi anomalie del suolo. L’azienda afferma che ulteriori trivellazioni più profonde sono giustificate per confermare ed espandere le scoperte.
GoldMining (NYSE American: GLDG) informó los datos finales de sismos de diamante y resultados interinos de sondeos con barrena (auger) del proyecto São Jorge, Pará, Brasil, el 4 de noviembre de 2025. Los hoyos SJD-123-24 y SJD-124-24 identificaron nueva mineralización a ~1 km al noroeste del yacimiento São Jorge, incluyendo 10 m a 0,66 g/t Au (SJD-123-24) y 28 m a 275 ppm Cu (SJD-124-24). Anteriormente, el hoyo SJD-120-24 mostró una intercepción larga de 163 m a 1,02 g/t Au. Un programa de auger de 3.000 m (aprox. 2/3 completado) en el objetivo William South (~2 km al norte) entregó múltiples hits de alta ley en roca bedrock, incluyendo 1 m a 17,14 g/t Au y ~25% de los hoyos >100 ppb Au, respaldando una fuente de roca madre bajo grandes anomalías de suelo. La compañía indica que se justifica un seguimiento con perforación más profunda para confirmar y ampliar los descubrimientos.
GoldMining (NYSE American: GLDG)은 2025년 11월 4일 브라질 파라 주의 상조르주(São Jorge) 프로젝트에서 다이아몬드 드릴 샘플의 최종 데이터와 앵거(augur) 중간 결과를 발표했습니다. 확장 코어 구멍 SJD-123-24와 SJD-124-24는 상조르주 광맥에서 북서쪽 약 1km 떨어진 새로운 광물화를 확인했으며, 포함된 내용은 10 m at 0.66 g/t Au (SJD-123-24)와 28 m at 275 ppm Cu (SJD-124-24)입니다. 이전 코어 구멍 SJD-120-24는 163 m at 1.02 g/t Au의 긴 인터섹트를 보였습니다. 약 3,000 m의 앵거 프로그램(약 2/3 완료)이 윌리엄 사우스 표적지(북쪽으로 약 2 km)에서 진행 중이며, 기반암에서 다수의 고등급 타격을 기록했고, 1 m at 17.14 g/t Au 및 전체 구멍의 약 25%가 <100 ppb Au 이상로 나타나 큰 토양 이상 아래의 기반암 원천을 뒷받침합니다. 회사는 발견을 확인하고 확장하기 위해 더 깊은 시추를 수행할 필요가 있다고 밝혔습니다.
GoldMining (NYSE American: GLDG) a publié les résultats finaux des carottages diamant et les résultats intermédiaires des forages par tarière (auger) du projet São Jorge, Pará, Brésil, le 4 novembre 2025. Les forages de reconnaissance SJD-123-24 et SJD-124-24 ont identifié une nouvelle minéralisation à environ 1 km au nord-ouest du gisement São Jorge, comprenant 10 m à 0,66 g/t d'Au (SJD-123-24) et 28 m à 275 ppm Cu (SJD-124-24). Précédemment, le forage SJD-120-24 a donné une interception longue de 163 m à 1,02 g/t d'Au. Un programme d’auscultation par tarière de 3 000 m (environ les deux tiers achevés) sur la cible William South (~2 km au nord) a livré plusieurs impacts importants sur le bedrock, dont 1 m à 17,14 g/t d'Au et environ 25 % des trous >100 ppb d'Au, soutenant une source dans le bedrock sous d’importantes anomalie de sol. La société indique que des forages plus profonds de suivi sont justifiés pour confirmer et étendre les découvertes.
GoldMining (NYSE American: GLDG) berichtete am 4. November 2025 endgültige Diamantbohrdaten und vorläufige Resultate der Bohrungen mit Auger vom São Jorge-Projekt, Pará, Brasilien. Die Step-out-Kernbohrungen SJD-123-24 und SJD-124-24 identifizierten neue Mineralisierung ca. 1 km nordwestlich des São Jorge-Lagerstätts, darunter 10 m bei 0,66 g/t Au (SJD-123-24) und 28 m bei 275 ppm Cu (SJD-124-24). Zuvor zeigte der Kernbohrloch SJD-120-24 eine lange Intercept von 163 m bei 1,02 g/t Au. Ein laufendes 3.000 m Auger-Programm (ca. 2/3 abgeschlossen) am William South-Ziel (~2 km nördlich) lieferte mehrere hochgradige Treffer im Felsuntergrund, darunter 1 m bei 17,14 g/t Au und ca. 25% der Bohrlöcher >100 ppb Au, was eine Quelle im Fels unter großen Bodenanomalien unterstützt. Das Unternehmen erklärt, dass weitere Tiefbohrungen sinnvoll sind, um die Entdeckungen zu bestätigen und zu erweitern.
GoldMining (NYSE American: GLDG) أعلنت عن النتائج النهائية لعينات الحفر الماسي والنتائج المتوسطة للحفر بالإزميل (auger) من مشروع ساو جورج، بارا، البرازيل في 4 نوفمبر 2025. حددت حُفَر التوسع SJD-123-24 وSJD-124-24 وجوداً معدنياً جديداً حوالي 1 كم شمال غرب تركيبة ساو جورج، بما في ذلك 10 m عند 0.66 g/t من الذهب (SJD-123-24) و28 m عند 275 ppm Cu (SJD-124-24). أظهرت الحفرة الأساسية السابقة SJD-120-24 امتصاصاً طويلاً قدره 163 m عند 1.02 g/t من الذهب. برنامج حفر بالإزميل بطول 3,000 م (حوالي ثلثيه مكتمل) عند الهدف William South (على بعد نحو 2 كم إلى الشمال) أفرز عدة ضربات عالية الجودة للصخر الأساس، من بينها 1 m عند 17.14 g/t من الذهب ونحو 25% من الحفر >100 ppb من الذهب، مما يدعم وجود مصدر في الصخور الأساسية تحت شواذ التربة الكبيرة. تشير الشركة إلى أن التتبّع بحفر أعمق أمر مبرر لتأكيد وتوسيع اكتشافاتها.
- Step-out core: 10 m at 0.66 g/t Au (SJD-123-24)
- Step-out core: 28 m at 275 ppm Cu (SJD-124-24)
- Long core intercept: 163 m at 1.02 g/t Au (SJD-120-24)
- Auger highs: 1 m at 17.14 g/t Au and multiple >100 ppb Au
- ~25% of William South auger holes >100 ppb Au
- Current diamond drilling limited: 1,077 m over five holes
- Auger method open-hole: possible contamination/dilution of assays
- Copper anomaly interpreted as hydromorphic dispersion, source unconfirmed
- Only ~1/3 of auger assays received; program incomplete
Insights
Step-out core and auger drilling returned bedrock gold and anomalous copper up to 1 km from the São Jorge deposit, supporting further follow-up drilling.
Diamond core holes SJD-123-24 and SJD-124-24 intersected new mineralization about 1 km northwest of the existing São Jorge deposit, with SJD-123-24 returning 10 m at 0.66 g/t Au (including 2 m at 1.65 g/t Au) and SJD-124-24 returning 28 m of anomalous copper at 275 ppm Cu. Earlier confirmatory holes include a long interval of 163 m at 1.02 g/t Au in SJD-120-24, which demonstrates continuity of significant grade within the project area.
The auger program at the William South target (~2 km north) reported that ~25% of 101 holes exceed 100 ppb (0.1 g/t) Au, and isolated 1 m bedrock auger samples reached up to 17.14 g/t Au. These auger results indicate in situ bedrock sources beneath a 2 km x 2 km soil anomaly, but the method is shallow and subject to open-hole contamination and dilution; follow-up with RC or diamond drilling is required to confirm true widths and continuity.
Key dependencies and near-term monitors: follow-up core/RC testing of the 1 km step-out corridor and the William South soil anomaly to establish strike and depth continuity, and targeted drilling to test the interpreted hydromorphic Cu halo from SJD-124-24. Expect actionable next results within a typical program timeline of several months after mobilization; specific milestones to watch are new core drill intercepts that confirm mineralized continuity and any announced conversion of auger anomalies into drill-defined bedrock resources.
Designated News Release
VANCOUVER, BC, Sept. 9, 2024 /PRNewswire/ - GoldMining Inc. (the "Company" or "GoldMining") (TSX: GOLD) (NYSE American: GLDG) is pleased to report final drill assay results from the previously announced diamond drilling program, and a progress update for the ongoing auger drilling program, at the Company's
Highlights include:
- The two most recent diamond drill holes successfully identified new gold and copper mineralization approximately 1 kilometre ("km") northwest of the São Jorge gold deposit (the "Deposit") in areas that had no previous drilling. Assay results include:
- Drill hole SJD-123-24:
- 10 m at 0.66 grams per tonne (g/t) gold (Au) from 93 metres (m) depth, including:
- 2 m at 1.65 g/t Au from 93 m depth.
- 10 m at 0.66 grams per tonne (g/t) gold (Au) from 93 metres (m) depth, including:
- Drill hole SJD-124-24:
- 28 m at 275 ppm (
0.0275% ) copper (Cu) from 28 m depth.
- 28 m at 275 ppm (
- Drill hole SJD-123-24:
- The ongoing shallow auger drilling program has returned very encouraging indications of new zones of primary gold mineralization at the William South target located approximately 2 km north of the Deposit. Several auger drill holes delivered high-grade intercepts within the top of weathered bedrock, directly underlying large high-tenor surface soil anomalies. Highlight drill intercepts include:
- 1 m at 17.14 g/t Au from 12 m depth
- 1 m at 8.01 g/t Au from 6 m depth
- 1 m at 3.78 g/t Au from 10 m depth
Alastair Still, Chief Executive Officer of GoldMining, commented: "The exploration program at São Jorge completed to date has significantly advanced our geological knowledge in the São Jorge district, including better defining the high-grade core of the São Jorge deposit. The recent step-out core drilling program has identified mineralization approximately 1 km away from the existing mineral resource in an area with no previous drilling. In addition, our team has assembled exciting evidence for potential additional corridors of mineralization on the regional scale property, which were diligently identified via gold-in-soil sampling and now have been confirmed through auger drilling to include a bedrock source containing high-grade gold."
Tim Smith, Vice President of Exploration of GoldMining, commented: "To complement the encouraging gold mineralization intersected in step-out core and auger drilling, drill hole SJD-124-24 intersected a broad zone of strongly anomalous copper which is encouraging as the Tapajos district is known to contain porphyry-style copper +/- gold mineralization. Further, gold mineralization intersected in SJD-123-24 is consistent with our thesis of an extensive high-strain corridor that could host additional gold mineralization northwest and southeast along strike of the Deposit as a component of a regional scale gold-bearing mineral system."
São Jorge Drill Program Overview
The Company commenced drilling at São Jorge in May 2024 (see news release dated May 29, 2024). The objectives of the program included confirmatory drilling within and near the margins of the existing São Jorge gold deposit (the "Deposit"), as well as exploratory drilling of identified gold targets within 1-2 km of known mineralization in areas with no previous drilling.
The diamond core drilling component of the program consisted of 1,077 m over five holes, and the ongoing 3,000 m auger drilling program is approximately two thirds complete, with assays received from approximately one third of the projected program. Assay results for the latest two diamond drill holes (SJD-123-24 and SJD-124-24) have been received, which combined with the previously released holes, SJD-120-24 to SJD-122-24 (see news releases dated June 18 and July 9, 2024), successfully concludes the current phase of diamond core drilling planned for São Jorge. The latest holes have identified new gold and copper mineralization approximately 1 km northwest of the existing deposit in an area that had not been previously drilled.
Ongoing auger drilling, focused in an area located approximately 2 km north of the São Jorge deposit to follow up on the large high tenor 'William South' gold-in-soil anomaly, has returned very encouraging indications of primary gold mineralization in bedrock which highlights that the large, regional-scale property has potential to host additional corridors of mineralization that can be further tested by core drilling.
São Jorge lies within the active and rapidly developing Tapajós Gold District (see Figure 1), which is estimated to have produced over 20 million ounces of gold historically from artisanal mining of surface deposits, according to the Brazil National Mining Agency. The Tapajós is home to Serabi Gold Plc.'s producing high-grade underground Palito Mine and G Mining Ventures Corp.'s ("G Mining") brand new Tocantinzinho Gold Mine, which recently declared commercial production (see G Mining news release September 3, 2024).
São Jorge is located immediately adjacent to paved Hwy BR-163 and a new 138 kV powerline corridor, which ties into the district electrical grid recently constructed for the Tocantinzinho Gold Mine. Exploration activities at São Jorge are operated from a permanent camp near the existing Deposit and just 3 km from the highway.
Diamond Core Drilling Program
Highlights of the confirmatory component of the drilling program included drill holes SJD-120-24 (see news release dated June 18, 2024) with an interval of 163 m at 1.02 g/t Au, and SJD-121-24 and SJD-122-24 (see news release dated July 9, 2024) with intervals of 18 m at 0.70 g/t Au and 19 m at 1.24 g/t Au respectively.
SJD-123-24 and SJD-124-24 – new drilling reported in this release - comprised step-out drilling located approximately 1 km to the northwest of the Deposit, testing coincident geochemical and geophysical anomalies interpreted to form an extension of the São Jorge high-strain corridor (see Figure 2). SJD-123-24 and SJD-124-24 tested strong and broad gold- and copper-in-soil surface anomalies, respectively. See Tables 1 and 2 for further information regarding the diamond core drilling.
Gold mineralization encountered in SJD-123-24 is similar in style to that in the São Jorge deposit, comprising fracture-controlled sulphide ± quartz veins, with the sulphides consisting of dominant pyrite with lesser chalcopyrite. This helps support our geological model that gold mineralization may extend along a broad high-strain corridor co-incident locally with a contact between monzogranite and syenogranite The sheared contact between monzogranite and syenogranite, which at the Deposit forms the southern boundary of the São Jorge high-strain corridor, was not intersected in the shallow depth drilled in SJD-123-24, thus follow-up drilling is warranted both across and along strike (see Figure 3 for a cross-section of SJD-123-24 and SJD-124-24).
The elevated copper encountered in SJD-124-24 is interpreted as a possible hydromorphic dispersion layer in saprolite, see Figure 3, formed from the in situ weathering of granitoid rock and the redistribution of mobile metals by ground water. It may form a horizontal blanket-shaped plume of elevated copper, concentrated between the base of complete oxidation ("BOCO") and top of fresh rock ("TOFR"), which is the typical location for hydromorphic mobilization of soluble metals in a lateritic weathering profile such as in the Tapajós district of the Brazilian Craton. The strongly anomalous Cu zone in SJD-124-24 contains approximately 20 times the typical background of copper levels normally found in granitoid rocks, and the location, continuity and tenor of the anomalous copper values may indicate an underlying bedrock source of copper mineralization in close proximity. Deeper sections of SJD-124-24 intersected thin discrete sulphide bearing veins with dominant pyrite and chalcopyrite, thus confirming a possible source of the elevated copper in bedrock. Hydromorphic dispersion halos may extend for 10s to 100s of meters from the source bedrock mineralization, therefore follow-up drilling is warranted to further explore and confirm the potential source, tenor and style of copper mineralization responsible for the broad halo of copper enrichment in the weathering profile.
Auger Geochemical Drilling Program
A power auger drilling program comprising an initial program of 3,000 meters for approximately 200 holes is underway at the Project. The auger program is initially targeting the high priority 'William South' area located approximately 2 km north of the São Jorge deposit. William South comprises a broad high-tenor zone of anomalous gold-in-soil (see Figures 2 and 4), measuring approximately 2 km x 2 km with soil assays peaking at 2,163 ppb Au (2.163 g/t Au).
To date assays have been received for 101 holes completed at the William South target. From the initial drill results, approximately
The auger drilling comprises a powered 20 centimetre diameter rotary drill head capable of penetrating to 15-20 m depth. A geologist or technician supervises the drilling to log the drill cuttings and distinguish transported overburden from in situ weathered bedrock. Sampling is conducted on 1 m intervals with assaying to 5 ppb Au detection. The drill method is open-hole, therefore contamination and/or dilution of precious metal grades by material from higher in the hole is possible. However, the low detection limit assay results, coupled with interpretation of the geological profile, provides a quick, cheap and effective direct mapping of the presence of gold mineralization in the uppermost portion of the residual weathered bedrock profile. This information can be used to guide follow-up exploration drilling using larger equipment such as reverse circulation (RC) or diamond core drilling. The auger drilling assay results received to date are illustrated in Figure 2, and details are provided in Tables 3 & 4.
Auger drilling at William South has to date returned very encouraging indications of primary gold mineralization in bedrock, which confirms an in situ source of the gold-in-soil anomaly and encourages more widespread application of auger drilling – a cheap and rapid sub-surface geochemical test – across other gold-in-soil anomalies within the Project. Furthermore, the confirmation of a bedrock gold source beneath the William South soil anomaly suggests that the large, regional-scale Project has potential to host additional corridors of mineralization that can be further tested by deeper RC or core drilling methods to define new bedrock gold discoveries. Several additional target areas are planned for auger drill testing over the coming months, see Figure 4.
For additional information regarding the São Jorge Project, including existing resource estimates and historical work at the project, please refer to the technical report titled "São Jorge Gold Project, Pará State, Brazil: Independent Technical Report on Mineral Resources", prepared for the Company and dated effective May 31, 2021, which is available under the Company's profile at www.sedarplus.ca.
Table 1 – São Jorge assay intercepts from the 2024 diamond core drilling program, received as of September 9, 2024.
Hole Number | Interval From (m) | Interval To (m) | Core Length1 (m) | Au Grade (g/t) | Cu Grade (ppm) |
SJD-120-24 | 44.00 | 207.00 | 163.00 | 1.02 | - |
SJD-120-24 | 44.00 | 64.00 | 20.00 | 1.37 | - |
Including | 45.00 | 50.00 | 5.00 | 2.82 | - |
Including | 45.00 | 46.00 | 1.00 | 7.25 | - |
SJD-120-24 | 69.00 | 70.00 | 1.00 | 3.03 | - |
SJD-120-24 | 74.00 | 75.00 | 1.00 | 5.05 | - |
SJD-120-24 | 95.00 | 132.00 | 37.00 | 2.26 | - |
Including | 97.00 | 98.00 | 1.00 | 11.47 | - |
Including | 102.00 | 104.00 | 2.00 | 12.22 | - |
SJD-120-24 | 148.00 | 159.00 | 11.00 | 1.00 | - |
Including | 152.00 | 155.00 | 3.00 | 2.31 | - |
SJD-120-24 | 166.00 | 179.00 | 13.00 | 1.35 | - |
SJD-120-24 | 195.0 | 207.0 | 12.00 | 1.15 | - |
including | 201.00 | 206.00 | 5.00 | 2.24 | - |
Including | 205.00 | 206.00 | 1.00 | 7.29 | - |
SJD-120-24 | 249.00 | 250.00 | 1.00 | 1.07 | - |
SJD-120-24 | 259.00 | 260.00 | 1.00 | 1.27 | - |
SJD-120-24 | 265.00 | 266.00 | 1.00 | 3.74 | - |
SJD-121-24 | 49.00 | 52.00 | 3.00 | 1.31 | - |
SJD-121-24 | 86.00 | 104.00 | 18.00 | 0.70 | - |
Including | 88.00 | 96.00 | 8.00 | 1.14 | - |
SJD-121-24 | 191.00 | 196.00 | 5.00 | 0.75 | - |
SJD-122-24 | 32.00 | 35.00 | 3.00 | 0.80 | - |
SJD-122-24 | 61.00 | 80.00 | 19.00 | 1.24 | - |
Including | 68.00 | 75.00 | 7.00 | 2.98 | - |
Including | 72.00 | 73.00 | 1.00 | 15.67 | - |
SJD-122-24 | 110.00 | 114.00 | 4.00 | 0.47 | - |
SJD-123-24 | 93.00 | 103.00 | 10.00 | 0.66 | - |
Including | 93.00 | 95.00 | 2.00 | 1.65 | - |
SJD-124-24 | 28.00 | 56.00 | 28.00 | - | 275 |
Notes: | |
1. | True widths are estimated to be approximately |
Table 2 – São Jorge 2024 diamond core drill hole collar location coordinates.
Hole Number | Easting Metres (UTM Zone 21S) | Northing Metres (UTM Zone 21S) | Elevation (m above sea level) | Depth (m) | Azimuth (Degrees) | Dip (Degrees) | Status |
SJD 120-24 | 657535 | 9282655 | 209.45 | 271.84 | 335 | -50 | All assays received |
SJD 121-24 | 656807 | 9283159 | 211.50 | 200.34 | 180 | -50 | All assays received |
SJD 122-24 | 656810 | 9283020 | 214.90 | 126.43 | 180 | -50 | All assays received |
SJD 123-24 | 656065 | 9283800 | 203.10 | 251.39 | 230 | -50 | All assays received |
SJD 124-24 | 656360 | 9284004 | 223.29 | 226.51 | 215 | -50 | All assays received |
Table 3 – São Jorge bedrock assay intercepts from the 2024 auger drilling program, received as of September 9, 2024
Hole Number | Interval From (m) | Interval To (m) | Sample Length1 (m) | Au Grade (g/t) |
SJTRD-047-24 to SJTRD-053-24 | No Significant Result | |||
SJTRD-054-24 | 9.00 | 10.00 | 1.00 | 0.22 |
SJTRD-055-24 | 10.00 | 11.00 | 1.00 | 0.96 |
SJTRD-056-24 to SJTRD-076-24 | No Significant Result | |||
SJTRD-077-24 | 7.00 | 9.00 | 1.00 | 3.05 |
SJTRD-078-24 | No Significant Result | |||
SJTRD-079-24 | 4.00 | 5.00 | 1.00 | 0.12 |
SJTRD-080-24 | 5.00 | 6.00 | 1.00 | 0.18 |
SJTRD-081-24 | 4.00 | 5.00 | 1.00 | 0.32 |
SJTRD-082-24 | 8.00 | 9.00 | 1.00 | 2.03 |
And | 12.00 | 13.00 | 1.00 | 17.14 |
SJTRD-083-24 | No Significant Result | |||
SJTRD-084-24 | 17.00 | 18.00 | 1.00 | 0.92 |
SJTRD-085-24 | No Significant Result | |||
SJTRD-086-24 | 6.00 | 7.00 | 1.00 | 8.01 |
SJTRD-087-24 to SJTRD-089-24 | No Significant Result | |||
SJTRD-090-24 | 9.00 | 10.00 | 1.00 | 0.83 |
SJTRD-091-24 | 9.00 | 11.00 | 2.00 | 1.47 |
SJTRD-092-24 to SJTRD-095-24 | No Significant Result | |||
SJTRD-096-24 | 6.00 | 7.00 | 1.00 | 0.28 |
SJTRD-097-24 | No Significant Result | |||
SJTRD-098-24 | 6.00 | 8.00 | 2.00 | 0.38 |
SJTRD-099-24 to SJTRD-107-24 | No Significant Result | |||
SJTRD-108-24 | 10.00 | 11.00 | 1.00 | 0.10 |
SJTRD-109-24 | 9.00 | 10.00 | 1.00 | 0.11 |
SJTRD-110-24 | 7.00 | 8.00 | 1.00 | 0.21 |
SJTRD-111-24 | No Significant Result | |||
SJTRD-112-24 | 5.00 | 6.00 | 1.00 | 0.19 |
SJTRD-113-24 | 10.00 | 11.00 | 1.00 | 0.17 |
SJTRD-114-24 to SJTRD-120-24 | No Significant Result | |||
SJTRD-121-24 | 8.00 | 9.00 | 1.00 | 0.11 |
SJTRD-122-24 to SJTRD-123-24 | No Significant Result | |||
SJTRD-124-24 | 9.00 | 11.00 | 2.00 | 2.06 |
Including | 10.00 | 11.00 | 1.00 | 3.78 |
SJTRD-125-24 to SJTRD-127-24 | No Significant Result | |||
SJTRD-128-24 | 13.00 | 14.00 | 1.00 | 0.78 |
SJTRD-129-24 to SJTRD-142-24 | No Significant Result | |||
Notes: | |
1. | True widths are unknown given the vertical hole angle and limited depth of drill penetration. |
Table 4 – São Jorge 2024 auger drill hole collar location coordinates.1
Hole Number | Easting Metres (UTM Zone 21S) | Northing Metres (UTM Zone 21S) | Elevation (m above sea level) | Depth (m) | Status |
SJTRD-047-24 | 656598 | 9284613 | 210 | 20 | All assays received |
SJTRD-048-24 | 656712 | 9284447 | 211 | 15 | All assays received |
SJTRD-049-24 | 656709 | 9284505 | 214 | 14 | All assays received |
SJTRD-052-24 | 656701 | 9284550 | 215 | 14 | All assays received |
SJTRD-051-24 | 656651 | 9284700 | 215 | 8 | All assays received |
SJTRD-050-24 | 656650 | 9284650 | 219 | 11 | All assays received |
SJTRD-055-24 | 656650 | 9284600 | 218 | 13 | All assays received |
SJTRD-054-24 | 656601 | 9284600 | 217 | 12 | All assays received |
SJTRD-053-24 | 656601 | 9284650 | 221 | 10 | All assays received |
SJTRD-056-24 | 656603 | 9284701 | 215 | 7 | All assays received |
SJTRD-057-24 | 656401 | 9284500 | 219 | 14 | All assays received |
SJTRD-058-24 | 656402 | 9284550 | 222 | 12 | All assays received |
SJTRD-059-24 | 656402 | 9284600 | 223 | 11 | All assays received |
SJTRD-060-24 | 656401 | 9284635 | 219 | 10 | All assays received |
SJTRD-061-24 | 656350 | 9284600 | 218 | 9 | All assays received |
SJTRD-062-24 | 656351 | 9284550 | 220 | 13 | All assays received |
SJTRD-063-24 | 656357 | 9284500 | 207 | 14 | All assays received |
SJTRD-064-24 | 656361 | 9284445 | 225 | 13 | All assays received |
SJTRD-065-24 | 656602 | 9284559 | 216 | 14 | All assays received |
SJTRD-066-24 | 656603 | 9284568 | 226 | 13 | All assays received |
SJTRD-067-24 | 656603 | 9284578 | 201 | 14 | All assays received |
SJTRD-068-24 | 656604 | 9284588 | 209 | 13 | All assays received |
SJTRD-069-24 | 656607 | 9284598 | 230 | 14 | All assays received |
SJTRD-070-24 | 656618 | 9284600 | 203 | 12 | All assays received |
SJTRD-071-24 | 656599 | 9284624 | 205 | 16 | All assays received |
SJTRD-072-24 | 656598 | 9284631 | 207 | 18 | All assays received |
SJTRD-073-24 | 656595 | 9284643 | 206 | 18 | All assays received |
SJTRD-074-24 | 656596 | 9284660 | 206 | 16 | All assays received |
SJTRD-075-24 | 656596 | 9284676 | 204 | 18 | All assays received |
SJTRD-076-24 | 656599 | 9284652 | 205 | 18 | All assays received |
SJTRD-077-24 | 656801 | 9284637 | 212 | 15 | All assays received |
SJTRD-078-24 | 656558 | 9284652 | 205 | 18 | All assays received |
SJTRD-079-24 | 656567 | 9284653 | 206 | 18 | All assays received |
SJTRD-080-24 | 656578 | 9284653 | 205 | 18 | All assays received |
SJTRD-081-24 | 656588 | 9284649 | 205 | 18 | All assays received |
SJTRD-082-24 | 656604 | 9284655 | 221 | 16 | All assays received |
SJTRD-083-24 | 656614 | 9284655 | 221 | 18 | All assays received |
SJTRD-084-24 | 656624 | 9284654 | 221 | 18 | All assays received |
SJTRD-085-24 | 656634 | 9284654 | 220 | 18 | All assays received |
SJTRD-086-24 | 656648 | 9284654 | 220 | 18 | All assays received |
SJTRD-087-24 | 656645 | 9284625 | 209 | 15 | All assays received |
SJTRD-088-24 | 656625 | 9284600 | 208 | 15 | All assays received |
SJTRD-089-24 | 656634 | 9284599 | 208 | 15 | All assays received |
SJTRD-090-24 | 656588 | 9284596 | 211 | 15 | All assays received |
SJTRD-091-24 | 656577 | 9284597 | 212 | 15 | All assays received |
SJTRD-092-24 | 656568 | 9284602 | 223 | 15 | All assays received |
SJTRD-093-24 | 656556 | 9284597 | 209 | 15 | All assays received |
SJTRD-094-24 | 656711 | 9284454 | 218 | 15 | All assays received |
SJTRD-095-24 | 656733 | 9284452 | 219 | 15 | All assays received |
SJTRD-096-24 | 656772 | 9284449 | 220 | 15 | All assays received |
SJTRD-097-24 | 656797 | 9284441 | 214 | 15 | All assays received |
SJTRD-098-24 | 656826 | 9284430 | 209 | 15 | All assays received |
SJTRD-099-24 | 656744 | 9284621 | 196 | 15 | All assays received |
SJTRD-100-24 | 656702 | 9284607 | 203 | 15 | All assays received |
SJTRD-101-24 | 656506 | 9284656 | 209 | 15 | All assays received |
SJTRD-102-24 | 656451 | 9284645 | 210 | 15 | All assays received |
SJTRD-103-24 | 656452 | 9284600 | 212 | 15 | All assays received |
SJTRD-104-24 | 656507 | 9284600 | 210 | 15 | All assays received |
SJTRD-105-24 | 656553 | 9284579 | 236 | 15 | All assays received |
SJTRD-106-24 | 656496 | 9284557 | 235 | 15 | All assays received |
SJTRD-107-24 | 656451 | 9284545 | 223 | 15 | All assays received |
SJTRD-108-24 | 656860 | 9284396 | 220 | 15 | All assays received |
SJTRD-109-24 | 656849 | 9284447 | 211 | 15 | All assays received |
SJTRD-110-24 | 656808 | 9284432 | 215 | 15 | All assays received |
SJTRD-111-24 | 656798 | 9284438 | 218 | 15 | All assays received |
SJTRD-112-24 | 656794 | 9284467 | 231 | 15 | All assays received |
SJTRD-113-24 | 656777 | 9284434 | 212 | 15 | All assays received |
SJTRD-114-24 | 656744 | 9284432 | 221 | 15 | All assays received |
SJTRD-115-24 | 656757 | 9284469 | 219 | 15 | All assays received |
SJTRD-116-24 | 656741 | 9284469 | 204 | 15 | All assays received |
SJTRD-117-24 | 656727 | 9284431 | 218 | 15 | All assays received |
SJTRD-118-24 | 656682 | 9284440 | 214 | 15 | All assays received |
SJTRD-119-24 | 656689 | 9284464 | 213 | 15 | All assays received |
SJTRD-120-24 | 656660 | 9284452 | 208 | 15 | All assays received |
SJTRD-121-24 | 656664 | 9284475 | 206 | 15 | All assays received |
SJTRD-122-24 | 656661 | 9284500 | 230 | 15 | All assays received |
SJTRD-123-24 | 656665 | 9284541 | 206 | 15 | All assays received |
SJTRD-124-24 | 656612 | 9284539 | 210 | 15 | All assays received |
SJTRD-125-24 | 656606 | 9284501 | 213 | 15 | All assays received |
SJTRD-126-24 | 656612 | 9284449 | 218 | 15 | All assays received |
SJTRD-127-24 | 656609 | 9284401 | 227 | 15 | All assays received |
SJTRD-128-24 | 656611 | 9284346 | 213 | 15 | All assays received |
SJTRD-129-24 | 656606 | 9284296 | 219 | 15 | All assays received |
SJTRD-130-24 | 656558 | 9284298 | 234 | 15 | All assays received |
SJTRD-131-24 | 656510 | 9284301 | 229 | 15 | All assays received |
SJTRD-132-24 | 656463 | 9284291 | 219 | 15 | All assays received |
SJTRD-133-24 | 656406 | 9284297 | 223 | 15 | All assays received |
SJTRD-134-24 | 656359 | 9284294 | 224 | 15 | All assays received |
SJTRD-135-24 | 656311 | 9284297 | 215 | 15 | All assays received |
SJTRD-136-24 | 656257 | 9284301 | 265 | 15 | All assays received |
SJTRD-137-24 | 656214 | 9284291 | 216 | 15 | All assays received |
SJTRD-138-24 | 656659 | 9284298 | 249 | 15 | All assays received |
SJTRD-139-24 | 656754 | 9284300 | 220 | 15 | All assays received |
SJTRD-140-24 | 656802 | 9284300 | 208 | 15 | All assays received |
SJTRD-141-24 | 656835 | 9284295 | 194 | 15 | All assays received |
SJTRD-142-24 | 656848 | 9284349 | 217 | 12 | All assays received |
Notes: | |
1. | All holes are collared at a vertical hole angle. |
Qualified Person
Paulo Pereira, P. Geo., President of GoldMining, has supervised the preparation of, and verified and approved, the scientific and technical information herein this news release. Mr. Pereira is a Qualified Person as defined in National Instrument 43-101 – Standards of Disclosure for Mineral Projects ("NI 43-101").
Data Verification
For this drill core sampling program, samples were taken from the NQ/HQ core by sawing the drill core in half, with one-half sent to SGS Geosol Laboratórios Ltda. ("SGS") in Brazil for assaying, and the other half of the core retained at the site for future reference. Sample lengths downhole were uniformly 1.0 m. For the auger drilling program, samples were collected at a 1 m sample interval, with the material being dried, homogenized and split in the field to obtain a 1 kg representative sample which was sent to SGS for analysis. The remaining auger sample material is stored until the lab results are received, and a 1 kg sample duplicate is maintained in the archive.
SGS is a certified commercial laboratory located in Vespasiano, Minas Gerais, Brazil, and is independent of GoldMining. GoldMining has implemented a quality assurance and quality control program for the sampling and analysis of drill core and auger samples, including duplicates, mineralized standards and blank samples for each batch of 100 samples. The gold analyses were completed by FAA505 method (fire-assay with an atomic absorption finish on 50 grams of material). Copper assays were completed by the GE_ICP40Q method (multi-acid digestion with an inductively coupled plasma optical emission spectroscopy finish on 0.25 gram of material).
About GoldMining Inc.
GoldMining Inc. is a public mineral exploration company focused on acquiring and developing gold assets in the Americas. Through its disciplined acquisition strategy, GoldMining now controls a diversified portfolio of resource-stage gold and gold-copper projects in Canada, the U.S.A., Brazil, Colombia, and Peru. The Company also owns approximately 21.5 million shares of Gold Royalty Corp. (NYSE American: GROY), 9.9 million shares of U.S. GoldMining Inc. (Nasdaq: USGO), and 26.7 million shares of NevGold Corp. (TSXV: NAU). See www.goldmining.com for additional information.
Notice to Readers
Technical disclosure regarding São Jorge has been prepared by the Company in accordance with NI 43-101. NI 43-101 is a rule of the Canadian Securities Administrators which establishes standards for all public disclosure an issuer makes of scientific and technical information concerning mineral projects. These standards differ from the requirements of the U.S. Securities and Exchange Commission ("SEC") and the scientific and technical information contained in this news release may not be comparable to similar information disclosed by domestic United States companies subject to the SEC's reporting and disclosure requirements.
Cautionary Statement on Forward-looking Statements
Certain of the information contained in this news release constitutes "forward-looking information" and "forward-looking statements" within the meaning of applicable Canadian and U.S. securities laws ("forward-looking statements"), which involve known and unknown risks, uncertainties and other factors that may cause the Company's actual results, performance and achievements to be materially different from the results, performance or achievements expressed or implied therein. Forward-looking statements, which are all statements other than statements of historical fact, include, but are not limited to, statements and expectations respecting the Company's expectations regarding the project and expected work programs thereat and often contain words such as "anticipate", "intend", "plan", "will", "would", estimate", "expect", "believe", "potential" and variations of such terms. Such forward-looking statements are based on the then-current expectations, beliefs, assumptions, estimates and forecasts about the business and the markets in which GoldMining operates, which may prove to be incorrect. Investors are cautioned that forward-looking statements involve risks and uncertainties, including, without limitation: the inherent risks involved in the exploration and development of mineral properties, fluctuating metal prices, unanticipated costs and expenses, risks related to government and environmental regulation, social, permitting and licensing matters, any inability to complete work programs as expected, the Company's plans with respect to São Jorge may change as a result of further planning or otherwise, and uncertainties relating to the availability and costs of financing needed in the future. These risks, as well as others, including those set forth in GoldMiningꞌs most recent Annual Information Form and other filings with Canadian securities regulators and the SEC, could cause actual results and events to vary significantly. Accordingly, readers should not place undue reliance on forward-looking statements. There can be no assurance that forward-looking statements, or the material factors or assumptions used to develop such forward-looking statements, will prove to be accurate. The Company does not undertake to update any forward-looking statements, except in accordance with applicable securities law.
View original content to download multimedia:https://www.prnewswire.com/news-releases/goldmining-discovers-gold-and-copper-mineralization-in-drilling-1-km-from-the-sao-jorge-deposit-brazil-302241262.html
SOURCE GoldMining Inc.
FAQ
What did GoldMining (GLDG) announce about São Jorge on Nov 4, 2025?
How significant was the gold intercept in GLDG hole SJD-120-24?
What high-grade auger results did GLDG report at William South?
What did GLDG find in drill hole SJD-124-24 and why does it matter?
Does GoldMining plan follow-up drilling at São Jorge (GLDG)?
How complete is the São Jorge auger program mentioned by GLDG?
