Velo3D Announces Preliminary Third Quarter 2026 Revenue of Approximately $19.5 Million to $20.5 Million, Representing Year-over-Year Growth of Approximately 43% to 51%
The revenue estimates remain subject to quarter-end closing procedures and final adjustments.
Sentiment and the balance of points
Rhea-AI Sentiment reads the wording of the document, how positive or negative its language is on a 1 to 5 scale. The balance of points shown with the takes weighs what the document actually discloses, so the two can disagree, for example when a trial that missed its main goal is described in upbeat language.
Rhea-AI Summary
Velo3D (Nasdaq: VELO) expects preliminary third-quarter 2026 revenue of approximately $19.5 million to $20.5 million, reflecting year-over-year growth.
The expected range represents growth of approximately 43% to 51% from $13.6 million in the third quarter of 2025. The quarter ended September 30, 2026. These unaudited estimates remain subject to quarter-end closing procedures and final adjustments; actual results could differ materially. The independent accounting firm has not audited, reviewed or performed procedures on this revenue information. Velo3D expects to report final third-quarter financial results during the week of November 9, 2026.
How this balance works
Rhea-AI gives every point it takes from this document a weight. Minor counts 1, Moderate 3 and Major 9, so one Major point outweighs several Minor ones. The bar adds up the weights on each side, and when neither side holds more than 65% of the total the balance reads Mixed.
It reads the document as published, with the same rules for every company, and it does not look at what the market expected or at how the stock traded, so a point can be objectively good on a day the stock falls.
Rhea-AI Sentiment measures something else, the tone of the wording.
Hollow bars mark forward-looking points. How the balance works
Positive
- Moderate point. Forward-looking: it has not happened yet and may not happen.Preliminary Q3 2026 revenue expected at approximately $19.5 million–$20.5 million, up approximately 43%–51% year over year.
Negative
- Minor point. Forward-looking: it has not happened yet and may not happen.Unaudited revenue estimates remain subject to closing procedures and final adjustments; actual results could differ materially.
Details
Market Reaction – VELO
On Oct 15, the day this news came out, the latest delayed price for VELO is 3.01% below the previous close. Argus tracked a trough of -3.8% from its starting point during tracking. Our momentum scanner has recorded 21 alerts for this stock so far that day. The latest delayed price is $6.83. Relative volume is elevated at 2.6x the average.
Data tracked by StockTitan Argus (15 min delayed). Upgrade to Gold for real-time data.
Key Figures
- Preliminary Q3 revenue
- Approximately $19.5 million to $20.5 million
- Third quarter 2026
- Year-over-year revenue growth
- Approximately 43% to 51%
- Q3 2026 compared with Q3 2025
Historical Context
-
Q2 revenue reached $20.7 million, up 52.3% year over year, and full-year guidance was raised.
24h Move is the share-price change in the day after each event; other market factors may also have contributed.
Key Terms
u.s. gaap financial
AI-generated analysis. How Rhea-AI works. Not financial advice.
Company plans to report final financial results for Q3 2026 the week of November 9
The Company expects revenue for the third quarter of 2026 to be in the range of approximately
The Company's actual results could differ materially from these preliminary estimates. This preliminary information is not necessarily indicative of the results to be expected for any future period and should not be viewed as a substitute for full financial statements prepared in accordance with Generally Accepted Accounting Principles in
Velo3D expects to report its final financial results for the third quarter of 2026 during the week of November 9, 2026.
About Velo3D:
Velo3D is a metal 3D printing technology company that enables customers to build mission-critical metal parts. The fully integrated solution includes the Flow™ print preparation software, the Sapphire® family of printers and the Assure™ quality control system — all powered by Velo3D's Intelligent Fusion® manufacturing process. Learn more at velo3d.com.
Velo, Velo3D, Sapphire and Intelligent Fusion are registered trademarks of Velo3D, Inc. Flow and Assure are trademarks of Velo3D, Inc.
Forward-Looking Statements:
This press release includes "forward-looking statements" within the meaning of the "safe harbor" provisions of the Private Securities Litigation Reform Act of 1995. All statements other than statements of historical fact contained in this press release are forward-looking statements. The Company's actual results may differ from its expectations, estimates and projections and consequently, you should not rely on these forward-looking statements as predictions of future events. Words such as "expect", "estimate", "project", "budget", "forecast", "anticipate", "intend", "plan", "may", "will", "could", "should", "believes", "predicts", "potential", "continue", and similar expressions are intended to identify such forward-looking statements. These forward-looking statements include, without limitation, the Company's preliminary estimates of revenue for the third quarter of 2026 and the expected timing of the release of its final financial results for that quarter. These forward-looking statements involve significant risks and uncertainties that could cause the actual results to differ materially from the expected results. You should carefully consider the risks and uncertainties described in the "Risk Factors" section of the Company's Annual Report on Form 10-K for the fiscal year ended December 31, 2025 (the "FY 2025 10-K") and its Quarterly Reports on Form 10-Q ("Quarterly Reports") and the other documents filed by the Company from time to time with the SEC. These filings identify and address other important risks and uncertainties that could cause actual events and results to differ materially from those contained in the forward-looking statements. Many of these factors are outside the Company's control and are difficult to predict. Factors that may cause such differences include, but are not limited to: (1) the completion of the Company's quarter-end financial closing procedures, final adjustments and the identification of adjustments arising from those procedures, the discovery of new or additional information affecting accounting estimates or revenue recognition, management's judgments underlying the preliminary estimates, subsequent events, and the preparation and review of the Company's financial statements for the quarter; (2) the inability of the Company to execute its business plan, which may be affected by, among other things, competition, the Company's cash/liquidity position, the ability of the Company to grow and manage growth profitably, maintain relationships with customers and suppliers and retain its key employees; (3) the Company's ability to continue as a going concern; (4) the Company's ability to service and comply with its indebtedness; (5) the Company's ability to raise additional capital in the near-term; (6) the possibility that the Company may be adversely affected by other economic, business, and/or competitive factors; (7) the risk that future sales of common stock, including sales under the Company's at-the-market offering program, will dilute existing stockholders and may adversely affect the market price of the Company's common stock; (8) changes in the applicable laws and regulations; (9) risks related to the Company's exposure to government and defense contracts, including potential delays or reductions in government funding, government shutdowns, changes in defense procurement priorities or spending levels, and the timing and uncertainty of government contract awards and modifications; (10) the risk that the Company's backlog may not convert into revenue on the timelines the Company expects, or at all; (11) the risk that the Company may not achieve its financial guidance for fiscal year 2026 and that actual results may differ materially from, or that the Company may revise, such guidance; and (12) other risks and uncertainties described in the FY 2025 10-K and the Quarterly Reports, including those under "Risk Factors" therein, and in the Company's other filings with the SEC, which are available on sec.gov. The Company cautions that the foregoing list of factors is not exclusive and cautions readers not to place undue reliance upon any forward-looking statements, including projections, which speak only as of the date of this press release. The Company does not undertake or accept any obligation to release publicly any updates or revisions to any forward-looking statements to reflect any change in its expectations or any change in events, conditions or circumstances on which any such statement is based, except as required by applicable law.
Investor Relations:
Velo3D
Hayden IR
James Carbonara, Managing Director
investors@velo3d.com
View original content to download multimedia:https://www.prnewswire.com/news-releases/velo3d-announces-preliminary-third-quarter-2026-revenue-of-approximately-19-5-million-to-20-5-million-representing-year-over-year-growth-of-approximately-43-to-51-302909345.html
SOURCE Velo3D, Inc.
FAQ
AI-generated questions and answers. How Rhea-AI works. Not financial advice.
How much revenue does Velo3D expect for the third quarter of 2026?
Velo3D expects preliminary unaudited revenue of approximately $19.5 million to $20.5 million for the quarter ended September 30, 2026. That represents year-over-year growth of approximately 43% to 51%, compared with $13.6 million in the third quarter of 2025.
When will Velo3D report final third-quarter 2026 financial results?
Velo3D expects to report final third-quarter 2026 financial results during the week of November 9, 2026.