STOCK TITAN

3D Systems Q3 2026 net loss widens to $33.5M

Fourth-quarter guidance calls for revenue of $100 million to $103 million and Adjusted EBITDA of ($2) million to $0 million.

Available on EDGAR Accepted by SEC EDGAR Learn about SEC filing dates
(High)

Sentiment and the balance of points

Rhea-AI Sentiment reads the wording of the document, how positive or negative its language is on a 1 to 5 scale. The balance of points shown with the takes weighs what the document actually discloses, so the two can disagree, for example when a trial that missed its main goal is described in upbeat language.

Form Type
8-K

Rhea-AI Filing Summary

3D Systems (DDD) reported third-quarter 2026 revenue of $99.3 million, up 8.8% year over year and 10.9% excluding software divestitures. Healthcare Solutions revenue rose approximately 14.4% to $49.0 million; Industrial Solutions revenue rose approximately 3.9% to $50.3 million, or 7.7% excluding divestitures. Gross profit margin was 35.0%, versus 32.3%.

Net loss attributable to 3D Systems was $33.5 million, compared with $18.1 million a year earlier. The company attributed the increase primarily to litigation expense, an asset impairment charge, foreign exchange and income taxes. Adjusted EBITDA was $3.1 million, versus a $10.8 million loss; excluding software divestitures, the prior-year loss was $10.0 million. For the first nine months, operating cash use was $17.5 million, compared with $73.1 million.

At September 30, 2026, cash and investments totaled $120.5 million. Debt principal of $3.9 million is scheduled to mature in the fourth quarter of 2026, with remaining principal of $92.0 million maturing in 2030. Fourth-quarter outlook is revenue of $100 million to $103 million and Adjusted EBITDA of ($2) million to $0 million; at the midpoint, the company expects full-year revenue growth approaching mid-single digits.

3 points · 0 major

How this balance works

Rhea-AI gives every point it takes from this document a weight. Minor counts 1, Moderate 3 and Major 9, so one Major point outweighs several Minor ones. The bar adds up the weights on each side, and when neither side holds more than 65% of the total the balance reads Mixed.

It reads the document as published, with the same rules for every company, and it does not look at what the market expected or at how the stock traded, so a point can be objectively good on a day the stock falls.

Rhea-AI Sentiment measures something else, the tone of the wording.

0 major · 1 point

How the balance works

Positive

  • Moderate pointRevenue rose 8.8% year over year to $99.3 million.
  • Moderate pointAdjusted EBITDA was $3.1 million, versus a $10.8 million loss.
  • Moderate pointNine-month operating cash use fell to $17.5 million from $73.1 million.

Negative

  • Moderate pointNet loss increased $15.5 million year over year to $33.5 million.

Filing Explained

At September 30, 2026, 3D Systems reported 166,420 thousand common shares issued, versus 145,581 thousand at December 31, 2025, and $53,825 thousand in equity-offering proceeds for the nine months; the larger issued-share base reduces existing holders’ percentage ownership absent offsets.

Item 2.02 Results of Operations and Financial Condition Financial
Disclosure of earnings results, typically an earnings press release or preliminary financials.
Item 9.01 Financial Statements and Exhibits Exhibits
Financial statements, pro forma financial information, or exhibit attachments filed with this report.
Revenue $99.3 million Third quarter 2026
Revenue growth 8.8% Third quarter 2026 year over year
Net loss attributable to 3D Systems $33.5 million Third quarter 2026, compared with $18.1 million in 2025
Adjusted EBITDA $3.1 million Third quarter 2026, compared with a $10.8 million loss in 2025
Net cash used in operating activities $17.5 million Nine months ended September 30, 2026; $73.1 million used in the prior-year period
Cash and investments $120.5 million As of September 30, 2026
Fourth-quarter revenue outlook $100 million to $103 million Fourth quarter 2026
Fourth-quarter Adjusted EBITDA outlook ($2) million to $0 million Fourth quarter 2026
Adjusted EBITDA financial
"Adjusted EBITDA improved to $3.1 million"
Adjusted EBITDA is a way companies measure how much money they make from their core operations, like running a business, by removing certain costs or income that aren’t part of regular business activities. It helps investors see how well a company is doing without distractions from unusual expenses or gains, making it easier to compare companies or track performance over time.
Software Divestitures financial
"together with Geomagic, the "Software Divestitures""
operating leverage financial
"improved operating leverage in the quarter"
Operating leverage measures how much a company's profits are affected by changes in sales volume. When a business has high operating leverage, small increases in sales can lead to much larger increases in profit, much like a lever amplifies force. It matters to investors because it indicates how sensitive a company's earnings are to fluctuations in sales, affecting risk and potential returns.
restricted cash financial
"cash, cash equivalents and restricted cash"
Cash that a company holds but cannot use for day-to-day operations because it is set aside for a specific purpose—such as meeting loan covenants, serving as collateral, funding an escrow, or complying with regulations. Like money in a locked savings account earmarked for a bill, restricted cash reduces the cash available to run the business and pay dividends or debts, so investors treat it differently when assessing a company’s true short-term financial strength.
non-GAAP gross profit margin financial
"Non-GAAP gross profit margin increased to 35.5%"
Non-GAAP gross profit margin is a company’s gross profit percentage calculated after removing certain expenses or gains that management considers unusual or not part of ongoing operations. Investors use it like looking at a cleaned-up version of a business’s core profitability—similar to judging a car’s fuel efficiency after ignoring one-off trips—because it can highlight underlying trends, but it may vary from standard accounting and can be adjusted in different ways.
Revenue $99.3 million Up 8.8% year over year
Net loss attributable to 3D Systems $33.5 million Increased by $15.5 million year over year
Adjusted EBITDA $3.1 million Improved by $13.9 million year over year
Guidance

Fourth-quarter 2026 revenue of $100 million to $103 million and Adjusted EBITDA of ($2) million to $0 million.

FAQ

AI-generated questions and answers. How Rhea-AI works. Not financial advice.

What revenue did DDD report for Q3 2026?

3D Systems reported $99.3 million in third-quarter revenue, up 8.8% year over year. Revenue was up 10.9% excluding software divestitures. Healthcare Solutions generated $49.0 million and Industrial Solutions generated $50.3 million.

How much did DDD lose in Q3 2026?

3D Systems reported a net loss attributable to the company of $33.5 million, compared with $18.1 million in Q3 2025. The company attributed the increase primarily to litigation expense, an asset impairment charge, an unfavorable foreign exchange impact and an unfavorable year-over-year change in income taxes.

What is DDD's Q4 2026 outlook?

3D Systems expects fourth-quarter revenue of $100 million to $103 million and Adjusted EBITDA of ($2) million to $0 million. At the midpoint of its fourth-quarter outlook, the company expects full-year 2026 revenue growth approaching mid-single digits.

AI-generated analysis. How Rhea-AI works. Not financial advice.

See more from StockTitan in Google Search and AI answers. Adds StockTitan as a preferred source · opens Google
Add on Google
0000910638false00009106382026-11-042026-11-04

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 8-K
CURRENT REPORT
PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES ACT OF 1934

Date of Report (Date of earliest event reported): November 4, 2026

3D SYSTEMS CORPORATION
(Exact name of registrant as specified in its charter)
Delaware
001-34220
95-4431352
(State or other jurisdiction of incorporation or organization)
(Commission File Number)
(I.R.S. Employer Identification No.)

333 Three D Systems Circle
Rock Hill, South Carolina 29730
(Address of Principal Executive Offices) (Zip Code)

(803) 326-3900
(
Registrant's telephone number, including area code)

N/A
(Former name or former address, if changed since last report.)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):

☐ Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)
☐ Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)
☐ Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))
☐ Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

Securities registered pursuant to Section 12(b) of the Act:
Title of each classTrading Symbol(s)Name of each exchange on which registered
Common stock, $0.001 per shareDDDNew York Stock Exchange

Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).

Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o



Item 2.02. Results of Operations and Financial Condition.

On November 4, 2026, 3D Systems Corporation (the “Company”) issued a press release announcing the Company's financial results for the third quarter ended September 30, 2026 (the “Press Release”). A copy of the Press Release is furnished herewith as Exhibit 99.1 and is incorporated into this Item 2.02 by reference. The information in this Item 2.02 (and in the Press Release) shall not be deemed “filed” with the Securities and Exchange Commission for purposes of the Securities Exchange Act of 1934, as amended, nor incorporated by reference in any registration statement filed by the Company under the Securities Act of 1933, as amended.

Item 9.01. Financial Statements and Exhibits.

(d) Exhibits.
99.1
Press Release issued by 3D Systems Corporation, dated November 4, 2026
104Cover Page Interactive Data File (embedded within Inline XBRL document).







SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

3D SYSTEMS CORPORATION
Date: November 4, 2026
/s/ Phyllis Nordstrom
Phyllis Nordstrom
Chief Financial Officer and Chief Administrative Officer




EXHIBIT 99.1

3D Systems Reports Third Quarter 2026 Financial Results
ROCK HILL, South Carolina - November 4, 2026 - 3D Systems Corporation (NYSE:DDD) announced today its financial results for the third quarter ended September 30, 2026.
•Q3 2026 revenue of $99.3 million, up 9% year-over-year, and up 11% excluding software divestitures, driven by double-digit growth in new printer and parts manufacturing sales and strong dental materials revenue.
•Net loss was $33.5 million for the quarter, while Adjusted EBITDA improved to $3.1 million, reflecting the benefits of prior cost reduction initiatives, higher sales volumes, and improved operating leverage in the quarter.
•Healthcare revenue increased 14% year-over-year, driven by continued growth in personalized healthcare solutions, and more than 20% growth in both healthcare parts manufacturing and dental materials sales.
•Industrial revenue increased 4% year-over year, or 8% excluding software divestitures, driven by strong growth in Data Center Infrastructure and more than 50% growth in Aerospace & Defense, partially offset by declines in consumer-facing markets.
•Our four strategic markets delivered strong double-digit growth through the first three quarters of 2026, advancing our strategy to accelerate growth in Med Tech, Dental, Aerospace & Defense and Data Center Infrastructure.

Summary of Financial Results
(Unaudited)
Three Months Ended Nine Months Ended
(in millions, except per share data)September 30, 2026September 30, 2025September 30, 2026September 30, 2025
Revenue$99.3 $91.2 $289.4 $280.6 
Gross profit34.8 29.4 103.6 98.3 
Gross profit margin35.0 %32.3 %35.8 %35.0 %
Operating expense59.3 50.7 145.4 171.7 
Operating loss(24.5)(21.3)(41.8)(73.4)
Net (loss) income attributable to 3D Systems Corporation(33.5)(18.1)(50.8)49.4 
Diluted (loss) income per share(0.21)(0.14)(0.33)0.29 
Non-GAAP measures, excluding software divestitures for year-over-year comparisons
Non-GAAP revenue99.3 89.5 289.4 268.8 
Non-GAAP gross profit margin 35.5 %31.3 %36.1 %33.3 %
Non-GAAP operating expense36.1 42.3 112.2 143.5 
Adjusted EBITDA3.1 (10.0)4.4 (40.8)
Non-GAAP diluted loss per share$(0.06)$(0.08)$(0.11)$(0.28)




Summary Comments on Results
Dr. Jeffrey Graves, President and Chief Executive Officer of 3D Systems, said, “We are pleased with our third-quarter and year-to-date performance. Revenue growth accelerated, Adjusted EBITDA turned positive for the quarter and the year-to-date period, and our four strategic markets, Med Tech, Dental, Aerospace & Defense, and Data Center Infrastructure, continued to deliver strong double-digit growth. These results reflect the progress we have made executing a focused strategy: concentrating resources on high-value production applications, refreshing our product portfolio, and expanding our metal parts manufacturing capability. Customers in these markets are increasingly adopting 3D printing as a core manufacturing technology, and the combination of design flexibility and production economics is enabling higher-performance components and systems to move into full production.”

Dr. Graves concluded, “As the additive manufacturing industry begins to emerge from a multi-year downturn, the consistent investments we have made in technology, application expertise, and production capacity during this challenging period have positioned the Company to benefit from the recovery. While the broader economic and geopolitical environment remains volatile, capital investment in our priority markets is now strengthening, and we are well positioned to support the resulting increase in demand for manufacturing capacity. I am confident in the foundation we have built and in the Company’s ability to deliver profitable growth in the years ahead.”

"Our positive third-quarter results demonstrate continued progress against the priorities we established over the past two years,” said Phyllis Nordstrom, Chief Financial Officer of 3D Systems. “We delivered strong revenue growth while maintaining effective cost management, resulting in positive Adjusted EBITDA year-to-date. At the same time, we are steadily reshaping our business around our four strategic markets through the first three quarters of the year. Our year-to-date performance gives us confidence that our strategy is gaining traction and creating a stronger foundation for profitable growth."
Third Quarter 2026 Results
Total revenue increased 8.8% to $99.3 million compared to the prior year period. Excluding the impact of software divestitures completed in 2025, including 3DXpert and Oqton, total revenue increased by 10.9%.
Healthcare Solutions revenue increased approximately 14.4% to $49.0 million compared to the prior year period. Revenue growth was primarily driven by higher dental material sales and increased parts manufacturing volumes.
Industrial Solutions revenue increased approximately 3.9% to $50.3 million compared to the prior year period, or increased 7.7% excluding the impact of software divestitures, primarily driven by higher printer and parts manufacturing sales.
Gross profit margin increased to 35.0% compared to 32.3% in the prior year period. Non-GAAP gross profit margin increased to 35.5% compared to 32.5% in the prior year period. Adjusting for software divestitures, non-GAAP gross profit margin increased by 420 basis points. Non-GAAP gross profit margin benefited from higher sales volumes in printers and parts manufacturing, product gross profit margin expansion, and the non-recurrence of certain prior-year costs associated with a non-core site closure and a Reg Med accounting adjustment.
Net loss attributable to 3D Systems Corporation increased by $15.5 million to $33.5 million, compared to the prior year period. The increase was primarily the result of litigation expense, an asset impairment charge, an unfavorable foreign exchange impact, and an unfavorable year-over-year change in income taxes.
Adjusted EBITDA improved by $13.9 million, to $3.1 million compared to the prior year period, driven primarily by the impact of prior cost reduction initiatives, higher sales volumes in the quarter, and improved operating leverage in the quarter. Excluding the impact of software divestitures, Adjusted EBITDA improved $13.1 million.
Financial Liquidity
At September 30, 2026, the Company had total cash and investments of $120.5 million, which included cash, cash equivalents and restricted cash of $91.8 million, short-term investments of $27.1 million, and long-term investments of $1.6 million. A total of $3.9 million in principal amount of debt is scheduled to mature in the fourth quarter of 2026, with the remaining $92.0 million principal maturing in 2030.

Fourth Quarter 2026 Outlook
Revenue: $100 - $103 million
Adjusted EBITDA: ($2) million - $0 million

The fourth-quarter outlook reflects continued positive momentum across the Company’s four strategic markets, while incorporating normal variability in customer program and investment cycles and more evenly distributed purchasing patterns we observed throughout the year. At the midpoint of our fourth-quarter outlook, the Company expects full year revenue growth approaching mid-single digits for 2026.
3D Systems does not provide forward-looking guidance for certain measures on a GAAP basis. The Company is unable to provide a quantitative reconciliation of forward-looking Adjusted EBITDA to the most directly comparable forward-looking GAAP measures without unreasonable effort because certain items, including litigation expenses, acquisition expenses, stock-based compensation expense, intangible amortization expense, restructuring expenses, and goodwill impairment, are difficult to predict and estimate. These items are inherently uncertain and depend on various factors, many of which are beyond the Company’s control, and as such, any associated estimate and its impact on GAAP performance could vary materially.
Third Quarter 2026 Conference Call and Webcast
The Company will host a conference call and simultaneous webcast to discuss these results on November 5, 2026, which may be accessed as follows:
Date: Thursday, November 5, 2026
Time: 8:30 a.m. Eastern Time
Listen via webcast: www.3dsystems.com/investor
Participate via telephone: 201-689-8345 or 877-407-8291
A replay of the webcast will be available approximately two hours after the live presentation at www.3dsystems.com/investor.
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 including statements regarding fourth quarter 2026 revenue and adjusted EBITDA guidance, the timing of product launches, regulatory approvals, market opportunities, expected revenue impact, and shareholder value. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the Company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward-looking statements can be identified by terms such as "believes," "belief," "expects," "may," "will," "estimates," "intends," "anticipates" or "plans" or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions, and current expectations and may include comments as to the Company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the Company. The factors described under the headings "Forward-Looking Statements" and "Risk Factors" in the Company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.



About 3D Systems
For 40 years, Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; data center infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future. More information on the Company is available at www.3dsystems.com.




3D SYSTEMS CORPORATION
Condensed Consolidated Balance Sheets
(Unaudited)

(in thousands, except par value) September 30, 2026December 31, 2025
ASSETS
Current assets:
Cash and cash equivalents$91,339 $95,635 
Short-term investments27,065 — 
Accounts receivable, net of reserves — $5,704 and $3,608
86,232 83,806 
Inventories, net118,482 127,496 
Prepaid expenses and other current assets35,675 39,770 
Total current assets358,793 346,707 
Property and equipment, net
47,036 49,249 
Intangible assets, net14,359 16,614 
Goodwill15,371 15,575 
Operating lease right-of-use assets41,122 45,364 
Finance lease right-of-use assets6,778 7,774 
Long-term deferred income tax assets2,695 2,787 
Other assets39,524 37,658 
Total assets$525,678 $521,728 
LIABILITIES, REDEEMABLE NON-CONTROLLING INTEREST AND EQUITY
Current liabilities:
Current portion of long-term debt, net of deferred financing costs$3,944 $3,944 
Current operating lease liabilities8,004 11,583 
Accounts payable32,776 41,017 
Accrued and other liabilities57,609 46,656 
Customer deposits and deferred revenue19,505 17,423 
Total current liabilities121,838 120,623 
Long-term debt, net of deferred financing costs87,852 86,394 
Long-term operating lease liabilities42,162 45,420 
Long-term deferred income tax liabilities3,246 2,740 
Other liabilities23,882 24,000 
Total liabilities278,980 279,177 
Commitments and contingencies
Redeemable non-controlling interest— 2,193 
Stockholders’ equity:
Preferred stock, $0.001 par value; 5,000 shares authorized; no shares issued and outstanding as of September 30, 2026 and December 31, 2025— — 
Common stock, $0.001 par value; 440,000 shares authorized, 166,420 shares issued as of September 30, 2026; 220,000 shares authorized, 145,581 shares issued as of December 31, 2025166 146 
Additional paid-in capital1,678,232 1,620,399 
Accumulated deficit(1,383,180)(1,332,360)
Accumulated other comprehensive loss(48,520)(47,827)
Total stockholders’ equity246,698 240,358 
Total liabilities, redeemable non-controlling interest and stockholders’ equity$525,678 $521,728 



3D SYSTEMS CORPORATION
Condensed Consolidated Statements of Operations
(Unaudited)

Three Months EndedNine Months Ended
(in thousands, except per share amounts)September 30, 2026September 30, 2025September 30, 2026September 30, 2025
Revenue:
Products$58,178 $52,311 $170,788 $160,835 
Services41,126 38,938 118,633 119,792 
Total revenue99,304 91,249 289,421 280,627 
Cost of sales:
Products38,717 36,109 110,649 105,748 
Services25,803 25,709 75,183 76,609 
Total cost of sales64,520 61,818 185,832 182,357 
Gross profit34,784 29,431 103,589 98,270 
Operating expenses:
Selling, general and administrative46,354 34,716 112,837 118,624 
Research and development10,064 16,025 29,671 53,069 
Asset impairment charges
2,857 — 2,857 — 
Total operating expenses59,275 50,741 145,365 171,693 
Loss from operations(24,491)(21,310)(41,776)(73,423)
Non-operating (loss) income:
Foreign exchange (loss) gain, net(6,294)2,623 (2,192)2,171 
Interest income 709 784 1,868 3,454 
Interest expense (2,159)(1,924)(6,478)(3,202)
Gain on disposition— — — 125,681 
Other income, net212 475 2,901 7,335 
Total non-operating (loss) income (7,532)1,958 (3,901)135,439 
Net (loss) income before income taxes(32,023)(19,352)(45,677)62,016 
(Provision) benefit for income taxes(924)2,630 (2,761)(9,059)
Loss on equity method investments, net of income taxes(588)(1,331)(2,541)(3,560)
Net (loss) income before redeemable non-controlling interest(33,535)(18,053)(50,979)49,397 
Less: net loss attributable to redeemable non-controlling interest— — (159)— 
Net (loss) income attributable to 3D Systems Corporation$(33,535)$(18,053)$(50,820)$49,397 
Net (loss) income per common share:
Basic$(0.21)$(0.14)$(0.33)$0.38 
Diluted$(0.21)$(0.14)$(0.33)$0.29 
Weighted average shares outstanding:
Basic162,911125,273151,785129,979
Diluted162,911125,273151,785178,397








3D SYSTEMS CORPORATION
Condensed Consolidated Statements of Cash Flows
(Unaudited)
Nine Months Ended
(in thousands)September 30, 2026September 30, 2025
OPERATING ACTIVITIES
Net (loss) income before redeemable non-controlling interest$(50,979)$49,397 
Adjustments to reconcile net (loss) income to net cash used in operating activities:
Depreciation and amortization15,073 16,280 
Amortization of debt issuance costs 1,556 993 
Stock-based compensation5,591 1,805 
Non-cash operating lease expense5,924 7,382 
Provision for inventory obsolescence5,219 5,158 
Provision for bad debts2,439 1,458 
Gain on the disposition of businesses, property, equipment and other assets(485)(126,251)
Gain on debt extinguishment— (8,203)
Provision (benefit) for deferred income taxes and reserve adjustments519 (1,154)
Gain on disposal of investment (2,576)— 
Loss on equity method investment, net of taxes2,541 3,560 
Asset impairment charges
2,857 — 
Changes in operating accounts:
Accounts receivable(9,767)18,288 
Inventories(444)(15,474)
Prepaid expenses and other current assets3,340 (6,422)
Accounts payable(8,338)(4,844)
Deferred revenue and customer deposits6,780 (809)
Accrued and other liabilities8,717 (2,645)
All other operating activities(5,469)(11,650)
Net cash used in operating activities(17,502)(73,131)
INVESTING ACTIVITIES
Purchases of property and equipment(8,315)(7,995)
Purchases of short-term and long-term investments(28,706)— 
Purchase of patents (1,000)— 
Proceeds from sale of assets and businesses, net of cash sold215 119,400 
Acquisitions and other investments, net of cash acquired— (3,400)
Other investing activities(112)271 
Net cash (used in) provided by investing activities(37,918)108,276 
FINANCING ACTIVITIES
Proceeds from equity offering53,825 — 
Equity issuance costs(693)— 
Proceeds from borrowings and long-term debt— 92,030 
Repayment of borrowings and long-term debt— (169,987)
Debt issuance costs — (3,425)
Stock repurchases — (14,960)
Purchase of non-controlling interests(900)— 
Taxes paid related to net-share settlement of equity awards(879)(830)
Other financing activities(1,245)(1,168)
Net cash provided by (used in) financing activities50,108 (98,340)
Effect of exchange rate changes on cash, cash equivalents and restricted cash(22)4,553 
Net increase (decrease) in cash, cash equivalents and restricted cash(5,334)(58,642)
Cash, cash equivalents and restricted cash at the beginning of the year
97,100 172,881 
Cash, cash equivalents and restricted cash at the end of the period
$91,766 $114,239 



3D SYSTEMS CORPORATION
Segment Information
(Unaudited)

Three Months Ended Nine Months Ended
(in millions)September 30, 2026September 30, 2025September 30, 2026September 30, 2025
Revenue:
Healthcare Solutions$49.0$42.8$147.2$129.1
Industrial Solutions50.348.5142.2151.5
Total$99.3$91.2$289.4$280.6





3D SYSTEMS CORPORATION
Reconciliations of GAAP to Non-GAAP Measures
Presentation of Information in this Press Release
3D Systems reports its financial results in accordance with GAAP. Management also reviews and reports certain non-GAAP measures, including: adjusted revenue, non-GAAP gross profit, non-GAAP gross profit margin, non-GAAP diluted income (loss) per share, non-GAAP operating expense and Adjusted EBITDA. These non-GAAP measures exclude certain items that management does not view as part of 3D Systems’ core results as they may be highly variable, may be unusual or infrequent, are difficult to predict and can distort underlying business trends and results. Management believes that the non-GAAP measures provide useful additional insight into underlying business trends and results and provide meaningful information regarding the comparison of period-over-period results. Additionally, management uses the non-GAAP measures for planning, forecasting and evaluating business and financial performance, including allocating resources and evaluating results relative to employee compensation targets. 3D Systems’ non-GAAP measures are not calculated in accordance with or as required by GAAP and may not be calculated in the same manner as similarly titled measures used by other companies. These non-GAAP measures should thus be considered as supplemental in nature and not considered in isolation or as a substitute for the related financial information prepared in accordance with GAAP.
To calculate the non-GAAP measures, 3D Systems excludes the impact of the following items:
•amortization of intangible assets, a non-cash expense, as 3D Systems’ intangible assets were primarily acquired in connection with business combinations;
•costs incurred in connection with acquisitions and divestitures, such as legal, consulting and advisory fees;
•stock-based compensation expenses, a non-cash expense;
•charges related to restructuring and cost optimization plans, impairment charges, including goodwill, and divestiture gains or losses;
•the impact of software divestitures, which were previously included in our Industrial Solutions segment, for pre-divestiture periods in 2025;
•costs associated with CEO transition activities, including severance and executive recruitment costs; and
•costs related to significant or unusual litigation matters, including legal fees, claim-related judgments and settlements.
Amortization of intangibles and acquisition and divestiture-related costs are excluded from non-GAAP measures as the timing and magnitude of business combination transactions are not predictable, can vary significantly from period to period and the purchase price allocated to amortizable intangible assets and the related amortization period are unique to each acquisition. Amortization of intangible assets will recur in future periods until such intangible assets have been fully amortized. While intangible assets contribute to the Company’s revenue generation, the amortization of intangible assets does not directly relate to the sale of the Company’s products or services. Additionally, intangible assets amortization expense typically fluctuates based on the size and timing of the Company’s acquisition activity. Accordingly, the Company believes excluding the amortization of intangible assets enhances the Company’s and investors’ ability to compare the Company’s past financial performance with its current performance and to analyze underlying business performance and trends. Although stock-based compensation is a key incentive offered to certain of our employees, the expense is non-cash in nature, and we continue to evaluate our business performance excluding stock-based compensation; therefore, it is excluded from non-GAAP measures. Stock-based compensation expenses will recur in future periods. Charges related to restructuring and cost optimization plans, impairment charges, including goodwill, divestiture gains or losses, and the costs, including legal fees, related to significant or unusual litigation matters are excluded from non-GAAP measures as the frequency and magnitude of these activities may vary widely from period to period. Additionally, impairment charges, including goodwill, are non-cash. Furthermore, the Company believes the costs, including legal fees, related to significant or unusual litigation matters are not indicative of our core business' operations.
The matters discussed above are tax effected, as applicable, in calculating non-GAAP diluted income (loss) per share.



Adjusted EBITDA, defined as net (loss) income, plus income tax (provision) benefit, interest and other income (expense), net, stock-based compensation expense, amortization of intangible assets, depreciation expense, and other non-GAAP adjustments, all as described above, is used by management to evaluate performance and helps measure financial performance period-over-period.
Furthermore, in this press release, 3D Systems reports certain non-GAAP financial measures further adjusted to remove the operating activity related to (i) Geomagic, which the Company divested on April 1, 2025, for $119.4 million in cash, and (ii) 3DXpert and Oqton, which the Company divested on October 31, 2025, for $3.3 million in cash plus a revenue-based royalty of up to $12.9 million (together with Geomagic, the "Software Divestitures"), for periods non-comparable on a year over year basis. The Company believes excluding non-comparable periods allows it to include the operating activity related to Software Divestitures only to the extent that results are comparable year over year.
A reconciliation of GAAP to non-GAAP financial measures is provided in the accompanying schedules.
Certain columns may not add due to the use of rounded numbers. Percentages presented are calculated from the underlying numbers in thousands.
3D Systems does not provide forward-looking guidance for certain measures on a GAAP basis. The Company is unable to provide a quantitative reconciliation of forward-looking Adjusted EBITDA to the most directly comparable forward-looking GAAP measure without unreasonable effort because certain items, including litigation costs, acquisition expenses, stock-based compensation expense, intangible assets amortization expense, restructuring expenses, and goodwill impairment charges, are difficult to predict and estimate. These items are inherently uncertain and depend on various factors, many of which are beyond the Company’s control, and as such, any associated estimate and its impact on GAAP performance could vary materially.

Non-GAAP Revenue (Unaudited)
Three Months Ended Nine Months Ended
(in millions)September 30, 2026September 30, 2025September 30, 2026September 30, 2025
Revenue$99.3 $91.2 $289.4 $280.6 
Software divestitures— (1.7)— (11.8)
Revenue excluding software divestitures (Non-GAAP)$99.3 $89.5 $289.4 $268.8 
Non-GAAP Industrial Revenue (Unaudited)
Three Months Ended Nine Months Ended
(in millions)September 30, 2026September 30, 2025September 30, 2026September 30, 2025
Industrial Revenue$50.3 $48.5 $142.2$151.5
Software divestitures— (1.7)— (11.8)
Industrial Revenue excluding software divestitures (Non-GAAP)$50.3$46.7$142.2$139.7



Non-GAAP Gross Profit and Gross Profit Margin (Unaudited)
Three Months Ended
(in millions)September 30, 2026September 30, 2025
Gross Profit
Gross Profit Margin (1)
Gross Profit
Gross Profit Margin (1)
Gross profit (GAAP)$34.835.0%$29.432.3%
Amortization expense0.20.2%0.20.2%
Restructuring expense0.30.3%——%
Gross profit (Non-GAAP)$35.235.5%$29.632.5%
Software divestitures——%(1.5)(1.2)%
Gross profit excluding software divestitures (Non-GAAP)$35.235.5%$28.131.3%
(1) Calculated as non-GAAP gross profit as a percentage of total revenue.


Nine Months Ended
(in millions)September 30, 2026September 30, 2025
Gross Profit
Gross Profit Margin (1)
Gross Profit
Gross Profit Margin (1)
Gross profit (GAAP)$103.635.8%$98.3 35.0%
Amortization expense0.50.2%0.60.2%
Restructuring expense0.30.1%1.00.4%
Gross profit (Non-GAAP)$104.436.1%$99.935.6%
Software divestitures——%(10.3)(2.3)%
Gross profit excluding software divestitures (Non-GAAP)$104.436.1%$89.633.3%
(1) Calculated as non-GAAP gross profit as a percentage of total revenue.
Non-GAAP Operating Expense (Unaudited)
Three Months Ended Nine Months Ended
(in millions)September 30, 2026September 30, 2025September 30, 2026September 30, 2025
Operating expense (GAAP)$59.3$50.7$145.4$171.7
Amortization expense(0.7)(0.7)(2.2)(2.3)
Stock-based compensation expense(1.0)(1.2)(5.6)(1.8)
Acquisition and divestiture-related expense(0.1)(0.1)(0.3)(1.2)
Legal and other expense(16.2)(2.2)(19.6)(6.4)
Restructuring expense— (1.8)(0.3)(7.0)
CEO transition costs(2.3)— (2.3)— 
Asset impairment charges(2.9)— (2.9)— 
Non-GAAP operating expense$36.1$44.7$112.2$153.1
Software divestitures—(2.4)—(9.6)
Non-GAAP operating expenses excluding software divestitures$36.1$42.3$112.2$143.5



Net (Loss) Income Attributable to 3D Systems Corporation to Adjusted EBITDA (Unaudited)
Three Months Ended Nine Months Ended
(in millions)September 30, 2026September 30, 2025September 30, 2026September 30, 2025
Net (loss) income attributable to 3D Systems Corporation (GAAP)$(33.5)$(18.1)$(50.8)$49.4 
Interest expense (income), net1.5 1.1 4.6 (0.3)
Provision (benefit) for income taxes0.9 (2.6)2.8 9.1 
Depreciation expense3.9 4.2 12.2 13.1 
Amortization expense0.9 0.9 2.7 2.9 
EBITDA (Non-GAAP)(26.3)(14.4)(28.5)74.2 
Stock-based compensation expense1.0 1.2 5.6 1.8 
Acquisition and divestiture-related expense0.1 0.1 0.3 1.2 
Legal and other expense16.2 2.2 19.6 6.4 
Restructuring expense0.3 1.9 0.5 8.0 
Net loss attributable to redeemable non-controlling interest— — (0.2)— 
Loss on equity method investment, net of tax0.6 1.3 2.5 3.6 
Asset impairment charges2.9 — 2.9 — 
Gain on repurchase of debt— — — (8.2)
Gain on disposal of investment — — (2.6)— 
Gain on disposition— — — (125.7)
CEO transition costs2.3 — 2.3 — 
Other non-operating income6.1 (3.1)1.9 (1.3)
Adjusted EBITDA (Non-GAAP)$3.1 $(10.8)$4.4$(40.1)
Software divestitures— 0.8 — (0.7)
Adjusted EBITDA (Non-GAAP) excluding software divestitures$3.1 $(10.0)$4.4 $(40.8)
Diluted Loss per Share (Unaudited)
Three Months Ended Nine Months Ended
(in dollars)September 30, 2026September 30, 2025September 30, 2026September 30, 2025
Diluted (loss) income per share (GAAP)$(0.21)$(0.14)$(0.33)$0.29 
Amortization expense0.01 0.01 0.02 0.02 
Stock-based compensation expense0.01 0.01 0.04 0.01 
Acquisition and divestiture-related expense— — — 0.01 
Legal and other expense0.10 0.02 0.13 0.04 
Restructuring expense— 0.01 — 0.04 
Gain on repurchase of debt — — — (0.05)
Asset impairment charges0.02 — 0.02 — 
Gain on disposal of investment— — (0.02)— 
Gain on disposition— — — (0.70)
CEO transition costs0.01—0.02—
Loss on equity method investment and other—0.010.020.03
Tax effect of the adjustments reflected above———0.05
Non-GAAP diluted loss per share$(0.06)$(0.08)$(0.11)$(0.27)
Software divestitures———(0.01)
Non-GAAP diluted loss per share excluding software divestitures$(0.06)$(0.08)$(0.11)$(0.28)

Filing Exhibits & Attachments

4 documents

Keep reading