STOCK TITAN

Vishay Intertechnology Extends 259 PHM-SI Series of Snap-in Power Aluminum Capacitors With 550 V and 600 V Ratings

(Neutral)

Sentiment and the balance of points

Rhea-AI Sentiment reads the wording of the document, how positive or negative its language is on a 1 to 5 scale. The balance of points shown with the takes weighs what the document actually discloses, so the two can disagree, for example when a trial that missed its main goal is described in upbeat language.

Vishay Intertechnology (NYSE: VSH) has expanded its snap-in power aluminum electrolytic capacitor series with higher voltage ratings. The 259 PHM-SI series now includes 550 V and 600 V devices for industrial, energy and medical applications. Vishay says the higher ratings allow designers to use fewer capacitors in series, reducing board space and component costs in high-voltage designs. Production quantities are available now, with regional lead times of 12 to 18 weeks; samples are available from catalog houses in small quantities.

Loading...
Loading translation...

Key Figures

New voltage ratings: 550 V and 600 V Capacitance configurations: 330 µF / 550 V; 330 µF / 600 V; 470 µF / 550 V; 390 µF / 600 V Ripple current ratings: 2.14 A to 2.58 A +2 more
New voltage ratings
550 V and 600 V
Extended 259 PHM-SI series
Capacitance configurations
330 µF / 550 V; 330 µF / 600 V; 470 µF / 550 V; 390 µF / 600 V
35 mm x 45 mm and 35 mm x 55 mm cases
Ripple current ratings
2.14 A to 2.58 A
259 PHM-SI series
Useful life
More than 3000 h at +105 °C; more than 10 years at ambient temperatures up to 60 °C
259 PHM-SI capacitors
Production lead time
12 to 18 weeks
Production quantities; varies by region

Key Terms

ripple current, rohs-compliant, aluminum electrolytic capacitors, pcb footprint
4 terms
ripple current technical
"offers ripple current ratings from 2.14 A to 2.58 A"
The alternating component of an electrical current that is superimposed on a steady direct current (DC), typically produced by power converters, switching regulators, or rectifiers. Ripple current causes periodic voltage variations across components such as capacitors and can increase heating and wear in those parts; designers control it by filtering, using components rated for the expected ripple, or smoothing the waveform to reduce its amplitude and frequency.
rohs-compliant regulatory
"the RoHS-compliant devices are also available"
RoHS-compliant means a product meets rules that limit or ban certain hazardous chemicals in electrical and electronic equipment, ensuring the item does not contain those restricted substances above set limits. For investors this matters because compliance affects a company's ability to sell in regulated markets, avoid fines and recalls, and manage production costs and supply-chain risks—similar to a food product following a recipe that omits banned ingredients to stay sellable and safe.
aluminum electrolytic capacitors technical
"As polarized aluminum electrolytic capacitors with a non-solid electrolyte"
Aluminum electrolytic capacitors are a type of electrical component that stores and releases electric charge using an aluminum oxide layer as the dielectric and a liquid or solid electrolyte as the counter-electrode. They provide relatively large capacitance in a compact size, are polarized (they have a positive and negative terminal and must be connected with correct polarity), and are commonly used for power supply filtering, energy smoothing, and decoupling in electronic circuits. Their performance is sensitive to temperature, voltage, and aging—leading to higher leakage current and shorter lifetime compared with some other capacitor types—so manufacturers specify rated voltage, capacitance, and expected life under defined temperature conditions.
pcb footprint technical
"achieve a smaller PCB footprint"
The PCB footprint is the pattern of copper pads, holes, solder mask openings and reference markings placed on a printed circuit board to hold and electrically connect a specific electronic component. It specifies pad shapes, sizes, spacing and drill locations so the component’s leads or terminals align and can be soldered reliably; footprints are created during PCB layout to match a component’s mechanical and soldering requirements and are often based on industry standards or manufacturer datasheets. A footprint is a design specification for the board, not the component itself, and an incorrect or non‑matching footprint can prevent proper assembly or cause soldering defects.

AI-generated analysis. How Rhea-AI works. Not financial advice.

See more from StockTitan in Google Search and AI answers. Adds StockTitan as a preferred source · opens Google
Add on Google

Devices Allow Designers to Reduce Component Counts, Save Space, Lower Costs, and Increase Reliability in High Voltage Designs

MALVERN, Pa., Nov. 17, 2026 (GLOBE NEWSWIRE) -- Vishay Intertechnology, Inc. (NYSE: VSH) today announced that it has extended its 259 PHM-SI series of snap-in power aluminum electrolytic capacitors with higher voltage ratings of 550 V and 600 V. The Vishay BCcomponents devices simplify high voltage power designs in industrial, energy, and medical applications by reducing component counts, board space requirements, and costs, while improving reliability.

To cover DC bus voltages from 800 V to 1100 V, engineers have traditionally had to rely on three 400 V to 450 V capacitors in series, which requires balancing resistors and introduces additional points of failure. With voltages up to 600 V, the devices released today allow designers to use fewer capacitors in series, eliminate or reduce the need for voltage balancing circuits, achieve a smaller PCB footprint, and lower BOM costs, while providing greater voltage headroom to improve system lifetime and reliability.

The new 550 V and 600 V capacitors offer high capacitance and voltage ratings in a range of compact sizes. Available configurations include 330 µF / 550 V and 330 µF / 600 V in the 35 mm x 45 mm case, and 470 µF / 550 V and 390 µF / 600 V in the 35 mm x 55 mm case. At these values, the 259 PHM-SI series offers ripple current ratings from 2.14 A to 2.58 A, allowing the capacitors to withstand the demanding switching currents of today’s high power converters. Featuring a cylindrical aluminum case insulated with a blue sleeve, the RoHS-compliant devices are also available with 3-pin keyed polarity snap-in terminals.

As polarized aluminum electrolytic capacitors with a non-solid electrolyte, 259 PHM-SI series devices are ideally suited for buffering, filtering, and energy storage in compact power applications. These include wallboxes and stationary electric vehicle (EV) chargers; industrial motor drives, heating and cooling systems, lamp drivers for UV water treatment systems, plasma cutters, switch cabinets, and UPS; wind turbines and solar panel inverters; and medical instrumentation. With their useful life of more than 3000 h at +105 °C, the capacitors provide more than 10 years of lifetime in ambient temperatures up to 60 °C for these applications.

Device Specification Table:

Part number259 PHM-SI
Case size (D x L in mm)22 x 25 to 35 x 60
Capacitance range39 µF to 2200 µF
Tolerance± 20 %
Ripple current at 100 Hz and +105 °C0.53 A to 4.42 A
Rated voltage200 V to 450 V500 V to 600 V
Category temperature range-40 °C to +105 °C
Useful life at +105 °C> 3000 h
Max. ESR at 100 Hz80 mΩ to 3.31 Ω
Max. impedance at 10 kHz60 mΩ to 2.44 Ω
Sectional specificationIEC 60384-4 / EN 130300
Climatic category IEC 6006840 / 105 / 5625 / 105 / 56


Samples are available from catalog houses in small quantities. Production quantities of the extended 259 PHM-SI series capacitors are available now, with lead times — depending on region — of 12 to 18 weeks. 

Vishay manufactures one of the world’s largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. Serving customers worldwide, Vishay is The DNA of tech.® Vishay Intertechnology, Inc. is a Fortune 1000 Company listed on the NYSE (VSH). More on Vishay at www.Vishay.com.

The DNA of tech® is a registered trademark of Vishay Intertechnology, Inc.

Vishay on Facebook: http://www.facebook.com/VishayIntertechnology
Vishay Twitter feed: http://twitter.com/vishayindust

Links to product datasheets:
http://www.vishay.com/ppg?28441  (259 PHM-SI)

Link to product photo:
https://www.flickr.com/photos/vishay/albums/72177720337011314

For more information please contact:
Vishay Intertechnology
Peter Henrici, +1 408 567-8400
peter.henrici@vishay.com
 or
Redpines
Bob Decker, +1 415 409-0233
bob.decker@redpinesgroup.com


Keep reading