First Breach boosts ammo output to 20M rounds/month
New ammunition-loading and inspection equipment is already operational at Hagerstown, enabling up to 20M rounds/month after the ~175% capacity jump.
Rhea-AI Filing Summary
First Breach, Inc. (FBDT) reported that new ammunition-loading and inspection equipment has been installed and is operational at its Hagerstown, Maryland manufacturing facility. This equipment significantly increases ammunition production capacity by approximately 175%, enabling output of up to 20 million rounds per month as the company transitions to a 24-hour production schedule.
The company describes this expansion as supporting strong ammunition demand and complementing its growing drone manufacturing activities, as it builds a broader American-made defense technology platform spanning match-grade ammunition and next-generation unmanned aerial systems for commercial, law enforcement, and military markets.
Positive
- Production capacity expanded by ~175%, enabling up to 20 million rounds per month, which materially increases First Breach’s ability to meet strong ammunition demand and support its broader defense technology platform.
- New ammunition-loading and inspection equipment is installed and operational at the Hagerstown facility, indicating the capacity expansion is already in place rather than merely planned.
Negative
- None.
Filing Explained
The disclosed 20 million rounds per month is a capacity ceiling tied to the 24-hour production transition.
First Breach reports that new ammunition-loading and inspection equipment at its Hagerstown facility is installed and operational; the structural consequence disclosed is greater ammunition manufacturing capacity.
The release describes up to 20 million rounds per month as capacity while the company transitions to a 24-hour production schedule, so the figure states a ceiling tied to that operating transition.
The disclosure appears under Item 7.01 and is furnished with the Form 8-K. The supplied form note describes an 8-K as reporting specified material events within four business days.
8-K Event Classification
Key Figures
Key Terms
Regulation FD regulatory
ISO 9001:2015 technical
unmanned aerial systems technical
forward-looking statements regulatory
Private Securities Litigation Reform Act of 1995 regulatory
ISR technical
FAQ
What operational change did First Breach Inc. (FBDT) announce on September 1, 2026?
How much does the new equipment increase First Breach (FBDT) ammunition capacity?
What is First Breach’s new maximum ammunition production level after the expansion?
How does this capacity expansion fit First Breach (FBDT)’s broader strategy?
Where is First Breach’s expanded ammunition facility located?
AI-generated analysis. How Rhea-AI works. Not financial advice.
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM
CURRENT REPORT
PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Date of report (Date of earliest event reported):
(Exact Name of Registrant as Specified in Its Charter)
(State or Other Jurisdiction of Incorporation)
(Commission File Number) |
(IRS Employer Identification No.) |
| (Address of Principal Executive Offices) | (Zip Code) |
(Registrant’s Telephone Number, Including Area Code)
N/A
(Former Name or Former Address, if Changed Since Last Report)
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):
| Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) | |
| Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) | |
| Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) | |
| Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) |
Securities registered pursuant to Section 12(b) of the Act:
| Title of each class | Trading Symbols | Name of each exchange on which registered | ||
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (17 CFR §230.405) or Rule 12b-2 of the Securities Exchange Act of 1934 (17 CFR §240.12b-2).
Emerging
growth company
If
an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying
with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.
Item 7.01. Regulation FD Disclosure.
On September 1, 2026, First Breach Inc. (the “Company”) issued a press release announcing that new ammunition-loading and inspection equipment has been installed and is operational at the Company’s manufacturing facility in Hagerstown, Maryland. A copy of the press release is furnished as Exhibit 99.1 to this Current Report on Form 8-K.
The information in this Item 7.01 and Exhibit 99.1 furnished hereto shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933, as amended, or the Exchange Act, except as expressly set forth by specific reference in such a filing.
Item 9.01. Financial Statements and Exhibits.
| (d) | Exhibits |
| Exhibit No. | Description | |
| 99.1 | Press Release, dated September 1, 2026 | |
| 104 | Cover Page Interactive Data File (embedded within the Inline XBRL document) |
| 2 |
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
| Dated: September 1, 2026 | First Breach Inc. | |
| By: | /s/ Jeffrey Low | |
| Name: | Jeffrey Low | |
| Title: | Chief Executive Officer | |
| 3 |
Exhibit 99.1
First Breach Expands Ammunition Manufacturing Capacity with Installation of New Loading and Inspection Equipment
New equipment provides capacity to produce up to 20 million rounds per month, helping meet marketplace demand
HAGERSTOWN, MD / September 1, 2026 / First Breach Inc. (NASDAQ:FBDT) (“First Breach” or the “Company”), a U.S. based developer and manufacturer of defense technologies, today announced that new ammunition-loading and inspection equipment has been installed and is operational at the Company’s manufacturing facility in Hagerstown, Maryland.
The newly installed equipment significantly increases First Breach’s ammunition production capacity by approximately 175%, enabling the Company to manufacture up to 20 million rounds per month as it transitions to a 24-hour production schedule.
“The addition of this equipment reflects the continued growth of First Breach and our manufacturing operations,” said Jeffrey Low, Chief Executive Officer of First Breach. “This significant expansion provides us with the scale needed to respond to the strong demand we are seeing in the ammunition market. It also complements our growing drone manufacturing capabilities as we continue building a broader American-made defense technology platform. Across both areas, our focus remains on delivering the quality, consistency and reliability our customers expect from us.”
About First Breach
First Breach Inc. is an ISO 9001:2015 certified, American-made defense technologies company focused on manufacturing match-grade ammunition components, finished ammunition, and developing next-generation unmanned aerial systems for commercial, law enforcement, and military markets. The Company manufactures its products in-house at its Hagerstown, Maryland facility, where it produces brass cups, casings, projectiles, lead cores, lead wire, and completed ammunition with rigorous quality control standards. First Breach is also advancing its drone strategy through the development of U.S.-made unmanned systems, leveraging advanced engineering, robotics, ISR and sensor technologies, and precision manufacturing capabilities to address evolving defense, homeland security, law enforcement, and commercial requirements across domestic and international markets.
For more information, please visit: First Breach
Cautionary Note Regarding Forward-Looking Statements
This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements are not historical facts and include statements regarding the Company’s expectations, beliefs, plans, objectives, strategies, future events, future performance, business prospects, growth initiatives, acquisitions, market opportunities, capital resources, operational objectives, and other statements that are predictive in nature. Forward-looking statements may be identified by the use of words such as “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “forecast,” “intend,” “may,” “plan,” “potential,” “predict,” “project,” “seek,” “should,” “target,” “will,” “would,” and similar expressions, although not all forward-looking statements contain these identifying words.
Forward-looking statements are based on management’s current expectations, assumptions, and beliefs regarding future developments and their potential effect on the Company. These statements are not guarantees of future performance and involve known and unknown risks, uncertainties, assumptions, and other factors that may cause actual results, performance, or achievements to differ materially from those expressed or implied by such forward-looking statements.
Factors that could cause actual results to differ materially from those expressed or implied by forward-looking statements include, but are not limited to, changes in economic, business, market, competitive, regulatory, technological, legal, and geopolitical conditions; the Company’s ability to execute its business strategy; the successful integration of acquisitions and strategic transactions; access to capital and financing; customer demand; industry developments; and other risks and uncertainties described from time to time in the Company’s filings with the U.S. Securities and Exchange Commission, which are available for review at www.sec.gov.
Readers are cautioned not to place undue reliance on forward-looking statements, which speak only as of the date they are made. Except as required by applicable law, the Company undertakes no obligation to update, revise, or publicly disclose any revisions to any forward-looking statements to reflect events, circumstances, or changes in expectations occurring after the date of this press release.
Investor Relations
Frank Pogubila
Partner
Integrous Communications
Phone: 951.946.5288
Email: fpogubila@integcom.us
Website: www.firstbreach.com
For additional company updates, follow First Breach on LinkedIn, X, and Facebook.