Titan Mining (NYSE American: TII) hits battery-grade graphite purity milestones
Rhea-AI Filing Summary
Titan Mining Corporation reported metallurgical results for its Kilbourne Graphite Project that validate the concentrator design and downstream processing assumptions in its Preliminary Economic Assessment. Locked-cycle testing produced a 95.9% C(t) graphite concentrate at 91.4% recovery, exceeding the PEA design basis of 95% concentrate grade and 90% recovery.
The preferred purification flowsheet for the Secondary Transformation Plant consistently generated battery-grade purified graphite at ≥99.90% Fixed Carbon and achieved 99.99% Fixed Carbon for spherical purified graphite. Approximately 66% of concentrate was converted into spherical graphite products, above the industry average of approximately 50%. A 1,200 mt per annum demonstration plant continues to supply concentrate for pilot campaigns, customer qualification and engineering as part of the ongoing Feasibility Study.
Positive
- None.
Negative
- None.
Key Figures
Key Terms
Preliminary Economic Assessment financial
Feasibility Study financial
locked-cycle testing technical
spherical purified graphite technical
Fixed Carbon technical
quality assurance and quality control technical
National Instrument 43-101 regulatory
FAQ
What did Titan Mining (TII) validate at the Kilbourne Graphite Project?
How close is Titan Mining (TII) to producing battery-grade graphite?
What spherical graphite yield did Titan Mining (TII) report?
What role does the demonstration plant play in Titan Mining’s (TII) graphite strategy?
How is Titan Mining (TII) advancing the Secondary Transformation Plant for graphite?
Who reviewed the technical data disclosed by Titan Mining (TII)?
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Form 6-K
REPORT OF FOREIGN PRIVATE ISSUER PURSUANT TO RULE 13a-16 OR 15d-16 UNDER THE SECURITIES EXCHANGE ACT OF 1934
For the month of July 2026
Commission File Number: 001-42955
Titan Mining Corporation
(Translation of registrant's name into English)
408 Sylvia Lake Rd
Gouverneur, New York
NY 13642
(Address of principal executive office)
Indicate by check mark whether the registrant files or will file annual reports under cover of Form 20-F or Form 40-F.
Form 20-F [ ] Form 40-F [ X ]
The following documents are being submitted herewith:
| Exhibit | Description | |
| 99.1 | Press Release dated July 15, 2026 |
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
| Titan Mining Corporation | ||
| (Registrant) | ||
| Date: July 15, 2026 | /s/ Purni Parikh | |
| Purni Parikh | ||
| SVP Corporate Affairs and Corporate Secretary | ||
EXHIBIT 99.1
Titan Mining Validates Kilbourne Graphite Concentrator Flowsheet and Achieves Battery-Grade Purity
GOUVERNEUR, N.Y., July 15, 2026 (GLOBE NEWSWIRE) -- Titan Mining Corporation (NYSE-A:TII, TSX:TI), (“Titan” or the “Company”), a U.S.-focused critical minerals producer and developer, today announced positive results across its full graphite processing chain for the Kilbourne Graphite Project, from ore concentration through to battery-grade spherical graphite. The results confirm the Company's Preliminary Economic Assessment (“PEA”) design assumptions at the concentrator and demonstrate battery-grade purity and above-average yields at the downstream pilot stage, supporting the ongoing Feasibility Study and Titan's plan to build the first fully integrated U.S. graphite supply chain in over 70 years.
HIGHLIGHTS
- Concentrator flowsheet validated: Locked-cycle testing produced a 95.9% C(t) graphite concentrate at 91.4% recovery, exceeding the PEA design basis of 95% concentrate grade and 90% recovery.
- Preferred commercial purification process confirmed: Metallurgical test work selected for the preferred purification flowsheet for the Feasibility Study, consistently producing battery-grade purified graphite (≥99.90% Fixed Carbon).
- Industry-leading spherical graphite yield: Approximately 66% of concentrate converted into spherical graphite products, exceeding the industry average of approximately 50%.
- Engineering progressing across the value chain: Engineering of both the concentrator and Secondary Transformation Plant continues to advance as part of the Feasibility Study.
- Demonstration plant supporting commercialization: Ongoing production at plant with design capacity of 1,200 mt per annum, is generating representative Kilbourne concentrate for downstream pilot campaigns, customer qualification and commercial-scale engineering.
"These results confirm two things: our concentrator performs as designed in the PEA, and our downstream process turns that concentrate into battery-grade material at yields well above the industry average. Together, they de-risk the Kilbourne Feasibility Study from the mine face through to the finished product. We're now focused on completing customer qualification and advancing toward construction," said Rita Adiani, President and Chief Executive Officer of Titan.
As part of the ongoing Feasibility Study, Titan completed a metallurgical optimization program at SGS Lakefield to refine the concentrator design for the Kilbourne Graphite Project. The optimized flowsheet closely aligns with the PEA design, requiring only minor refinements to further improve performance.
Figure 1: Concentrator Design Flowsheet
Locked-cycle flotation testing produced a 95.9% C(t) graphite concentrate at 91.4% graphite recovery, exceeding the PEA design basis of 95% concentrate grade and 90% recovery. Flake size distribution also closely matched PEA assumptions, providing further confidence in the concentrator design. Variability testing across representative ore types is ongoing to support the final engineering design.
Engineering of the concentrator continues to advance, with vendor testing underway to finalize equipment sizing. In parallel, the Empire State Mine demonstration plant continues producing graphite concentrate to support downstream pilot campaigns and customer qualification activities.
Table 1: Locked Cycle Flotation Test Mass Balance
| Product | Weight | Assays, %, | Dist. % |
| % | C(t) | C(t) | |
| 11th Cleaner Concentrate | 2.81 | 95.9 | 91.4 |
| Combined Cleaner Tails | 22.0 | 0.56 | 4.15 |
| 9th Cleaner Tail | 0.14 | 5.22 | 0.25 |
| 6th Cleaner Tail | 0.57 | 12.6 | 2.42 |
| 3rd Cleaner Tail | 3.04 | 0.35 | 0.35 |
| 1st Cleaner Tail | 18.3 | 0.18 | 1.13 |
| Rougher Tail | 75.2 | 0.18 | 4.48 |
| Head | 100 | 2.96 | 100 |
Table 2: Size Fraction Analysis on Combined Concentrate
| Size Fraction | Weight | Assays, % | % Distr. |
| % | C(t) | C(t) | |
| +48 mesh | 0.0 | 0.0 | 0.0 |
| +80 mesh | 3.2 | 91.4 | 3.0 |
| +100 mesh | 3.6 | 94.0 | 3.5 |
| +200 mesh | 33.3 | 96.3 | 33.5 |
| +325 mesh | 30.5 | 97.0 | 30.8 |
| +400 mesh | 10.6 | 96.8 | 10.7 |
| -400 mesh | 19.0 | 91.5 | 18.4 |
| Total Concentrate | 100.0 | 95.9 | 100.0 |
The downstream engineering program continues to advance in parallel with the Kilbourne Feasibility Study.
Metallurgical test work has confirmed the preferred purification flowsheet for the Secondary Transformation Plant, consistently producing ≥99.90% Fixed Carbon purified micronized graphite (PMG). A thermal pretreatment step combined with the selected purification process achieved 99.99% Fixed Carbon for spherical purified graphite (SPG), supporting its suitability for lithium-ion battery applications.
The program also demonstrated an approximate 66% conversion of graphite concentrate into spherical graphite products, significantly above the industry average of approximately 50%, further enhancing the project's economics.
Representative SPG products have been dispatched for specialist coating and electrochemical testing as part of ongoing customer qualification activities. In parallel, three tonnes of representative Kilbourne graphite concentrate are being prepared for shipment to Dorfner Anzaplan in Germany for the next pilot-scale production campaign. Engineering of the Secondary Transformation Plant and evaluation of its preferred site location continue as part of the Feasibility Study.
The Company also continues to progress the evaluation of the preferred site location for the Secondary Transformation Plant, as outlined in its June 25, 2026 news release.
Qualified Persons
The scientific and technical information contained in this news release (other than in respect of the secondary transformation site) has been reviewed and approved by Oliver Peters, P.Eng., M.Sc., MBA, a Qualified Person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects ("NI 43-101").
The scientific and technical information contained in this news release related to the secondary transformation site has been reviewed and approved by Derick de Wit, FAusIMM, a Qualified Person as defined by NI 43-101.
The Qualified Person has verified the metallurgical data disclosed in this news release, including sampling information, laboratory test procedures, analytical results, calculations, and interpretations underlying the technical information presented. Verification activities included a review of sample selection and compositing procedures, chain-of-custody records, laboratory certificates, test protocols, analytical methodologies, mass balance calculations, and the reported metallurgical results. The Qualified Person also reviewed the consistency of the reported results with the underlying laboratory data and confirmed that the conclusions presented are supported by the testwork completed.
The metallurgical testwork program was conducted under a quality assurance and quality control ("QA/QC") program designed by SGS Lakefield to ensure the reliability of the results. Test procedures were developed and executed in accordance with industry-standard laboratory practices. Equipment calibration, procedural checks, duplicate analyses, and internal laboratory quality control measures were utilized, where appropriate, throughout the program. Sample preparation, handling, and testing were conducted under controlled laboratory conditions, and all analytical results were reviewed for reasonableness and internal consistency.
The metallurgical samples utilized for testing were selected to be representative of the mineralization and material types under evaluation; however, metallurgical performance can vary throughout a deposit due to changes in mineralogy, grade, weathering, and other geological factors. As with all laboratory-scale testwork, the results reported herein may not be fully representative of future plant-scale performance. Factors that may materially affect the accuracy or reliability of the reported results include sample representativity, variability in feed characteristics, analytical precision, test conditions, scale-up assumptions, and process operating parameters.
The metallurgical testwork was conducted by SGS in Lakefield, Ontario, Canada. The laboratory is independent of the Company. Testing was performed on a Master composite weighing approximately 200 kg. The test program included comminution testing and laboratory flotation testing. Analytical determinations were completed using industry-standard methods appropriate for the material and products under evaluation, including carbon analysis, sulphur analysis, ICP-OES, XRF, and particle size analysis. The Qualified Person considers the analytical and metallurgical procedures used in the program to be appropriate for the objectives of the testwork and the nature of the mineralization being evaluated.
About Titan Mining Corporation
Titan is an Augusta Group company which produces zinc concentrate at its 100%-owned Empire State Mine located in New York State. Titan is also the United States' first end-to-end producer of natural flake graphite in 70 years and is advancing graphite and germanium initiatives to strengthen domestic critical minerals supply chains. The Company has also received support from the U.S. Export-Import Bank (EXIM) under its Make More in America Initiative. Titan’s goal is to deliver shareholder value through operational excellence, development, and exploration. We have a strong commitment towards developing critical minerals assets which enhance the security of the domestic supply chain. For more information on the Company, please visit our website at www.titanminingcorp.com
Investor Relations Contact
Irina Kuznetsova
Director, Investor Relations
Phone: (778) 870-7735
Email: info@titanminingcorp.com
Media Relations Contact
KCSA Strategic Communications
Email: TitanMining@KCSA.com
Cautionary Note Regarding Forward-Looking Information
Certain statements and information contained in this news release constitute “forward-looking statements”, and “forward-looking information” within the meaning of applicable securities laws (collectively, “forward-looking statements”). These statements appear in a number of places in this news release and include, but are not limited to, statements regarding Titan's plan to build the first fully integrated U.S. graphite supply chain in over 70 years; that we're now focused on completing customer qualification and advancing toward construction; and future potential results of the Feasibility Study. When used in this news release, words such as “to be”, “believe”, “targeted”, “could”, “will”, “planned”, “expected”, “potential”, and similar expressions are intended to identify these forward-looking statements. Although the Company believes that the expectations reflected in such forward-looking statements and/or information are reasonable, undue reliance should not be placed on forward-looking statements since the Company can give no assurance that such expectations will prove to be correct. These statements involve known and unknown risks, uncertainties and other factors that may cause actual results or events to vary materially from those anticipated in such forward-looking statements, including risks relating to cost increases for capital and operating costs; risks of shortages and fluctuating costs of equipment or supplies; risks relating to fluctuations in the price of zinc and graphite; the inherently hazardous nature of mining-related activities; potential effects on our operations of environmental regulations in New York State; risks due to legal proceedings; and risks related to operation of mining projects generally; risks that the new antidumping and countervailing duties do not receive final affirmative determination by the ITC; and the risks, uncertainties and other factors identified in the Company's periodic filings with Canadian securities regulators and the United States Securities and Exchange Commission. Such forward-looking statements are based on various assumptions, including assumptions made with regard to our forecasts and expected cash flows; our projected capital and operating costs; our expectations regarding mining and metallurgical recoveries; mine life and production rates; that laws or regulations impacting mining activities will remain consistent; our approved business plans; our mineral resource estimates and results of the preliminary economic assessment; our experience with regulators; political and social support of the mining industry in New York State; our experience and knowledge of the New York State mining industry and our expectations of economic conditions and the price of zinc and graphite; demand for graphite; exploration results; the ability to secure adequate financing (as needed); the Company maintaining its current strategy and objectives; study results; permitting progress; and the Company’s ability to achieve its growth objectives. While the Company considers these assumptions to be reasonable, based on information currently available, they may prove to be incorrect. Except as required by applicable law, we assume no obligation to update or to publicly announce the results of any change to any forward-looking statement contained herein to reflect actual results, future events or developments, changes in assumptions or changes in other factors affecting the forward-looking statements. If we update any one or more forward-looking statements, no inference should be drawn that we will make additional updates with respect to those or other forward-looking statements. You should not place undue importance on forward-looking statements and should not rely upon these statements as of any other date. All forward-looking statements contained in this news release are expressly qualified in their entirety by this cautionary statement.
A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/b781b66e-2b45-4fad-bc9b-50232cc06fbd